This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
223
Stam
pati
BASE STAMPATA INOX Ø85 – STELO ARTICOLATO 8°
STAINLESS STEEL PRESSED BASE Ø85 – 8° ARTICULATED SCREW
BASE STAMPATA INOX Ø123 CON 4 FORI, STELO INOX SNODATO 8°
STAINLESS STEEL PRESSED BASE Ø123 WITH 4 FIXING HOLES ARTICULATED STAINLESS STEEL SCREW 8°
• Material: stainless steel base 1.4301. Stainless steel screw 1.4301. The levelling element could be supplied with steel nut.
• Load values above mentioned have to be considered referring to static conditions calculated at the half of the screw length. In conditions of vibrations or in presence of dynamic loads these values should be reduced. For further information consult our technical office. We cannot accept responsibility for mounts that have been tampered or modified
225
Stam
pati
CODICE - CODE DIMENSIONI PRINCIPALI - MAIN DIMENSIONSdescrizione
BASE STAMPATA INOX Ø 123 CON GOMMA VULCANIZZATA, STELO INOX SNODATO 8°
STAINLESS STEEL PRESSED BASE Ø 123 WITH VULCANIZED RUBBER, ARTICULATED STAINLESS STEEL SCREW 8°
• Material: stainless steel 1.4301 base. Possibility to drill the rubber to obtain fixing holes. Pad: vulcanized rubber NBR 80 shore. Stainless steel screw 1.4301. The levelling element could be supplied with steel nut.
• Load values above mentioned have to be considered referring to static conditions calculated at the half of the screw length. In conditions of vibrations or in presence of dynamic loads these values should be reduced. For further information consult our technical office. We cannot accept responsibility for mounts that have been tampered or modified