BASIC USER’S GUIDE - download.brother.com · double-click index.html. b (Macintosh users) Double-click the Documentation CD-ROM icon, and then double-click index.html. General information

BASIC USER’S GUIDEMFC-J6510DWMFC-J6710DW

Version C

UK/IRE/GEN

If you need to call Customer Service

Please complete the following information for future reference:

Model Number: MFC-J6510DW and MFC-J6710DW (Circle your model number)

Serial Number: 1

Date of Purchase:

Place of Purchase:

1 The serial number is on the back of the unit. Retain this User's Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service.

Register your product on-line at

http://www.brother.com/registration/

© 2010 Brother Industries, Ltd.


i

User's Guides and where do I find it?

Which manual? What's in it? Where is it?

Safety and Legal Read this Guide first. Please read the Safety Instructions before you set up your machine. See this Guide for trademarks and legal limitations.

Printed / In the box

Quick Setup Guide Follow the instructions for setting up your machine and installing the drivers and software for the operating system and connection type you are using.


Basic User's Guide Learn the basic Fax, Copy, Scan and PhotoCapture Center™ operations and how to replace consumables. See troubleshooting tips.


Advanced User's Guide Learn more advanced operations: Fax, Copy, security features, printing reports and performing routine maintenance.

PDF file / Documentation CD-ROM

Software User's Guide Follow these instructions for Printing, Scanning, Network Scanning, PhotoCapture Center™, Remote Setup, PC-Fax, and using the Brother ControlCenter utility.


Network Glossary This Guide provides basic information about advanced network features of Brother machines along with explanations about general networking and common terms.


Network User's Guide This Guide provides useful information about wired and wireless network settings and security settings using the Brother machine. You can also find supported protocol information for your machine and detailed troubleshooting tips.


ii

Table of Contents (BASIC USER’S GUIDE)

1 General information 1

Using the documentation .......................................................................................1Symbols and conventions used in the documentation ....................................1

Accessing the Advanced User’s Guide, Software User’s Guide, Network User’s Guide and Network Glossary ....................................................1

Viewing Documentation...................................................................................1Accessing Brother Support (Windows®)................................................................3Accessing Brother Support (Macintosh) ................................................................3Control panel overview ..........................................................................................4

LCD screen indications....................................................................................7Basic Operations .............................................................................................8

Volume Settings.....................................................................................................8Ring Volume ....................................................................................................8Beeper Volume................................................................................................9Speaker Volume ..............................................................................................9

LCD display ...........................................................................................................9Setting the backlight brightness.......................................................................9

2 Loading paper 10

Loading paper and other print media...................................................................10Loading paper in paper tray #1......................................................................10Loading paper in paper tray #2 (MFC-J6710DW only)..................................13Loading paper in the manual feed slot ..........................................................17Loading envelopes and postcards.................................................................19Printable area ................................................................................................21

Paper settings......................................................................................................22Paper Size and Type (MFC-J6510DW).........................................................22Paper Size and Type (MFC-J6710DW).........................................................23Tray use in Copy mode (MFC-J6710DW only)..............................................23Tray use in Fax mode (MFC-J6710DW only) ................................................24Secure Paper Feed mode for A3 size Short Grain Paper .............................24

Acceptable paper and other print media..............................................................25Recommended print media ...........................................................................25Handling and using print media .....................................................................26Choosing the right print media.......................................................................27

3 Loading documents 29

How to load documents .......................................................................................29Using the ADF ...............................................................................................29Using the scanner glass ................................................................................30Scannable area .............................................................................................31

iii

4 Sending a fax 32

How to send a fax ................................................................................................32Stop faxing.....................................................................................................33Setting scanner glass size for faxing .............................................................33Colour fax transmission .................................................................................33Cancelling a fax in progress ..........................................................................33How to preview an outgoing fax ....................................................................34Transmission Verification Report...................................................................34

5 Receiving a fax 36

Receive Modes ....................................................................................................36Choose the Receive Mode ..................................................................................36Using Receive Modes..........................................................................................37

Fax Only ........................................................................................................37Fax/Tel...........................................................................................................37Manual...........................................................................................................37External TAD .................................................................................................37

Receive Mode settings ........................................................................................38Ring Delay .....................................................................................................38F/T Ring Time (Fax/Tel mode only)...............................................................38Fax Detect .....................................................................................................39

Fax Preview (Monochrome only) .........................................................................39How to preview a received fax.......................................................................39

6 Telephone and external devices 41

Voice operations ..................................................................................................41Tone or Pulse ................................................................................................41Fax/Tel mode.................................................................................................41Caller ID (U.K. and Ireland only)....................................................................41

Telephone services..............................................................................................42Setting the Telephone Line Type...................................................................42

Connecting an external TAD (telephone answering device)................................44Connections settings .....................................................................................44Recording an outgoing message (OGM) on an external TAD.......................44Multi-line connections (PBX) .........................................................................45

External and extension telephones......................................................................45Connecting an external or extension telephone ............................................45Operation from external and extension telephones.......................................46Using extension telephones (U.K. only) ........................................................46Using a cordless external telephone .............................................................47Using remote codes.......................................................................................47

iv

7 Dialling and storing numbers 49

How to dial ...........................................................................................................49Manual dialling...............................................................................................49One Touch Dialling ........................................................................................49Speed Dialling ...............................................................................................49Search ...........................................................................................................50Fax Redial .....................................................................................................50

Additional Dialling Operations..............................................................................51Outgoing Call history .....................................................................................51Caller ID history .............................................................................................51

Storing numbers ..................................................................................................52Storing a pause .............................................................................................52Storing One Touch Dial numbers ..................................................................52Storing Speed Dial numbers..........................................................................53Changing One Touch or Speed Dial names or numbers...............................54

8 Making copies 55

How to copy .........................................................................................................55Stop copying..................................................................................................55Copy settings.................................................................................................55Paper Options................................................................................................56

9 Printing photos from a memory card or USB Flash memory drive 57

PhotoCapture Center™ operations .....................................................................57Using a memory card or USB Flash memory drive .......................................57

Getting started .....................................................................................................58Print Images.........................................................................................................60

View Photos...................................................................................................60PhotoCapture Center™ print settings..................................................................60How to scan to a memory card or USB Flash memory drive...............................61

10 How to print from a computer 63

Printing a document.............................................................................................63

11 How to scan to a computer 64

Scanning a document ..........................................................................................64Scanning using the scan key ...............................................................................64Scanning using a scanner driver .........................................................................65

v

A Routine maintenance 66

Replacing the ink cartridges ................................................................................66Cleaning and checking the machine....................................................................68

Cleaning the scanner glass ...........................................................................68Cleaning the print head .................................................................................69Checking the print quality ..............................................................................70Checking the print alignment .........................................................................71

B Troubleshooting 72

Error and Maintenance messages.......................................................................72Error animations display ................................................................................79Transferring your faxes or Fax Journal report ...............................................79Document jam ..............................................................................................80Printer jam or paper jam ................................................................................81

Troubleshooting ..................................................................................................88If you are having difficulty with your machine ................................................88Dial Tone detection........................................................................................95Telephone line interference / VoIP ................................................................95

Machine Information ............................................................................................96Checking the serial number...........................................................................96Reset functions..............................................................................................96How to reset the machine..............................................................................96

C Menu and features 97

On-screen programming......................................................................................97Menu table ...........................................................................................................98Entering Text .....................................................................................................124

Inserting spaces ..........................................................................................124Making corrections ......................................................................................124Repeating letters .........................................................................................124Special characters and symbols..................................................................124

D Specifications 125

General ..............................................................................................................125Print media.........................................................................................................127Fax.....................................................................................................................129Copy ..................................................................................................................130PhotoCapture Center™ .....................................................................................131PictBridge ..........................................................................................................132Scanner .............................................................................................................133Printer ................................................................................................................134Interfaces ...........................................................................................................135Computer requirements .....................................................................................136Consumable items.............................................................................................137Network (LAN) ...................................................................................................138

E Index 139

vi

Table of Contents (ADVANCED USER’S GUIDE)The Advanced User's Guide explains the following features and operations.

You can view the Advanced User's Guide on the Documentation CD-ROM.

1 General setupMemory storageAutomatic Daylight Saving TimeSleep ModeLCD displayMode Timer

2 Security featuresSecure Function Lock 2.0

3 Sending a faxAdditional sending optionsAdditional sending operationsPolling overview

4 Receiving a faxMemory Receive (Monochrome only)Remote RetrievalAdditional receiving operationsPolling overview

5 Dialling and storing numbersVoice operationsAdditional dialling operationsAdditional ways to store numbers

6 Printing reportsFax reportsReports

7 Making copiesCopy settings

8 Printing photos from a memory card or USB Flash memory drivePhotoCapture Center™ operationsPrint ImagesPhotoCapture Center™ print settingsScan to a memory card or USB Flash memory drive

9 Printing photos from a cameraPrinting photos directly from a PictBridge cameraPrinting photos directly from a digital camera (without PictBridge)

A Routine maintenanceCleaning and checking the machinePacking and shipping the machine

B Glossary

C Index

1

11

Using the documentation 1

Thank you for buying a Brother machine! Reading the documentation will help you make the most of your machine.

Symbols and conventions used in the documentation 1

The following symbols and conventions are used throughout the documentation.

Accessing the Advanced User’s Guide, Software User’s Guide, Network User’s Guide and Network Glossary 1

This Basic User’s Guide does not contain all the information about the machine such as how to use the advanced features of the Fax, Copy, PhotoCapture Center™, Printer, Scanner, PC-Fax and Network. When you are ready to learn detailed information about these operations, read the Advanced User’s Guide, Software User’s Guide, Network User’s Guide and Network Glossary that are on the Documentation CD-ROM.

Viewing Documentation 1

a Turn on your computer. Insert the Documentation CD-ROM into your CD-ROM drive. For Windows® users, go to step c.

Note

(Windows® users) If the screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click index.html.

b (Macintosh users)Double-click the Documentation CD-ROM icon, and then double-click index.html.

General information 1

Bold Bold typeface identifies specific buttons on the machine’s control panel, or on the computer screen.

Italics Italicized typeface emphasizes an important point or refers you to a related topic.

CourierNew

Text in the Courier New font identifies messages on the LCD of the machine.

WARNINGWARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries.

CAUTIONCAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.

IMPORTANTIMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in damage to property or loss of product functionality.

Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features.

Electrical Hazard icons alert you to possible electrical shock.

Chapter 1

2

c Click your country.

d Point to your language, point to View Guide, and then click the guide you want to read.

Note

• (Windows® users only) Your Web browser may display a yellow bar at the top of the page that contains a security warning about Active X controls. For the page to display correctly you must click on the bar, click Allow Blocked Content, then click Yes in the Security Warning dialog box.

• (Windows® users only) 1 For faster access, you can copy all user documentation in PDF format to a local folder on your computer. Point to your language, then click Copy to local disk.1 Microsoft® Internet Explorer® 6.0 or greater.

How to find Scanning instructions 1

There are several ways you can scan documents. You can find the instructions as follows:

Software User’s Guide

Scanning

ControlCenter

Network Scanning

ScanSoft™ PaperPort™12SE with OCR How-to-Guides

(Windows® users)

The complete ScanSoft™ PaperPort™12SE with OCR How-to-Guides can be viewed from the Help selection in the ScanSoft™ PaperPort™12SE application.

(Windows® 2000 users need to download and install PaperPort™11SE from website.)

Presto! PageManager User’s Guide (Macintosh users)

NotePresto! PageManager must be downloaded and installed before use. See Accessing Brother Support (Macintosh) on page 3 for further instructions.

The complete Presto! PageManager User’s Guide can be viewed from the Help selection in the Presto! PageManager application.

How to find Network setup instructions 1

Your machine can be connected to a wireless or wired network. You can find basic setup instructions in the Quick Setup Guide. If your wireless access point or router supports Wi-Fi Protected Setup or AOSS™, you can also follow the steps in the Quick Setup Guide. For more information about network setup please see the Network User's Guide on the Documentation CD-ROM.

General information

3

1

Accessing Brother Support (Windows®) 1

You can find all the contacts you will need, such as Web support (Brother Solutions Center) on the Installation CD-ROM.

Click Brother Support on Top Menu. The following screen will appear:

To access our website (http://www.brother.com/), click Brother Home Page.

For the latest news and product support information (http://solutions.brother.com/), click Brother Solutions Center.

To visit our website for original Brother Supplies (http://www.brother.com/original/), click Supplies Information.

To access the Brother CreativeCenter (http://www.brother.com/creativecenter/) for FREE photo projects and printable downloads, click Brother CreativeCenter.

To return to the Top Menu, click Back or if you have finished, click Exit.

Accessing Brother Support (Macintosh) 1

You can find all the contacts you will need, such as Web support (Brother Solutions Center) on the Installation CD-ROM.

Double-click the Brother Support icon. The following screen will appear:

To download and install Presto! PageManager, click Presto! PageManager.

To register your machine from the Brother Product Register Page (http://www.brother.com/registration/), click On-Line Registration.

For the latest news and product support information (http://solutions.brother.com/), click Brother Solutions Center.

To visit our website for original Brother Supplies (http://www.brother.com/original/), click Supplies Information.

http://www.brother.com/

http://solutions.brother.com/

http://www.brother.com/original/

http://www.brother.com/creativecenter/



http://www.brother.com/original/

Chapter 1

4

Control panel overview 1

NoteMost of the illustrations in this User’s Guide show the MFC-J6710DW.

MFC-J6510DW 1

MFC-J6710DW 1

Fax Preview:OFF00

9

1 2

8 7

Fax Preview:OFF00

9

1 2

8 7

General information

5

1

10:20:2901.01.20111.01.201101.01.201110:29

Fax Mem.

6

3 54

10:20:2901.01.20111.01.201101.01.201110:29

Fax Mem.

6

3 54

Chapter 1

6

1 Fax, Telephone and Copy keys:

Duplex Copy

Press this key to copy on both sides of the paper.

N in 1 Copy

Press this key to make N in 1 or Poster copies.

Fax Preview

Lets you preview incoming and outgoing faxes on the LCD.

Tel/R

This key is used to have a telephone conversation after picking up the external handset during the F/T Ring (fast double-ring).

Also, when connected to a PBX, you can use this key to gain access to an outside line or to transfer a call to another extension.

Redial/Pause

Redials the last 30 numbers called. It also inserts a pause when programming quick dial numbers.

Paper Setting (MFC-J6510DW)

Press this key to set the paper size or paper type.

Tray Setting (MFC-J6710DW)

Press this key to choose the tray you want to use for printing.

2 Mode keys:

FAX

Lets you access Fax mode.

SCAN

Lets you access Scan mode.

COPY

Lets you access Copy mode.

PHOTO CAPTURE

Lets you access PhotoCapture Center™ mode.

3 Menu keys:

Volume keys

d c

While the machine is idle, you can press these keys to adjust the ring volume.

Phone Book key

Lets you store, look up, and dial numbers that are stored in the memory.

d or c

Press to scroll backward or forward to a menu selection.

Also, press to choose options.

a or b

Press to scroll through the menus and options.

Menu

Access the main menu.

Clear

Press to delete characters or to go back to the previous menu level.

OK

Lets you confirm a selection.

4 Dial Pad

Use these keys to dial telephone and fax numbers and as a keyboard for entering information into the machine.

The # key lets you temporarily switch the dialling mode during a telephone call from Pulse to Tone.

5 Start keys:

Mono Start

Lets you start sending faxes or making copies in monochrome. Also lets you start a scanning operation (in colour or mono depending on the scan setting in the ControlCenter software).

Colour Start

Lets you start sending faxes or making copies in full colour. Also lets you start a scanning operation (in colour or mono, depending on the scan setting in the ControlCenter software).

6 Stop/Exit

Stops an operation or exits the menu.

General information

7

1

7 LCD (Liquid Crystal Display)

Displays messages on the screen to help you set up and use your machine.

Also, you can adjust the angle of the LCD by lifting it.

8 One Touch keys

These 8 keys give you instant access to 16 previously stored numbers.

Shift

To access One Touch numbers 9 to 16, hold down Shift as you press the One Touch key.

Also, if no number is assigned to the key, you can directly store the number by pressing the empty key.

9 On/Off

You can turn the machine on and off.

Press On/Off to turn the machine on.

Press and hold down On/Off to turn the machine off. The LCD will show Shutting Down and will stay on for a few seconds before going off.

If you have connected an external telephone or TAD, it is always available.

If you turn the machine off, it will still periodically clean the print head to maintain print quality. To prolong print head life, provide the best ink cartridge economy, and maintain print quality, you should keep your machine connected to the power at all times.

LCD screen indications 1

The LCD shows the current machine status when the machine is idle.

1 Fax Preview

You can check the Fax Preview status.

2 Faxes in memory

Shows how many received faxes are in the memory.

3 Wireless Status

A four level indicator shows the current wireless signal strength if you are using a wireless connection.

4 Current Receive Mode

Lets you see the current receive mode.

Fax (Fax Only)

F/T (Fax/Tel)

TAD (External TAD)

Mnl (Manual)

5 Memory Status

Lets you see the available memory in the machine.

6 Ink indicator

Lets you see the available ink volume.

The warning icon appears when there is an error or maintenance message. For details, see Error and Maintenance messages on page 72.

NoteIf you receive a fax containing multiple paper sizes (for example, a page of A4 data and a page of A3 data), the machine may create and store a file for each paper size. The LCD may show that more than one fax job has been received.

110:20:2901.01.20111.01.201101.01.201110:29

Fax Mem.Fax Preview:OFF

2 3 4 5 6

00

1

0 Max

Chapter 1

8

Basic Operations 1

The following steps show how to change a setting in the machine. In this example the Mode Timer setting is changed from 2 minutes to 30 seconds.

a Press Menu.

b Press a or b to choose General Setup.

Press OK.

c Press a or b to choose Mode Timer.

d Press d or c to choose 30Secs.

Press OK.You can see the current setting on the LCD:

NotePress Clear to go back to the previous level.

e Press Stop/Exit.

Volume Settings 1

Ring Volume 1

You can choose a range of ring volume levels, from High to Off.

While the machine is idle, press d or c to adjust the volume level. The LCD shows the current setting, and each key press will change the volume to the next level. The machine will keep the new setting until you change it.

You can also change the volume through the menu, by following the instructions below:

Setting the Ring Volume from the menu 1

a Press Menu.

b Press a or b to choose General Setup.Press OK.

c Press a or b to choose Volume.Press OK.

d Press a or b to choose Ring.

e Press d or c to choose Low, Med, High or Off.Press OK.

f Press Stop/Exit.

MENUMENUInk Management

OK

OKGeneral SetupFaxNetwork

Select & Press

General SetupGeneral Setup

Mode Timer 2MinsTray Setting

Select & Press

VolumeAuto Daylight

OK

On


Mode Timer 30SecsTray Setting

Select & Press

VolumeAuto Daylight

OK

On


Mode Timer 30SecsTray Setting

Select & Press

VolumeAuto Daylight

OK

On

General information

9

1

Beeper Volume 1

When the beeper is on, the machine will beep when you press a key, make a mistake, or after you send or receive a fax.

You can choose a range of beeper volume levels, from High to Off.

a Press Menu.



d Press a or b to choose Beeper.


f Press Stop/Exit.

Speaker Volume 1

You can choose a range of speaker volume levels, from High to Off.

a Press Menu.



d Press a or b to choose Speaker.


f Press Stop/Exit.

LCD display 1

Setting the backlight brightness 1

If you are having difficulty reading the LCD, try changing the brightness setting.

a Press Menu.


c Press a or b to choose LCD Settings.Press OK.

d Press a or b to choose Backlight.

e Press d or c to choose Light, Med or Dark.Press OK.

f Press Stop/Exit.

10

2Loading paper and other print media 2

Note(MFC-J6710DW only)

For Tray #2, see Loading paper in paper tray #2 (MFC-J6710DW only) on page 13.

Loading paper in paper tray #1 2

a Pull the paper tray completely out of the machine.

NoteIf the paper support flap (1) is open, close it, and then close the paper support (2).

Note• When you are using A3, Legal or Ledger

size paper, press the universal guide release button (1) as you slide out the front of the paper tray. Make sure that when using Legal or A3 or Ledger size paper, the triangular mark on the output paper tray cover is aligned with the line indicating Legal (2) or A3 or Ledger (3) size, as shown in the illustration.

• If you are using A5 or smaller size paper, make sure that the paper tray is not extended.

• (MFC-J6710DW) When you load a different paper size in a tray, you will need to change the paper size setting in the machine at the same time. (See Paper Size and Type (MFC-J6710DW) on page 23.)

Loading paper 2

2

1

1

23

Loading paper

11

2

b Open the output paper tray cover (1).

c With both hands, gently press and slide the paper length guide (1) and then the paper side guides (2) to fit the paper size.Make sure that the triangular marks (3) on the paper length guide (1) and paper side guides (2) line up with the mark for the paper size you are using.

d Fan the stack of paper well to avoid paper jams and misfeeds.

NoteAlways make sure that the paper is not curled.

e Gently put the paper into the paper tray print side down and top edge in first.Check that the paper is flat in the tray.

1

2

3

1

Chapter 2

12

NoteWhen you put Photo L size into the paper tray, you need to release the hinges on both sides of the output paper tray cover, and push the cover over. And then slide the paper length guide.

f Gently adjust the paper side guides to the paper with both hands.Make sure the paper side guides touch the sides of the paper.

NoteBe careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

g Close the output paper tray cover.Check that the paper is flat in the tray and below the maximum paper mark (1).Overfilling the paper tray may cause paper jams.

h Slowly push the paper tray completely into the machine.

WARNING

DO NOT push Tray #1 into the machine too quickly. Doing this may cause injury to your hand by trapping it between Tray #1 and Tray #2. Please push Tray #1 slowly.

1

Loading paper

13

2

i While holding the paper tray in place, pull out the paper support (1) until it clicks and unfold the paper support flap (2).

NoteBefore you shorten Tray #1, take the paper out of the tray. Then shorten the tray by pressing the universal guide release button (1). Adjust the paper length guide (2) to fit the paper size you are going to use. Then put the paper into the tray.

Loading paper in paper tray #2 (MFC-J6710DW only) 2

Note• You can only use plain paper sizes A4,

A3, Ledger, Letter or Legal in Tray #2.

• When you use the Borderless printing feature paper must be fed from Tray #1.

a Pull the paper tray completely out of the machine.

Note• If you are using A3, Ledger or Legal size

paper, press the universal guide release button (1) as you slide out the front of the paper tray until it clicks.

• You can check if the length of the tray is adjusted correctly by opening the paper tray cover.

1

2

1

2

1

Chapter 2

14

b Open the paper tray cover (1).

c Using both hands, gently press and slide the paper length guide (1) and then the paper side guides (2) to fit the paper size.Make sure that the triangular marks (3) on the paper length guide (1) and paper side guides (2) line up with the marks for the paper size you are using.

d Fan the stack of paper well to avoid paper jams and misfeeds.

NoteAlways make sure that the paper is not curled.

e Gently put the paper into the paper tray print side down and top edge in first.Check that the paper is flat in the tray and below the maximum paper mark (1).Overfilling the paper tray may cause paper jams.

f Using both hands, gently adjust the paper side guides so they touch the sides of the paper stack.

1

2

3

1

1

Loading paper

15

2

NoteBe careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

g Close the paper tray cover.

h Slowly push the paper tray back into the machine.

i Do one of the following:

If you are using A3, Ledger or Legal size paper, go to step j.

NoteWhen you are using large size paper in Tray #2, you may need to extend Tray #1 out over Tray #2 to prevent printed pages from falling off the output tray.

If you are using A4 or Letter size paper, go to step m.

j Pull tray #1 out of the machine.Press the universal guide release button (1) as you slide out the front of the paper tray.

k Open the output paper tray cover and adjust the paper length guide (1) for the paper.

1

1

Chapter 2

16

l Close the output paper tray cover and slowly push the paper tray into the machine.

m Pull out the paper support (1) until it clicks and unfold the paper support flap (2).

NoteIf you are finished using A3, Ledger or Legal size paper and want to use a smaller paper size, take the paper out of the tray. Then shorten the tray by pressing the universal guide release button (1). Adjust the paper length guide (2) to fit the paper size you are going to use. Then put the smaller paper into the tray.

1

2

1

2

Loading paper

17

2

Loading paper in the manual feed slot 2

You can load special print media one at a time into this slot. Use the manual feed slot to print or copy on envelopes, labels or thicker paper.

Note• The machine automatically turns on the

Manual Feed mode when you put paper in the manual feed slot.


a Open the manual feed slot cover.

b Slide the manual feed slot paper guides to fit the paper width that you are going to use.

c Put only one sheet of paper in the manual feed slot with the side to be printed face up.

IMPORTANT• DO NOT put more than one sheet of paper

in the manual feed slot at any time. Doing this may cause a paper jam. Wait until the LCD shows Put paper in Manual Feed SlotThen Press Start before you feed the next sheet of paper in the manual feed slot.

• DO NOT put paper in the manual feed slot when you are printing from Tray #1 or Tray #2. Doing this may cause a paper jam.

Chapter 2

18

d Using both hands gently adjust the manual feed slot paper guides to fit the paper.

Note• DO NOT press the paper guides too tightly

against the paper. Doing this may cause the paper to fold.

• Place the paper in the centre of the manual feed slot between the paper guides. If the paper is not centred, pull it out and insert it again at the centre position.

e Using both hands, put one sheet of paper in the manual feed slot until the front edge touches the paper feed roller and the machine beeps. Let go of the paper when you feel the machine feed the paper in a short distance. The LCD will show Manual Feed Slot ready.

NoteWhen loading an envelope, or a sheet of thick paper, push the envelope into the manual feed slot until you feel it grab the envelope.

f If the data does not fit on one page, the LCD will prompt you to load another page. Place another sheet of paper in the manual feed slot, and then press Mono Start or Colour Start.

Note• Make sure printing has finished before you

close the manual feed slot.

• When paper is placed in the manual feed slot, the machine always prints from the manual feed slot.

• Paper inserted in the manual feed slot while a test page, fax or report is being printed will be ejected.

• During the machine's cleaning process, paper you place in the manual feed slot will be ejected. Wait until the machine finishes its cleaning, and then put the paper into the manual feed slot again.

Loading paper

19

2

Loading envelopes and postcards 2

About envelopes 2

Use envelopes that weigh between 80 to

95 g/m2.

Some envelopes need margin settings to be set in the application. Make sure you do a test print first before printing many envelopes.

IMPORTANTDO NOT use any of the following types of envelopes, as they will cause paper feed problems:

• That are of a baggy construction.

• That have windows.

• That are embossed (have raised writing on them).

• That have clasps or staples.

• That are pre-printed on the inside.

Occasionally you may experience paper feed problems caused by the thickness, size and flap shape of the envelopes you are using.

Loading envelopes and postcards 2

a Before loading, press the corners and sides of envelopes or postcards to make them as flat as possible.

IMPORTANTIf envelopes or postcards are “double-feeding”, put one envelope or postcard in the paper tray at a time.

Glue Double flaps

Chapter 2

20

b Put envelopes or postcards in the paper tray with the address side down and the leading edge (top of the envelopes) in first. Using both hands, gently press and slide the paper length guide (1) and paper side guides (2) to fit the size of the envelopes or postcards.

If you have problems when printing on envelopes, try the following suggestions:2

a Open the envelope flap.

b Make sure the open flap is to the back edge of the envelope when printing.

c Adjust the size and margin in your application.

2

1

Loading paper

21

2

Printable area 2

The printable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut sheet paper and envelopes. The machine can print in the shaded areas of cut sheet paper when the Borderless print feature is available and turned on.

(See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide.)

1 The top margin of Y4 envelopes is 12 mm.

Note• The Borderless feature is not available for envelopes and duplex printing.


Cut Sheet Paper Envelopes

Top (1) Bottom (2) Left (3) Right (4)

Cut Sheet 3 mm 3 mm 3 mm 3 mm

Cut Sheet (Duplex print when using A3, Ledger or B4 size)

22 mm 22 mm 3 mm 3 mm

Envelopes 22 mm 1 22 mm 3 mm 3 mm

3 41

2

3 41

2

Chapter 2

22

Paper settings 2

Paper Size and Type (MFC-J6510DW) 2

Paper Type 2

To get the best print quality, set the machine for the type of paper you are using.

a Press Paper Setting.

b Press a or b to choose Paper Type.

c Press d or c to choose Plain Paper, Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Transparency.Press OK.

d Press a or b to choose Complete.Press OK.

NoteThe machine ejects paper with printed surfaces face up onto the paper tray in front of the machine. When you use transparencies or glossy paper, remove each sheet at once to prevent smudging or paper jams.

Paper Size 2

You can use seven sizes of paper for printing copies: A4, A5, A3, 10 15 cm, Letter, Legal and Ledger and five sizes for printing faxes: A4, A3, Ledger, Letter and Legal. When you change the size of paper you load in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page.

a Press Paper Setting.

b Press a or b to choose Paper Size.

c Press d or c to choose A4, A5, A3, 10x15cm, Letter, Legal or Ledger.Press OK.


Loading paper

23

2

Paper Size and Type (MFC-J6710DW) 2

To get the best print quality, set the machine for the type of paper you are using.

You can use seven sizes of paper for printing copies: A4, A5, A3, 10 15 cm, Letter, Legal and Ledger and five sizes for printing faxes: A4, A3, Ledger, Letter and Legal. When you load a different size of paper in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page.

a Press Tray Setting.

b Press a or b to choose Tray#1 or Tray#2.Press OK.

c Do one of the following:

If you chose Tray#1, press a or b to choose Paper Type and press d or c to choose Plain Paper, Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Transparency. Press OK.

Press a or b to choose Paper Size and press d or c to choose A4, A5, A3, 10x15cm, Letter, Legal or Ledger. Press OK.

If you chose Tray#2, press a or b to choose Paper Size and press d or c to choose A4, A3, Letter, Legal or Ledger. Press OK.


e Press a or b to choose Complete.Press OK.

Note• You can only use plain paper and paper

sizes A3, A4, Ledger, Letter or Legal in Tray#2.

• The machine ejects paper with printed surfaces face up onto the paper tray in front of the machine. When you use transparencies or glossy paper, remove each sheet at once to prevent smudging or paper jams.

Tray use in Copy mode (MFC-J6710DW only) 2

You can change the default tray the machine will use for printing copies.

Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu.

To change the default setting follow the instructions below:


b Press a or b to choose Tray Use:Copy.

c Press d or c to choose Tray#1, Tray#2 or Auto Select.Press OK.


NoteYou can change the paper size and tray selection temporarily for the next copy. (See Paper Size on page 56 and Tray Select (MFC-J6710DW only) on page 56.)

Chapter 2

24

Tray use in Fax mode (MFC-J6710DW only) 2

You can change the default tray the machine will use for printing received faxes.

Auto Select will allow your machine to take paper from Tray #1 first, or from Tray #2 if:

Tray #2 is set to a different paper size that is more suitable for the received faxes.

Both trays are using the same size paper and Tray #1 is not set to use plain paper.


b Press a or b to choose Tray Use:Fax.

c Press d or c to choose Tray#1, Tray#2 or Auto Select.Press OK.


Secure Paper Feed mode for A3 size Short Grain Paper 2

If your prints have horizontal lines when using A3 paper, your paper may be long grain paper. Set A3 - Short Grain to Off to avoid this problem.

a Press Menu.


c Press a or b to choose A3 - Short Grain.

d Press d or c to choose Off.Press OK.

e Press Stop/Exit.

Note• If you are not sure about the type of paper

you are using, consult the paper packaging or manufacturer for paper specifications.

• Printing will be slower when using the A3 - Short Grain setting On.

Loading paper

25

2

Acceptable paper and other print media 2

The print quality can be affected by the type of paper you use in the machine.

To get the best print quality for the settings you have chosen, always set the Paper Type to match the type of paper you load.

You can use plain paper, inkjet paper (coated paper), glossy paper, transparencies and envelopes.

We recommend testing various paper types before buying large quantities.

For best results, use Brother paper.

When you print on inkjet paper (coated paper), transparencies and glossy paper, be sure to choose the correct print media in the “Basic” tab of the printer driver or in the Paper Type setting of the menu. (See Paper Type on page 22.)

When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose.

When you use transparencies or photo paper, remove each sheet at once to prevent smudging or paper jams.

Avoid touching the printed surface of the paper immediately after printing; the surface may not be completely dry and may stain your fingers.

Recommended print media 2

To get the best print quality, we suggest using Brother paper. (See the table below.)

If Brother paper is not available in your country, we recommend testing various papers before purchasing large quantities.

We recommend using “3M Transparency Film” when you print on transparencies.

Brother paper

Paper Type Item

A3 Plain BP60PA3

A3 Glossy Photo BP71GA3

A3 Inkjet (Matte) BP60MA3

A4 Plain BP60PA

A4 Glossy Photo BP71GA4

A4 Inkjet (Matte) BP60MA

10 15 cm Glossy Photo

BP71GP

Chapter 2

26

Handling and using print media 2

Store paper in its original packaging, and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.

Avoid touching the shiny (coated) side of photo paper. Load photo paper with the shiny side facing down.

Avoid touching either side of transparencies because they absorb water and perspiration easily, and this may cause decreased output quality. Transparencies designed for laser printers/copiers may stain your next document. Use only transparencies recommended for inkjet printing.

IMPORTANTDO NOT use the following kinds of paper:

• Damaged, curled, wrinkled, or irregularly shaped paper

1 2 mm or greater curl may cause jams to occur.

• Extremely shiny or highly textured paper

• Paper that cannot be arranged uniformly when stacked

• Short grain paper

Labels 2

Labels should be arranged so that they cover the entire length and width of the sheet. Using labels with spaces may result in labels peeling off and causing serious jams or print problems.

Types of labels to avoid 2

Do not use labels that are damaged, curled, wrinkled or an unusual shape.

IMPORTANT• DO NOT feed part used label sheets. The

exposed carrier sheet will damage your machine.

• DO NOT reuse or insert labels that have previously been used or are missing few labels on the sheet.

Paper capacity of the output paper tray cover 2

Up to 50 sheets of 80 g/m2 A4 paper.

Transparencies and photo paper must be picked up from the output paper tray cover one page at a time to avoid smudging.

1

1

Loading paper

27

2

Choosing the right print media 2

Paper type and size for each operation 2

1 Manual Feed Slot only

Paper Type Paper Size Usage

Fax Copy Photo Capture

Printer

Cut Sheet A3 297 420 mm (11.7 16.5 in.) Yes Yes Yes Yes

A4 210 297 mm (8.3 11.7 in.) Yes Yes Yes Yes

Ledger 279.4 431.8 mm (11 17 in.) Yes Yes Yes Yes

Letter 215.9 279.4 mm (8 1/2 11 in.) Yes Yes Yes Yes

Legal 215.9 355.6 mm (8 1/2 14 in.) Yes Yes – Yes

Executive 184 267 mm (7 1/4 10 1/2 in.) – – – Yes

JIS B4 257 364 mm (10.1 14.3 in.) – – – User Defined

JIS B5 182 257 mm (7.2 10.1 in.) – – – User Defined

A5 148 210 mm (5.8 8.3 in.) – Yes – Yes

A6 105 148 mm (4.1 5.8 in.) – – – Yes

Cards Photo 10 15 cm (4 6 in.) – Yes Yes Yes

Photo L 89 127 mm (3 1/2 5 in.) – – – Yes

Photo 2L 13 18 cm (5 7 in.) – – Yes Yes

Index Card 127 203 mm (5 8 in.) – – – Yes

Postcard 1 100 148 mm (3.9 5.8 in.) – – – User Defined

Postcard 2 (Double)

148 200 mm (5.8 7.9 in.) – – – User Defined

Envelopes C5 Envelope 162 229 mm (6.4 9 in.) – – – Yes

DL Envelope 110 220 mm (4.3 8.7 in.) – – – Yes

COM-10 105 241 mm (4 1/8 9 1/2 in.) – – – Yes

Monarch 98 191 mm (3 7/8 7 1/2 in.) – – – Yes

Y4 Envelope 105 235 mm (4.1 9.3 in.) – – – Yes

Transparencies A4 210 297 mm (8.3 11.7 in.) – Yes – Yes

Letter 215.9 279.4 mm (8 1/2 11 in.) – Yes – Yes

Legal 215.9 355.6 mm (8 1/2 14 in.) – Yes – Yes

A5 148 210 mm (5.8 8.3 in.) – Yes – Yes

Labels 1 – – – User Defined

Chapter 2

28

Paper capacity of the paper trays 2

1 Up to 250 sheets of 80 g/m2 paper.

Paper weight and thickness 2

1 BP71 (260 g/m2) paper is especially designed for Brother inkjet machines.

Paper size Paper types No. of sheets

Tray #1 A4, Ledger, A3, Legal, Executive, Letter, A5, A6, JIS B4, JIS B5, Envelopes (commercial No.10, DL, C5, Monarch, Y4), Photo, Photo L, Photo 2L, Index Card, Postcard 1, Postcard 2

Plain Paper 250 1

Inkjet Paper 20

Glossy Paper, Photo 20

Index Card, Postcard 30

Envelopes, Transparencies 10

Tray #2 (MFC-J6710DW only)

A4, Ledger, A3, Legal, Executive, Letter, JIS B4, JIS B5

Plain Paper 250 1

Manual Feed Slot A4, Ledger, A3, Legal, Executive, Letter, A5, A6, JIS B4, JIS B5, Envelopes (commercial No.10, DL, C5, Monarch, Y4), Photo, Photo L, Photo 2L, Index Card, Postcard 1, Postcard 2

Plain Paper, Inkjet Paper, Glossy Paper, Envelopes, Transparencies and Labels

1

Paper Type Weight Thickness

Cut Sheet Plain Paper 64 to 120 g/m2 0.08 to 0.15 mm

(Tray #2)

Plain Paper

64 to 105 g/m2 0.08 to 0.15 mm

Inkjet Paper 64 to 200 g/m2 0.08 to 0.25 mm

Glossy Paper 1 Up to 220 g/m2 Up to 0.25 mm

Cards Photo Card 1 Up to 220 g/m2 Up to 0.25 mm

Index Card Up to 120 g/m2 Up to 0.15 mm

Postcard 1

Postcard 2

Up to 200 g/m2 Up to 0.25 mm

Envelopes 75 to 95 g/m2 Up to 0.52 mm

Transparencies – –

Labels – –

29

3

3

How to load documents 3

You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass.

Using the ADF 3

The ADF can hold up to 35 pages and feeds each sheet individually. Use standard

80 g/m2 paper and always fan the pages before putting them in the ADF.

Document Sizes Supported 3

Recommended Paper: 80 g/m2 A4


IMPORTANT• DO NOT pull on the document while it is

feeding.

• DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.

• DO NOT use cardboard, newspaper or fabric.

Make sure documents written with ink are completely dry.

a Unfold the ADF Document Support (1) and the ADF Document Output Support Flap (2).

b Fan the pages well.

c Adjust the paper guides (1) to fit the width of your documents.

d Place your documents, face up, top edge first in the ADF until you feel them touch the feed rollers.

IMPORTANTDO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.

Loading documents 3

Length: 148 to 431.8 mm

Width: 148 to 297 mm

Weight: 64 to 90 g/m2

1 2

1

Chapter 3

30

Using the scanner glass 3

You can use the scanner glass to fax, copy or scan pages of a book or one page at a time.

Document Sizes Supported 3


NoteTo use the scanner glass, the ADF must be empty.

a Lift the document cover.

b Using the document guidelines on the left and top, place the document face down in the upper left corner of the scanner glass.

c Close the document cover.

IMPORTANTIf you are scanning a book or thick document, DO NOT slam the cover down or press on it.

Length: Up to 431.8 mm

Width: Up to 297 mm

Weight: Up to 2 kg

Loading documents

31

3

Scannable area 3

The scannable area depends on the settings in the application you are using. The figures below show unscannable areas.

1 The unscannable area is 1 mm when you use the ADF.

Usage Document Size

Top (1)

Bottom (2)

Left (3)

Right (4)

Fax A3 3 mm 4.5 mm

A4 3 mm 3 mm 1

Ledger 3 mm 3.7 mm

Letter 3 mm 4 mm

Legal

Copy All paper sizes

3 mm 3 mm

Scan

3 41

2

32

4How to send a fax 4

The following steps show how to send a fax.

a When you want to send a fax, or change

fax send or receive settings, press the

(FAX) key to illuminate it in blue.

The LCD shows:

b Do one of the following to load your document:

Place the document face up in the ADF. (See Using the ADF on page 29.)

Load your document face down on the scanner glass. (See Using the scanner glass on page 30.)

Note• To send colour faxes with multiple pages

use the ADF.

• If you send a mono fax from the ADF when the memory is full it will be sent in real time.

• You can use the scanner glass to fax pages of a book one at a time. The documents can be up to A3 or Ledger size.

• Since you can only scan one page at a time, it is easier to use the ADF if you are sending a multiple page document.

c You can change the following fax sending settings. Press FAX and then press a or b to scroll through the fax settings. When the setting you want is highlighted, then press d or c to choose your option, and press OK.

(Basic User's Guide)

For details changing the following fax sending settings, see pages 33 to 35.

Glass ScanSize

Colour Fax Transmission

Preview Outgoing Fax

Transmission Verification Report (Setup)

(Advanced User's Guide)

For more advanced fax sending operations and settings, see Chapter 3 Sending a fax in the Advanced User’s Guide:

Contrast

Fax Resolution

Set New Defaults

Factory Reset

Faxing at End of Call

Broadcasting

Real Time TX

Overseas Mode

Delayed Fax

Batch TX

Canceling Waiting Jobs

Polled Transmit

Sending a fax 4

FAXFAX Fax Press StartEnter Number

Fax Resolution StandardContrast AutoGlass ScanSize A4

Sending a fax

33

4

d Enter the fax number.

Using the dial pad

Using the Phone Book

Phone Book

Using call history

Outgoing Call

Caller ID hist.

NoteYou can preview a fax message before sending it by setting Fax Preview to ON. (See How to preview an outgoing fax on page 34.)

e Press Mono Start or Colour Start.

Faxing from the ADF

The machine starts scanning the document.

Faxing from the scanner glass

When you press Mono Start, the machine starts scanning the first page.

Do one of the following:

• To send a single page, press 2 to choose No(Send) (or press Mono Start again).

The machine starts sending the document.

• To send more than one page, press 1 to choose Yes and place the next page on the scanner glass. Press OK. The machine starts scanning the page. (Repeat this step for each additional page.)

If you press Colour Start, the machine starts sending the document.

Stop faxing 4

To stop faxing, press Stop/Exit.

Setting scanner glass size for faxing 4

When documents are Letter size, you need to set Scan Size to Letter. If you do not, the side portion of the faxes will be missing.

a Press (FAX).

b Press a or b to choose Glass ScanSize.

c Press d or c to choose A4, A3, Letter, Legal or Ledger.Press OK.

Note• You can save the setting you use most

often by setting it as default. (See Setting your changes as a new default in chapter 3 of the Advanced User’s Guide.)

• This setting is only available for sending documents from the scanner glass.

Colour fax transmission 4

Your machine can send a colour fax to machines that support this feature.

Colour faxes cannot be stored in the memory. When you send a colour fax, the machine will send it in real time (even if Real Time TX is set to Off).

Cancelling a fax in progress 4

If you want to cancel a fax while the machine is scanning, dialling or sending, press Stop/Exit.

Chapter 4

34

How to preview an outgoing fax 4

You can preview a fax message before you send it. You must set the Real Time Transmission and Polling RX to Off before you use this feature.

a Press (FAX).

b Load the document.

c Enter the fax number using the dial pad, One Touch or Speed Dial.

d Press Fax Preview.The machine starts scanning the document and the outgoing fax appears on the LCD. When the fax is open the control panel keys will perform the operations shown below.

NoteIf you preview a colour fax before it is sent, you will only be able to send it in black & white. To send a colour fax do not press the Fax Preview key.

e Press Mono Start.

NoteThe fax message in the memory will be sent and then erased when you press Mono Start.

Transmission Verification Report 4

You can use the Transmission Verification Report as proof that you sent a fax. This report lists the sender’s name or fax number, the time and date of transmission, duration of transmission, number of pages sent, and whether or not the transmission was successful.

There are several settings available for the Transmission Verification Report:

On: Prints a report after every fax you send.

On+Image: Prints a report after every fax you send. A portion of the fax’s first page appears on the report.

Off: Prints a report if your fax is unsuccessful due to a transmission error. The report will also print if the receiving machine modifies the size of the document you fax. Off is the default setting.

Off+Image: Prints a report if your fax is unsuccessful due to a transmission error. The report will also print if your fax is successful, but the receiving machine modifies the size of the document you fax. A portion of the fax’s first page appears on the report.

Off2: Prints a report only if your fax is unsuccessful due to a transmission error.

Off2+Image: Prints a report only if your fax is unsuccessful due to a transmission error. A portion of the fax’s first page appears on the report.

Key Description

Enlarge the fax.

Reduce the fax.

a or b Scroll vertically.

d or c Scroll horizontally.

Rotate the fax clockwise.

Go back to the previous page.

Go to the next page.

Sending a fax

35

4

a Press Menu.

b Press a or b to choose Fax.Press OK.

c Press a or b to choose Report Setting.Press OK.

d Press a or b to choose XMIT Report.

e Press d or c to choose On, On+Image, Off, Off+Image, Off2 or Off2+Image.Press OK.

f Press Stop/Exit.

Note• If you choose On+Image, Off+Image or Off2+Image the image will only appear on the Transmission Verification Report if Real Time Transmission is set to Off. (See Real Time Transmission in chapter 3 of the Advanced User’s Guide.)

• If your transmission is successful, "OK" will appear next to "RESULT" on the Transmission Verification Report. If transmission is not successful, "ERROR" will appear next to "RESULT".

36

5Receive Modes 5

You must choose a receive mode depending on the external devices and telephone services you have on your line.

Choose the Receive Mode 5

By default, your machine will automatically receive any faxes that are sent to it. The diagram below will help you choose the correct mode.

For more detailed information on the receive modes, see Using Receive Modes on page 37.

To set a receive mode follow the instructions below:

a Press Menu.

b Press a or b to choose Initial Setup.Press OK.

c Press a or b to choose Receive Mode.

d Press d or c to choose Fax Only, Fax/Tel, External TAD or Manual.Press OK.

e Press Stop/Exit.The LCD will display the current receive mode.

Receiving a fax 5

Do you want to use the telephone features of your machine (if available) or an external telephone or external telephone answering device connected on the same line as the machine?

Yes

Fax Only

No

No

NoManual

YesExternal TAD

Fax/Tel

Are you using the voice message function of an external telephone answering device?

Do you want the machine to answer fax and telephone calls automatically?

Yes

Receiving a fax

37

5

Using Receive Modes 5

Some receive modes answer automatically (Fax Only and Fax/Tel). You may want to change the ring delay before using these modes. (See Ring Delay on page 38.)

Fax Only 5

Fax Only mode will automatically answer every call as a fax call.

Fax/Tel 5

Fax/Tel mode helps you automatically manage incoming calls, by recognising whether they are fax or voice calls and dealing with them in one of the following ways:

Faxes will be automatically received.

Voice calls will start the F/T Ring to tell you to pick up the line. The F/T Ring is a fast double-ring made by your machine.

(Also see F/T Ring Time (Fax/Tel mode only) on page 38 and Ring Delay on page 38.)

Manual 5

Manual mode turns off all automatic answering functions unless you are using the BT Call Sign feature.

To receive a fax in manual mode lift the handset of an external telephone. When you hear fax tones (short repeating beeps), press Mono Start or Colour Start and choose Receive. You can also use the Fax Detect feature to receive faxes by lifting a handset on the same line as the machine.

(Also see Fax Detect on page 39.)

External TAD 5

External TAD mode lets an external answering device manage your incoming calls. Incoming calls will be dealt with in one of the following ways:

Faxes will be automatically received.

Voice callers can record a message on the external TAD.

(For more information see Connecting an external TAD (telephone answering device) on page 44.)

Chapter 5

38

Receive Mode settings 5

Ring Delay 5

The Ring Delay sets the number of times the machine rings before it answers in Fax Only or Fax/Tel mode. If you have external or extension telephones on the same line as the machine choose the maximum number of rings.

(See Operation from external and extension telephones on page 46 and Fax Detect on page 39.)

a Press Menu.


c Press a or b to choose Setup Receive.Press OK.

d Press a or b to choose Ring Delay.

e Press d or c to choose how many times the line rings before the machine answers.Press OK.If you choose 0, the line will not ring at all.

f Press Stop/Exit.

F/T Ring Time (Fax/Tel mode only) 5

When somebody calls your machine, you and your caller will hear the normal telephone ring sound. The number of rings is set by the ring delay setting.

If the call is a fax, then your machine will receive it; however, if it is a voice call the machine will sound the F/T Ring (a fast double-ring) for the time you have set in the F/T Ring Time setting. If you hear the F/T Ring it means that you have a voice caller on the line.

Because the F/T Ring is made by the machine, extension and external telephones will not ring; however, you can still answer the call on any telephone. (For more information see Using remote codes on page 47.)

a Press Menu.



d Press a or b to choose F/T Ring Time.

e Press d or c to choose how long the machine will ring to alert you that you have a voice call (20, 30, 40 or 70 seconds).Press OK.

f Press Stop/Exit.

NoteEven if the caller hangs up during the fast double-ring, the machine will continue to ring for the set time.

Receiving a fax

39

5

Fax Detect 5

If Fax Detect is On: 5

The machine receives a fax call automatically, even if you answer the call. When you see Receiving on the LCD or when you hear “chirps” through the handset you are using, just replace the handset. Your machine will do the rest.

If Fax Detect is Off: 5

If you are at the machine and answer a fax call by lifting the handset, press Mono Start or Colour Start, then press 2 to receive the fax.

If you answered at an extension or external telephone, press l 5 1. (See Operation from external and extension telephones on page 46.)

Note• If this feature is set to On, but your

machine does not connect a fax call when you lift an extension or external telephone handset, press the remote activation code l 5 1.

• If you send faxes from a computer on the same telephone line and the machine intercepts them, set Fax Detect to Off.

a Press Menu.



d Press a or b to choose Fax Detect.

e Press d or c to choose On (or Off).Press OK.

f Press Stop/Exit.

Fax Preview (Monochrome only) 5

How to preview a received fax5

You can view received faxes on the LCD by pressing the Fax Preview key. When the machine is in Ready mode, a popup message will appear on the LCD to alert you of new faxes.

Setting Fax Preview 5

a Press Fax Preview.

b Press 1 to choose Yes.The LCD asks you again to confirm because faxes will viewed instead of automatically printed.Press 1 to choose OK.

Note• When Fax Preview is turned on, a backup

copy of received faxes will not be printed for Fax Forwarding and PC-Fax Receiving operations, even if you have set Backup Print to On.

• Fax Preview is not available when Fax Forwarding is turned on.

Chapter 5

40

Using Fax Preview 5

When you receive a fax, you will see the pop-up message on the LCD. (For example: New Fax(es): 02)

a Press Fax Preview.You can see the new fax list.

Note• If you receive a fax containing multiple

paper sizes (for example, a page of A4 data and a page of A3 data), the machine may create and store a file for each paper size. The LCD may show that more than one fax job has been received.

• You can also see your old fax list by pressing l. Press # to go back to your new fax list.

b Press a or b to choose the fax you want to see.Press OK.

Note• If your fax is large there may be a delay

before it is displayed on the LCD.

• The LCD will show the current page number and total pages of the fax message. When your fax message is over 99 pages the total number of pages will be shown as “XX“.

c Press Stop/Exit.

When a fax is open the control panel keys will perform the operations shown below.

How to delete all faxes in the list 5


b Press a or b to choose Delete All.Press OK.Press 1 to confirm.

c Press Stop/Exit.

How to print all faxes in the list 5


b Press a or b to choose Print All.Press OK.

c Press Stop/Exit.

Key Description

Enlarge the fax.

Reduce the fax.

a or b Scroll vertically.

d or c Scroll horizontally.

Rotate the fax clockwise.

Delete the fax.

Press 1 to confirm.

Go back to the previous page.

Go to the next page.

Go to the next step.

(Print, Back and Exit are available.)

Go back to the fax list.

Mono Start

Print the fax.


Press 1 to print the whole message.

Press 2 to print only the displayed page.

Press 3 to print from the displayed page.

(After printing, you can choose to delete or re-print the fax.)

41

6

6

Voice operations 6

Tone or Pulse 6

If you have a Pulse dialling service, but need to send tone signals (for example, for telephone banking), follow the instructions below:

a Pick up the handset of the external telephone.

b Press # on the machine’s control panel. Any digits dialled after this will send tone signals.

When you hang up, the machine will return to the Pulse dialling service.

Fax/Tel mode 6

When the machine is in Fax/Tel mode, it will use the F/T Ring (fast double-ring) to alert you to pick up a voice call.

If you are at an external telephone, lift the handset of the external telephone, and then press Tel/R to answer.

If you are at an extension telephone, you'll need to lift the handset during the F/T Ring Time and then press # 5 1 between the fast double-rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the machine by pressing l 5 1.

Caller ID (U.K. and Ireland only) 6

The Caller ID feature lets you use the Caller ID subscriber service offered by many local telephone companies. Call your telephone company for details. This service shows the telephone number, or name if it is available, of your caller as the line rings.

After a few rings, the LCD shows the telephone number of your caller (and name, if available). Once you answer a call, the Caller ID information disappears from the LCD, but the call information stays stored in the Caller ID memory.

You can view the list or choose one of these numbers to fax to, add to One Touch or Speed Dial, or delete from the history. (See Caller ID history on page 51.)

You can see the first 20 characters of the number (or name).

The ID Unknown message means the call originated outside your Caller ID service area.

The ID Withheld message means the caller has intentionally blocked transmission of information.

You can print a list of the Caller ID information received by your machine. (See How to print a report in chapter 6 of the Advanced User’s Guide.)

NoteThe Caller ID service varies with different carriers. Call your local telephone company to find out about the kind of service available in your area.

Telephone and external devices 6

Chapter 6

42

Setting the Caller ID to On 6

If you have Caller ID on your line, then this function should be set to On to display the caller's telephone number on the LCD as the telephone rings.

a Press Menu.


c Press a or b to choose Miscellaneous.Press OK.

d Press a or b to choose Caller ID.


f Press Stop/Exit.

Telephone services 6

Your machine supports the Caller ID subscriber telephone service that some telephone companies offer.

Features like Voice Mail, Call Waiting, Call Waiting/Caller ID, answering services, alarm systems or other custom features on one telephone line may create problems with the operation of your machine.

NoteCaller ID is available for U.K. and Ireland only.

Setting the Telephone Line Type 6

If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, it is also necessary to change the Telephone Line Type accordingly by completing the following steps.

a Press Menu.


c Press a or b to choose Phone Line Set.Press OK.

d Press a or b to choose PBX, ISDN (or Normal).Press OK.

e Do one of the following:

If you choose PBX, go to step f.

If you choose ISDN or Normal, go to step i.

f Press a or b to choose On or Always.Press OK.

Telephone and external devices

43

6

NoteIf you choose On, the machine dials a prefix number before the fax number you dial only when Tel/R is pressed. If you choose Always, the machine always automatically dials a prefix number before the fax number.

g Press a or b to choose Change.Press OK.

h Enter the prefix number on the dial pad.Press OK.

i Press Stop/Exit.

Note• If your telephone system requires a timed

break recall (TBR), press Tel/R to enter the break.

• You can use the numbers 0 to 9, #, l and !. (Press Tel/R to display !.) You cannot use ! with any other numbers or characters.

PBX and TRANSFER 6

The machine is initially set to Normal, which lets the machine connect to a standard PSTN (Public Switched Telephone Network) line. However, many offices use a central telephone system or Private Branch Exchange (PBX). Your machine can be connected to most types of PBX. The machine's recall feature supports timed break recall only (TBR). TBR will work with most PBX systems allowing you to gain access to an outside line, or transfer calls to another extension. The feature works when Tel/R is pressed.

NoteYou can program a Tel/R key press as part of a number stored in a One Touch Dial or Speed Dial location. When programming the One Touch Dial or Speed Dial number, press Tel/R first (the LCD shows “!”), then enter the telephone number. If you do this, you do not need to press Tel/R each time before you dial using a One Touch Dial or Speed Dial location. (See Storing numbers on page 52.) However, if PBX is not chosen in the Telephone Line Type setting, you cannot use the One Touch Dial or Speed Dial number that the Tel/R press is programmed into.

Chapter 6

44

Connecting an external TAD (telephone answering device) 6

You may choose to connect an external answering device. However, when you have an external TAD on the same telephone line as the machine, the TAD answers all calls and the machine “listens” for fax calling (CNG) tones. If it hears them, the machine takes over the call and receives the fax. If it does not hear CNG tones, the machine lets the TAD continue playing your outgoing message so your caller can leave you a voice message.

The TAD must answer within four rings (the recommended setting is two rings). The machine cannot hear CNG tones until the TAD has answered the call, and with four rings there are only 8 to 10 seconds of CNG tones left for the fax “handshake”. Make sure you carefully follow the instructions in this guide for recording your outgoing message. We do not recommend using the toll saver feature on your external answering machine if it exceeds five rings.

NoteIf you do not receive all your faxes, shorten the Ring Delay setting on your external TAD.

1 TAD

When the TAD answers a call, the LCD shows Telephone.

IMPORTANTDO NOT connect a TAD elsewhere on the same telephone line.

Connections settings 6

The external TAD must be connected as shown in the previous illustration.

a Set your external TAD to one or two rings. (The machine's Ring Delay setting does not apply.)

b Record the outgoing message on your external TAD.

c Set the TAD to answer calls.

d Set the Receive Mode to External TAD. (See Choose the Receive Mode on page 36.)

Recording an outgoing message (OGM) on an external TAD 6

Timing is important in recording this message.

a Record 5 seconds of silence at the beginning of your message. (This allows your machine time to listen for the fax CNG tones of automatic transmissions before they stop.)

b Limit your speaking to 20 seconds.

NoteWe recommend beginning your OGM with an initial 5-second silence because the machine cannot hear fax tones over a resonant or loud voice. You may try omitting this pause, but if your machine has trouble receiving, then you must re-record the OGM to include it.

1

1


45

6

Multi-line connections (PBX) 6

We suggest you ask the company who installed your PBX to connect your machine. If you have a multi line system we suggest you ask the installer to connect the unit to the last line on the system. This prevents the machine being activated each time the system receives telephone calls. If all incoming calls will be answered by a switchboard operator we recommend that you set the Receive Mode to Manual.

We cannot guarantee that your machine will operate correctly under all circumstances when connected to a PBX. Any difficulties with sending or receiving faxes should be reported first to the company who handles your PBX.

NoteMake sure the Telephone Line Type is set to PBX. (See Setting the Telephone Line Type on page 42.)

External and extension telephones 6

Connecting an external or extension telephone 6

You can connect a separate telephone to your machine as shown in the diagram below.

1 Extension telephone

2 External telephone

When you are using a telephone on the same phone line, the LCD shows Telephone.

NotePlease make sure you use an external telephone with a cable no more than 3 metres long.

1

2

Chapter 6

46

Operation from external and extension telephones 6

If you answer a fax call on an extension or an external telephone, you can make your machine take the call by using the Remote Activation Code. When you press the Remote Activation Code l 5 1, the machine starts to receive the fax.

If the machine answers a voice call and fast double-rings for you to take over, use the Remote Deactivation Code # 5 1 to take the call at an extension telephone. (See F/T Ring Time (Fax/Tel mode only) on page 38.)

If you answer a call and no one is on the line: 6

You should assume that you're receiving a manual fax.

Press l 5 1 and wait for the chirp or until the LCD shows Receiving, and then hang up.

NoteYou can also use the Fax Detect feature to make your machine automatically take the call. (See Fax Detect on page 39.)

Using extension telephones (U.K. only) 6

Your premises may already be wired with parallel extension telephones, or you may plan to add extension telephones to your line, as well as your machine. While the simplest arrangement is a straightforward parallel connection, there are some problems with this arrangement, the most obvious of which is inadvertent interruption of a facsimile transmission caused by someone picking up an extension telephone to make an outgoing call. Also, remote activation code may not operate reliably in such a simple configuration.

This machine may also be set to make a delayed transmission (i.e. a transmission at a pre-set time). This pre-set job may coincide with someone picking up an extension handset.

These problems can easily be eliminated, if you arrange modification of your extension wiring circuit, such that extension devices are connected “downstream” of your machine in a master/slave configuration (see fig. 2). In this configuration the machine can always detect whether a telephone is in use. Thus it will not attempt to seize the line during that time. This is known as “telephone off-hook detection.”

The inadvisable configuration is shown in figure 1, and the recommended master/slave configuration is shown in figure 2.

This new connection configuration can be arranged by contacting BT, Kingston upon Hull Telecommunications, your PBX maintainer or a qualified telephone installation company as appropriate. Simply explained, the extension telephone circuit should be terminated on a normal modular plug (BT 431A style), which in turn should be put into the modular socket of the white “T”-shaped connector provided as part of the line cord assembly.


47

6

Inadvisable connection of extension sockets (Fig. 1.) 6

1 Extension socket

2 Master socket

3 Incoming line

Recommended connection of extension sockets (Fig. 2.) 6

1 Extension socket

2 Master socket

3 Incoming line

The fax machine must be plugged into the master socket.

NoteThese telephones are now connected as external devices (see Connecting an external or extension telephone on page 45), because they are connected to the fax machine via the T-connector.

Using a cordless external telephone 6

Once the base unit of the cordless telephone has been connected to the same telephone line as the machine (see External and extension telephones on page 45), it is easier to answer calls during the Ring Delay if you carry the cordless handset around with you.

If you let the machine answer first, you will have to go to the machine so you can press Tel/R to send the call to the cordless handset.

Using remote codes 6

Remote Activation code 6

If you answer a fax call on an extension or external telephone, you can tell your machine to receive it by dialling the Remote Activation Code l 5 1. Wait for the chirping sounds then replace the handset. (See Fax Detect on page 39.)

If you answer a fax call at the external telephone, you can make the machine receive the fax by pressing Mono Start and choose Receive.

Remote Deactivation Code 6

If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T Ring (fast double-ring), after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T Ring off by pressing # 5 1 (make sure you press this between the rings).

If the machine answers a voice call and fast double-rings for you to take over, you can take the call at the external telephone by pressing Tel/R.

FAX

1 123

FAX

1 1 2 3

Chapter 6

48

Changing the remote codes 6

If you want to use Remote Activation, you have to turn on the remote codes. The preset Remote Activation Code is l 5 1. The preset Remote Deactivation Code is # 5 1. If you want to, you can replace them with your own codes.

a Press Menu.



d Press a or b to choose Remote Codes.


f Enter the new Remote Activation Code.Press OK.

g Press a or b to choose Deact.Code: and enter the new Remote Deactivation Code.Press OK.

h Press Stop/Exit.

Note• If you are always disconnected when

accessing your external TAD remotely, try changing the Remote Activation Code and Remote Deactivation Code to another three-digit code using the numbers 0-9, l, #.

• Remote Codes might not work with some telephone systems.

49

7

7

How to dial 7

Manual dialling 7

Press all of the digits of the fax or telephone number.

One Touch Dialling 7

Your machine has 8 One Touch keys where you can store 16 fax or telephone numbers for automatic dialling.

Press the One Touch key that stores the number you want to call. (See Storing One Touch Dial numbers on page 52.) To access numbers 9 to 16, hold down Shift as you press the One Touch key.

Speed Dialling 7

a Press (Phone Book).

You can also choose Phone Book by

pressing (FAX).

b Press a or b to choose Search.Press OK.


Press a or b to choose Alphabetic Order or Numeric Order. Press OK.

If you have two numbers in the location, press a or b to choose the number you want to call. Press OK.

Enter the 2-digit Speed Dial number using the dial pad. (See Storing Speed Dial numbers on page 53.)

NoteIf the LCD shows Not Registered when you enter or search a Speed Dial number that has not been stored at this location.

Dialling and storing numbers 7

Chapter 7

50

Search 7

You can search for names you have stored in the One Touch and Speed Dial memory.


You can also choose Phone Book by

pressing (FAX).

b Press a or b to choose Search.Press OK.

c Press a or b to choose Alphabetic Order or Numeric Order.Press OK.

Note• Press l to make the LCD font size larger.

• Press # to make the LCD font size smaller.

d If you chose Alphabetic Order in step c, use the dial pad to enter the first letter of the name, and then press a or b to choose the name and number you want to call.Press OK.

Fax Redial 7

If you are sending a fax manually and the line is busy, press Redial/Pause, and then press Mono Start or Colour Start to try again. If you want to make a second call to a number you recently dialled, you can press Redial/Pause and choose one of the last 30 numbers from the Outgoing Call List.

Redial/Pause only works if you dialled from the control panel. If you are sending a fax automatically and the line is busy, the machine will automatically redial up to three times at five minute intervals.

a Press Redial/Pause.

b Press a or b to choose the number you want to redial.Press OK.

c Press a or b to choose Send a fax.Press OK.

d Press Mono Start or Colour Start.

NoteIn Real Time Transmission the automatic redial feature does not work when using the scanner glass.

Dialling and storing numbers

51

7

Additional Dialling Operations 7

Outgoing Call history 7

The last 30 numbers you sent a fax to will be stored in the outgoing call history. You can choose one of these numbers to fax to, add to One Touch or Speed Dial, or delete from the history.

a Press Redial/Pause.You can also choose Outgoing Call

by pressing (FAX).

b Press a or b to choose the number you want.Press OK.


To send a fax, press a or b to choose Send a fax.

Press OK.

Press Mono Start or Colour Start.

If you want to store the number, press a or b to choose Add To Phone Book.

Press OK.

(See Storing One Touch numbers from Outgoing Calls or Storing Speed Dial numbers from Outgoing Calls in chapter 5 of the Advanced User’s Guide.)

Press a or b to choose Delete.

Press OK.

Press 1 to confirm.

d Press Stop/Exit.

Caller ID history 7

This feature requires the Caller ID subscriber service offered by many local telephone companies. (See Caller ID (U.K. and Ireland only) on page 41.)

The numbers, or names if available, from the last 30 faxes and telephone calls you received will be stored in the Caller ID history. You can view the list or choose one of these numbers to fax to, add to One Touch or Speed Dial, or delete from the history. When the thirty-first call comes into the machine, it replaces information about the first call.

NoteIf you are not a Caller ID subscriber, you can still view call dates from the Caller ID history, and delete entries from the list.

a Press Redial/Pause and press l.You can also choose Caller ID hist. by pressing

(FAX).

b Press a or b to choose the number you want.Press OK.


To send a fax, press a or b to choose Send a fax.Press OK.Press Mono Start or Colour Start.

If you want to store the number, press a or b to choose Add To Phone Book.Press OK.(See Storing One Touch numbers from the Caller ID history or Storing Speed Dial numbers from the Caller ID history in chapter 5 of the Advanced User’s Guide.)

If you want to delete the number, press a or b to choose Delete.Press OK.Press 1 to confirm.

Chapter 7

52

d Press Stop/Exit.

NoteYou can print the Caller ID list.(See How to print a report in chapter 6 of the Advanced User’s Guide.)

Storing numbers 7

You can set up your machine to do the following types of easy dialling: One Touch, Speed Dial and Groups for broadcasting faxes. When you dial a Quick Dial number, the LCD shows the number.

NoteIf you lose electrical power, the Quick Dial numbers that are in the memory will not be lost.

Storing a pause 7

Press Redial/Pause to put a 3.5-second pause between numbers. If you are dialling overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

Storing One Touch Dial numbers 7

Your machine has 8 One Touch keys where you can store 16 fax or telephone numbers for automatic dialling. To access numbers 9 to 16 hold down Shift as you press the One Touch key.

a Press the One Touch key where you want to store the number.Press 1 to choose Yes.

NoteYou can also store one Touch Dial

numbers pressing (Phone Book).

Press a or b to choose Set One Touch. Press OK.

Press a or b to choose the location where you want to store the number. Press OK.

Dialling and storing numbers

53

7

b Do one of the following:

Enter the name (up to 16 characters) using the dial pad.

Press OK.

(To help you enter letters, see Entering Text on page 124.)

To store the number without a name, press OK.

c Enter the fax or telephone number (up to 20 digits).Press OK.

NoteIf you downloaded Internet Fax:

If you want to store an E-mail address to use with Internet fax or Scan to E-mail server, press a to choose Dial Type, and then press d or c to change the option to E-Address. Press b to choose FAX/TEL/MAIL and then enter the E-mail address. (See Entering Text on page 124.)


e Press Stop/Exit.

Storing Speed Dial numbers 7

Names and numbers can be stored as two-digit Speed Dial locations. You can store up to 100 different Speed Dial locations. When you dial you will only have to press a

few keys (for example: (Phone Book), Search, OK, the two-digit number, and Mono Start or Colour Start).


b Press a or b to choose Set Speed Dial.Press OK.

c Press a or b to choose the Speed Dial location where you want to store the number.Press OK.

d Do one of the following:

Enter the name (up to 16 characters) using the dial pad.

Press OK.

(To help you enter letters, see Entering Text on page 124.)

To store the number without a name, press OK.

e Enter the fax or telephone number (up to 20 digits).Press OK.

f Do one of the following:

Enter the second fax or telephone number (up to 20 digits).

Press OK.

If you do not want to store a second number, press OK.

g Press a or b to choose Complete. Press OK.

h Do one of the following:

To store another Speed Dial number, go to step c.

If you are finished storing numbers, press Stop/Exit.

Chapter 7

54

Changing One Touch or Speed Dial names or numbers 7

You can change a One Touch or Speed Dial name or number that has already been stored.


b Press a or b to choose Set One Touch or Set Speed Dial.Press OK.

c Press a or b to choose the 2-digit One Touch or Speed Dial location you want to change.Press OK.


Press a or b to choose Change. Press OK.

Press a or b to choose Delete. Press OK. Press 1 to confirm. Go to step h.

NoteHow to change the stored name or number:

If you want to change a character, press d or c to position the cursor under the character you want to change, and then press Clear. Re-enter the character.

e If you want to change the name, press a or b to choose Name, then press c and enter the new name using the dial pad (up to 16 characters).Press OK.(See Entering Text on page 124.)

f If you want to change a Fax/Tel number, do one of the following:

If you want to change the first Fax/Tel number, press a or b to choose Fax/Tel: (One Touch Dial) or Fax/Tel1: (Speed Dial), then press c and enter the new fax or telephone number using the dial pad (up to 20 digits). Press OK.

If you want to change the second Fax/Tel number, press a or b to choose Fax/Tel2: (Speed Dial), then press c and enter the new fax or telephone number using the dial pad (up to 20 digits). Press OK.

If you want to change both numbers in this Speed Dial location, repeat this step and choose the other number.

g Press a or b to choose Complete.Press OK.

h Press Stop/Exit.

55

8

8

How to copy 8

The following steps show the basic copy operation. For details about each option, see the Advanced User’s Guide.

a Make sure you are in copy mode, press

(COPY) to illuminate it in blue.

The LCD shows:

1 No. of Copies

You can enter the number of copies you want by using the dial pad.

NoteThe default setting is Fax mode. You can change the amount of time that the machine stays in Copy mode after the last copy operation. (See Mode Timer in chapter 1 of the Advanced User’s Guide.)

b Do one of the following to load your document:

Place the document face up in the ADF.

(See Using the ADF on page 29.)

Place the document face down on the scanner glass.

(See Using the scanner glass on page 30.)

c If you want more than one copy, enter the number (up to 99).

d Press Mono Start or Colour Start.

Stop copying 8

To stop copying, press Stop/Exit.

Copy settings 8

You can change the following copy settings. Press COPY and then press a or b to scroll through the copy settings. When the setting you want is highlighted, then press d or c to choose your option, and press OK.

(Basic User's Guide)

For details about changing the following copy settings, see page 56.

Paper Type

Paper Size

Tray Select (MFC-J6710DW)

(Advanced User’s Guide)

For details about changing the following copy settings, see chapter 7:

Quality

Enlarge/Reduce

Page Layout

2 in 1 (ID)

Making copies 8

10101COPYCOPY

Quality Normal

Paper Size

Copy Press Start

Paper Type Plain PaperA4

Chapter 8

56

Stack/Sort

Density

Ink Save Mode

Thin Paper Copy

Skew Adjustment

Book Copy

Watermark Copy

Duplex Copy

Set New Default

Factory Reset

NoteIf you want to sort copies, use the ADF.

Paper Options 8

Paper Type 8

If you are copying on special paper, set the machine for the type of paper you are using to get the best print quality.

a Press (COPY).

b Load your document.

c Enter the number of copies you want.

d Press a or b to choose Paper Type.

e Press d or c to choose Plain Paper, Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Transparency.Press OK.

f If you do not want to change additional settings, press Mono Start or Colour Start.

Paper Size 8

If you are copying on paper other than A4 size, you will need to change the paper size setting. You can copy only on A4, A5, A3, Photo 10 15 cm, Letter, Legal or Ledger paper.

a Press (COPY).



d Press a or b to choose Paper Size.

e Press d or c to choose A4, A5, A3, 10x15cm, Letter, Legal or Ledger.Press OK.


Tray Select (MFC-J6710DW only) 8

You can change the tray temporarily for the next copy. To change the default tray setting see Tray use in Copy mode (MFC-J6710DW only) on page 23.

a Press (COPY).



d Press a or b to choose Tray Select.

e Press d or c to choose Tray#1, Tray#2 or Auto Select.Press OK.


NotePoster copy is not available when you use Tray #2.

57

9

9

PhotoCapture Center™ operations 9

Even if your machine is not connected to your computer, you can print photos directly from digital camera media or a USB Flash memory drive. (See Print Images on page 60.)

You can scan documents and save them directly to a memory card or USB Flash memory drive. (See How to scan to a memory card or USB Flash memory drive on page 61.)

If your machine is connected to a computer, you can access a memory card or USB Flash memory drive that is inserted in the front of the machine from your computer.

(See PhotoCapture Center™ for Windows® or

Remote Setup & PhotoCapture Center™ for Macintosh in the Software User’s Guide.)

Using a memory card or USB Flash memory drive 9

Your Brother machine has media drives (slots) for use with the following popular digital camera media: Memory Stick™, Memory Stick PRO™, Memory Stick Duo™, Memory Stick PRO Duo™, SD, SDHC, MultiMedia Card, MultiMedia Card plus and USB Flash memory drives.

The PhotoCapture Center™ feature lets you print digital photos from your digital camera at high resolution to get photo quality printing.

Printing photos from a memory card or USB Flash memory drive9

Chapter 9

58

Getting started 9

Firmly put a memory card or USB Flash memory drive into the correct slot.

1 USB Flash memory drive

IMPORTANTThe USB direct interface supports only a USB Flash memory drive, a PictBridge compatible camera, or a digital camera that uses the USB mass storage standard. Any other USB devices are not supported.

2 Memory card slot

Slot Compatible memory cards

Upper slot

Memory Stick™

Memory Stick PRO™

Memory Stick Duo™

Memory Stick PRO Duo™

Memory Stick Micro™ (Adapter required)

Lower slot

SD

SDHC

MultiMedia Card

MultiMedia Card plus

mini SD (Adapter required)

micro SD (Adapter required)

mini SDHC (Adapter required)

micro SDHC (Adapter required)

MultiMedia Card mobile (Adapter required)

21

Printing photos from a memory card or USB Flash memory drive

59

9

IMPORTANTDO NOT insert a Memory Stick Duo™ into the lower SD slot, this may cause damage to the machine.

PHOTO CAPTURE key indications:

PHOTO CAPTURE light is on, the memory card or USB Flash memory drive is correctly inserted.

PHOTO CAPTURE light is off, the memory card or USB Flash memory drive is not correctly inserted.

PHOTO CAPTURE light is blinking, the memory card or USB Flash memory drive is being read or written to.

IMPORTANTDO NOT unplug the power cord or remove the memory card or USB Flash memory drive from the media drive (slot) or USB direct interface while the machine is reading or writing to the memory card or USB Flash memory drive (the PHOTO CAPTURE key is blinking). You will lose your data or damage the card.

The machine can only read one device at a time.

Chapter 9

60

Print Images 9

View Photos 9

You can preview your photos on the LCD before you print them. If your photos are large files there may be a delay before each photo is displayed on the LCD.

a Make sure you have put the memory card or USB Flash memory drive in the correct slot.

Press (PHOTO CAPTURE).

b Press a or b to choose View Photo(s).Press OK.

c Press d or c to choose your photo.

d Enter the number of copies you want using the dial pad.

e Repeat step c and step d until you have chosen all the photos.

NotePress Clear to go back to the previous level.

f After you have chosen all the photos, do one of the following:

Press OK and change the print settings. (See PhotoCapture Center™ print settings on page 60.)

If you do not want to change any settings, press Colour Start to print.

PhotoCapture Center™ print settings 9

You can change the print settings temporarily.

The machine returns to its default settings after 3 minutes, or if the Mode Timer returns the machine to Fax mode. (See Mode Timer in chapter 1 of the Advanced User’s Guide.)

NoteYou can save the print settings you use most often by setting them as the default. (See Setting your changes as a new default in chapter 8 of the Advanced User’s Guide.)

1 No. of prints

(For View Photo(s), Search by Date, Slide Show)

You can see the total number of photos that will be printed.

(For Print All Photos, Print Photos, Enhance Photos, Trimming)

You can see the number of copies of each photo that will be printed.

(For DPOF printing) This does not appear.

0001Print Press Start

Print Quality PhotoPaper Type Other Glossy

10x15cmPaper Size

Print SettingPrint Setting1

Printing photos from a memory card or USB Flash memory drive

61

9

How to scan to a memory card or USB Flash memory drive 9

You can scan monochrome and colour documents onto a memory card or USB Flash memory drive. Monochrome documents will be stored in PDF (*.PDF) or TIFF (*.TIF) file formats. Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is Color 200 and the default file format is PDF. The machine automatically creates file names based on the current date. (For details, see the Quick Setup Guide.) For example, the fifth image scanned on July 1, 2011 would be named 01071105.PDF. You can change the colour and quality.

a Make sure you have put the memory card or USB Flash memory drive in the correct slot.

IMPORTANTDO NOT take out the memory card or USB Flash memory drive while PHOTO CAPTURE is blinking to avoid damaging the card, USB Flash memory drive or data stored on them.


c When you want to scan to a memory

card or USB Flash memory drive, press

(SCAN).

d Press a or b to choose Scan to Media.

Press OK.

e Do one of the following:

To change the quality, press a or b to choose Quality.

Go to step f.

Press Mono Start or Colour Start to start scanning without changing additional settings.

f Press d or c to choose Color 100, Color 200, Color 300, Color 600, B/W 100, B/W 200 or B/W 300.Press OK.

g Do one of the following:

To change the file type, go to step h.


h Press a or b to choose File Type.Press d or c to choose JPEG, PDF or TIFF.Press OK.

Note• If you chose a Color resolution in step f,

you cannot choose TIFF.

• If you chose a B/W resolution in step f, you cannot choose JPEG.

Quality Selectable File Format

Color 100 JPEG / PDF




B/W 100 TIFF / PDF

B/W 200 TIFF / PDF

B/W 300 TIFF / PDF

SCANSCAN Select & Press

Scan to FileScan to MediaScan to NetworkScan to FTP

OK

OK

Scan a document directly to a media card or USB flash memory.

Chapter 9

62

i Do one of the following:

To change the file name, go to step j.


NoteIf you are using the scanner glass of the machine you can change the glass scan size. Press a or b to choose Glass ScanSize and d or c to choose A4, A3, Letter, Legal or Ledger.

j The file name is assigned automatically; however, you can enter a name of your choice using the dial pad. Press a or b to choose File Name.Enter the new name. (See Entering Text on page 124.)You can only change the first 6 characters.Press OK.

NotePress Clear to delete the current name.

k Press Mono Start or Colour Start.

NoteYou can place multiple documents on the scanner glass and scan them as separate files. (See Auto Crop in chapter 8 of the Advanced User’s Guide.)

63

10

10

Printing a document 10

The machine can receive data from your computer and print it. To print from a computer, install the printer driver.

(See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide for details about the print settings.)

a Install the Brother printer driver on the Installation CD-ROM. (See the Quick Setup Guide.)

b From your application, choose the Print command.

c Choose the name of your machine in the Print dialog box and click Properties.

d Choose the settings you want in the Properties dialog box.

Media Type

Print Quality

Paper Size

Orientation

Colour/Greyscale

Ink Save Mode

Scaling

e Click OK.

f Click OK to begin printing.

How to print from a computer 10

64

11Scanning a document 11

There are several ways to scan documents. You can use the SCAN key on the machine or the scanner drivers on your computer.

a To use the machine as a scanner, install a scanner driver. If the machine is on a Network, configure it with a TCP/IP address.

Install the scanner drivers on the Installation CD-ROM. (See the Quick Setup Guide and Scanning in the Software User’s Guide.)

Configure the machine with a TCP/IP address if network scanning does not work. (See Configuring Network Scanning in the Software User’s Guide.)

b Load your document. (See How to load documents on page 29.)

Use the ADF to scan multiple pages of documents. It feeds each sheet automatically.

Use the scanner glass to scan a page of a book or one sheet at a time.


To scan using the SCAN key, go to Scanning using the scan key.

To scan using a scanner driver at your computer, go to Scanning using a scanner driver.

Scanning using the scan key 11

For more information, see Using the Scan key in the Software User’s Guide.

a Press (SCAN).

b Choose the scan mode you want.

Scan to File

Scan to Media

Scan to Network

Scan to FTP

Scan to E-mail

Scan to OCR 1

Scan to Image

1 (Macintosh users)Presto! PageManager must be downloaded and installed before use. See Accessing Brother Support (Macintosh) on page 3 for further instructions.

c (For network users)Choose the computer you want to send the data to.

d Press Start to begin scanning.

How to scan to a computer 11

How to scan to a computer

65

11

Scanning using a scanner driver 11

For more information, see Scanning a document using the TWAIN driver or Scanning a document using the WIA driver in the Software User’s Guide.

a Start a scanning application and click the Scan button.

b Adjust the settings such as Resolution, Brightness and Scan Type in the Scanner Setup dialog box.

c Click Start or Scan to begin scanning.

66

AReplacing the ink cartridges A

Your machine is equipped with an ink dot counter. The ink dot counter automatically monitors the level of ink in each of the four cartridges. When the machine detects an ink cartridge is running out of ink, the machine will tell you with a message on the LCD.

The LCD will tell you which ink cartridge is low or needs replacing. Be sure to follow the LCD prompts to replace the ink cartridges in the correct order.

Even though the machine tells you to replace an ink cartridge, there will be a small amount of ink left in the ink cartridge. It is necessary to keep some ink in the ink cartridge to prevent air from drying out and damaging the print head assembly.

IMPORTANTBrother multifunction machines are designed to work with ink of a particular specification and will work to a level of optimum performance and reliability when used with Brother Original ink cartridges. Brother cannot guarantee this optimum performance and reliability if ink or ink cartridges of other specifications are used. Brother does not therefore recommend the use of cartridges other than Brother Original cartridges or the refilling of used cartridges with ink from other sources. If damage is caused to the print head or other parts of this machine as a result of using incompatible products with this machine, any repairs required as a result may not be covered by the warranty.

a Open the ink cartridge cover.If one or more of the ink cartridges have reached the end of their life, the LCD shows B&W Print Only or Cannot Print.

b Press the lock release lever as shown to release the cartridge indicated on the LCD. Remove the cartridge from the machine.

c Open the new ink cartridge bag for the colour shown on the LCD, and then take out the ink cartridge.

Routine maintenance A

Routine maintenance

67

A

d Turn the green release lever on the orange protective packing (1) clockwise until it clicks to release the vacuum seal. Then remove the orange protective packing as shown.

e Each colour has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.

f Gently push the back of the ink cartridge marked “PUSH” until it clicks, and then close the ink cartridge cover.

g The machine will automatically reset the ink dot counter.

Note• If you replaced an ink cartridge, for

example Black, the LCD may ask you to verify that it was a brand new one (for example, Did You Change Black). For each new cartridge you installed, press 1 (Yes) to automatically reset the ink dot counter for that colour. If the ink cartridge you installed is not a brand new one, be sure to press 2 (No).

• If the LCD shows No Ink Cartridge or Cannot Detect after you install the ink cartridges, check that the ink cartridges are installed correctly.

CAUTION

If ink gets in your eyes, wash it out with water at once and call a doctor if you are concerned.

1

1

68

IMPORTANT• DO NOT take out ink cartridges if you do

not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge.

• DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin.

• If ink gets on your skin or clothing immediately wash it off with soap or detergent.

• If you mix the colours by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation.

• Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package.

• DO NOT dismantle or tamper with the ink cartridge, this can cause the ink to leak out of the cartridge.

Cleaning and checking the machine A

Cleaning the scanner glass A

a Unplug the machine from the electrical socket.

b Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with a non-flammable glass cleaner.

c In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-flammable glass cleaner.

d Re-connect the power cord.

2

1

3

1

2

Routine maintenance

69

A

NoteIn addition to cleaning the glass strip with a non-flammable glass cleaner, run your finger tip over the glass strip to see if you can feel anything on it. If you feel dirt or debris, clean the glass strip again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt.

Cleaning the print head A

To maintain good print quality, the machine will automatically clean the print head when needed. You can start the cleaning process manually if there is a print quality problem.

Clean the print head and ink cartridges if you get a horizontal line in the text or graphics, or blank text on your printed pages. You can clean Black only, three colours at a time (Yellow/Cyan/Magenta), or all four colours at once.

Cleaning the print head consumes ink. Cleaning too often uses ink unnecessarily.

IMPORTANTDO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.

a Press Menu.

b Press a or b to choose Ink Management.Press OK.

c Press a or b to choose Cleaning.Press OK.

d Press a or b to choose Black, Color or All.Press OK.The machine cleans the print head. When cleaning is finished, the machine will go back to the standby mode automatically.

NoteIf you clean the print head at least five times and the print has not improved, try installing a new Brother Original Innobella™ ink cartridge for each problem colour. Try cleaning the print head again up to five more times. If the print has not improved call your Brother dealer.

i

When there is a spot of dirt or correction fluid on the glass strip the printed sample shows a vertical line.

After the glass strip is cleaned the vertical line is gone.

70

Checking the print quality A

If faded or streaked colours and text appear on your output, some of the nozzles may be clogged. You can check this by printing the Print Quality Check Sheet and looking at the nozzle check pattern.

a Press Menu.


c Press a or b to choose Test Print.Press OK.

d Press a or b to choose Print Quality.Press OK.

e Press Colour Start.The machine begins printing the Print Quality Check Sheet.

f Check the quality of the four colour blocks on the sheet.

g The LCD asks you if the print quality is OK.Do one of the following:

If all lines are clear and visible, press 1 (Yes) to finish the Print Quality check and go to step k.

If you can see missing short lines as shown below, press 2 to choose No.

h The LCD asks you if the print quality is OK for black and the three colours.Press 1 (Yes) or 2 (No).

i The LCD asks you if you want to start cleaning.Press 1 (Yes).The machine starts cleaning the print head.

j After cleaning is finished, press Colour Start.The machine starts printing the Print Quality Check Sheet again. Return to step f.

k Press Stop/Exit.If you repeat this procedure at least five times and the print quality is still poor, replace the ink cartridge for the clogged colour.After replacing the ink cartridge, check the print quality. If the problem still exists, repeat the cleaning and test print procedures at least five times for the new ink cartridge. If ink is still missing, call your Brother dealer.

IMPORTANTDO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.

Note

OK Poor

i

When a print head nozzle is clogged the printed sample looks like this.

After the print head nozzle is cleaned, the horizontal lines are gone.

Routine maintenance

71

A

Checking the print alignment A

You may need to adjust the print alignment after transporting the machine, if your printed text becomes blurred or images become faded.

a Press Menu.


c Press a or b to choose Test Print.Press OK.

d Press a or b to choose Alignment.Press OK.

e Press Mono Start or Colour Start.The machine starts printing the Alignment Check Sheet.

f For the “A” pattern, press the number of the test print that has the least visible vertical stripes (1-9).

g For the “B” pattern, press the number of the test print that has the least visible vertical stripes (1-9).

h For the “C” pattern, press the number of the test print that has the least visible vertical stripes (1-9).

i For the “D” pattern, press the number of the test print that has the least visible vertical stripes (1-9).

j Press Stop/Exit.

72

BError and Maintenance messages B

As with any sophisticated office product, errors may occur and consumable items may need to be replaced. If this happens, your machine identifies the error and shows an error message. The most common error and maintenance messages are shown below.

You can correct most errors and routine maintenance by yourself. If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips.

Visit us at http://solutions.brother.com/.

Troubleshooting B

Error Message Cause Action

B&W Print Only

Replace Ink

One or more of the colour ink cartridges have reached the end of their life.

You can use the machine in monochrome mode for approximately four weeks depending on the number of pages you print.

While this message appears on the LCD, each operation works in the following way:

Printing

If you click Greyscale in the Advanced tab of the printer driver you can use the machine as a monochrome printer.

Copying

If the paper type is set to Plain Paper you can make copies in monochrome.

Duplex copy is not available when this message appears.

Faxing

If the paper type is set to Plain Paper or Inkjet Paper, the machine will receive and print the faxes in monochrome.

If a sending machine has a colour fax, the machine’s “handshake” will ask that the fax be sent as monochrome.

If the paper type is set to Other Glossy, Brother BP71 or Brother BP61 the machine will stop all print operations.

Replace the ink cartridges. (See Replacing the ink cartridges on page 66.)

If you unplug the machine, or take out the ink cartridge, you cannot use the machine until you change to a new ink cartridge.


Troubleshooting

73

B

BT Call Sign On

(U.K. only)

BT Call Sign is set to ON. You cannot change the Receive Mode from Manual to another mode.

Set BT Call Sign to OFF. (See BT Call Sign (U.K. only) in chapter 5 of the Advanced User’s Guide.)

Cannot Detect You installed a new ink cartridge too quickly and the machine did not detect it.

Take out the new ink cartridge and re-install it slowly until it clicks.

If you are using non Brother Original ink the machine may not detect the ink cartridge.

Replace the cartridge with a Brother Original ink cartridge. If the error message remains, contact your Brother dealer.

An ink cartridge is not installed correctly.

Take out the new ink cartridge and re-install it slowly until it clicks. (See Replacing the ink cartridges on page 66.)

Cannot Print

Replace Ink

One or more of the ink cartridges have reached the end of their life. The machine will stop all print operations. While memory is available, monochrome faxes will be stored in the memory. If a sending machine has a colour fax, the machine's “handshake” will ask that the fax be sent as monochrome.

Replace the ink cartridges. (See Replacing the ink cartridges on page 66.)

Comm.Error Poor telephone line quality caused a communication error.

If the problem continues, call the telephone company and ask them to check your telephone line.

Connection Fail You tried to poll a fax machine that is not in Polled Waiting mode.

Check the other fax machine's polling setup.

Cover is Open The scanner cover is not completely closed.

Lift the scanner cover and then close it again.

The ADF cover is not completely closed.

Open the ADF cover and then close it again.

The ink cartridge cover is not completely closed.

Firmly close the ink cartridge cover until it clicks.

Data Remaining Print data is left in the machine's memory.

Press Stop/Exit. The machine will cancel the job and clear it from the memory. Try to print again.

Disconnected The other person or other person's fax machine stopped the call.

Try to send or receive again. If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP). (See Telephone line interference / VoIP on page 95.)

Document Jam The document was not inserted or fed correctly, or the document scanned from the ADF was too long.

(See Using the ADF on page 29.)

(See Document jam on page 80.)

High Temperature The print head is too warm. Allow the machine to cool down.


74

Hub is Unusable. A Hub or USB Flash memory drive with Hub has been connected to the USB direct interface.

A Hub or USB Flash memory drive with Hub are not supported. Unplug the device from the USB direct interface.

Image Too Long. The proportions of your photo are irregular so effects could not be added.

Choose a regularly proportioned image.

Image Too Small. The size of your photo is too small to trim.

Choose a larger image.

Ink Absorber Full Internal servicing required. This problem may be caused by the use of cartridges other than Brother Original cartridges or the refilling of empty cartridges with ink from other sources. If damage is caused to the print head or other parts of this machine as a result of using other brands of ink or ink cartridges, any repairs required as a result may not be covered by the warranty.

Call Brother Customer Service / your Brother dealer.

Ink Absorber NearFull The ink absorber box or flushing box is near full.

Call Brother Customer Service / your Brother dealer.

Ink low One or more of the ink cartridges are near the end of their life. If a sending machine has a colour fax to send, your machine’s “handshake” will ask that the fax be sent as monochrome. If the sending machine has the ability to convert it, the colour fax will be printed at your machine as a monochrome fax.

Order a new ink cartridge. You can continue printing until the LCD shows Cannot Print. (See Replacing the ink cartridges on page 66.)

Low Temperature The print head is too cold. Allow the machine to warm up.

Media Error The memory card is either corrupted, incorrectly formatted, or there is a problem with the memory card.

Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive (slot) of the machine by putting in another memory card that you know is working.

Media is Full. The memory card or USB Flash memory drive you are using has no available space or already contains 999 files.

Your machine can only save to your memory card or USB Flash memory drive if it contains less than 999 files. Try deleting unused files to free some space and try again.

No Caller ID There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company.

If you want to use the Caller ID feature call your telephone company. (See Caller ID (U.K. and Ireland only) on page 41.)

No File The memory card or USB Flash memory drive in the media drive does not contain a .JPG file.

Put the correct memory card or USB Flash memory drive into the slot again.


Troubleshooting

75

B

No Ink Cartridge An ink cartridge is not installed correctly.

Take out the new ink cartridge and re-install it slowly until it clicks. (See Replacing the ink cartridges on page 66.)

No Paper Fed The machine is out of paper or paper is not correctly loaded in the paper tray.


Refill the paper in the paper tray, and then press Mono Start or Colour Start.

Remove the paper and load it again and then press Mono Start or Colour Start. (See Loading paper and other print media on page 10.)

The paper is jammed in the machine. Remove the jammed paper by following the steps in Printer jam or paper jam on page 81.

If you see this error often when making a duplex copy or duplex print, the paper feed rollers may be stained with ink. Clean the paper feed rollers. (See Cleaning the paper feed rollers in appendix A of the Advanced User's Guide.)

Paper powder has accumulated on the surface of the paper pick-up rollers and the back sides of the paper feed rollers.

Clean the paper pick-up rollers and the back sides of the paper feed rollers. (See Cleaning the paper pick-up rollers in appendix A of the Advanced User's Guide.)

The Jam Clear Cover is not closed correctly.

Check the Jam Clear Cover is closed evenly at both ends. (See Printer jam or paper jam on page 81.)

The paper was not inserted in the centre position of the manual feed slot.

Remove the paper and re-insert it in the centre of the manual feed slot, and then press Mono Start or Colour Start. (See Loading paper in the manual feed slot on page 17.)

No Response/Busy The number you dialled does not answer or is busy.

Verify the number and try again.

Not Registered You tried to access a One Touch or Speed Dial number that is not programmed.

Set up the One Touch or Speed Dial number. (See Storing One Touch Dial numbers on page 52 and Storing Speed Dial numbers on page 53.)


76

Out of Memory The machine's memory is full. Copy operation in progress

Press Stop/Exit and wait until the other operations in progress finish and then try again.

The memory card or USB Flash memory drive you are using does not have enough free space to scan the documents.

Delete unused files from your memory card or USB Flash memory drive to make some free space and then try again.

Out of Fax Memory The fax memory is full. Do one of the following:

Clear the data in the memory. To gain extra memory, you can turn off Memory Receive. (See Turning off Memory Receive operations in chapter 4 of the Advanced User’s Guide.)

Print the faxes that are in the memory. (See Printing a fax from the memory in chapter 4 of the Advanced User’s Guide.)

Paper Jam [Front] Paper is jammed in the machine. Remove the jammed paper by following the steps in Paper is jammed at the front of the machine on page 81.

Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper.

Paper Jam [Front,Rear] Paper is jammed in the machine. Remove the jammed paper by following the steps in Paper is jammed at the front and back of the machine on page 83.


More than one sheet of paper was placed in the manual feed slot.

—OR—

Another sheet of paper was placed in the manual feed slot before the LCD showed Put paper in Manual Feed SlotThen Press Start.

Do not put more than one sheet of paper in the manual feed slot at any one time. Wait until the LCD shows Put paper in Manual Feed SlotThen Press Start before you feed the next sheet of paper in the manual feed slot.

Remove the jammed paper by following the steps in Paper is jammed at the front and back of the machine on page 83.


Troubleshooting

77

B

Paper Jam [Rear] Paper is jammed in the machine. Remove the jammed paper by following the steps in Paper is jammed at the back of the machine on page 82.


Paper powder has accumulated on the surface of the paper pick-up rollers and the back sides of the paper feed rollers.

Clean the paper pick-up rollers and the back sides of the paper feed rollers. (See Cleaning the paper pick-up rollers in appendix A of the Advanced User's Guide.)

Unable to CleanXX

Unable to Init.XX

Unable to PrintXX

Unable to ScanXX

The machine has a mechanical problem.

—OR—

A foreign object such as a paper clip or ripped paper is in the machine.

Open the scanner cover and remove any foreign objects and paper scraps from inside the machine. If the error message continues, disconnect the machine from the power for several minutes and reconnect it.

(The machine can be turned off for approximately 24 hours without losing faxes stored in the memory. See Transferring your faxes or Fax Journal report on page 79.)

Unusable Device

Disconnect device fromfront connector & turnmachine off & then on

A broken device has been connected to the USB direct interface.

Unplug the device from the USB direct interface, then press On/Off to turn the machine off and then on again.

Unusable Device

Please DisconnectUSB Device.

A USB device or USB Flash memory drive that is not supported has been connected to the USB direct interface.

For more information, visit us at http://solutions.brother.com/.

Unplug the device from the USB direct interface. Turn the machine off and then on again.

Wrong Ink Color A colour ink cartridge has been installed in the Black ink cartridge position.

Check which ink cartridges are not matched by colour to their ink cartridge positions and move them to their correct positions.



78

Wrong Paper Size The Paper Size setting does not match the size of paper in the tray. Or, you did not set the paper guides in the tray to the indicators for the paper size you are using.

1 Check that the paper size you choose matches the size of paper in the tray.

2 Make sure you loaded the paper in a Portrait position, by setting the paper guides at the indicators for your paper size.

3 After you have checked the paper size and the paper position, press Mono Start or Colour Start to continue printing.

Wrong Tray Setting

(MFC-J6710DW)

The machine’s Paper Size and Tray Use settings do not match the size of paper in the tray you are using.

1 Press Tray Setting, and make sure the machine’s Paper Size and Tray Use settings match the size of paper in the tray you are using. (See Paper Size and Type (MFC-J6710DW) on page 23 and Tray use in Copy mode (MFC-J6710DW only) on page 23.)

2 After you have checked the paper size and tray use settings, press a or b to choose Restart Printing, and press OK to continue printing.


Troubleshooting

79

B

Error animations display B

Error animations display step-by-step instructions when paper gets jammed. You can read the steps at your own pace by pressing c to see the next step and d to go backward.

Transferring your faxes or Fax Journal report B

If the LCD shows:

Unable to CleanXX

Unable to Init.XX

Unable to PrintXX

Unable to ScanXX

We recommend transferring your faxes to another fax machine or to your PC. (See Transferring faxes to another fax machine on page 79 or Transferring faxes to your PC on page 79.)

You can also transfer the Fax Journal report to see if there are any faxes you need to transfer. (See Transferring the Fax Journal report to another fax machine on page 80.)

Transferring faxes to another fax machine B

If you have not set up your Station ID, you cannot enter fax transfer mode. (See Enter personal information (Station ID) in the Quick Setup Guide.)

a Press Stop/Exit to interrupt the error temporarily.

b Press Menu.

c Press a or b to choose Service.Press OK.

d Press a or b to choose Data Transfer.Press OK.

e Press a or b to choose Fax Transfer.Press OK.

f Do one of the following:

If the LCD shows No Data, there are no faxes left in the machine's memory.

Press Stop/Exit.

Enter the fax number to which faxes will be forwarded.

g Press Mono Start.

Transferring faxes to your PC B

You can transfer the faxes from your machine's memory to your PC.


b Make sure you have installed MFL-Pro Suite on your PC, and then turn on PC-FAX Receiving on the PC. (For details see PC-FAX receiving in the Software User’s Guide.)

c Make sure you have set PC-Fax Receive on the machine. (See PC-Fax Receive (Windows® only) in chapter 4 of the Advanced User’s Guide.)If faxes are in the machine’s memory when you set up PC-Fax Receive, the LCD will ask if you want to transfer the faxes to your PC.


To transfer all faxes to your PC, press 1. You will be asked if you want a backup print.

To exit and leave the faxes in the memory, press 2.

e Press Stop/Exit.

80

Transferring the Fax Journal report to another fax machine B

If you have not set up your Station ID, you cannot enter fax transfer mode. (See Enter personal information (Station ID) in the Quick Setup Guide.)


b Press Menu.

c Press a or b to choose Service.Press OK.

d Press a or b to choose Data Transfer.Press OK.

e Press a or b to choose Report Trans.Press OK.

f Enter the fax number to which the Fax Journal report will be forwarded.

g Press Mono Start.

Document jam B

Documents can jam in the ADF unit if they are not inserted or fed correctly, or if they are too long. Follow the steps below to clear a document jam.

Document is jammed in the top of the ADF unit B

a Take out any paper from the ADF that is not jammed.

b Open the ADF cover.

c Pull the jammed document out to the right.

d Close the ADF cover.

e Press Stop/Exit.

IMPORTANTTo avoid document jams close the ADF cover correctly by pushing it gently in the middle.

Troubleshooting

81

B

Document is jammed inside the ADF unit B

a Take out any paper from the ADF that is not jammed.

b Lift the document cover.

c Pull the jammed document out to the right.

d Close the document cover.

e Press Stop/Exit.

Removing small documents jammed in the ADF B

a Lift the document cover.

b Insert a piece of stiff paper, such as cardstock, into the ADF to push any small paper scraps through.

c Close the document cover.

d Press Stop/Exit.

Printer jam or paper jam B

Take out the jammed paper depending on where it is jammed in the machine.

Paper is jammed at the front of the machine B

If the LCD shows Paper Jam [Front], follow these steps:


b Pull the paper tray (1) completely out of the machine.

c Pull out the jammed paper (1).

1

1

82

d Lift the Jam Clear flap, and remove the jammed paper.

e Put the paper tray firmly back in the machine.

NoteMake sure you pull out the paper support until it clicks.

f Re-connect the power cord.

NoteIf there is a repeat paper jam, a small piece of paper may be stuck in the machine. (See Additional paper jam clear operations on page 86.)

Paper is jammed at the back of the machine B

If the LCD shows Paper Jam [Rear], follow these steps:


NoteMake sure you remove paper from the manual feed slot, and then close it.

b Open the Jam Clear Cover (1) at the back of the machine.

c Pull the jammed paper out of the machine.

1

Troubleshooting

83

B

d Close the Jam Clear Cover. Make sure the cover is closed correctly.

e Re-connect the power cord.

Paper is jammed at the front and back of the machine B

If the LCD shows Paper Jam [Front,Rear], follow these steps:


NoteMake sure you remove paper from the manual feed slot, and then close it.

b Pull paper tray #1 (1) and then tray #2 (2) (MFC-J6710DW) completely out of the machine.

c Pull out the jammed paper (1).

1

2

1

1

84

d Lift the flap, and remove the jammed paper.(With trays removed, go to step e.)

e Open the Jam Clear Cover (1) at the back of the machine.

f Pull the jammed paper out of the machine.

g Close the Jam Clear Cover. Make sure the cover is closed correctly.

h Put paper tray #1 (1) and then tray #2 (2) firmly back in the machine.

1

1

2

Troubleshooting

85

B

i Using both hands, use the finger holds on each side of the machine to lift the scanner cover (1) into the open position.Make sure that there is no jammed paper left in the corners of the machine.

IMPORTANT• If the paper is jammed under the print

head, unplug the machine from the power source, and then move the print head to take out the paper.

• If the print head is at the right corner as shown in the illustration, you cannot move the print head. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the middle. Then unplug the machine from the power source, and take out the paper.

• If ink gets onto your skin, immediately wash with soap and plenty of water.

j Gently close the scanner cover using the finger holds on each side.

CAUTION

Be careful not to trap your fingers under the scanner cover. Always use the finger holds provided on each side of the scanner cover when opening and closing it.

NoteMake sure you pull out the paper support until it clicks.

k Re-connect the power cord.

NoteIf there is a repeat paper jam, a small piece of paper may be stuck in the machine. (See Additional paper jam clear operations on page 86.)

1

86

Additional paper jam clear operationsB

a Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open position.

NoteIf the print head is at the right corner as shown in the illustration, hold down Stop/Exit until the print head moves to the middle.

b Unplug the machine from the electrical socket.

c Gently close the scanner cover using the finger holds on each side.

CAUTION

Be careful not to trap your fingers under the scanner cover. Always use the finger holds provided on each side of the scanner cover when opening and closing it.

d Open the manual feed slot cover.

e Put only one sheet of A4 or letter sized thick paper such as glossy paper in a Landscape position in the manual feed slot.Push it into the manual feed slot.

Note• We recommend you use glossy paper.

• If you don't push the paper deep into the manual feed slot, the machine will not feed it when you re-connect the power cord.

Troubleshooting

87

B

f Re-connect the power cord.The paper you placed in the manual feed slot will be fed through the machine and ejected.

g Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open position.Make sure that a piece of paper is not still jammed inside the machine.Gently close the scanner cover using the finger holds on each side.

88

Troubleshooting B

If you think there is a problem with your machine, check the chart below and follow the troubleshooting tips.

Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/.

If you are having difficulty with your machine B

Printing

Difficulty Suggestions

No printout. Check the interface cable or wireless connection on both the machine and your computer. (See the Quick Setup Guide.)

Check that the machine is plugged in and that the On/Off key is on.

One or more ink cartridges have reached the end of their life. (See Replacing the ink cartridges on page 66.)

Check to see if the LCD is showing an error message. (See Error and Maintenance messages on page 72.)

If the LCD shows Cannot Print and Replace Ink, see Replacing the ink cartridges on page 66.

Check that the correct printer driver has been installed and chosen.

Make sure that the machine is online. Click Start and then Printers and Faxes. Brother MFC-XXXXX (where XXXXX is your model name), and make sure that Use Printer Offline is unchecked.

Poor print quality. Check the print quality. (See Checking the print quality on page 70.)

Make sure that the Media Type setting in the printer driver or the Paper Type setting in the machine’s menu matches the type of paper you are using. (See

Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide and Paper Type on page 22.)

Make sure that your ink cartridges are fresh. The following may cause ink to clog:

The expiration date written on the cartridge package has passed. (Brother Original cartridges stay usable for up to two years if kept in their original packaging.)

The ink cartridge has been in your machine for over six months.

The ink cartridge may not have been stored correctly before use.

Make sure you are using Brother Original Innobella™ ink. Brother does not recommend the use of cartridges other than Brother Original cartridges or the refilling of used cartridges with ink from other sources.

Try using the recommended types of paper. (See Acceptable paper and other print media on page 25.)

The recommended environment for your machine is between 20 C to 33 C.

White horizontal lines appear in text or graphics.

Clean the print head. (See Cleaning the print head on page 69.)

Make sure you are using Brother Original Innobella™ ink.

Try using the recommended types of paper. (See Acceptable paper and other print media on page 25.)


Troubleshooting

89

B

The machine prints blank pages. Clean the print head. (See Cleaning the print head on page 69.)


Characters and lines are blurred. Check the printing alignment. (See Checking the print alignment on page 71.)

Printed text or images are skewed. Make sure the paper is loaded correctly in the paper tray and the paper side guides are adjusted correctly. (See Loading paper and other print media on page 10.)

Make sure the Jam Clear Cover is closed correctly.

Smudge or stain at the top centre of the printed page.

Make sure the paper is not too thick or curled. (See Acceptable paper and other print media on page 25.)

Printing appears dirty or ink seems to run.

Make sure you are using the recommended types of paper. (See Acceptable paper and other print media on page 25.) Don't handle the paper until the ink is dry.


If you are using photo paper, make sure that you have set the correct paper type. If you are printing a photo from your PC, set the Media Type in the Basic tab of the printer driver.

Stains appear on the reverse side or at the bottom of the page.

Make sure the printer platen is not dirty with ink. (See Cleaning the machine’s printer platen in appendix A of the Advanced User’s Guide.)


Make sure you are using the paper support flap. (See Loading paper and other print media on page 10.)

The machine prints dense lines on the page.

Check Reverse Order in the Basic tab of the printer driver.

The printouts are wrinkled. (Windows® users) In the printer driver Advanced tab, click Colour Settings, and uncheck Bi-Directional Printing.

(Macintosh users) In the printer driver, choose Print Settings, click Advanced, choose Other Print Options, and uncheck Bi-Directional Printing.


Cannot perform “Page Layout” printing.

Check that the paper size setting in the application and in the printer driver are the same.

Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data processing, sending and printing time. Try the other quality settings in the printer driver Advanced tab. Also, click Colour Settings, and make sure you uncheck Colour Enhancement.

Turn the borderless feature off. Borderless printing is slower than normal printing.

(See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide.)

Colour Enhancement is not working correctly.

If the image data is not full colour in your application (such as 256 colour), Colour Enhancement will not work. Use at least 24 bit colour data with the Colour Enhancement feature.

Photo paper does not feed correctly.

When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose.

Clean the paper pick-up rollers. (See Cleaning the paper pick-up rollers in appendix A of the Advanced User’s Guide.)

Printing (continued)


90

Machine feeds multiple pages. Make sure the paper is loaded correctly in the paper tray. (See Loading paper and other print media on page 10.)

Load only one size of paper and one type of paper in the paper tray at any one time.

Make sure the Base Pad in the paper tray is not dirty. (See Cleaning the paper pick-up rollers in appendix A of the Advanced User’s Guide.)

If there are only a few sheets of paper in the paper tray the machine may not pick them up correctly. Make sure there are at least 10 sheets of paper in the tray.

There is a paper jam. Make sure the paper length guide is set to the correct paper size. Do not extend the paper tray when you load A5 or smaller size paper. (See Printer jam or paper jam on page 81.)

Paper jam reoccurs. If there is a repeat paper jam, a small piece of paper may be stuck in the machine. Make sure paper is not still jammed in the machine. (See Additional paper jam clear operations on page 86.)

The paper jams when you use duplex copy or duplex print.

Use one of the jam prevention settings, DX1 or DX2. For copying, see Duplex (2-sided) copying in chapter 7 of the Advanced User’s Guide;

for printing see Duplex / Booklet for Windows® or Duplex Printing for Macintosh in the Software User's Guide.

If paper jams often when using duplex copy or duplex print, the paper feed rollers may be stained with ink. Clean the paper feed rollers. (See Cleaning the paper feed rollers in appendix A of the Advanced User's Guide.)

Printed pages are not stacked neatly.

Make sure you are using the paper support flap. (See Loading paper and other print media on page 10.)

Machine does not print from

Adobe® Illustrator®.Try to reduce the print resolution. (See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide.)

Printing Received Faxes


Condensed print and white streaks across the page or the top and bottom of sentences are cut off.

You probably had a bad connection, with static or interference on the telephone line. Ask the other party to send the fax again.

Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine.

Received colour fax prints only in black and white.

Replace the colour ink cartridges that have reached the end of their life, and then ask the other person to send the colour fax again. (See Replacing the ink cartridges on page 66.)

Left and Right margins are cut off or a single page is printed on two pages.

Turn on Auto Reduction. (See Printing a reduced incoming fax in chapter 4 of the Advanced User’s Guide.)

Printing (continued)


Troubleshooting

91

B

Telephone Line or Connections


Dialling does not work. (No dial tone)

Make sure the machine is plugged in and turned on.

Check the line cord connections.

Change the Tone/Pulse setting. (See the Quick Setup Guide.)

Lift the external telephone’s handset and listen for a dial tone. If there is no dial tone, ask your telephone company to check the line and/or socket.

The machine does not answer when called.

Make sure the machine is in the correct Receive Mode for your setup. (See Choose the Receive Mode on page 36.) Check for a dial tone. If possible, call your machine to hear it answer. If there is still no answer, check the telephone line cord connection. If there is no ringing when you call your machine, ask your telephone company to check the line.

Receiving Faxes


Cannot receive a fax. If you connect your machine to PBX or ISDN, set the menu setting of Telephone Line Type to your telephone type. (See Setting the Telephone Line Type on page 42.)

Sending Faxes


Cannot send a fax. Check all line cord connections.

Make sure that the FAX key is illuminated.

Ask the other party to check that the receiving machine has paper.

Print the Transmission Verification Report and check for an error. (See Reports in chapter 6 of the Advanced User’s Guide.)

Transmission Verification Report says ”RESULT:ERROR”.

There is probably temporary noise or static on the line. Try sending the fax again. If you send a PC FAX message and get “RESULT:ERROR” on the Transmission Verification Report, your machine may be out of memory. To gain extra memory, you can turn off Memory Receive (see Turning off Memory Receive operations in chapter 4 of the Advanced User’s Guide), print fax messages in memory (see Printing a fax from the memory in chapter 4 of the Advanced User’s Guide) or cancel a Delayed Fax or Polling Job. (see Cancelling a fax in progress on page 33 and Checking and cancelling waiting jobs in chapter 3 of the Advanced User’s Guide.) If the problem continues, ask the telephone company to check your telephone line.

If you often get transmission errors due to possible interference on the telephone line, try changing the menu setting of Compatibility to Basic(for VoIP). (See Telephone line interference / VoIP on page 95.)

If you connect your machine to PBX or ISDN, set the menu setting of Telephone Line Type to your telephone type. (See Setting the Telephone Line Type on page 42.)

Poor fax send quality. Try changing your resolution to Fine or S.Fine. Make a copy to check your machine's scanner operation. If the copy quality is not good, clean the scanner. (See Cleaning the scanner glass on page 68.)

Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction fluid on the glass strip. Clean the glass strip. (See Cleaning the scanner glass on page 68.)

92

Handling Incoming Calls


The machine “Hears” a voice as a CNG Tone.

If Fax Detect is set to On, your machine is more sensitive to sounds. It may mistakenly interpret certain voices or music on the line as a fax machine calling and respond with fax receiving tones. Deactivate the machine by pressing Stop/Exit. Try avoiding this problem by turning Fax Detect to Off. (See Fax Detect on page 39.)

Sending a fax call to the machine. If you answered on an extension or external telephone, press your Remote Activation Code (the factory setting is l 5 1). If you answered on an external telephone, press Start to receive the fax. When your machine answers, hang up.

Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, an alarm system or other custom feature on a single telephone line with your machine, it may create a problem sending or receiving faxes.

For example: If you subscribe to Call Waiting or some other custom service and its signal comes through the line while your machine is sending or receiving a fax, the signal can temporarily interrupt or disrupt the faxes. Brother's ECM (Error Correction Mode) feature should help overcome this problem. This condition is related to the telephone system industry and is common to all devices that send and receive information on a single, shared line with custom features. If avoiding a slight interruption is crucial to your business, a separate telephone line with no custom features is recommended.

Copying Difficulties


Cannot make a copy. Make sure that the COPY key is illuminated.

Poor copy results when using the ADF.

Try using the scanner glass. (See Using the scanner glass on page 30.)

Vertical black lines or streaks appear in copies.

Vertical black lines or streaks on copies are typically caused by dirt or correction fluid on the glass strip. Clean the glass strip. (See Cleaning the scanner glass on page 68.)

Fit to Page does not work correctly. Make sure your source document is not skewed.Reposition the document and try again.

Scanning Difficulties


TWAIN or WIA errors appear when

starting to scan. (Windows®)

Make sure the Brother TWAIN or WIA driver is chosen as the primary source in your scanning application. For example, in PaperPort™12SE with OCR, click File, Scan or Get Photo and click Select to choose the Brother TWAIN/WIA driver.

TWAIN or ICA errors appear when starting to scan. (Macintosh)

Make sure the Brother TWAIN driver is chosen as the primary source. In PageManager, click File, Select Source and choose the Brother TWAIN driver. Mac OS X 10.6.x users can also scan documents using the ICA Scanner Driver. See Scanning a document using the ICA driver (Mac OS X 10.6.x) in the Software User’s Guide.

Poor scanning results when using the ADF.

Try using the scanner glass. (See Using the scanner glass on page 30.)

Troubleshooting

93

B

OCR does not work. Try increasing the scanner resolution.

(Macintosh users)

Presto! PageManager must be downloaded and installed before use. See Accessing Brother Support (Macintosh) on page 3 for further instructions.

Software Difficulties


Cannot install software or print. (Windows® users only) Run the Repair MFL-Pro Suite program on the Installation CD-ROM. This program will repair and reinstall the software.

“Device Busy” Make sure the machine is not showing an error message on the LCD.

Cannot print images from FaceFilter Studio.

To use FaceFilter Studio, you must install the FaceFilter Studio application from the Installation CD-ROM supplied with your machine. To install FaceFilter Studio see the Quick Setup Guide.

Also, before you start FaceFilter Studio for the first time, you must make sure your Brother machine is turned on and connected to your computer. This will allow you to access all the functions of FaceFilter Studio.

PhotoCapture Center™ Difficulties


Removable Disk does not work correctly.

1 Have you installed the Windows® 2000 update? If not, do the following:

1) Unplug the USB cable.

2) Install the Windows® 2000 update using one of the following methods.

Install MFL-Pro Suite from the Installation CD-ROM. (See the Quick Setup Guide.)

Download the latest service pack from the Microsoft Web site.

3) Wait about 1 minute after you restart the PC, and then connect the USB cable.

2 Take out the memory card or USB Flash memory drive and put it back in again.

3 If you have tried “Eject” from within Windows®, take out the memory card or USB Flash memory drive before you continue.

4 If an error message appears when you try to eject the memory card or USB Flash memory drive, it means the card is being accessed. Wait a while and then try again.

5 If all of the above do not work, turn off your PC and machine, and then turn them on again. (You will have to unplug the power cord of the machine to turn it off.)

Cannot access Removable Disk from Desktop icon.

Make sure that you have correctly inserted the memory card or USB Flash memory drive.

Part of my photo is missing when printed.

Make sure that Borderless printing and Cropping are turned off. (See Borderless printing and Cropping in chapter 8 of the Advanced User’s Guide.)

Scanning Difficulties (continued)


94

Network Difficulties


Cannot print over the network. Make sure that your machine is powered on and is online and in Ready mode. Print a Network Configuration list (see Reports in chapter 6 of the Advanced User’s Guide.) and check the current Network settings printed in this list. Reconnect the LAN cable to the hub to verify that the cabling and network connections are good. If possible, try connecting the machine to a different port on your hub using a different cable. If the connections are good, the machine shows LAN Active for 2 seconds.

(If you are having Network problems, see the Network User’s Guide for more information.)

The network scanning feature does not work.

(Windows® users)

It is necessary to configure third-party Security/Firewall Software to allow Network scanning. To add port 54925 for Network scanning, enter the information below:

In Name: Enter any description, for example Brother NetScan.

In Port number: Enter 54925.

In Protocol: UDP is selected.

Please refer to the instruction manual that came with your third-party Security/Firewall Software or contact the software manufacturer.

(Macintosh users)

Re-select your machine in the Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model list in ControlCenter2.

The network PC-Fax Receive feature does not work.

(Windows® users only)

It is necessary to set the third-party Security/Firewall Software to allow PC-FAX Rx. To add port 54926 for Network PC-FAX Rx, enter the information below:

In Name: Enter any description, for example Brother PC-FAX Rx.

In Port number: Enter 54926.

In Protocol: UDP is selected.

Please refer to the instruction manual that came with your third-party Security/Firewall Software or contact the software manufacturer.

The Brother software cannot be installed.

(Windows® users)

Allow network access to the following programs if your security software displays an alert message during MFL-Pro Suite installation.

(Macintosh users)

If you are using a firewall function of anti-spyware or antivirus security software, temporarily disable it and then install the Brother software.

Cannot connect to wireless network.

Investigate the problem using the WLAN Report. Press Menu key, choose Print Reports and then press OK. Choose WLAN Report. For details, see the Network User’s Guide.

Reset the network settings. Press Menu key, choose Network and then press OK. Choose Network Reset. For details, see the Network User’s Guide.

Troubleshooting

95

B

Dial Tone detection B

When you send a fax automatically, by default your machine will wait for a fixed amount of time before it starts to dial the number. By changing the Dial Tone setting to Detection you can make your machine dial as soon as it detects a dial tone. This setting can save a small amount of time when sending a fax to many different numbers. If you change the setting and start having problems with dialling you should change back to the factory No Detection setting.

a Press Menu.


c Press a or b to choose Dial Tone.

d Press d or c to choose Detection or No Detection.Press OK.

e Press Stop/Exit.

Telephone line interference / VoIP B

If you are having problems sending or receiving a fax due to possible interference on the telephone line, you can change the compatibility setting, which reduces the modem speed to minimise errors.

a Press Menu.


c Press a or b to choose Compatibility.

d Press d or c to choose High, Normal or Basic(for VoIP).

Basic(for VoIP) cuts the modem speed to 9,600 bps and turns off colour fax receiving and ECM, except for colour fax sending. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed.

To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to Basic(for VoIP).

Normal sets the modem speed at 14,400 bps.

High increases the modem speed to 33,600 bps. (factory setting)

Press OK.

e Press Stop/Exit.

NoteVoIP (Voice over IP) is a type of phone system that uses an internet connection, rather than a traditional phone line.

96

Machine Information B

Checking the serial number B

You can see the machine’s serial number on the LCD.

a Press Menu.

b Press a or b to choose Machine Info.Press OK.

c Press a or b to choose Serial No.Press OK.

d Press Stop/Exit.

Reset functions B

The following reset functions are available:

1 Network

You can reset the print server back to its default factory settings such as the password and IP address information.

2 Speed Dial&Fax

Speed Dial & Fax resets the following settings:

Speed Dial

(Speed-Dial and Setup Groups)

Programmed fax jobs in the memory

(Polled Transmit, Delayed Fax and Delayed Batch Transmission)

Station ID

(Name and Number)

Remote Fax Options

(Fax Forwarding)

Report settings

(Transmission Verification Report, Quick Dial List and Fax Journal)

History

(Caller ID history and Outgoing Call)

Faxes in memory

3 All Settings

You can restore all settings to their factory defaults.

Brother strongly recommends you use this operation when you dispose of the machine.

NoteUnplug the interface cable before you choose Network or All Settings.

How to reset the machine B

a Press Menu.


c Press a or b to choose Reset.Press OK.

d Press a or b to choose the type of reset you want to use.Press OK.Press 1 to confirm.

e Press 1 to reboot the machine.

97

C

C

On-screen programming C

Your machine is designed to be easy to operate with LCD on-screen programming using the menu keys. User-friendly programming helps you take full advantage of all the menu selections your machine has to offer.

Since your programming is done on the LCD, we have created step-by-step on-screen instructions to help you program your machine. All you need to do is follow the instructions as they guide you through the menu selections and programming options.

Menu and features C

98

Menu table C

The menu table will help you understand the menu selections and options that are found in the machine's programs. The factory settings are shown in Bold with an asterisk.

Menu ( )

Level1 Level2 Level3 Options Descriptions Page

Ink Management Test Print — Print Quality

Alignment

Lets you check the print quality or alignment.

70

Cleaning — Black

Color

All

Lets you clean the print head.

69

Ink Volume — — Lets you check the available ink volume.

See 1.

General Setup Mode Timer — Off

0Sec

30Secs

1Min

2Mins*

5Mins

Sets the time to return to Fax mode.

Tray Setting

(MFC-J6710DW)

Tray#1 Paper Type

(Options)

Plain Paper*

Inkjet Paper

Brother BP71

Brother BP61

Other Glossy

Transparency

Sets the type of paper in the paper tray #1.

23

Paper Size

(Options)

A4*

A5

A3

10x15cm

Letter

Legal

Ledger

Sets the size of paper in the paper tray #1.

1 See Advanced User’s Guide.

The factory settings are shown in Bold with an asterisk.

Menu and features

99

C

General Setup

(Continued)

Tray Setting

(MFC-J6710DW)

(Continued)

Tray#2 Paper Type

(Option)

Plain Paper*

Sets the type of paper in the paper tray #2.

23

Paper Size

(Options)

A4*

A3

Letter

Legal

Ledger

Sets the size of paper in the paper tray #2.

Tray Use:Copy Tray#1

Tray#2

Auto Select*

Choose the tray that will be used for Copy mode.

23

Tray Use:Fax Tray#1

Tray#2

Auto Select*

Choose the tray that will be used for Fax mode.

24

Paper Setting

(MFC-J6510DW)

Paper Type Plain Paper*

Inkjet Paper

Brother BP71

Brother BP61

Other Glossy

Transparency

Sets the type of paper in the paper tray.

22

Paper Size A4*

A5

A3

10x15cm

Letter

Legal

Ledger

Sets the size of paper in the paper tray.

22




100

General Setup

(Continued)

Volume Ring Off

Low

Med*

High

Adjusts the ring volume. 8

Beeper Off

Low*

Med

High

Adjusts the volume level of the beeper.

9

Speaker Off

Low

Med*

High

Adjusts the volume level of the speaker.

9

Auto Daylight — On*

Off

Changes for Daylight Savings Time automatically.

See 1.

LCD Settings Backlight Light*

Med

Dark

You can adjust the brightness of the LCD backlight.

9

Dim Timer Off

10Secs

20Secs

30Secs*

You can set how long the LCD backlight stays on for after the last key press.

See 1.

Wallpaper 1*

2

3

4

You can choose the wallpaper of the LCD.

Sleep Mode — 1Min

2Mins

3Mins

5Mins*

10Mins

30Mins

60Mins

You can choose how long the machine will remain idle before it goes into sleep mode.

A3 - Short Grain — On*

Off

Turn on this setting when you use A3 short grain paper.

24

Function Lock Set Password — You can restrict selected machine operation for up to 10 restricted users and all other non-authorized Public users.

See 1.

Lock OffiOn —

Setup User —




Menu and features

101

C

Fax Setup Receive Ring Delay 0

1

2*

3

4

5

6

7

8

(Example for the U.K.)

Sets the number of rings before the machine answers in Fax Only or Fax/Tel mode.

38

F/T Ring Time 20Secs

30Secs*

40Secs

70Secs

Sets the fast double-ring time in Fax/Tel mode.

38

Fax Detect On*

Off

Receives fax messages automatically when you answer a call and hear fax tone.

39

Remote Codes On*

(l51, #51)

Off

Allows you to answer all calls at an extension or external telephone and use codes to turn the machine on or off. You can personalize these codes.

47

Auto Reduction On*

Off

Cuts the size of incoming faxes to fit the paper size.

See 1.

Memory Receive Off*

Fax Forward

Fax Storage

PC Fax Receive

You can set the machine to either forward fax messages, store incoming faxes in the memory (so you can retrieve them while you are away from your machine), or send faxes to your PC.

If you choose Fax Forward or PC-Fax Receive, you can turn on the safety feature Backup Print.




102

Fax

(Continued)

Report Setting XMIT Report On

On+Image

Off*

Off+Image

Off2

Off2+Image

Initial setup for Transmission Verification Report and Fax Journal Report.

34

Journal Period Off

Every 50 Faxes*

Every 6 Hours

Every 12 Hours

Every 24 Hours

Every 2 Days

Every 7 Days

See 1.

Print Document — — Prints incoming faxes stored in the memory.

Remote Access — --- Set your own code for Remote Retrieval.

Remaining Jobs — — Check which jobs are in the memory and lets you cancel chosen jobs.

Miscellaneous BT Call Sign On

(U.K. Only)

On

Off*

Uses with BT Call Sign.

Caller ID

(U.K. and Ireland only)

On*

Off

View or print a list of the last 30 Caller IDs stored in the memory.

41




Menu and features

103

C

Network menu

Level1 Level2 Level3 Level4 Options Descriptions

Network Wired LAN TCP/IP BOOT Method Auto*

Static

RARP

BOOTP

DHCP

Chooses the BOOT method that best suits your needs.

IP Address [000-255].

[000-255].

[000-255].

[000-255]

Enter the IP address.

Subnet Mask [000-255].

[000-255].

[000-255].

[000-255]

Enter the Subnet mask.

Gateway [000-255].

[000-255].

[000-255].

[000-255]

Enter the Gateway address.

Node Name BRNXXXXXXXXXXXX Enter the Node name.

WINS Config Auto*

Static

Chooses the WINS configuration mode.

WINS Server (Primary) 000.000.000.000

(Secondary) 000.000.000.000

Specifies the IP address of the primary or secondary server.

DNS Server (Primary) 000.000.000.000

(Secondary) 000.000.000.000


APIPA On*

Off

Automatically allocates the IP address from the link-local address range.

IPv6 On

Off*

Enable or disable the IPv6 protocol.

See Network User’s Guide.


104

Network

(Continued)

Wired LAN

(Continued)

Ethernet — Auto*

100B-FD

100B-HD

10B-FD

10B-HD

Chooses the Ethernet link mode.

MAC Address — — You can see your machine’s MAC address from the control panel.

WLAN TCP/IP BOOT Method Auto*

Static

RARP

BOOTP

DHCP

Chooses the BOOT method that best suits your needs.

IP Address [000-255].

[000-255].

[000-255].

[000-255]

Enter the IP address.

Subnet Mask [000-255].

[000-255].

[000-255].

[000-255]

Enter the Subnet mask.

Gateway [000-255].

[000-255].

[000-255].

[000-255]

Enter the Gateway address.

Node Name BRWXXXXXXXXXXXX Enter the Node name.

WINS Config Auto*

Static

Chooses the WINS configuration mode.

WINS Server (Primary) 000.000.000.000

(Secondary) 000.000.000.000


DNS Server (Primary) 000.000.000.000

(Secondary) 000.000.000.000





Menu and features

105

C

Network

(Continued)

WLAN

(Continued)

TCP/IP

(Continued)

APIPA On*

Off

Automatically allocates the IP address from the link-local address range.

IPv6 On

Off*

Enable or disable IPv6 protocol for a wireless LAN.

Setup Wizard — — You can manually configure your print server for a wireless network.

WPS/AOSS — — You can easily configure your wireless network settings using the one-button push method.

WPS w/PIN Code — — You can easily configure your wireless network settings using WPS with a PIN code.

WLAN Status Status — You can see the current wireless network status.

Signal — You can see the current wireless network signal strength.

SSID — You can see the current SSID.

Comm. Mode — You can see the current Communication Mode.

MAC Address — — You can see your machine’s MAC address from the control panel.




106

Network

(Continued)

E-mail/IFAX

(Available after IFAX is downloaded)

Mail Address — — Enter the mail address. (Up to 60 characters)

Setup Server SMTP Server Name(Up to 30 characters)

IP Address[000-255]. [000-255]. [000-255]. [000-255]

Enter the SMTP server address.

SMTP Port [00001-65535] Enter the SMTP port number.

Auth. for SMTP None*

SMTP-AUTH

POP bef.SMTP

Selects the Security method for E-mail notification.

POP3 Server Name(Up to 30 characters)

IP Address[000-255]. [000-255]. [000-255]. [000-255]

Enter the POP3 server address.

POP3 Port [00001-65535] Enter the POP3 port number.

Mailbox Name — Enter the mail box name. (Up to 20 characters)

Mailbox Pwd — Enter the password to login to the POP3 server. (Up to 20 characters)

APOP On

Off*

Enables or disables APOP.




Menu and features

107

C

Network

(Continued)

E-mail/IFAX


(Continued)

Setup Mail RX Auto Polling On*

Off

Automatically checks the POP3 server for new messages.

Poll Frequency 10Min(s)* Sets the interval for checking for new messages on the POP3 server.

Header All

Subject+From+To

None*

Selects the contents of the mail header to be printed.

Del Error Mail On*

Off

Deletes error mails automatically.

Notification On

MDN

Off*

Receives notification messages.

Setup Mail TX Sender Subject — Displays the subject that is attached to the Internet Fax data.

Size Limit On

Off*

Limits the size of E-mail documents.

Notification On

Off*

Sends notification messages.

Setup Relay Rly Broadcast On

Off*

Relays a document to another fax machine over the internet.

Relay Domain RelayXX: Registers the Domain name.

Relay Report On

Off*

Prints the Relay Broadcast Report.

Time Zone — UTCXXX:XX — Sets the time zone for your country.

Network I/F — Wired LAN*

WLAN

— You can choose the network connection type.

Network Reset — — — Restore all network settings to factory default.




108

Menu ( ) (continued)


Print Reports XMIT Verify — — Prints these lists and reports.

See 1.

Help List — —

Quick Dial — Alphabetic Order

Numeric Order

Fax Journal — —

User Settings — —

Network Config — —

WLAN Report — —

Caller ID hist. — —

Machine Info. Serial No. — — Lets you check the serial number of your machine.

96

Initial Setup Receive Mode — Fax Only*

Fax/Tel

External TAD

Manual

Choose the receive mode that best suits your needs.

36

Date&Time — — Puts the date and time on the LCD and in headings of faxes you send.

See 2.

Station ID — Fax:

Name:

Set your name and fax number to appear on each page you fax.

Tone/Pulse — Tone*

Pulse

Choose the dialling mode.

Dial Tone — Detection

No Detection*

Turns Dial Tone Detection on or off.

95

Phone Line Set — Normal*

PBX

ISDN

Choose the telephone line type.

42

1 See Advanced User’s Guide.2 See Quick Setup Guide.


Menu and features

109

C

Initial Setup

(Continued)

Compatibility — High*

Normal

Basic(for VoIP)

Adjusts the modem speed to help resolve transmission problems.

95

Reset Network — Resets the print server back to its factory default settings, such as the password and IP address information.

96

Speed Dial&Fax — Deletes all stored Speed Dial numbers and faxes, restores the Station ID, Quick Dial List, Transmission Verification Report and Fax Journal back to the factory default settings.

All Settings — Resets all the machine’s settings back to the settings that were set at the factory.


1 See Advanced User’s Guide.2 See Quick Setup Guide.


110

FAX ( )


Fax Resolution — — Standard*

Fine

S.Fine

Photo

Sets the resolution for outgoing faxes.

See 1.

Contrast — — Auto*

Light

Dark

Changes the lightness or darkness of faxes you send.

Glass ScanSize — — A4*

A3

Letter

Legal

Ledger

Sets the glass scan size for faxes.

33

Internet Fax


— — — You can send and receive fax documents using the Internet.

See 2.

Phone Book Search — AlphabeticOrder

Numeric Order

You can dial by pressing only a few keys (and Start).

50

Set One Touch — — Stores One Touch Dial numbers, so you can dial by pressing only a few keys (and Start).

52

Set Speed Dial — — Stores Speed Dial numbers, so you can dial by pressing only a few keys (and Start).

53

Setup Groups — — You can set up Group numbers for Broadcasting.

See 1.

Outgoing Call Send a fax

Add To PhoneBook

Delete

— — You can choose a number from the Outgoing Call history and then make a telephone call to it, send a fax to it, add it to Speed Dial, or delete it.

51

Caller ID hist.


Send a fax

Add To PhoneBook

Delete

— — You can choose a number from the Caller ID history and then send a fax to it, add it to Speed Dial, or delete it.

51

1 See Advanced User’s Guide.2 See Network User’s Guide.


Menu and features

111

C

Broadcasting Dial Type


— Fax/Tel*

E-Address

You can send the same fax message to more than one fax number.

See 1.

Add Number

Phone Book

Complete

— —

Delayed Fax — — On

Off*

Sets the time of day in 24-hour format that the delayed faxes will be sent.

Batch TX — — On

Off*

Combines delayed faxes to the same fax number at the same time of day into one transmission.

Real Time TX — — On

Off*

You can send a fax without using the memory.

Polled TX — — Standard

Secure

Off*

Sets up the document on your machine to be retrieved by another fax machine.

Polling RX — — Standard

Secure

Timer

Off*

Sets up your machine to poll another fax machine.

Overseas Mode — — On

Off*

If you are having difficulty sending faxes overseas, set this to On.

Set New Default — — Fax Resolution

Contrast

Glass ScanSize

Real Time TX

You can save your fax settings.

Factory Reset — — — You can restore all settings to the factory settings.


1 See Advanced User’s Guide.2 See Network User’s Guide.


112

SCAN ( )

Level1 Option1 Option2 Option3 Descriptions Page

Scan to File — — — You can scan a monochrome or a colour document into your computer.

See 1.

Scan to Media (when a memory card or USB Flash memory drive is inserted)

Quality — Color 100

Color 200*

Color 300

Color 600

B/W 100

B/W 200

B/W 300

You can choose the scan resolution and file format for your document.

61

File Type — (If you choose colour option in Quality setting)

PDF*

JPEG

(If you choose Mono option in Quality setting)

TIFF

PDF*

Glass ScanSize — A4*

A3

Letter

Legal

Ledger

Sets the glass scan size for scans.

See 2.

File Name — — You can rename the file. 61

Auto Crop — On

Off*

Scan multiple documents placed on the scanner glass to a memory card or USB Flash memory drive one at a time.

See 2.

Set New Default — Quality

File Type

Glass ScanSize

Auto Crop

You can save your scan settings.

Factory Reset — — You can restore all settings to the factory settings.

1 See Software User’s Guide.2 See Advanced User’s Guide.3 (Macintosh users)



Menu and features

113

C

Scan to Network (Profile Name) — — You can send a scanned data to a CIFS server on your local network or on the internet.

See 1.

Scan to FTP (Profile Name) — — You can send a scanned data via FTP.

Scan to E-mail PC — — You can scan a monochrome or a colour document into your E-mail application.

E-mail Server


Manual — You can enter an E-mail address using the dial pad.

Phone Book AlphabeticOrder

Numeric Order

You can search for an E-mail address that you have stored in the machine.

Quality Color 100

Color 200*

Color 300

Color 600

B/W 100

B/W 200

B/W 300

Chooses the file format to send the scanned data via E-mail server.

File Type (If you choose colour option in Quality setting)

PDF*

JPEG

(If you choose Mono option in Quality setting)

TIFF

PDF*

Glass ScanSize A4*

A3

Letter

Legal

Ledger

Sets the glass scan size for scans.





114

Scan to E-mail

(Continued)

E-mail Server


(Continued)

Set New Default Quality

File Type

Glass ScanSize

You can save your scan settings.

See 1.

Factory Reset — You can restore all settings to the factory settings.

Scan to OCR 3 — — — You can have your text document converted to an editable text file.

Scan to Image — — — You can scan a colour picture into your graphics application.





Menu and features

115

C

COPY ( )


Quality — — Fast

Normal*

Best

Choose the Copy resolution for the next copy.

See 1.

Paper Type — — Plain Paper*

Inkjet Paper

Brother BP71

Brother BP61

Other Glossy

Transparency

Choose the paper type that matches the paper in the tray.

56

Paper Size — — A4*

A5 (tray #1 only)

A3

10x15cm (tray #1 only)

Letter

Legal

Ledger

Choose the paper size that matches the paper in the tray.

56

Tray Select

(MFC-J6710DW)

— — Tray#1

Tray#2

Auto Select*

Choose the tray that will be used for Copy mode.

56

Enlarge/Reduce 100%* — — — See 1.

Enlarge — 198% 10x15cmiA4

186% 10x15cmiLTR

141% A4iA3, A5iA4

You can choose the enlargement ratio for the next copy.

Reduce — 97% LTRiA4

93% A4iLTR

83% LGLiA4

69% A3iA4, A4iA5

47% A4i10x15cm

You can choose the reduction ratio for the next copy.

Fit to Page — — Your machine will adjust the size automatically to the paper size you set.

Custom(25-400%) — — You can choose the enlargement or reduction ratio for your type of document.



116

Density — — Adjusts the density of copies.

See 1.

Stack/Sort — — Stack*

Sort

You can choose to stack or sort multiple copies.

Page Layout — Off(1 in 1)*

2 in 1 (P)

2 in 1 (L)

2 in 1 (ID)

4 in 1 (P)

4 in 1 (L)

1 to 2

Poster(2 x 1)

Poster(2 x 2)

Poster(3 x 3)

If you choose A3 or Ledger: (When 2 in 1 is chosen)

LGRx2 i LGRx1

LTRx2 i LGRx1

A3x2 i A3x1

A4x2 i A3x1

(When poster 2x2 is chosen)

LGRx1 i LGRx4

LTRx1 i LGRx4

A3x1 i A3x4

A4x1 i A3x4

You can make N in 1 or Poster copies.

Skew Adjustment — — Auto*

Off

If your scanned copy is skewed, your machine can correct the data automatically.

Duplex Copy On Flip Type LongEdge Flip(P)*

LongEdge Flip(L)

ShortEdge Flip(P)

ShortEdge Flip(L)

Enables or disables duplex printing. You can also choose long edge or short edge duplex printing.

Advanced Normal*

DX1

DX2

A3/LGR DXSetting

Fit to Page*

Keep Scale

Off* — —




Menu and features

117

C

AdvancedSettings

— — Off*

Ink Save Mode

Thin Paper Copy

Book Copy

Watermark Copy

You can choose various settings for copy such as Book Copy and Watermark Copy.

See 1.

Set New Default — — Quality

Tray Select (MFC-J6710DW)

Enlarge/Reduce

Density

Page Layout

Skew Adjustment

Ink Save Mode

Thin Paper Copy

Duplex Copy

You can save your copy settings.

Factory Reset — — — You can restore all settings to the factory settings.




118

Watermark Copy Settings

Option1 Option2 Option3 Option4 Descriptions Page

Template Text — CONFIDENTIAL*

DRAFT

COPY

Uses a template to place text into your document as a Watermark.

See 1.

Position A

B

C

D

E*

F

G

H

I

Pattern

Size Small

Medium*

Large

Angle -90

-45*

0

45

90

Transparency -2

-1

0*

+1

+2

Colour Red

Orange

Yellow

Blue

Green

Purple

Black*

Apply —



Menu and features

119

C

Media (Select image from media)

Position A

B

C

D

E*

F

G

H

I

Pattern

Places a logo or text into your document as a Watermark using an image from removable media.

See 1.

Size Small

Medium*

Large

Angle -90

-45*

0

45

90

Transparency -2

-1

0*

+1

+2

Apply —

Scan (Set watermark document and press Start.)

Transparency -2

-1

0*

+1

+2

You can place a logo or text into your document as a Watermark by scanning a paper document.

Apply —




120

PHOTO CAPTURE ( )


View Photo(s) — — See the print settings in the following table.

You can preview your photos on the LCD.

60

Print Index Layout Format — 6 Images/Line*

5 Images/Line

You can print a thumbnail page.

See 1.

Paper Type Plain Paper*

Inkjet Paper

Brother BP71

Brother BP61

Other Glossy

Paper Size A4*

Letter

Print Photos — — See the print settings in the following table.

You can print an individual image.

Enhance Photos Auto Correct

Enhance Skin

Enhance Scenery

Remove Red-Eye

Night Scene

Fill Light

Whiteboard

Monochrome

Sepia

— You can adjust your photos with these settings.

Search by Date — — You can search your photos in date order.

Print AllPhotos

— — You can print all photos in your memory card or USB Flash memory drive.

Slide Show — — The machine starts a Slide Show of your photos.

Trimming — — You can trim your photo and print a part of the image.



Menu and features

121

C

Print Settings


Print Quality

(Not available for DPOF printing.)

Normal

Photo*

— — Choose the print quality. See 1.

Paper Type Plain Paper

Inkjet Paper

Brother BP71

Brother BP61

Other Glossy*

— — Choose the paper type.

Paper Size 10x15cm*

13x18cm

A4

A3

Letter

Ledger

(When A4 or Letter is chosen)

8 x 10cm

9 x 13cm

10 x 15cm

13 x 18cm

15 x 20cm

Max. Size*

— Choose the paper and print size.

Brightness

(Not available when Enhance Photos is chosen.)

— — Adjusts the brightness.

Contrast


— — Adjusts the contrast.



122

Color Enhance


On

Off*

White Balance Adjusts the hue of the white areas.

See 1.

Sharpness Enhances the detail of the image.

Color Density Adjusts the total amount of colour in the image.

Cropping On*

Off

— — Crops the image around the margin to fit the paper size or print size. Turn this feature off if you want to print whole images or prevent unwanted cropping.

Borderless On*

Off

— — Expands the printable area to fit the edges of the paper.

Date Print

(Not available for DPOF printing.)

On

Off*

— — Prints the date on your photo.

Set New Default Print Quality

Paper Type

Paper Size

Brightness

Contrast

Color Enhance

Cropping

Borderless

Date Print

— — You can save your print settings.

Factory Reset — — — You can restore all the settings to factory settings.




+2

+1

-1

-2

+2

+1

-1

-2

+2

+1

-1

-2

Menu and features

123

C

Phone Book ( )

Redial/Pause ( )

Fax Preview ( )


Search — — AlphabeticOrder

Numeric Order

You can search for names you have stored in the Speed Dial memory.

50

Set One Touch — — — You can store your most frequently called numbers on the One Touch keys.

52

Set Speed Dial — — — Stores Speed Dial numbers, so you can dial by pressing only a few keys (and Start).

53

Setup Groups — — — Sets up Group numbers for Broadcasting.

See 1.




Outgoing Call Send a fax

Add To PhoneBook

Delete

— — You can choose a number from the Outgoing Call history and then make a telephone call to it, send a fax to it, add it to Speed Dial, or delete it.

51

Caller ID hist.


Send a fax

Add To PhoneBook

Delete

— — You can choose a number from the Caller ID history and then send a fax to it, add it to Speed Dial, or delete it.

51



Fax Preview — — ON

OFF*

You can view faxes you send and receive on the LCD screen.

39


124

Entering Text C

When you are setting certain menu selections, such as the Station ID, you may need to enter text into the machine. Most dial pad keys have three or four letters printed on keys. The keys for 0, # and l do not have printed letters because they are used for special characters.

Press the appropriate dial pad key the number of times shown in this reference table to access the character you want.

Inserting spaces C

To enter a space in a fax number, press c once between numbers. To enter a space in a name, press c twice between characters.

Making corrections C

If you entered an incorrect character and want to change it, press d or c to move the cursor under the incorrect character. Then press Clear. Re-enter the correct character. You can also back up and insert characters.

Repeating letters C

If you need to enter a letter that is on the same key as the letter before, press c to move the cursor to the right before you press the key again.

Special characters and symbols C

Press l, # or 0, repeatedly until you see the special character or symbol you want.

Press Key

one time

two times

three times

four times

five times

2 A B C 2 A

3 D E F 3 D

4 G H I 4 G

5 J K L 5 J

6 M N O 6 M

7 P Q R S 7

8 T U V 8 T

9 W X Y Z 9

Press l for (space) ! " # $ % & ' ( ) + , - . / mPress # for : ; < = > ? @ [ ] ^ _

Press 0 for Ä Ë Ö Ü À Ç È É 0

125

D

D

General D

NoteThis chapter provides a summary of the machines’ specifications. For additional specifications visit http://www.brother.com/ for details.

1 Measured when the machine is connected to the USB interface.2 When using ADF, single-side printing, resolution: standard / document: ISO/IEC 24712 printed pattern.

Specifications D

Printer Type Inkjet

Print Method Mono:

Colour:

Piezo with 210 1 nozzle

Piezo with 210 3 nozzles

Memory Capacity 64 MB

LCD (Liquid Crystal Display)

Wide 3.3 in. (82.8 mm) TFT Colour LCD

Power Source AC 220 to 240V 50/60Hz

Power Consumption 1 Copying Mode: Approx. 26 W 2

Ready Mode: Approx. 7.5 W

Sleep Mode: Approx. 4 W

Off: Approx. 0.3 W


126

1 Noise depends on printing conditions.

2 Office equipment with LWAd>6.30 B(A) is not suitable for use in room where people do primarily intellectual work. Such equipment should be placed in separate rooms because of the noise emission.

Dimension (MFC-J6510DW)

(MFC-J6710DW)

Weight (MFC-J6510DW) 15.8 kg

(MFC-J6710DW) 18.2 kg

Noise Operating: LPAm = 50 dB or less 1

Noise per ISO9296 Copying: (MFC-J6510DW)

LWAd = 6.38 B(A) 2 (Mono)

LWAd = 6.01 B(A) (Colour)

(MFC-J6710DW)

LWAd = 6.31 B(A) 2 (Mono)

LWAd = 6.22 B(A) (Colour)

Ready: (MFC-J6510DW)

LWAd = 3.05 B(A) (Mono/Colour)

(MFC-J6710DW)

LWAd = 3.07 B(A) (Mono/Colour)

Temperature Operating:

Best Print Quality:

10 to 35 C

20 to 33 C

Humidity Operating:

Best Print Quality:

20 to 80% (without condensation)

20 to 80% (without condensation)

ADF (automatic document feeder)

Up to 35 pages

Paper: 80 g/m2 A4 or Letter size

Document Size ADF Width: 148 mm to 297 mm

ADF Length: 148 mm to 431.8 mm

Scanner Glass Width: Max. 297 mm

Scanner Glass Length: Max. 431.8 mm

590 mm

540 mm

669 mm

489 mm

257 mm

590 mm

540 mm

669 mm

489 mm

331 mm

Specifications

127

D

Print media D

1 For glossy paper or transparencies, remove printed pages from the output paper tray immediately after they exit the machine to avoid smudging.

2 Use only transparencies recommended for inkjet printing.3 See Paper type and size for each operation on page 27.

Paper Input Paper Tray #1

Paper type:

Plain paper, inkjet paper (coated paper),

glossy paper 1 and transparency 1 2

Paper size:

A4, Ledger, A3, Legal, Executive, Letter, A5, A6, JIS B4, JIS B5, Envelopes (commercial No.10, DL, C5, Monarch, Y4), Photo 10 15 cm, Photo L 89 127 mm, Photo 2L 13 18 cm,

Index Card and PostCard 3

Width: 89 mm - 297 mm

Length: 127 mm - 431.8 mm

For more details, see Paper weight and thickness on page 28.

Maximum paper tray capacity:

Approx. 250 sheets of 80 g/m2 plain paper

Paper Tray #2 (MFC-J6710DW)

Paper type:

Plain paper

Paper size:

A4, Ledger, A3, Legal, Executive, Letter, JIS B4, JIS B5





Approx. 250 sheets of 80 g/m2 plain paper

128

1 For glossy paper or transparencies, remove printed pages from the output paper tray immediately after they exit the machine to avoid smudging.

2 Use only transparencies recommended for inkjet printing.3 See Paper type and size for each operation on page 27.

Paper Input

(Continued)

Manual Feed Slot

Paper type:

Plain paper, inkjet paper (coated paper), glossy paper 1,

transparency 1 2, envelopes and Labels

Paper size:

A4, Ledger, A3, Legal, Executive, Letter, A5, A6, JIS B4, JIS B5, Envelopes (commercial No.10, DL, C5, Monarch, Y4), Photo 10 15 cm, Photo L 89 127 mm, Photo 2L 13 18 cm,

Index Card and PostCard 3





1 sheet of special print media

Paper Output Up to 50 sheets of A4 plain paper (face up print delivery to the output

paper tray) 1

Specifications

129

D

Fax D

1 “Pages” refers to the “ITU-T Test Chart #1” (a typical business letter, Standard resolution, MMR code). Specifications and printed materials are subject to change without prior notice.

Compatibility ITU-T Super Group 3

Modem Speed Automatic Fallback

33,600 bps

Scanning Width 288 mm (A3)

Printing Width 291 mm (A3)

Greyscale Levels: 64 (B&W) / 256 (Colour)

Resolution Standard

203 98 dpi (Mono)

203 196 dpi (Colour)

Fine

203 196 dpi (Mono/Colour)

Superfine

203 392 dpi (Mono)

Photo

203 196 dpi (Mono)

One Touch Dial 16 (8 2)

Speed Dial 100 stations 2 numbers

Groups Up to 6

Broadcasting 266 (200 Speed Dial/16 One Touch Dial/ 50 Manual Dial)

Automatic Redial 3 times at 5 minute intervals

Memory Transmission Up to 400 1 pages

Out of Paper Reception Up to 400 1 pages

130

Copy D

1 Minimum top and bottom margins of 22 mm

Colour/Monochrome Yes/Yes

Copy Width Max. 291 mm

Multiple Copies Stacks/Sorts up to 99 pages

Enlarge/Reduce 25% to 400% (in increments of 1%)

Resolution Prints up to 1200 1200 dpi

Duplex Paper type:

Plain paper

Paper size:

A4, Ledger 1, A3 1, Legal, Letter, A5

Specifications

131

D

PhotoCapture Center™ D

1 Memory cards, adapters and USB Flash memory drive are not included.2 USB 2.0 Standard

USB Mass Storage standard from 16 MB to 32 GBSupport format: FAT12/FAT16/FAT32

3 Progressive JPEG format is not supported.4 Motion JPEG only5 See Paper type and size for each operation on page 27.

Compatible Media 1 Memory Stick™ (16 MB - 128 MB)Memory Stick PRO™ (256 MB - 32 GB) Memory Stick Duo™ (16 MB - 128 MB) Memory Stick PRO Duo™ (256 MB - 32 GB) Memory Stick Micro™ (M2™) with Adapter MultiMedia Card (32 MB - 2 GB) MultiMedia Card plus (128 MB - 4 GB) MultiMedia Card mobile with Adapter (64 MB - 1 GB) SD (16 MB to 2 GB) miniSD with Adapter microSD with Adapter SDHC (4 GB to 32 GB) miniSDHC with Adapter microSDHC with Adapter

USB Flash memory drive 2

Resolution Up to 1200 2400 dpi

File Extension(Media Format) DPOF (ver. 1.0, ver. 1.1), Exif DCF (up to ver. 2.1)

(Image Format) Photo Print: JPEG 3, AVI 4, MOV 4 Scan to Media: JPEG, PDF (Colour)

TIFF, PDF (Monochrome)

Number of Files Up to 999 files (The folder inside memory cards or USB Flash memory drive is also counted.)

Folder File must be stored in the 4th folder level of the memory card or USB Flash memory drive.

Borderless A4, Letter, Ledger, A3, Photo 10 15 cm,

Photo 2L 13 18 cm 5

132

PictBridge D

Compatibility Supports the Camera & Imaging Products Association PictBridge standard CIPA DC-001.

Visit http://www.cipa.jp/pictbridge/ for more information.

Interface USB direct interface

http://www.cipa.jp/pictbridge/

Specifications

133

D

Scanner D

1 For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com/.2 Windows® XP in this User’s Guide includes Windows® XP Home Edition, Windows® XP Professional, and Windows®

XP Professional x64 Edition.3 Maximum 1200 1200 dpi scanning when using the WIA Driver for Windows® XP, Windows Vista® and Windows® 7

(resolution up to 19200 19200 dpi can be selected by using the Brother scanner utility).

Colour/Monochrome Yes/Yes

TWAIN Compliant Yes (Windows® 2000 Professional/Windows® XP/

Windows® XP Professional x64 Edition/Windows Vista®/

Windows® 7)

Mac OS X 10.4.11, 10.5.x, 10.6.x 1

WIA Compliant Yes (Windows® XP 2/Windows Vista®/Windows® 7)

ICA Compliant Yes (Mac OS X 10.6.x)

Colour Depth 48 bit colour Processing (Input)

24 bit colour Processing (Output)

Resolution Up to 19200 19200 dpi (interpolated) 3

Up to 2400 2400 dpi (optical) (Scanner Glass)

Up to 2400 1200 dpi (optical) (ADF)

Scanning Speed Monochrome: up to 3.49 sec.

Colour: up to 3.37 sec.

(A4 size at 100 100 dpi)

Scanning Width Up to 291 mm

Scanning Length Up to 426 mm

Greyscale 256 levels


134

Printer D

1 When the Borderless feature is set to On.2 See Paper type and size for each operation on page 27.3 When printing on A3 size paper.4 Minimum top and bottom margins of 22 mm5 For detailed specifications visit http://www.brother.com/.

Resolution Up to 1200 6000 dpi

Printing Width 291 mm [297 mm (borderless) 1] 3

Borderless A4, Letter, Ledger, A3, A6, B4, Photo 10 15 cm, Index Card 127 203 mm

Photo L 89 127 mm, Photo 2L 13 18 cm 2

Duplex Paper type:

Plain paper

Paper size:

A4, Letter, Ledger 4, A3 4, Legal, A5, A6, Executive,

B4 4, B5

Print Speed 5


Specifications

135

D

Interfaces D

1 Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface.

2 Third party USB ports are not supported.3 See the Network User’s Guide for detailed network specifications.

USB 1 2 A USB 2.0 interface cable that is no longer than 2 m.

LAN cable 3 Ethernet UTP cable category 5 or greater.

Wireless LAN IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode)

136

Computer requirements D

SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS

Computer Platform & Operating System Version

Supported PC Software Functions

PC Interface

Processor Minimum

Speed

Minimum RAM

Recommended RAM

Hard Disk Space to install

For Drivers

For Applications

Windows® Operating

System 1

Windows® 2000 Professional 6

Printing,

PC Fax 4, Scanning, Removable

Disk 7

USB, 10/100 Base-TX (Ethernet), Wireless 802.11b/g/n

Intel® Pentium® II or equivalent

64 MB 256 MB 150 MB 500 MB

Windows® XP Home 2 5

Windows® XP Professional 2 5

128 MB 150 MB 500 MB

Windows® XP Professional x64 Edition 2

64-bit (Intel® 64 or AMD64) supported CPU

256 MB 512 MB 150 MB 500 MB

Windows Vista® 2 5 Intel® Pentium® 4 or equivalent


512 MB 1 GB 500 MB 1.2 GB

Windows® 7 2 5 1 GB (32 bit)2 GB

(64 bit)

1 GB (32 bit)2 GB

(64 bit)

650 MB 1.2 GB

Windows Server® 2003 (print only via network)

Printing 10/100 Base-TX (Ethernet), Wireless 802.11b/g/n

Intel® Pentium®III or equivalent

256 MB 512 MB 50 MB N/A

Windows Server® 2003 x64 Edition (print only via network)


Windows Server® 2003 R2 (print only via network)

Intel® Pentium®III or equivalent

Windows Server® 2003 R2 x64 Edition (print only via network)


512 MB 1 GB

Windows Server® 2008 (print only via network)

Intel® Pentium® 4 or equivalent 64-bit (Intel® 64 or AMD64) supported CPU

2 GB

Windows Server® 2008 R2 (print only via network)


Macintosh Operating System

Mac OS X 10.4.11, 10.5.x

Printing, PC Fax Send 4, Scanning, Removable Disk 7

USB 3, 10/100 Base-TX (Ethernet), Wireless 802.11b/g/n

PowerPC G4/G5

Intel® Core™ Processor

512 MB 1 GB 80 MB 400 MB

Mac OS X 10.6.x Intel® Core™ Processor

1 GB 2 GB

Conditions:1 Microsoft® Internet Explorer® 5.5 or greater.2 For WIA, 1200 1200 resolution. Brother Scanner

Utility enables to enhance up to 19200 19200 dpi.3 Third party USB ports are not supported.4 PC Fax supports black and white only.5 PaperPort™12SE supports Windows® XP (SP3 or higher),

Windows Vista® (SP2 or higher) and Windows® 7.6 PaperPort™11SE supports Microsoft® SP4 or higher

for Windows® 2000 (Available from the internet).7 Removable disk is a function of PhotoCapture Center™.

For the latest driver updates, visit us at http://solutions.brother.com/.

All trademarks, brand and product names are the property of their respective companies.


Specifications

137

D

Consumable items D

Ink The machine uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly.

Service Life of Ink Cartridge

The first time you install a set of ink cartridges the machine will use an amount of ink to fill the ink delivery tubes for high quality printouts. This process will only happen once. After this process is complete the cartridges provided with your machine will have a lower yield than standard cartridges (65%). With all following ink cartridges you can print the specified number of pages.

Replacement Consumables

<Super High Yield Black> LC1280XLBK <Super High Yield Yellow> LC1280XLY <Super High Yield Cyan> LC1280XLC <Super High Yield Magenta> LC1280XLM

Black - Approximately 2,400 pages 1

Yellow, Cyan, Magenta - Approximately 1,200 pages 1

<High Yield Black> LC1240BK <High Yield Yellow> LC1240Y <High Yield Cyan> LC1240C <High Yield Magenta> LC1240M

Black, Yellow, Cyan, Magenta - Approximately 600 pages 1

1 Approx. cartridge yield is declared in accordance with ISO/IEC 24711.

For more information about the replacement consumables, visit us at http://www.brother.com/pageyield/.

What is Innobella™?

Innobella™ is a range of genuine consumables offered by Brother. The name "Innobella™" derives from the words "Innovation" and "Bella" (meaning "Beautiful" in Italian) and is a representation of the "innovative" technology providing you with "beautiful" and "long lasting" print results.

When you print photo images, Brother recommends Innobella™ glossy photo paper (BP71 series) for high quality. Brilliant prints are made easier with Innobella™ Ink and paper.

http://www.brother.com/pageyield/

138

Network (LAN) D

NoteFor details about the full Network specifications, see the Network User’s Guide.

1 See the Computer Requirements chart on page 136.2 If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is

available as a download from http://solutions.brother.com/.

LAN You can connect your machine to a network for Network Printing,

Network Scanning, PC Fax Send, PC Fax Receive (Windows® only),

Remote Setup, and access photos from PhotoCapture Center™ 1.

Also included is Brother BRAdmin Light 2 Network Management software.

Wireless Network Security

SSID (32 chr), WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES)

Setup Support Utility AOSS™ Yes

WPS Yes


Index

139

EEA

ADF (automatic document feeder) ...........29Answering machine (TAD) .......................44

connecting ............................................44Apple Macintosh

See Software User's Guide.Automatic

fax receive ............................................36Fax Detect .........................................39

B

BrotherCreativeCenter ........................................3

C

Caller ID ...................................................41Caller ID history ....................................51

Add To Phone Book ...........................51Delete ................................................51Send a fax ..........................................51

Cleaningprint head ..............................................69scanner .................................................68

Connectingexternal TAD (answering machine) .......44external telephone ................................45

Consumable items .................................137Control panel overview ..............................4ControlCenter

See Software User's Guide.Copy

paper size .............................................56paper type .............................................56tray use .................................................23using scanner glass ..............................30

Cordless telephone ..................................47Custom telephone features on a single line ...........................................................92

D

Diallinga pause ................................................ 52access codes and credit card numbers ............................................... 54Caller ID history .................................... 51manual ................................................. 49One Touch ........................................... 49Outgoing Call ....................................... 51Speed Dial ............................................ 49

Documentloading ............................................ 29, 30

E

Envelopes ............................. 17, 19, 27, 28Error messages on LCD .......................... 72

B&W Print Only .................................... 72Cannot Detect ...................................... 73Cannot Print ......................................... 73Comm. Error ......................................... 73Cover is Open ...................................... 73Data Remaining ................................... 73Document Jam ..................................... 73Ink Absorber Full .................................. 74Ink Absorber NearFull .......................... 74Ink Low ................................................. 74No Ink Cartridge ................................... 75No Paper Fed ....................................... 75Not Registered ...............................49, 75Out of Memory ..................................... 76Paper Jam ............................................ 76Unable to Clean ................................... 77Unable to Init. ....................................... 77Unable to Print ..................................... 77Unable to Scan ..................................... 77Wrong Paper Size ................................ 78Wrong Tray Setting .............................. 78

Extension telephone, using ............... 46, 47External telephone, connecting ............... 45

140

F

Fax codeschanging ...............................................48Remote Activation Code ..........39, 46, 47Remote Deactivation Code ............ 46, 47using .....................................................47

Fax Detect ................................................39Fax, from PC

See Software User's Guide.Fax, stand-alone

receiving ................................................36difficulties .................................... 90, 91F/T Ring Time, setting ........................38Fax Detect ..........................................39Fax Preview ................................ 39, 40from extension telephone ............ 46, 47Ring Delay, setting .............................38telephone line interference / VoIP ......95tray use ..............................................24

sending .................................................32change scanner glass size .................33colour fax ...........................................33difficulties ...........................................91Fax Preview .......................................34telephone line interference / VoIP ......95Transmission Verification Report .......34

Fax/Tel modeanswering at extension telephones ..................................... 46, 47Remote Activation Code ................ 46, 47Remote Deactivation Code ............ 46, 47Ring Delay ............................................38

G

Greyscale ...................................... 129, 133

H

HelpLCD messages .....................................97Menu Table ...........................................98

I

Ink cartridgesink dot counter ...................................... 66replacing ............................................... 66

Innobella™ ............................................ 137

J

Jamsdocument .............................................. 80paper .................................................... 81

L

Labels ................................... 17, 26, 27, 28LCD (Liquid Crystal Display) ................... 97

Brightness .............................................. 9

M

MacintoshSee Software User's Guide.

Maintenance, routinereplacing ink cartridges ........................ 66

Manualdialling .................................................. 49receive .................................................. 36

Manual feed slot ...................................... 17Mode, entering

Copy ....................................................... 6Fax ......................................................... 6PhotoCapture ......................................... 6Scan ....................................................... 6

Multi-line connections (PBX) ................... 45

N

NetworkPrinting

See Network User's Guide.Scanning

See Software User's Guide.

141

E

O

One touchchanging ...............................................54setting up ..............................................52using .....................................................49

Outgoing CallAdd To Phone Book ..............................51Delete ...................................................51Send a fax .............................................51

P

Paper ...................................... 25, 127, 128capacity .................................................28loading ..................................... 10, 13, 19loading envelopes and postcard ...........19printable area ........................................21size .......................................................22size of document ...................................29type .......................................... 22, 23, 27

PaperPort™12SE with OCRSee Software User's Guide. See also Help in the PaperPort™12SE application.

PhotoCapture Center™from PC

See Software User's Guide.Memory Stick PRO™ ............................57Memory Stick™ ....................................57MultiMedia Card ....................................57Preview photos .....................................60Print settings

Quality ................................................60Scan to Media

change file name ...............................61SD .........................................................57SDHC ....................................................57specifications ......................................131

Presto! PageManagerSee Software User's Guide. See also Help in the Presto! PageManager application.

Printdifficulties ..............................................88paper jams ............................................81printable area ........................................21resolution ............................................134specifications ......................................134

PrintingSee Software User's Guide.

Programming your machine .....................97

Q

Quick Dial ................................................ 52Group dial

changing ............................................ 54One Touch Dial

custom scan profile ........................... 52setting up ........................................... 52

Search .................................................. 50Speed Dial

changing ............................................ 54using .................................................. 49

R

Receive ModeExternal TAD ........................................ 36Fax Only ............................................... 36Fax/Tel ................................................. 36Manual ................................................. 36

Redial/Pause ........................................... 50Remote Setup

See Software User's Guide.Resolution

copy .................................................... 130fax ...................................................... 129print .................................................... 134scan .................................................... 133

Ring Delay, setting .................................. 38

S

Scannable area ....................................... 31Scanning

See Software User's Guide.Serial Number

how to find ...............See inside front coverSockets

EXTExternal telephone ............................ 45

Speed Dialchanging ............................................... 54setting up .............................................. 53using ..................................................... 49

142

T

TAD (telephone answering device), external ............................................. 36, 44

connecting .............................................44receive mode ........................................36recording OGM .....................................44

Telephone lineconnections ...........................................44difficulties ..............................................91interference / VoIP ................................95multi-line (PBX) .....................................45type .......................................................42

Text, entering .........................................124special characters ...............................124

Transferring your faxes or Fax Journal report ....................................79Transparencies .......... 25, 26, 28, 127, 128Tray Select key ........................................56Troubleshooting .......................................88

document jam .......................................80error messages on LCD ........................72if you are having difficulty

copying ...............................................92document jam ....................................80incoming calls ....................................92Network ..............................................94PhotoCapture Center™ .....................93printing ...............................................88printing received faxes .......................90receiving faxes ...................................91scanning .............................................92software .............................................93telephone line or connections ............91

maintenance messages on LCD ...........72paper jam ..............................................81

V

Volume, settingbeeper .....................................................9ring ..........................................................8speaker ...................................................9

W

Windows®

See Software User's Guide.Wireless Network

See Quick Setup Guide and Network User's Guide.

Visit us on the World Wide Webhttp://www.brother.com/

This machine is approved for use in the country of purchase only. Local Brother companies or theirdealers will only support machines purchased in their own countries.
