The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified. INGENIERÍA BÁSICA APROBADO ELABORADO POR: EDWIN OQUENDO FECHA: 04/11/2014 FECHA: 04/11//2014 APROBADO POR PAM EP: CARLOS GUDIÑO BASIC ENGINEERING B43 Department: Gerencia de Proyectos Document: Standard Specification For Pipe, Valves & Fittings Document Code: 43B011-CPT-50-SP-004 Revision: Date: Prepared by: Reviewed by: Approved by: 1 04-Nov-2014 E.Santillán C. Gudiño R. Silva Revision History Revision: Date: Revised Pages: Issued: A 29-Sep-2014 All For Review B 29-Oct-2014 All For HAZOP 0 31-Oct-2014 All Final Basic Engineering 1 04-Nov-2014 45,48,82-84,87-88 101-105,129,186-187 Final Basic Engineering Distribution Control Location of Document: Controlled Uncontrolled Project Management X Departmental Assistants and Coordinators X Electronic Information System X
196
Embed
Basic engineering, standart specification for pipe,valves
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
INGENIERÍA BÁSICA
APROBADO
ELABORADO POR: EDWIN OQUENDO
FECHA: 04/11/2014
FECHA: 04/11//2014
APROBADO POR PAM EP: CARLOS GUDIÑO
BASIC ENGINEERING B43
Department: Gerencia de Proyectos
Document: Standard Specification For Pipe, Valves & Fittings
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 245
3. For studbolts standard lenghts, see ANNEX No. 6 300 230
4. For ANSI Pipe Schedules, see ANNEX No. 7 400 200
5. For Hot Oil service, 1-1/2” and lower connections shall be socket welded
6. Insulating Kits shall be selected accoding to the maximum operating temperature, see ANNEX No. 3.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 21 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
A1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8,HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
A1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.
BALL All Services
A2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BALL Standard Services
A2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated, Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
A2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 22 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL
Standard Services
A2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
A2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BALL
HO PF Services
A2R 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34
6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
A2RF 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34
6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 23 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
14” and Larger Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE A4S 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A4R 2” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats,threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
CHECK A5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
A5R 4” and Larger Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 24 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE A6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
A6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BUTTER-FLY
A7RL 3” and Larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan
A7RW 3” and Larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
FULL FLOW FOOT
A8F 2” and Larger Class 125#, Cast Iron body (ASTM-A126 Gr B), FF flanged ends, bronze internals, SS strainer
APCO Flomatic Valmatic
GAUGE A9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 25 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A1”
CLASS: ANSI 150 CS, RF
SERVICE: PRODUCED GAS (LOW TEMP TO -50 °F)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24
PIPE
SCH 160 SCH 80 STD
THD, SMLS BE, SMLS
ASTM-A333 GR 6 (Note 2)
FLANGES
150# RF Flange Bore to Match Pipe Wall
THD 150# RF, WN
ASTM-A350 GR LF2
FITTINGS
3000# Wall Thickness to Match Pipe
THD BW, SMLS
ASTM-A350 GR LF2 ASTM-A420 GR WPL6
BRANCH (OLETS)
3000# SCH 80 STD
THD BW
ASTM-A350 GR LF2
VA
LV
ES
GATE A1-1SLT A1-1RLT
BALL A1-2SLT
A1-2SFLT A1-2RLT, A1-2RFLT
PLUG N/A
GLOBE A1-4SLT A1-4RLT
CHECK N/A A1-5RLT
A1-5RPLT A1-5RLT, A1-5RPLT
A1-5RWLT A1-5RLT, A1-5RWLT
NEEDLE A1-6SLT N/A
BUTTERFLY N/A A1-7RLLT, A1-7RWLT
GAUGE A1-9SLT N/A
BOLTING (Note 3)
Bolts: ASTM-A320 GR L7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 4, Fluorocarbon Coated Heavy Hex Nuts
GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – only USA. Carrara Style SWC - only ITALY)
2. MTRs and CTRs for low temperature material and certification tests are required per ASME B31.3
250 245
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 26 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
A1-1SLT
¾” and Smaller Class 800# (1975# CWP), FS body (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, grafoil packing, threaded ends per ASME B1.20.1, bolted body construction, OS&Y, solid wedge. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A1-1RLT
1” – 4” Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Hand wheel operated. Design per API 600. Test per API 598
6” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Gear operated. Design per API 600. Test per API 598.
BALL A1-2SLT
¾” and Smaller 1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, reduced port. Fire safe per API 607. Design per API 608. Test per API 598
¾” and Smaller 1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, full port. Fire safe per API 607. Design per API 608. Test per API 598
A1-2RLT
1” - 6” Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 27 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL A1-2RFLT
1” - 6” Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34
8” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
8” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
GLOBE A1-4SLT 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A1-4RLT 2” and 8” Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 28 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK A1-5RLT 1” - 3” Class 150#, CS body (ASTM-A352 Gr LCC) , Trim 12, HF Stellite® seats, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Design per API 594. Test per API 598
A1-5RLT 4” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Body drain ½” NPT. Design per API 594. Test per API 598
CHECK A1-5RPLT 1” - 1 ½” Class 150#, FS body (ASTM-350 Gr LF2), 316 SS piston and spring, integral 13% chrome to hard faced seat, RF flanged ends per ASME B16.5, threaded or bolted bonnet. Test per API 598
Bonney Forge DSI Smith Vogt
A1-5RPLT 2” - 8” Class 150#, CS body (ASTM-A352 Gr LCC), 316 SS piston and spring, soft seals, RF flanged ends per ASME B16.5, bolted bonnet. Fire safe bonnet. Test per API 598
KF Eagle Norriseal Tom Wheatley
A1-5RWLT 2” - 24” Class 150#, CS body and cover (ASTM-A352 Gr LCC), 316 SS disc and springs, soft seat, wafer body design or full threaded lugged body. Test per API 598
Crane KF Eagle Tom Wheatley Wheatley
NEEDLE A1-6SLT 1” and Smaller 6000# CWP, bar stock body (316 SS), Teflon packing, soft or hard seat material, low temperature “arctic” lube, M x FM threaded ends per ASME B1.20.1. Design MSS SP-105
AGCO Balon KF NOSHOK Swagelok
BUTTER-FLY
A1-7RLLT 3” and Larger Class 150#, high performance type, low
temp CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598
Keystone Posi-Seal Velan
WKM
BUTTER-FLY
A1-7RWLT 3” and Larger Class 150#, high performance type, low
temp CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598
Keystone Posi-Seal Velan WKM
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 29 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GAUGE A1-9SLT
3/4” and Smaller
6000# CWP, bar stock body (316 SS), Teflon packing, delrin seat material, low temperature “arctic” lube, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 30 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
2. This specification will be used Only for replacement in existing systems 250 245
3. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged
4. Flanges shall be used in lieu of unions
5. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159
6. Valves for corrosive applications should be supplied with the appropriate internal valve coating and trim, and it could be Plasite 7159 or Enduro Bond
7. For studbolts standard lenghts, see ANNEX No. 6
8. For ANSI Pipe Schedules, see ANNEX No. 7
9. For Internal Coating Specifications, see ANNEX No. 8
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 31 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
A2-1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A2-1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598
Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598.
BALL A2-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
A2-2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
A2-2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 32 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL A2-2R 8” and Larger
Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE A2-4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A2-4R 2” and Larger
Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 33 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK A2-5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE A2-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
A2-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE A2-9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 34 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A3”
CLASS: ANSI 150# SS, RF
SERVICE: PRODUCED GAS (LOW TEMP TO -50 °F)
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
PIPE
SCH 80S SCH 40S
THD (Note 3)/PE, SMLS BE, SMLS
ASTM-A312 TP 304
FLANGES
150# RF Flange Bore to Match Pipe Wall
SW 150# RF, WN
ASTM-A182 F 304
FITTINGS
3000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A182 F 304 ASTM-A403 WP 304
BRANCH (OLETS)
3000# SCH 40S
SW BW
ASTM-A182 F 304
VA
LV
ES
GATE A3-1S A3-1R
BALL A3-2R, A3-2RF
PLUG N/A
GLOBE N/A A3-4R N/A
CHECK N/A A3-5R, A3-5RP, A3-5RW A3-5R, A3-5RW
NEEDLE A3-6S N/A
BUTTERFLY N/A A3-7RL, A3-7RW
GAUGE A3-9S N/A
BOLTING (Note 4)
Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts
GASKETS
150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
2. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material 3. Threaded valves are allowed on instruments, vents and drains
250 217
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 35 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
A3-1S
1 ½” and Smaller
Class 800#, SS body (ASTM-A182 F316), Trim 12, HF Stellite® seats, graphite packing, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge. Hand wheel operated. Design per API 602. Test per API 598. -50 ºF design
Bonney Forge DHV DSI Newco Smith Velan Vogt
A3-1R
2” – 4” Class 150#, 316 SS body, Trim 12, HF Stellite® seats, graphite packing, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge. Hand wheel operated. Design per API 600. Test per API 598. -50 ºF design
6” and Larger Class 150#, 316 SS body, Trim 12, HF Stellite® seats, graphite packing, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge. Gear operated. Design per API 600. Test per API 598. -50 ºF design.
BALL A3-2R
½” - 6” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598. -50 ºF design
½” – 6” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598. -50 ºF design
A3-2R
8” - 10” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design
A3-2RF
8” - 10” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 36 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL A3-2R 12” - 24” Class 150#, 316 SS body and ball, SS 17-4 PH stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design
A3-2RF 12” - 24” Class 150#, 316 SS body and ball, SS 17-4 PH stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design
GLOBE A3-4R 2” - 8” Class 150#, 316 SS body, Trim 12, HF Stellite® seats, graphite packing, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598. -50 ºF design
CHECK A3-5R 2” – 3” Class 150#, 316 SS body, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, bolted cap, swing check, horizontal or vertical service. Design per API 594. Test per API 598. -50 ºF design
A3-5R 4” and Larger Class 150#, 316 SS body, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, bolted cap, swing check, horizontal or vertical service. Body drain ½” NPT. Design per API 594. Test per API 598. -50 ºF design
A3-5RP 2” - 8” Class 150#, 316 SS body, piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598. -50 ºF design
KF Eagle Norriseal Tom Wheatley
A3-5RW 2” and Larger Class 150#, 316 SS body and plate, disc and spring, soft seat, wafer body design or full threaded lugged body. Test per API 598. -50 ºF design
Crane KF Eagle Tom Wheatley Wheatley
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 37 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE A3-6S 1” and Smaller
6000# CWP, bar stock body (316 SS), Teflon packing, soft or hard seat material, low temperature “arctic” lube, M x FM threaded ends per ASME B1.20.1. Design MSS SP-105
AGCO Balon KF NOSHOK Swagelok
BUTTER-FLY
A3-7RL
3” and Larger
Class 150#, 316 SS body and disc, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598. -50 ºF design
Bray Center Line Demco Flowseal Keystone KF Norris Quadrant Velan
A3-7RW
3” and Larger
Class 150#, 316 SS body and disc, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598. -50 ºF design
GAUGE A3-9S 3/4” and Smaller
6000# CWP, bar stock body (316 SS), Teflon packing, delrin seat material, low temperature “arctic” lube, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 38 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
CLASS: ANSI 150# CS, RF
SERVICE: PRODUCED GAS (CORROSIVE SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24
PIPE
SCH 160 SCH 80 STD
THD/PE BE, SMLS / ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
FLANGES
150# RF Flange Bore to Match Pipe Wall
THD/SW 150# RF/FF, WN
ASTM-A105
FITTINGS
3000# Wall Thickness to Match Pipe
THD/SW BW, SMLS
ASTM-A105 ASTM-A234 GR WPB
BRANCH (OLETS)
3000# SCH 80 STD
THD/SW BW
ASTM-A105
VA
LV
ES
GATE A4-1S, A4-1Z, A4-1R A4-1R
BALL A4-2S, A4-2SF, A4-2Z
A4-2ZF, A4-2R, A4-2RF A4-2R, A4-2RF
PLUG N/A
GLOBE A4-4S, A4-4Z, A4-4R A4-4R
CHECK A4-5S, A4-5Z, A4-5R A4-5R
NEEDLE A4-6S, A4-6SFM N/A
BUTTERFLY N/A A4-7RL, A4-7RW
FOOT N/A
GAUGE A4-9S N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
GASKETS
150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer & inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY) 150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder (Flexitallic, Lamons, Garlock - USA ONLY)
2. Threaded fittings and valves are allowed on instruments, vents and drains 250 245
3. Corrosion Allowance = 1/8”
4. Valves elastomers in contact with process fluids shall be suitable for exposure to wet Carbon Dioxide.
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 39 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
A4-1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), threaded ends per ASME B1.20.1, OS&Y, Trim 8, bolted bonnet, solid wedge gate, HF Stellite® seats. Hand wheel operated. WT per API 602. Test per API 598.
Bonney Forge DHV DSI Newco Smith Velan Vogt
A4-1Z 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), socket weld ends per ASME B16.11, OS&Y, Trim 8, bolted bonnet, solid wedge gate, and HF Stellite® seats. Hand wheel operated. WT per API 602. Test per API 598
A4-1R 1 ½” and Smaller
Class 150#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 602. Test per API 598
A4-1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
A4-1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.
BALL A4-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 40 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL All Services
A4-2SF 1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598
A4-2R 1 ½” and Smaller
Class 150#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598
AOP KF MTS Nibco Nutron PBV Quadrant WKM
A4-2RF 1 ½” and Smaller
Class 150#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598
BALL Standard Services
A4-2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598, or ASME 16.34
A4-2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 41 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL Standard Services
A4-2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
A4-2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BALL HO PF Services
A4-2R 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34
6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
A4-2RF 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34
AOP Balon Cameron DHV Grove KF
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 42 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
MTS Nibco Nutron PBV Quadrant TK Velan WKM
14” and Larger
Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE A4-4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A4-4Z
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
A4-4R 1 ½” and Smaller
Class 150#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DSI Newco Smith Velan Vogt
A4-4R 2” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 43 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK A4-5S
1 ½” and Smaller
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
A4-5R 1 ½” and Smaller
Class 150#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 602. Test per API 598
A4-5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
A4-5R 4” and Larger Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE A4-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
A4-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 44 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BUTTER-FLY
A4-7RL 3” and larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant
A4-7RW 3” and larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
GAUGE A4-9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 45 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
2. This specification will be used Only for new systems
3. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged
4. For studbolts standard lenghts, see ANNEX No. 6
5. For ANSI Pipe Schedules, see ANNEX No. 7
6. Corrosion Allowance = 1/8”
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 46 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
A5-1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A5-1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 12. , HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
A5-1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 12. , HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.
BALL A5-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
A5-2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
A5-2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 47 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL A5-2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
A5-2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE A5-4S
1 ½” and Smaller
Class 800#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
A5-4R 2” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 48 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “A5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK A5-5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE A5-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
A5-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BUTTER-FLY
A5-7RL 3” and larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant A5-7RW 3” and larger Class 150#, CS body (ASTM-A216 Gr
WCB), SS stem and disc, 17-4 PH shaft, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
GAUGE A5-9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 49 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “BS”
CLASS: ANSI 150# SS, RF
SERVICE: PROCESS LIQUIDS / SWEET PROCESS HYDROCARBONS
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
PIPE
SCH 40S SCH 10S
THD (Note 3)/PE, SMLS BE, SMLS
ASTM-A312 TP 304L
FLANGES
150# RF Flange Bore to Match Pipe Wall
SW 150# RF, WN
ASTM-A182 F 304L
FITTINGS
3000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A182 F 304L ASTM-A403 WP 304L
BRANCH (OLETS)
3000# SCH 10S
SW BW
ASTM-A182 F 304L
VA
LV
ES
GATE BS-1S, BS-1Z BS-1R
BALL BS-2S, BS-2SF BS-2Z, BS-2ZF
BS-2R, BS-2RF
PLUG N/A
GLOBE BS-4S, BS-4Z BS-4R
CHECK BS-5S, BS-5Z BS-5R
NEEDLE BS-6S N/A
BUTTERFLY N/A BS-7RL, BS-7RW
GAUGE BS-9S N/A
BOLTING (Note 4)
Bolts: ASTM-A193 GR B8 Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 8 Heavy Hex Nuts
GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
2. Wall thicknesses are based on allowable stresses per ASME B31.3 for 316 SS material 250 185
3. Use pipe threaded only for valves connections
4. For studbolts standard lenghts, see ANNEX No. 6
5. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 50 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “BS”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
BS-1S
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
BS-1Z
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
BS-1R 2” - 4” Class 150#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598
BS-1R 6” and Larger Class 150#, 316 SS body and bonnet, Trim 12, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598.
BALL BS-2S
1 ½” and Smaller
1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
BS-2SF
1 ½” and Smaller
1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 51 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “BS”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL BS-2ZF
1 ½” and Smaller
1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BS-2R 2” – 6” Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
BS-2RF 2” – 6” Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
BS-2R 8” and Larger Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BS-2RF 8” and Larger Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 52 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “BS”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GLOBE
BS-4S
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
BS-4Z
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
BS-4R 2” and Larger Class 150#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), SS body and cover (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
Class 800# (1975# CWP), SS body and cover (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, socket ends per ASME B16.11, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
BS-5R 2” - 3” Class 150#, 316 SS body and cover, Trim 12, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
BS-5R 4” and Larger Class 150#, 316 SS body and cover, Trim 12, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 53 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “BS”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE BS-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
BUTTER-FLY
BS-7RL 3” and Larger Class 150#, 316 SS body, stem and disc, Viton seat, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant
BS-7RW 3” and Larger Class 150#, 316 SS body, stem and disc, Viton seat, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Test per API 598
GAUGE BS-9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 54 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B”
CLASS: ANSI 300# CS, RF
SERVICE: SWEET PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 667
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 55 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
B1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B1Z 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socked weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
B1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
B1R 6” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.
BALL B2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
B2SF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 56 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL
B2ZF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598
B2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
B2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608.Test per API 598 or ASME 16.34
B2R 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
B2RF 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE B4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 57 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GLOBE B4Z
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B4R 2” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats ,socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
B5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
B5R 4” and Larger Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 58 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE B6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
B6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BUTTER-FLY
B7RL 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan
B7RW 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
GAUGE B9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 59 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B1”
CLASS: ANSI 300# CS, RF
SERVICE: PRODUCED GAS (LOW TEMP TO -50 °F)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 20 24
PIPE
SCH 160 SCH 80 STD XH SCH 40
THD/PE, SMLS BE, SMLS
ASTM-A333 GR 6 (Note 2)
FLANGES
300# RF Flange Bore to Match Pipe Wall
THD/SW 300# RF, WN
ASTM-A350 GR LF2
FITTINGS
3000# Wall Thickness to Match Pipe
SW/THD BW, SMLS
ASTM-A350 GR LF2 ASTM-A420 GR WPL6
BRANCH (OLETS)
3000# SCH 80 STD XH SCH 40
THD/SW BW
ASTM-A350 GR LF2
VA
LV
ES
GATE B1-1SLT B1-1RLT
BALL B1-2SLT
B1-2SFLT B1-2RLT, B1-2RFLT
PLUG N/A
GLOBE B1-4SLT B1-4RLT
CHECK N/A B1-5RLT
B1-5RPLT B1-5RLT, B1-5RPLT
B1-5RWLT B1-5RLT, B1-5RWLT
NEEDLE B1-6SLT N/A
BUTTERFLY N/A B1-7RLLT, B1-7RWLT
GAUGE B1-9SLT N/A
BOLTING (Note 3)
Bolts: ASTM-A320 GR L7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 4, Fluorocarbon Coated Heavy Hex Nuts
GASKETS 300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
2. MTRs and CTRs for low temperature material and certification tests are required per ASME B31.3
250 667
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 60 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
B1-1SLT
¾” and Smaller
Class 800# (1975# CWP), FS body (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, grafoil packing, threaded ends per ASME B1.20.1, bolted body construction, OS&Y, solid wedge. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B1-1RLT
1” – 4” Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Hand wheel operated. Design per API 600. Test per API 598
Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Gear operated. Design per API 600. Test per API 598.
BALL B1-2SLT
¾” and Smaller
1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, reduced port. Fire safe per API 607. Design per API 608. Test per API 598
1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, full port. Fire safe per API 607. Design per API 608. Test per API 598
B1-2RLT
1” - 3” Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34
1” - 3” Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 61 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL B1-2RLT
4” and Larger
Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
GLOBE B1-4SLT 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B1-4RLT 2” and Larger
Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y. Hand wheel operated. Design per API 600. Test per API 598
CHECK B1-5RLT 1” - 3” Class 300#, CS body (ASTM-A352 Gr LCC) , Trim 12, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Design per API 594. Test per API 598
Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Body drain ½” NPT. Design per API 594. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 62 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK B1-5RPLT
1” - 1 ½” Class 300#, FS body (ASTM-350 Gr LF2), 316 SS piston and spring, integral 13% chrome to hard faced seat, RF flanged ends per ASME B16.5, threaded or bolted bonnet. Test per API 598
Bonney Forge DHV DSI Smith Vogt
B1-5RPLT
2” - 8” Class 300#, CS body (ASTM-A352 Gr LCC), 316 SS piston and spring, soft seals, RF flanged ends per ASME B16.5, bolted bonnet. Fire safe bonnet. Test per API 598
DHV KF Eagle Norriseal Tom Wheatley
B1-5RWLT
2” - 24” Class 300#, CS body and cover (ASTM-A352 Gr LCC), 316 SS disc and springs, soft seat, wafer body design or full threaded lugged body. Test per API 598
Crane KF Eagle Tom Wheatley Wheatley
NEEDLE B1-6SLT 1” and Smaller
6000# CWP, bar stock body (316 SS), Teflon packing, soft or hard seat material, low temperature “arctic” lube, M x FM threaded ends per ASME B1.20.1. Design MSS SP-105
AGCO Balon KF NOSHOK Swagelok
BUTTER-FLY B1-7RLLT
3” and Larger
Class 300#, high performance type, low temp
CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598
Keystone Posi-Seal Velan WKM
B1-7RWLT
3” and Larger
Class 300#, high performance type, low temp
CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598
GAUGE B1-9SLT
3/4” and Smaller
6000# CWP, bar stock body (316 SS), Teflon packing, delrin seat material, low temperature “arctic” lube, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 63 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B3”
CLASS: ANSI 300# SS, RF
SERVICE: PRODUCED GAS (WET OR CONDENSATE SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10
PIPE
SCH 80S SCH 40S
THD (Note 4)/PE, SMLS BE, SMLS
ASTM-A312 TP 304
FLANGES
300# RF Flange Bore to Match Pipe Wall
SW 300# RF, WN
ASTM-A182 F 304
FITTINGS
3000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A182 F 304 ASTM-A403 WP 304
BRANCH (OLETS)
3000# SCH 40S
SW BW
ASTM-A182 F 304
VA
LV
ES
GATE B3-1S, B3-1Z B3-1R
BALL B3-2R, B3-2RF
PLUG N/A
GLOBE B3-4R
CHECK N/A B3-5R, B3-5RP
NEEDLE B3-6S, B3-6SFM N/A
BUTTERFLY N/A
GAUGE B3-9S N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions
per ASME B16.5 Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts
GASKETS 300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY)
2. Valve elastomers in contact with process fluids shall be suitable for exposure to Hydrogen Sulfide, Carbon Dioxide and Aromatics
250 570
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
4. Use pipe threaded only for valves connections
5. For Bolts dimensions see, ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 64 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
B3-1S
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B3-1Z
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
B3-1R 2” - 4” Class 300#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598
B3-1R 6” and Larger Class 300#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598.
BALL B3-2R
½” - 3” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34
B3-2RF ½” - 3” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 65 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL B3-2R
4” - 10” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
B3-2RF 4” - 10” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
GLOBE B3-4R
½” - 10” Class 300#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600/602. Test per API 598
CHECK B3-5R 2” - 3” Class 300#, 316 SS body and cover, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
B3-5R 4” and Larger Class 300#, 316 SS body, and cover, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
B3-5RP 2” - 10” Class 300#, 316 SS body, piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598
KF Eagle Norriseal Tom Wheatley
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 66 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE B3-6S 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
B3-6SFM 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE B3-9S ¾” and Smaller
4000 PSI @ 500 F, bar stock body (316 SS), Teflon packing, metal seat, one male and three female, needle port. Complete with bleeder valve and 316 SS plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 67 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B4”
CLASS: ANSI 300# CS, RF
SERVICE: PRODUCED GAS (CORROSIVE SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 18 20 24
PIPE
SCH XXS SCH 160 SCH 80 SCH 40 XS SCH 40
THD/PE BE, SMLS/ ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
FLANGES
300# RF Flange Bore to Match Pipe Wall
THD/SW 300# RF, WN
ASTM-A105
FITTINGS
3000# Wall Thickness to Match Pipe
THD/SW BW, SMLS
ASTM-A105 ASTM-A234 GR WPB
BRANCH (OLETS)
3000# SCH 80 SCH 40 XS SCH 40
THD/SW BW
ASTM-A105
VA
LV
ES
GATE B4-1S, B4-1Z, B4-1R B4-1R
BALL B4-2S, B4-2SF, B4-2Z
B4-2ZF, B4-2R, B4-2RF B4-2R, B4-2RF
PLUG N/A
GLOBE B4-4S, B4-4Z, B4-4R B4-4R
CHECK B4-5S, B4-5Z, B4-5R B4-5R, B4-5RP
NEEDLE B4-6S, B4-
6SFM N/A
BUTTERFLY N/A B4-7RL, B4-7RW
GAUGE B4-9S N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
GASKETS 300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY)
2. Threaded fittings and valves are allowed on instruments, vents and drains 250 667
3. Corrosion Allowance = 1/8”
4. Valves elastomers in contact with process fluids shall be suitable for exposure to wet Carbon Dioxide.
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 68 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
B4-1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B4-1Z 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socked weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
B4-1R 1 ½” and Smaller
Class 300#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats , RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 602. Test per API 598
B4-1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598
BALL B4-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 69 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL B4-2SF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598
B4-2R 1 ½” and Smaller
Class 300#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598
AOP KF MTS Nibco Nutron PBV Quadrant Velan WKM
B4-2RF 1 ½” and Smaller
Class 300#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598
B4-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
B4-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
B4-2R 4” and Larger
Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 70 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL B4-2RF 4” and Larger
Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt B4-4Z
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
B4-4R 1 ½” and Smaller
Class 300#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DSI Newco Smith Velan Vogt
B4-4R 2” and Larger
Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 71 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK
B4-5S
1 ½” and Smaller
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8 HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
B4-5R 1 ½” and Smaller
Class 300#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 602. Test per API 598
B4-5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
B4-5RP 2” - 10” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), 316 SS piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598
KF Eagle Norriseal Tom Wheatley
NEEDLE B4-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
B4-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 72 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BUTTER-
FLY
B4-7RL 3” and Larger
Class 300#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan
B4-7RW 3” and Larger
Class 300#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
GAUGE B4-9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 73 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B5”
CLASS: ANSI 300# CS, RF
SERVICE: PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 667
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
5. Corrosion Allowance = 1/8”
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 74 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
B5-1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B5-1Z 1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socked weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
B5-1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
B5-1R 6” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.
BALL B5-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A-105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
B5-2SF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 75 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL
B5-2ZF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598
B5-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
B5-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608.Test per API 598 or ASME 16.34
B5-2R 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
B5-2RF 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE B5-4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105),Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 76 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GLOBE B5-4Z
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
B5-4R 2” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats ,socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
B5-5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
B5-5R 4” and Larger Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 77 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “B5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE B5-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
B5-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BUTTER-FLY
B5-7RL 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan
B5-7RW 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
GAUGE B5-9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 78 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
2. This specification will be used Only for replacement in existing systems 250 667
3. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged
4. Flanges shall be used in lieu of unions
5. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159
6. Valves for corrosive applications should be supplied with the appropriate internal valve coating and trim, and it could be Plasite 7159 or Enduro Bond
7. For studbolts standard lenghts, see ANNEX No. 6
8. For ANSI Pipe Schedules, see ANNEX No. 7
9. For Internal Coating Specifications, see ANNEX No. 8
10. For underground lines from well head to manifold shall be SCH 80 (no internally coated)
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 79 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
C1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
C1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598
Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth C1R 6” and Larger Class 300#, CS body and bonnet (ASTM-
A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598
C1RSG 2” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, RF flanged ends per ASME B16.5, full port, through-conduit, bolted bonnet, rising stem, nonrising hand wheel, slab gate with floating seats for corrosive service. Fire tested API 6FA. Hand wheel or gear (6” and larger) operated. Design and test per API 6D
M&J Foster WKM
BALL C2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 80 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL C2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB
or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
C2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
C2R 4” and Larger
Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE C4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
C4R 2” and Larger
Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 81 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK C5S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
C5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE C6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
C6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE C9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 82 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C1”
CLASS: ANSI 300# CS, RF
SERVICE: PROCESS FLUID (ASME B31.4)
SIZE 2 4 6 8 10 12 16 18 20 24 30
PIPE
SCH.80 0.438” WT 0.5” WT
ASTM A-106-B API-5L GR X65, FBE EXTERNAL COATING (BURIED PIPE)
BE, SMLS
FLANGES
SCH.80 0.438” WT 0.5” WT
ASTM A-105 ASTM-A694 F65
300# RF, WN
ANCHOR FLANGES
N/A
0.438” WT 0.5” WT
ASTM-A694 F65
300# RF, WN
Design Code ASME B31.4, Temperature Differential per specific application, 1500 psi as standard Design concrete bearing stress
FITTINGS
SCH.80 0.438” WT 0.5” WT
ASME B16.9 FITTINGS
PIPE BENDS
ASTM A-234 WPB API-5L GR X65, FBE EXTERNAL COATING
BRANCH (BARRED TEE)
N/A
0.438” WT 0.5” WT
BW
ASTM A-860 WPHY 65, FBE EXTERNAL COATING
VA
LV
ES
BALL C1-2R C1-2RF
CHECK N/A C1-5R
BOLTING (Note 4)
Bolts: ASTM-A193 GR B7 Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H Fluorocarbon Coated Heavy Hex Nuts
GASKETS 300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY)
3. Pipe welding joints shall have a hardness in the "HAZ" not higher than 22 HRC.
4. Pipeline shall be underground installed unless otherwise is defined in the detail engineering.
5. Corrosion allowance = 1/8”
6. Minimum thickness for internal pressure only, structural minimum required thickness shall be evaluated on the basis of pipeline stress analysis, ASME code compliance and other applicable.
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 83 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL
C1-2R
2” – 4”
Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Class 300#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
C1-2RF 8” – 10” MLVs
ANSI Class 300, Welded End Connections, Full Port, Fully Welded Body with Rigid Trunnion Supported Ball, ASTM A350 LF2 Body, ASTM A350 LF2 – 1 to 3 mil ENP Ball/Trim & Seat, Welded End wall thickness matching pipeline WT, NACE II Bolting; Peek Seats, shall conform with API 6D and ISO 14313, shall comply with standards ANSI B16.5 and B16.10, MR-01-75/ ISO 15156 (when applicable), Fire-safe sealing according to API 607, 6FA, and ISO 10497, Independent floating spring loaded seats for tight seal at low differential pressures. Double piston effect seat design, Double block & bleed design, stem and seat lube and sealant injection fittings with internal check valves, double sealing on stem and bonnet. Tested by API 598. Shall include: Stem Extension (length according to specific datasheet), Two coats of Fenolic Coating, and Two Transition pipe pieces API-5L X65.
Cameron KF
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 84 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
C1-2RF
MLVs
12” – 30”
ANSI Class 300, Welded End Connections, Full Port, Fully Welded Body with Rigid Trunnion Supported Ball, ASTM A350 LF2 Body, ASTM A350 LF2 – 1 to 3 mil ENP Ball/Trim & Seat, Welded End wall thickness matching pipeline WT, NACE II Bolting; Peek Seats, shall conform with API 6D and ISO 14313, shall comply with standards ANSI B16.5 and B16.10, MR-01-75/ ISO 15156 (when applicable), Fire-safe sealing according to API 607, 6FA, and ISO 10497, Independent floating spring loaded seats for tight seal at low differential pressures. Double piston effect seat design, Double block & bleed design, stem and seat lube and sealant injection fittings with internal check valves, double sealing on stem and bonnet. Tested by API 598. Shall include: Stem Extension (length according to specific datasheet), Two coats of Fenolic Coating, and Two Transition pipe pieces API-5L X65.
CHECK C1-5R 10” – 30”
Class 300#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598.
Cameron Tom Wheatley KF
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 85 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C2”
CLASS: ANSI 300# CS, RF
SERVICE: CORROSIVE PRODUCED OIL / WATER (PRODUCTION WELL PADS AND INLET PLANT)
2. This specification will be used Only for new systems 250 667
3. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged
4. For studbolts standard lenghts, see ANNEX No. 6
5. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 86 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
C2-1S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
C2-1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
C2-1R 6” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats. RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598
BALL All Services
C2-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BALL Standard Services
C2-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
C2-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 87 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL Standard Services
C2-2R 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
C2-2RF 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BALL HO PF Services
C2-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
4” – 12” Class 300#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 300#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
C2-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
4” – 12” Class 300#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 88 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
14” and Larger Class 300#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE C2-4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
C2-4R 2” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
C2-5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
C2-5R 4” and Larger Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 89 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “C2”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE C2-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
C2-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE C2-9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 90 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D”
CLASS: ANSI 600# CS, RF
SERVICE: SWEET PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
PIPE
SCH 160 SCH 80
THD BE, SMLS/ ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
FLANGES
600# RF Flange Bore to Match Pipe Wall
THD 600# RF, WN
ASTM-A105
FITTINGS
6000# 3000# Wall Thickness to Match Pipe
THD BW, SMLS
ASTM-A105 ASTM-A234 GR WPB
BRANCH (OLETS)
6000# 3000# SCH 80
THD BW
ASTM-A105
VA
LV
ES
GATE D1S D1R
BALL D2S, D2SF D2R, D2RF
PLUG N/A
GLOBE D4S D4R
CHECK D5S D5R
NEEDLE D6S, D6SFM N/A
BUTTERFLY N/A
GAUGE D9S N/A
BOLTING (Note 3)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5
Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
GASKETS 600# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 1335
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 91 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
D1S
1 ½” and Smaller
Class 800# (1975# CWP), CS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
D1R 4” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598
BALL
All Services
D2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BALL Standard Services
D2R 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 92 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL Standard Services
D2RF 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
D2R 2” – 4” Class 600#, FS body (ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
6”-12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
D2RF 2” – 4” Class 600#, FS body (ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
AOP Balon Cameron DHV Grove KF MTS Nibco Nutron
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 93 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
6”-12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
PBV Quadrant TK Velan WKM
14” and larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE D4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 94 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK D5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
D5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE D6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
D6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE D9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 95 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D1”
CLASS: ANSI 600# CS, RF
SERVICE: CORROSIVE PRODUCED OIL / WATER
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
PIPE
SCH 160 SCH 80
THRD BE, SMLS/ ERW-HFI
ASTM-A106 GR B, GALV ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)
2. This specification shall be used Only for replacement of existing systems 250 1335
3. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged
4. Flanges shall be used in lieu of unions
5. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159
6. Valves for corrosive applications should be supplied with the appropriate internal valve coating and trim, and it could be Plasite 7159 or Enduro Bond
7. For studbolts standard lenghts, see ANNEX No. 6
8. For ANSI Pipe Schedules, see ANNEX No. 7
9. For Internal Coating Specifications, see ANNEX No. 8
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 96 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
D1-1S
1 ½” and Smaller
Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, graphite packing, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D1-1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598
Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth D1-1R 4” and Larger Class 600#, CS body and bonnet (ASTM-
A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598
D1-1RSG 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, RF flanged ends per ASME B16.5, full port, through-conduit, bolted bonnet, rising stem, nonrising hand wheel, slab gate with floating seats for corrosive service. Fire tested API 6FA. Hand wheel or gear (4” and larger) operated. Design and test per API 6D
M&J Foster WKM
BALL D1-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 97 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL D1-2R 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
D1-2RF 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE D1-4S
1 ½” and Smaller
Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D1-4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 98 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D1”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK D1-5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
D1-5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE D1-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
D1-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE D1-9S 3/4” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 99 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D3”
CLASS: ANSI 600# SS, RF
SERVICE: PRODUCED GAS (WET OR CONDENSATE SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10
PIPE
SCH 80S SCH 40S SCH 80S
THD (Note 4)/PE, SMLS BE, SMLS
ASTM-A312 TP 304
FLANGES
600# RF Flange Bore to Match Pipe Wall
SW 600# RF, WN
ASTM-A182 F 304
FITTINGS
3000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A182 F 304 ASTM-A403 WP 304
BRANCH (OLETS)
3000# SCH 40S SCH 80S
SW BW
ASTM-A182 F 304
VA
LV
ES
GATE D3-1S, D3-1Z N/A
BALL N/A D3-2R, D3-2RF
PLUG N/A
GLOBE D3-4R
CHECK N/A D3-5R, D3-5RP
NEEDLE D3-6S, D3-6SFM N/A
BUTTERFLY N/A
GAUGE D3-9S N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts
GASKETS 600# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
PRESS./TEMP. RATINGS °F PSIG REF. ASME B16.5
NOTES: -20/100 1440
1. Maximum design conditions: 250 °F - 1137 PSIG (Group 2.1) 2. Valve elastomers in contact with process fluids shall be suitable for exposure to Hydrogen Sulfide, Carbon Dioxide and Aromatics
200 1200
250 1137
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 100 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
D3-1S
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D3-1Z
1 ½” and Smaller
Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
BALL
D3-2R 2” and Larger Class 600#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
D3-2RF 2” and Larger Class 600#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
GLOBE
D3-4R
2” and Larger Class 600#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
D3-5R 4” and Larger Class 600#, 316 SS body and cover, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
D3-5RP 2” and Larger Class 600#, 316 SS body, piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598
KF Eagle Norriseal Tom Wheatley
NEEDLE
D3-6S 1” and
Smaller 2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
D3-6SFM 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE
D3-9S ¾” and Smaller
4000 PSI @ 500 F, bar stock body (316 SS), Teflon packing, metal seat, one male and three female, needle port. Complete with bleeder valve and 316 SS plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 102 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 1335
3. Pipe welding joints shall have a hardness in the "HAZ" not higher than 22 HRC.
4. Pipeline shall be underground installed unless otherwise is defined in the detail engineering.
5. Corrosion Allowance = 1/8”
6. Minimum thickness for internal pressure only, structural minimum required thickness shall be evaluated on the basis of pipeline stress analysis, ASME code compliance and other applicable.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 103 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
D5-1S
1 ½” and Smaller
Class 800# (1975# CWP), CS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D5-1Z
1 ½” and Smaller
Class 800# (1975# CWP), CS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socket welded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
D5-1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
D5-1R 4” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598
BALL D5-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled teflon seats, socket welded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
D5-2SF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
D5-2ZF
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled teflon seats, socket welded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 104 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
D5-2R 2” – 4” Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
6” – 12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BALL D5-2RF 2” – 4” Class 600#, CS body (ASTM-A216 Gr
WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
6” – 12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 105 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
MLVs ANSI Class 600, Welded End Connections, Full Port, Fully Welded Body with Rigid Trunnion Supported Ball, ASTM A350 LF2 Body, ASTM A350 LF2 – 1 to 3 mil ENP Ball/Trim & Seat, welded ends, wall thickness matching pipeline WT, NACE II Bolting; Peek Seats, shall conform with API 6D and ISO 14313, shall comply with standards ANSI B16.5 and B16.10, MR-01-75/ ISO 15156 (when applicable), Fire-safe sealing according to API 607, 6FA, and ISO 10497, Independent floating spring loaded seats for tight seal at low differential pressures. Double piston effect seat design, Double block & bleed design, stem and seat lube and sealant injection fittings with internal check valves, double sealing on stem and bonnet.Tested by API 598. Shall include: Stem Extension (length according to specific datasheet), Two coats of Fenolic Coating, and Two Transition pipe pieces API-5L X65.
Cameron
KF
GLOBE D5-4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D5-4Z
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket welded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
D5-4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
AOP Balon Bonney Forge DHV DSI KF Eagle
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 106 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
D6-5Z
1 ½” and Smaller
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, socket welded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Newco Tom Wheatley Velan Vogt Wheatley
D6-5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
D6-5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE D6-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
D6-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE D6-9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 107 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D6”
CLASS: ANSI 600# CS, RF
SERVICE: PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 18 20 24
PIPE
SCH XXS SCH 160
SCH 80
THD BE, SMLS/ ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
FLANGES
600# RF Flange Bore to Match Pipe Wall
THD 600# RF, WN
ASTM-A105
FITTINGS
6000# 3000# Wall Thickness to Match Pipe
THD BW, SMLS
ASTM-A105 ASTM-A234 GR WPB
BRANCH (OLETS)
6000# 3000# SCH 160
SCH 80
THD BW
ASTM-A105
VA
LV
ES
GATE D6-1S D6-1R
BALL D6-2S, D6-2SF D6-2R, D6-2RF
PLUG N/A
GLOBE D6-4S D6-4R
CHECK D6S D6R
NEEDLE D6-6S, D6-6SFM N/A
BUTTERFLY N/A
GAUGE D6-9S N/A
BOLTING (Note 3)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per
ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
GASKETS 600# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 1335
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
5. Corrosion Allowance = 1/8”
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 108 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D6”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
D6-1S
1 ½” and Smaller
Class 800# (1975# CWP), CS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
D6-1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth D6-1R 4” and Larger Class 600#, CS body and bonnet (ASTM-
A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598
BALL
D6-2S
1 ½” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598
D6-2R 2” – 4” Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 109 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D6”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
6” – 12” Class 600#, FS body (ASTM-A105), CS 3
mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
BALL D6-2RF 2” – 4” Class 600#, CS body (ASTM-A216 Gr
WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
6” – 12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE D6-4S
1 ½” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 110 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “D6”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
D6-4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
D6-5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
D6-5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE D6-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
D6-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE D6-9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 111 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E”
CLASS: ANSI 900# CS, RTJ
SERVICE: SWEET PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
PIPE (Note 3)
SCH 160 SCH 80 SCH 120
THD (Note 4)/PE BE, SMLS / ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
FLANGES
1500# RTJ Flange Bore to Match Pipe Wall
SW 900# RTJ, WN
ASTM-A105
FITTINGS
6000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A105 ASTM-A234 GR WPB
BRANCH (OLETS)
6000# SCH 80 SCH 120
SW BW
ASTM-A105
VA
LV
ES
(N
ote
2)
GATE E1S, E1Z E1J
BALL E2S, E2SF, E2Z, E2ZF E2J, E2JF
PLUG N/A
GLOBE E4S, E4Z E4J
CHECK E5S, E5Z E5J
NEEDLE E6S, E6SFM N/A
BUTTERFLY N/A
GAUGE E9S N/A
CHOKE N/A E0J N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
2. E1S, E2S, E4S, E5S may be used for vent, drain, sample and instrument service Only 250 2000
3. All welds in WT over 0.750” to be stress relieved per ASME B31.3
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 112 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
E1S 1 ½” and
Smaller Class 1500# (3705# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
E1Z 1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socked weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
E1J 2” – 3” Class 900#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Hand wheel operated. Design per API 600. Test per API 598
E1J 4” and Larger Class 900#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598
BALL
E2S
1 ½” and Smaller
2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598
2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Test per API 598
E2SF
1 ½” and Smaller
2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 113 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL E2ZF
1 ½” and Smaller
2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Test per API 598
2” and Larger Class 900#, FS body (ASTM-A105), CS 1 mil ENP ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
E2JF 2” and Larger Class 900#, FS body (ASTM-A105), CS 1 mil ENP ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE E4S
1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
E4Z
1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
E4J 2” and Larger Class 900#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 114 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK E5S
1 ½” and Smaller
Class 1500# (3705# CWP), FS body (ASTM-A105), steel plate cover, Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Class 1500# (3705# CWP), FS body (ASTM-A105), steel plate cover, Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
E5J 2” - 3” Class 900#, FS body and cover (ASTM- ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
E5J 4” and Larger Class 900#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE E6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
E6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE E9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
CHOKE
E0J 1” – 10” Class 900#, FS body (AISI 8620 or better) SS Trim, RTJ flanged ends per ASME B16.5. TECHNICAL DATA: CV Max. Operation Temperature. Max Operating Pressure .
Master Flo
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 115 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E3”
CLASS: ANSI 900# SS, RTJ
SERVICE: PRODUCED GAS (WET OR CONDENSATE SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6
PIPE
SCH 80S SCH 40S SCH 80S
THD (Note 4)/PE, SMLS BE, SMLS
ASTM-A312 TP 304
FLANGES
900# RTJ Flange Bore to Match Pipe Wall
SW 900# RTJ, WN
ASTM-A182 F 304
FITTINGS
6000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A182 F 304 ASTM-A403 WP 304
BRANCH (OLETS)
6000# SCH 40S SCH 80S
SW BW
ASTM-A182 F 304
VA
LV
ES
GATE E3-1S, E3-1Z N/A
BALL E3-2J, E3-2JF
PLUG N/A
GLOBE E3-4J N/A
CHECK N/A E3-5J, E3-5JP
NEEDLE E3-6S, E3-6SFM N/A
BUTTERFLY N/A
GAUGE E3-9S N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts
2. Valve elastomers in contact with process fluids shall be suitable for exposure to Hydrogen Sulfide, Carbon Dioxide and Aromatics
250 1707
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 116 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
E3-1S
¾” and Smaller
Class 1500# (3705# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, graphite packing, all elastomeric seats and seals must be ED resistant, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DSI Newco Smith Velan Vogt
E3-1Z
¾” and Smaller
Class 1500# (3705# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, graphite packing, all elastomeric seats and seals must be ED resistant, socket weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
BALL E3-2J 1 ½” and Smaller
Class 900#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe per API 607. Test per API 598
KF Nutron PBV Velan WKM
E3-2JF 1 ½” and Smaller
Class 900#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe per API 607. Test per API 598
E3-2J 2” and Larger Class 900#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
E3-2JF 2” and Larger Class 900#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 117 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GLOBE E3-4J
1 ½” and Smaller
Class 900#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DSI Newco Smith Velan Vogt
CHECK E3-5J 2” - 3” Class 900#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
E3-5J 4” and Larger Class 900#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
E3-5JP 2” and Larger Class 900#, 316 SS body, piston and spring, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, bolted cap. Test per API 598
KF Eagle Norriseal Tom Wheatley
NEEDLE E3-6S 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
E3-6SFM 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE E3-9S ¾” and Smaller
4000 PSI @ 500 F, bar stock body (316 SS), Teflon packing, metal seat, one male and three female, needle port. Complete with bleeder valve and 316 SS plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 118 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E5”
CLASS: ANSI 900# CS, RTJ
SERVICE: CORROSIVE PRODUCED OIL / WATER
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
PIPE (Note 3)
SCH 160 SCH 80 SCH 120
THD (Note 4)/PE BE, SMLS / ERW-HFI
ASTM-A106 GR B, GALV ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 7)
FLANGES
1500# RTJ Flange Bore to Match Pipe Wall
SW 900# RTJ, WN
ASTM-A105, Internally Coated (Note 7)
FITTINGS
6000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A105 ASTM-A234 GR WPB, Internally Coated (Note 7)
BRANCH (OLETS)
6000# SCH 80 SCH 120
SW BW
ASTM-A105, Internally Coated (Note 7)
VA
LV
ES
(N
ote
s 2
,8)
GATE E5-1S E5-1J
BALL E5-2S, E5-2SF E5-2J, E5-2JF
PLUG N/A
GLOBE E5-4S E5-4J
CHECK E5-5S E5-5J
NEEDLE E5-6S, E5-6SFM N/A
BUTTERFLY N/A
GAUGE E5-9S N/A
CHOKE N/A N/A N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
2. E5-1S, E5-2S, E5-4S, E5-5S may be used for vent, drain, sample and instrument service only
250 2000
3. All welds in WT over 0.750” to be stress relieved per ASME B31.3
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
7. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159
8. Valves for corrosive applications should be supplied with the appropriate internal valve coating and trim, and it could be Plasite 7159 or Enduro Bond
9. Corrosion Allowance = 1/16”
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 119 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
E5-1S
1 ½” and Smaller
Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, graphite packing, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
E5-1J 2” – 3” Class 900#, FS body and bonnet (ASTM- ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate. Handwheel operated. Design per API 600. Test per API 598
Bonney Forge Crane DSI MTS Newco Velan Vogt Walworth E5-1J 4” and Larger Class 900#, FS body and bonnet (ASTM-
A105), internally coated, Trim 12, HF stellated seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598
BALL E5-2S
1 ½” and Smaller
2160 PSI @ 100 °F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598
2160 PSI @ 100 °F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 120 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL E5-2J 2” and Larger Class 900#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
E5-2JF 2” and Larger Class 900#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE E5-4S
1 ½” and Smaller
Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
E5-4J 2” and Larger Class 900#, FS body and bonnet (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 121 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “E5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK E5-5J 2” - 3” Class 900#, FS body and cover (ASTM- ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
E5-5J 4” and Larger Class 900#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE E5-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
E5-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE E5-9S 3/4” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 122 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F”
CLASS: ANSI 1500# CS, RTJ
SERVICE: SWEET PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 14 16 18 20 24
PIPE (Note 5)
SCH 160 SCH 160
Calculation required
THD (Note 3)/PE BE, SMLS/ ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
FLANGES
1500# RTJ Flange Bore to Match Pipe Wall
SW 1500# RTJ, WN
ASTM-A105
FITTINGS
6000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A105 ASTM-A234 GR WPB
BRANCH (OLETS)
6000# SCH 160 SCH 160
Calculation required
SW BW
ASTM-A105
VA
LV
ES
(N
ote
2)
GATE F1S, F1Z F1J
BALL F2S, F2SF, F2Z, F2ZF F2J, F2JF
PLUG N/A
GLOBE F4S, F4Z F4J, F4W
CHECK F5S, F5Z F5J
NEEDLE F6S N/A
BUTTERFLY N/A
GAUGE F9S N/A
CHOKE N/A F0J N/A
BOLTING (Note 6)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
2. 1/2" and 3/4", F1S, F2S, F4S, F5S and XXS nipples may be used for sample and instrument service only
250 3328
3. Use pipe threaded only for valves connections
4. Flanges shall be used in lieu of unions
5. All welds in WT over 0.750” to be stress relieved per ASME B31.3
6. For studbolts standard lenghts, see ANNEX No. 6
7. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 123 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
F1S
1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted or welded bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt F1Z
1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted or welded bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
F1J 2” – 3” Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Hand wheel operated. Design per API 600. Test per API 598
F1J 4” and Larger Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598
BALL F2S
1 ½” and Smaller
6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598
6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socket welded ends per ASME B16.11, reduced port, lever operated. Fire safe. Test per API 598
F2SF
1 ½” and Smaller
6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598
F2ZF 1 ½” and Smaller
6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socket welded ends per ASME B16.11, full port, lever operated. Fire safe. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 124 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL F2J 2” and Larger Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated,. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
F2JF 2” and Larger Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated,. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE F4S
1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt F4Z
1 ½” and Smaller
Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
F4J 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
F4W 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, BW ends, SCH 160, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
CHECK F5S
1 ½” and Smaller
Class 1500# (3705# CWP), FS body (ASTM-A105), steel plate cover, Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Class 1500# (3705# CWP), FS body (ASTM-A105), steel plate cover, Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 125 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK F5J 2” - 3” Class 1500#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
Class 1500#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover.Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE F6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
GAUGE F9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
CHOKE F0J 1” – 10” Class 1500#, CS body (AISI 8620 or better), SS Trim, RTJ flanged ends per ASME B16.5. TECHNICAL DATA: CV Max. Temp Operation. Max Press Operation
Master Flo
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 126 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F3”
CLASS: ANSI 1500# SS, RTJ
SERVICE: PRODUCED GAS (WET OR CONDENSATE SERVICE)
SIZE 1/2 3/4 1 1 1/2 2 3 4 6
PIPE
SCH 160
THD (Note 4)/PE, SMLS BE, SMLS
ASTM-A312 TP 304
FLANGES
1500# RTJ Flange Bore to Match Pipe Wall
SW 1500# RTJ, WN
ASTM-A182 F 304
FITTINGS
6000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A182 F 304 ASTM-A403 WP 304
BRANCH (OLETS)
6000# SCH 160S
SW BW
ASTM-A182 F 304
VA
LV
ES
GATE N/A
BALL F3-2J, F3-2JF
PLUG N/A
GLOBE N/A
CHECK N/A F3-5J, F3-5JP
NEEDLE F3-6S, F3-6SFM N/A
BUTTERFLY N/A
GAUGE F3-9S N/A
BOLTING (Note 5)
Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions per ASME B16.5
1. Maximum design conditions: 250 °F - 2845 PSIG (Group 2.1) 2. Valve elastomers in contact with process fluids shall be suitable for exposure to
Hydrogen Sulfide, Carbon Dioxide and Aromatics
200 3000
250 2845
300 2690
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 127 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL F3-2J 1 ½” and Smaller
Class 1500#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe per API 607. Test per API 598
KF Nutron PBV Velan WKM
F3-2JF 1 ½” and Smaller
Class 1500#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe per API 607. Test per API 598
F3-2J 2” and Larger Class 1500#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
F3-2JF 2” and Larger Class 1500#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
CHECK F3-5J 2” - 3” Class 1500#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
F3-5J 4” and Larger Class 1500#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 128 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK F3-5JP 2” and Larger
Class 1500#, 316 SS body, piston and spring, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, bolted cap. Test per API 598
KF Eagle Norriseal Tom Wheatley
NEEDLE F3-6S 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
F3-6SFM 1” and Smaller
2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE F3-9S ¾” and Smaller
4000 PSI @ 500 F, bar stock body (316 SS), Teflon packing, metal seat, one male and three female, needle port. Complete with bleeder valve and 316 SS plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 129 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F5”
CLASS: ANSI 1500# CS, RTJ
SERVICE: CORROSIVE PRODUCED OIL / WATER
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 14 16 18 20 24
PIPE (Note 5)
SCH 160
SCH XXH SCH 160 SCH 160
Calculations required
THRD (Note 3)/PE BE, SMLS/ ERW-HFI
ASTM-A106 GR C ASTM-A106 GR C, API-5L X56
FLANGES
1500# RTJ Flange Bore to Match Pipe Wall
SW 1500# RTJ, WN
ASTM-A105 ASTM A-694 F56
FITTINGS
6000# Wall Thickness to Match Pipe
SW BW, SMLS
ASTM-A105 ASTM-A234 GR
WPC ASTM-A860 WPHY F56
BRANCH (OLETS)
6000# SCH 160 SCH 160
Calculations required
SW BW
ASTM-A105
VA
LV
ES
(N
ote
2)
GATE F5-1S F5-1J
BALL F5-2S, F5-2SF F5-2J, F5-2JF
PLUG N/A
GLOBE F5-4S F5-4J
CHECK F5-5S F5-5J
NEEDLE F5-6S N/A
BUTTERFLY N/A
GAUGE F5-9S N/A
CHOKE N/A N/A N/A
BOLTING (Note 6)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
2. 1/2" and 3/4", F5-1S, F5-2S, F5-4S, F5-5S and XXS nipples may be used for vent, drain, sample and instrument service only
250 3328
3. Use pipe threaded only for valves connections
4. Flanges shall be used in lieu of unions
5. All welds in WT over 0.750” to be stress relieved per ASME B31.3
6. For studbolts standard lenghts, see ANNEX No. 6
7. For ANSI Pipe Schedules, see ANNEX No. 7
1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 130 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
F5-1S
1 ½” and Smaller
Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, graphite packing, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
F5-1J 2” – 3” Class 1500#, FS body and bonnet (ASTM- ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate. Handwheel operated. Design per API 600. Test per API 598
F5-1J 4” and Larger Class 1500#, FS body and bonnet (ASTM-A105), internally coated, Trim 12, HF stellated seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598
BALL F5-2S
1 ½” and Smaller
6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598
6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 131 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL F5-2J 2” to 10” Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, metal to metal seats, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
Class 1500#, FS body (ASTM-A350 LF2), 316 SS ball and stem, metal to metal seats, RTJ flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
F5-2JF 2” to 10” Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, metal to metal seats,, flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
12” and Larger
Class 1500#, FS body (ASTM-A350 LF2), 316 SS ball and stem, metal to metal seats, RTJ flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE F5-4S
1 ½” and Smaller
Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
F5-4J 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105) , Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 132 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “F5”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK F5-5S
1 ½” and Smaller
Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598
CHECK F5-5J 2” - 3” Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
F5-5J 4” and Larger Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE F5-6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
F5-6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
GAUGE F5-9S 3/4” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 133 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “G”
CLASS: ANSI 1500# CS, RTJ
SERVICE: HOT HIGH PRESSURE WATER INJECTION
SIZE 1/2 3/4 1 1-1/2 2 4 6 8 10 12 16 20 24
PIPE
SCH 160 SCH 160 Calculation required
THD (Note 5)/PE BE, SMLS/ ERW-HFI
ASTM-A106 GR B, GALV ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 6)
2. This specification will be used Only for replacement in existing systems 250 3332
3. 1/2" and 3/4", G2S, G4S, G5S and XXS nipples may be used for vent, drain, sample and instrument service Only.
4. Flanges shall be used in lieu of unions
5. Use only threaded pipe for valves connections
6. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159
7. Valves for corrosive applications should be supplied with the appropriate internal valve coating and trim, and it could be Plasite 7159 or Enduro Bond
8. For studbolts standard lenghts, see ANNEX No. 6
9. For ANSI Pipe Schedules, see ANNEX No. 7
10. For Internal Coating Specifications, see ANNEX No. 8
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 134 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “G”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL G2S 1-1/2” and Smaller
3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Floating ball. Fire safe. Test per API 598
KF Nutron PBV Velan WKM
G2Z 1-1/2” and Smaller
3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, reduced port, lever operated. Floating ball. Fire safe. Test per API 598
G2SF 1-1/2” and Smaller
3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Floating ball. Fire safe. Test per API 598
G2ZF 1-1/2” and Smaller
3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, full port, lever operated. Floating ball. Fire safe. Test per API 598
G2J 2” and Larger
Class 1500#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
Class 1500#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
GLOBE G4S 1-1/2” and Smaller
Class 1500# (3705# CWP), FS body (ASTM-A105), and bonnet, Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt G4Z 1-1/2” and
Smaller Class 1500# (3705# CWP), FS body (ASTM-A105), and bonnet, Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 135 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “G”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GLOBE G4J 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Class 1500# (3705# CWP), FS body (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
Bonney Forge DHV KF Eagle Tom Wheatley Velan
G5Z 1-1/2” and Smaller
Class 1500# (3705# CWP), FS body (ASTM-A105), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
G5J 2” - 3” Class 1500#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
G5J 4” and Larger Class 1500#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE G6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
GAUGE G9S ¾” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 136 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
2. Threaded piping and valves (3/4” max) are allowed on instrument connections only
A flanged isolation valve is to be installed upstream of the threaded connections Threaded piping to be XXS (3/4” max)
-20/100 6250
200 6250
250 6160
3. The MDMT must be verified for all ASTM-106 B/C, API-5L X60, ASTM-A105 and
ASTM-A234 WPC materials with a wall thickness greater than 0.500”.
4. Use pipe threaded only for valves connections
5. Vents and drains shall be 2” flanged.
6. For studbolts standard lenghts, see ANNEX No. 6
7. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 137 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE
H1J 2” and Larger Class 2500# (6250 PSIG @ 100 °F), Forged CS body and bonnet (ASTM-A350 GR LF3), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598
Bonney Forge Edwards KF
BALL H2S
3/4” and Smaller 10000# CWP (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body, 316 SS ball and stem, Peek soft seat, EPDM seals, all elastomeric seats and seals must be ED resistant, compact valve, bolt-on female NPT connections on both ends, lever operated, bolted body construction, replaceable seat, block and bleed. Fire safe per API 6FA. Design and test per API 6D
Alco FMC Jamesbury Velan
H2X1 1” – 1 ½” 10000# CWP (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body, 316 SS ball and stem, Peek soft seat, EPDM seals, all elastomeric seats and seals must be ED resistant, compact valve, bolt-on female SW connection on one end and bolt-on ½” FNPT connection on other end, lever operated, bolted body construction, replaceable seat, block and bleed. Fire safe per API 6FA. Design and test per API 6D
H2X2 1” – 1 ½” 10000# CWP (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body, 316 SS ball and stem, Peek soft seat, EPDM seals, all elastomeric seats and seals must be ED resistant, compact valve, bolt-on female SW connection on one end and bolt-on blind flange on other end, lever operated, bolted body construction, replaceable seat, block and bleed. Fire safe per API 6FA. Design and test per API 6D
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 138 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL H2J 2” and Larger Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), 316 SS ball and stem, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, reduced port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
Cameron Grove KF Nutron PBV TK Velan
H2JF 2” and Larger Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), 316 SS ball and stem, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, full port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
CHECK H5J 2” - 3” Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted bonnet. Fire safe per API 6FD. Design and test per API 6D
KF Tom Wheatley Wheatley
H5J 4” and Larger Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted bonnet. Body drain ½” NPT. Fire safe per API 6FD. Design and test per API 6D
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 139 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
NEEDLE H6S 1” and Smaller 10000# CWP, bar stock body (316SS), Teflon packing, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
GAUGE H9S ¾” and Smaller 10000# CWP, bar stock body (316 SS), Teflon stem seat, one male and three female, needle port, integral seat. Complete with bleeder valve and 316 SS plugs
AGCO
HEX
Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 140 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H3”
CLASS: ANSI 2500# SS, HUB
SERVICE: PRODUCED GAS (WET OR CONDENSATE SERVICE)
SIZE 1/2 3/4 1 1 ½ 2 3 4 6
PIPE
SCH XXS 0.750 1.125
PE BE, SMLS
ASTM-A312 TP 304
HUBS
Size 1 GR 4 1 GR 5 1 ½ GR 11 2 GR 14 3 GR 23 4 GR 31 6 GR 46
2. Valve elastomers in contact with process fluids shall be suitable for exposure to wet
Carbon Dioxide.
-20/100 6000
200 5160
3. For ANSI Pipe Schedules, see ANNEX No. 7 250 4910
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 141 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL H3-2GF 1 ½” and Smaller
Class 2500#, 316 SS body, ball and stem, Teflon seals, Grayloc hub ends (hub bore to match pipe ID), full port, lever operated. Floating ball. Fire safe per API 607. Tscarevest per API 598
FMC Nutron TK Velan
H3-2G 2” and Larger Class 2500#, 316 SS body, ball and seats, stem and trunnion, peek seat inserts, EPDM seals, Grayloc hub ends (hub bore to match pipe ID), reduced port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
Cameron FMC Grove KF PBV TK Velan
H3-2GF 2” and Larger Class 2500#, 316 SS body, ball and seats, stem and trunnion, peek seat inserts, EPDM seals, Grayloc hub ends (hub bore to match pipe ID), full port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
CHECK H3-5G 1 ½” and Smaller
Class 2500#, 316 SS body, Trim 12, HF Stellite® seats ,PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), horizontal swing, bolted bonnet. Design per API 602. Test per API 598
KF Tom Wheatley Wheatley
2” - 3” Class 2500#, 316 SS body, Trim 12, HF Stellite® seats PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), swing check, horizontal or vertical service, bolted bonnet. Fire safe per API 6FD. Design and test per API 6D
4” and Larger Class 2500#, 316 SS body, Trim 12, HF Stellite® seats PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), swing check, horizontal or vertical service, bolted bonnet. Body drain ½” NPT. Fire safe per API 6FD. Design and test per API 6D
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 142 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H3”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK H3-5GP 1 ½” and Larger Class 2500#, 316 SS body, Trim 12, HF Stellite® seats PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), piston check, bolted bonnet. Fire safe per API 6FD. Design and test per API 6D
Bonney Forge Daniel KF Norriseal
NEEDLE H3-6S 1” and Smaller 10000# CWP, bar stock body (316SS), Teflon packing, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
GAUGE H3-9S ¾” and Smaller 10000# CWP, bar stock body (316 SS), Teflon stem seat, one male and three female, needle port, integral seat. Complete with bleeder valve and 316 SS plugs
AGCO HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 143 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H4”
CLASS: ANSI 2500# DUPLEX, HUB
SERVICE: PRODUCED GAS
SIZE 1/2 3/4 1 1 1/2 2 2 1/2 3 4 6
PIPE
SCH 80S 160
PE BE
ASTM-A790 S31803 Duplex, SMLS (P 10H – G 1)
HUBS
Size N/A
PN N/A
Desc. GRAYLOC HUB, BW, Bore to Match Pipe Wall
Mat. ASTM-A182 F51 (P 10H – G 1)
CLAMPS
Size N/A
PN N/A
Desc. GRAYLOC CLAMP WITH BOLTING
Mat. ASTM-A182 F51 (P 10H – G 1)
FITTINGS
Wall Thickness to Match Pipe
SW, SMLS BW, SMLS
ASTM-A182 F51 (P 10H – G 1) ASTM-A815 S31803, CLASS WP-S (P 10H – G 1)
VA
LV
ES
GATE N/A
BALL H4-2GF
PLUG N/A
GLOBE N/A
CHECK N/A
NEEDLE N/A
BUTTERFLY N/A
GAUGE N/A
BOLTING (Note 3)
Bolts: ASTM-A193 GR B8 CL 1 Thread and dimensions per GRAYLOC Specifications Nuts: ASTM-A194 GR 8, Heavy Hex Nuts
SEALS
Size N/A
PN N/A
Desc. GRAYLOC SEAL RING
Mat. SS AISI 630 (17-4 PH), MoS2 with Graphite Coated
NOTES:
1. Maximum design conditions: 200 °F - 6200 PSIG (Group 2.8) 2. Threaded joints shall be used only for instrumentation, vent, drains and similar purposes,
and shall be not larger than DN 15 (NPS ½”)
PRESS./TEMP. RATINGS
°F PSIG REF. ASME B16.5
-20/100
6250
200 6200
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 144 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “H4”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL H4-2GF 1 ½” and Smaller
Class 2500#, forged duplex ASTM-A182 F51 body, ball and stem, seats and seals must be ED resistant, Grayloc Hub ends (hub bore to match pipe ID), full port, lever operated. Floating ball. Fire safe per API 607. Test per API 598
ALCO HI-TEK
2” – 6” Class 2500#, forged duplex ASTM-A182 F51 body, ball and seats, stem and trunnion, seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), full port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
ALCO HI-TEK
H4-2G 2” – 6” Class 2500#, forged duplex ASTM-A182 F51 body, ball and seats, stem and trunnion, seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), reduced port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D
ALCO HI-TEK
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 145 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “J”
CLASS: ANSI 150# CS, RF
SERVICE: INSTRUMENT AIR / UTILITY AIR / UTILITY WATER
SIZE 1/2 3/4 1 2 3 3 1/2 4 6 8 10 12 16 20 24
PIPE (Note 2)
SCH 160 SCH 80 STD
THD, SMLS BE, SMLS / ERW-HFI
ASTM-A53 GR B, GALV T&C ASTM-A53 GR B, API-5L GR B
FLANGES
150# RF Flange Bore to Match Pipe Wall
THD 150# RF, WN
ASTM-A105, GALV ASTM-A105
FITTINGS
3000# Wall Thickness to Match Pipe
THD BW, SMLS
ASTM-A105, GALV ASTM-A234 GR WPB
BRANCH (OLETS)
N/A
STD
BW
ASTM-A105
VA
LV
ES
GATE J1S J1R
BALL J2S, J2SF J2R, J2RF
PLUG N/A
GLOBE J4S J4R
CHECK J5S J5R
NEEDLE J6S, J6SFM N/A
BUTTERFLY N/A J7RL, J7RW
GAUGE J9S
BOLTING (Note 3)
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)
2. All galvanized piping shall be painted externally after fabrication according to Specification: PAM-EC-50-SP-001 “Coating Specification”
250 245
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 146 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “J”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
GATE J1S
3” and Smaller
Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8,HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DSI Newco Smith Velan Vogt
J1R 3 ½” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598
J1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598
BALL J2S
3” and Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598.
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598.
J2R 3 ½” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem. RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated, Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 147 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “J”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BALL J2RF 3 ½” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34
J2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
J2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D
GLOBE
J4S
3” and Smaller
Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598
Bonney Forge DHV DSI Newco Smith Velan Vogt
J4R 3 ½” and Larger
Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 148 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “J”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK J5S
3” and Smaller
Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598
J5R 3 ½” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598
J5R 4” and Larger Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598
NEEDLE J6S 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
J6SFM 1” and Smaller
6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
BUTTER-FLY
J7RL 3 ½” and Larger
Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 149 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “J”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
BUTTER-FLY
J7RW 3 ½” and Larger
Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598
Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan
GAUGE J9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 150 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “L”
CLASS: ANSI 150# CS, FF
SERVICE: FIREWATER
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24
PIPE (Note 2)
SCH 160 SCH 80 STD
THD, GALV BE, SMLS/ ERW-HFI
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B, ASTM-A53 GR B
FLANGES
150# FF Flange Bore to Match Pipe Wall
THD 150# FF, WN
ASTM-A105, GALV ASTM-A105
FITTINGS
3000# Wall Thickness to Match Pipe
THD BW, SMLS
ASTM-A105, GALV ASTM-A234 GR WPB
BRANCH (OLETS)
N/A
STD
BW
ASTM-A105
VA
LV
ES
GATE L1S L1F
BALL L2S Use Gate
PLUG N/A
GLOBE L4S L4F
CHECK L5S L5W
NEEDLE L6S N/A
BUTTERFLY N/A L7FL, L7FW
GAUGE L9S N/A
BOLTING (Note 3)
Bolts: ASTM-A193 GR B7 Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H Fluorocarbon Coated Heavy Hex Nuts
GASKETS 150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder (Flexitallic, Lamons, Garlock - USA ONLY)
2. All galvanized piping shall be painted externally after fabrication according to Specification: PAM-EC-50-SP-001 “Coating Specification”
250 245
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 151 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “L”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
ANGLE VALVE
2 1/2" Angle Hose Valve – Female NPT inlet x Male hose NH thread outlet, for use as fire hose outlet connection, Cast brass (Polished brass, rough chrome plated or polished chrome plated), 300 PSI, UL listed/FM Approved, shall include Cap with Chain
NFPA Member Brands
GATE
L1S 3” and Smaller Class 300# (600# CWP), cast bronze body and bonnet (ASTM-B62), bronze stem, threaded ends per ASME B1.20.1, OS&Y, union bonnet, solid wedge disc. Hand wheel operated. Test per API 598. UL/FM
Crane DSI Fairbanks Velan Vogt Walworth
L1F 4” Class 125#, cast iron body and bonnet (ASTM-A126 Class B), bronze stem, FF flanged ends per ASME B16.1, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Test per API 598. UL/FM
Crane DSI Fairbanks Velan Walworth
L1F 6” and Larger 125# ANSI, cast iron body and bonnet (ASTM-A126 Class B), bronze stem, FF flanged ends per ASME B16.1, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Test per API 598. UL/FM
BALL L2S 3” and Smaller 285 PSIG @ 100 F, cast bronze body (ASTM-B62), bronze ball and stem, Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Test per API 598
AOP Jamesbury Nibco Quadrant
GLOBE L4S 3” and Smaller Class 300# (600# CWP), cast bronze body and bonnet (ASTM-B62), bronze stem, threaded ends per ASME B1.20.1, OS&Y, union bonnet. Hand wheel operated. Test per API 598
Crane
DSI
Fairbanks
Powell Smith Vogt
L4F 4” and Larger 125# ANSI, cast iron body and bonnet (ASTM-A126 Class B), bronze trim, FF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Test per API 598
Crane DSI Fairbanks Velan Walworth
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 152 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
SPECIFICATION “L”
TYPE TAG SIZE DESCRIPTION ACCEPTABLE
BRANDS
CHECK L5S
3” and Smaller Class 300# (600# CWP), bronze body and cap (ASTM-B62), bronze disc, threaded ends per ASME B1.20.1, horizontal swing, screwed cover. Test per API 598. UL/FM
Bonney Forge
Crane
DSI Fairbanks
Nibco KF Eagle Wheatley
L5W 4” and larger 150# ANSI, cast iron body (ASTM-A126 Class B), aluminum bronze plates, monel spring, 316 SS shaft, Viton seal. Duo-Chek (wafer type). Test per API 598. UL/FM
Crane KF Eagle Mueller
NEEDLE L6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105
AGCO Balon KF NOSHOK Swagelok
BUTTER-FLY
L7FL 4” and Larger 285 PSIG min CWP, ductile iron body, bronze or nickel plated iron disc, 316 SS shaft, Viton seat, lug type to mate with FF flanges, according to API 609. Hand wheel operated. Test per API 598
Bray
Center Line
Demco Flow seal Keystone KF Norris L7FW 4” and Larger 285 PSIG min CWP, ductile iron body,
bronze or nickel plated iron disc, 316 SS shaft, Viton seat, wafer type to mate with FF flanges, according to API 609. Hand wheel operated. Test per API 598
GAUGE L9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug
AGCO AOP HEX Swagelok
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 153 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
15 ANNEXES
ANNEX No. 1: STRAINERS
ANNEX No. 2: ACCESS FITTINGS
ANNEX No. 3: INSULATING KITS
ANNEX No. 4: BLEED RINGS
ANNEX No. 5: GASKETS
ANNEX No. 6: BOLTS DIMENSIONS
ANNEX No. 7: ANSI PIPE SCHEDULES (CS & SS) [in]
ANNEX No. 8: INTERNAL COATING
ANNEX No. 9: API FLANGES
ANNEX No. 10: U-BOLTS DIMENSIONS
ANNEX No. 11: FBE EXTERNAL COATING
ANNEX No. 12: OVAL & OCTOGONAL RINGS
ANNEX No. 13: ACRYLIC THREAD SEALANT DATA SHEETS
ANNEX No. 14: GLOSSARY
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 154 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 1: STRAINERS A1.1 TEMPORARY CONE STRAINERS DESCRIPTION: 1. Type of Strainer Required 2. Line Size: 3/4” – 36” 3. Mating Flange Rating: 150# - 1500# 4. Flange face type: RF, FF, RTJ 5. Length Required. If necessary 6. Material of Construction 7. Wire Mesh & Material if required
Example: TEMPORARY CONE STRAINERS FOR 10" LINE SIZE, 300#, FLANGE TYPE RF WITH 20 MESH (1/32" OPENINGS). CS BODY. 316 SS MESH. MODEL: WEAMCO TYPE CWO A1.2 STRAINERS TYPE “Y” DESCRIPTION: 1. Type of Strainer Required 2. Line Size: 3/4” – 36” 3. Mating Flange Rating: 150# - 1500# 4. Flange face type: RF, FF, RTJ 5. Mesh (Screen) 6. Material of Construction 7. Body drain
Example: STRAINER, TYPE "Y", 10" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN (MESH 12), CS BODY. 2" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC, TITAN A1.3 STRAINERS TYPE “BASKET” DESCRIPTION: 1. Type of Strainer Required 2. Line Size: 3/4” – 36” 3. Mating Flange Rating: 150# - 1500# 4. Flange face type: RF, FF, RTJ 5. Mesh (Screen) 6. Material of Construction 7. Body drain Example: BASKET STRAINER, 2" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN (MESH 12), 316 SS BODY. 1" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC, TITAN
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 155 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 2: ACCESS FITTINGS A2.1 FOR CHEMICAL INJECTION USE CHEMICAL INJECTION QUILL – KENKO KINJ model or similar
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 156 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
A2.2 FOR SAMPLING CONNECTIONS DESCRIPTION: ROHRBACK COSASCO MODEL 57. TWO-INCH SYSTEM ACCESS FITTING ASSEMBLIES WITH SOLID PLUG, NON TEE BODY STYLE. MODEL: 57-141-0-72-S31600-1
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 157 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 158 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 3: INSULATING KITS A3.1 FOR STANDARD APPLICATIONS (SERVICE TEMPERATURE UP TO 302°F) DESCRIPTION: 2" INSULATING KIT, ANSI 300# RF, GPT VCS TYPE, G-10 GASKET, TEFLON (SPRING-ENERGIZED) SEAL, WITH COMPLETE SET OF GRE INSULATING FULL LENGHT SLEEVES, GRE INSULATING WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF). A3.2 FOR HIGH TEMPERATURE APPLICATIONS (e.g. HOT OIL SERVICE UP TO 392°F) DESCRIPTION: 2" INSULATING KIT, ANSI 300# RF, GPT VCS TYPE, G-11 GASKET, PTFE (SPRING-ENERGIZED) SEAL, WITH COMPLETE SET OF NOMEX® INSULATING FULL LENGHT SLEEVES, G-3 INSULATING WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF).
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 159 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 160 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 161 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 162 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 163 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 4: BLEED RINGS DESCRIPTION: BLEED RING, 4" DIAM RF, CLASS 300#, CS ASTM-A105 OR ASTM-A516 GR 70, DRAINAGE ORIFICE 3/4" DIAM NPT BLEED RINGS FOR ANSI 150 RF, 300 RF, 600 RF, 900 RF and 1500 RF
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 168 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 8: INTERNAL COATING A8.1 PLASITE 7159
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 169 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 170 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
A8.2 ENDURO BOND ENDURO-BONDTM Properties
An exceptional group of engineered thermal polymers allowing the process engineer greater versatility with a single material. ENDURO-BONDTM is characterized by flexibility and good retention of mechanical properties. ENDURO-BONDTM meets the demands of the modern materials and corrosion engineer.
Dimensional Stability Low coefficients of thermal expansion Low creep Low water absorption
Mechanical Properties High strength Wear resistant, excellent High strength/weight ratio
Chemical Resistance Stability at elevated temperatures. Resistant to a broad range of solvents, mineral and organic acids, alkalis and corrosive waters.
Processing Highly predictable shrinkage for close tolerances
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 171 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 9: API FLANGES
DESCRIPTIONS:
2 9/16” FLANGE, WELDING NECK, API 6A TYPE 6B, 2 9/16" DIAM, 3000#, SCH 80, CS ASTM A105, RTJ, RING 27, DIMENSIONS PER API 6A / ASME B16.5 FLANGE, WELDING NECK, API 6A TYPE 6B, 2 9/16" DIAM, 5000#, SCH 80, CS ASTM A105, RTJ, RING 27, DIMENSIONS PER API 6A / ASME B16.5
RING FLANGE API, OCTOGONAL RING R27, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 2 9/16" RTJ (FLEXITALLIC OR LAMONS)
BOLTS, STUD, 1" DIAM x 7" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER ASME B16.5
3 1/8” FLANGE, WELDING NECK, API 6A TYPE 6B, 3 1/8" DIAM, 3000#, SCH 80, CS ASTM A105, RTJ, RING 31, DIMENSIONS PER API 6A / ASME B16.5 FLANGE, WELDING NECK, API 6A TYPE 6B, 3 1/8" DIAM, 5000#, SCH 80, CS ASTM A105, RTJ, RING 35, DIMENSIONS PER API 6A / ASME B16.5
RING FLANGE API, OCTOGONAL RING R31, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 3 1/8" RTJ (FLEXITALLIC OR LAMONS)
BOLTS, STUD, 1 1/8" DIAM x 6 1/2" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER ASME B16.5
4 1/16” FLANGE, WELDING NECK, API 6A TYPE 6B, 4 1/16" DIAM, 3000#, SCH 40 (80), CS ASTM A105, RTJ, RING 37, DIMENSIONS PER API 6A / ASME B16.5 FLANGE, WELDING NECK, API 6A TYPE 6B, 4 1/16" DIAM, 5000#, SCH 40 (80), CS ASTM A105, RTJ, RING 39, DIMENSIONS PER API 6A / ASME B16.5
RING FLANGE API, OCTOGONAL RING R37, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 4 1/16" RTJ (FLEXITALLIC OR LAMONS)
BOLTS, STUD, 1 1/8" DIAM x 7 1/2" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER ASME B16.5
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 172 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 173 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 10: U-BOLTS DIMENSIONS
U-BOLTS WITH 4 HEX NUTS
DN PIPE [in]
OD PIPE [in]
D LONG U
[mm] DIAM U
[in] LONG THD
[mm]
1/2 0.840 2 3/4 173 1/4 60
3/4 1.050 2 3/4 182 1/4 60
1 1.315 2 3/4 192 1/4 60
1 1/4 1.660 2 7/8 212 3/8 60
1 1/2 1.900 3 228 3/8 65
2 2.375 3 1/4 260 3/8 65
2 1/2 2.875 3 3/4 305 1/2 75
3 3.500 4 343 1/2 75
4 4.500 4 1/2 408 1/2 75
6 6.625 6 1/8 575 5/8 100
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 174 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 193 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 194 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
A13.1 MEDIUM STRENGHT ACRYLIC
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 195 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
BASIC ENGINEERING B43
Standard Specification for Pipe, Valves & Fittings
Department: GERENCIA DE PROYECTOS
Code No.: 43B011-CPT-50-SP-004
Revision: 1
Page No.: 196 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ANNEX No. 14: GLOSSARY
AFC Approved for construction ANSI American National Standards Institute API American Petroleum Institute ASME American Society of Mechanical Engineers ASTM American Society for Testing and Materials BE Beveled Ends BW Butt Welding CS Carbon Steel CWP Cold Working Pressure ED Explosive Decompression ENP Electroless Nickel Plating ERW Electric Resistance Welding FF Flat Face FG Flexible Graphite FS Forged Steel GR Grade HF Hard Faced HFI High Frequency Induction LR Long radius MAWP Maximum Allowable Working Pressure MDMT Minimum Design Metal Temperature MSS Manufacturers Standardization Society NPS Nominal Pipe Size NPT Nominal Pipe Thread OS&Y Outside Screw and Yoke PE Plain Ends PEEK Polyether Ether Ketone PSI Pounds per Square Inch PSIG Pounds per Square Inch Gauge RF Raised Face RP Recommended Practice RTJ Ring Type Joint SCH Schedule SMLS Seamless SP Standard Practice SR Short radius SS Stainless Steel STD Standard SW Socket Weld T&C Threaded & Coupled THD Threaded THK Thickness TP Type VCS Very Critical Service WN Welding Neck WOG Water, Oil and Gas