BASIC DATA SPHERE OF BUSINESS organosilicon compounds silicone resins silicone corrosion inhibitor silicone additives profesional cleaning agents De-/-Anti-Icer SLOCHEM Ltd. Farsky Mlyn 2 Trnava 917 00 SLOVAKIA webpage: www.slochem.sk
BASIC DATA SPHERE OF BUSINESS
organosilicon compounds
silicone resins
silicone corrosion inhibitor
silicone additives
profesional cleaning agents
De-/-Anti-Icer
SLOCHEM Ltd.Farsky Mlyn 2Trnava 917 00 SLOVAKIAwebpage: www.slochem.sk
PRINCIPLE
Our De-/Anti-Icer was developed by SLOCHEM on the basis of
these fundamental principles:
•efficiency of De-/Anti-Icer
•biodegradability of the De-/Anti-Icer
•with minimum COD and BOD
•without content of nitrogen, chlorides and urea
•fairly good price
SLOPUR - CAR
CHEMICAL COMPOSITION: Nontoxic liquid, composed by salts of acids, corrosion inhibitors and additives in the water.
APPLICATION
SLOPUR - CAR use in concentrated form to creation protecting film with thermal resistance -35 0C. For achievement of maximum effect of anti-icing and de-icing is suitable apply before creation of icing.
DOSING
50-65 g/m240-50 g/m235-40 g/m2ice, freezing rain
40-50 g/m230-40 g/m220-35 g/m2snow, snowfall
30-40 g/m220-30 g/m210-20 g/m2packed snow, ice
-18 to -260C -8 to -180C 0 to -80CCONDITION
TEMPERATURE
* Real dosing depend on the weather situation and the indicated application rates can be significantly different.
EFFICIENCY
0%10%20%30%40%50%60%70%80%90%100%
-40 -35 -30 -25 -20 -15 -10 -5 0
freezing - point [ 0C ]
SL
OP
UR
-CA
R [
% m
ass.
]
ECONOMY
To obtain maximum effectiveness of SLOPUR -CAR for ANTI-ICING,
is recommended to apply the product shortly before the expected freezing
precipitation will occur.
For the most economical using for DE-ICING, is recommended to
apply sufficient quantities just to penetrate the ice and the packed snow
layers from the runway, turn into slush, and then remove with mechanical
snow-clearing equipment.
CORROSION SPEED
CORROSION SPEED (mm/year)
steel aluminum copper
NaCl (5%) 0,01 0,035 0,08
SLOPUR-CAR 0,00009 0,0025 0,00075
steel
aluminium
copper
0
0,01
0,02
0,03
0,04
0,05
0,06
0,07
0,08
0,09
mm
/yea
r
EROSION
♦Erosion was testing by accredited laboratory according to STN 73 1326
and comparing with s 3% solution of NaCl.
TEST RESULTS
sample n.: 1 2 3 mean
25 17,8 17,8 8,9 14,8
50 22,2 35,7 22,3 26,7
75 53,3 44,6 35,6 44,5
100 75,5 75,8 53,4 68,2
125 84,4 102,5 84,6 90,5
150 115,5 124,8 115,7 118,7
Was
te (
g.m
-2)
3% solution of NaCl
TEST RESULTS
sample n.: 4 5 6 mean
25 0,0 0,0 0,0 0,0
50 0,0 0,0 0,0 0,0
75 0,0 0,0 0,0 0,0
100 0,0 0,0 0,0 0,0
125 0,0 0,0 0,0 0,0
150 0,0 0,0 0,0 0,0
Was
te (
g.m
-2)
SLOPUR-CAR
BIODEGRADABILITY
0
20
40
60
80
100
0 7 14 21 28
days
% b
iod
eg
rad
ab
ility
CHEMICAL OXYGEN DEMAND
> COD= 0,2756 g / g O2 > BOD= 0,122 g / g O2 chemical oxygen demand biological oxygen demand
urea
glycol (50% )
SLOPUR-CAR
0
0,5
1
1,5
2
2,5
FRICTION FACTOR
♦Place: RWY
♦Air temperature: -4 °C
♦Surface temperature of RWY:-5 °C
♦Status of RWY: dry, clean
♦Friction factor measured by ADR FM:
♦-dry surface: 0,95 – 1,00
♦-treated by SLOPUR-CAR: 0,75 – 0,85
..THANK YOU FOR YOUR ATTENTION..
Contact: SLOCHEM Ltd.Farsky Mlyn 2Trnava 917 00 SLOVAKIAtel./fax: 00421-33-5522 572email: [email protected]: www.slochem.sk