10 Bar Feed Collets Workpiece Clamping Technical Information • Material has to be chamfered • No warranty for thin-walled collets • Diameter of material must not be bigger than the nominal size of collets • Attention: Material could be bigger at the end of the bar. Do not measure in the middle of the bar, only after the chamfering • Measurement report of the clamping force for extra charge
18
Embed
Bar Feed Collets Workpiece Clamping - iSwiss Toolsiswisstools.com/wp-content/uploads/2017/06/barfeeder_collets-web.pdf · Bar Feed Collets Workpiece Clamping Technical Information
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
10Bar Feed Collets Workpiece Clamping
Technical Information
• Material has to be chamfered• No warranty for thin-walled collets• Diameter of material must not be bigger than the nominal size of collets• Attention: Material could be bigger at the end of the bar. Do not measure in the middle of the bar, only
after the chamfering• Measurement report of the clamping force for extra charge
11Bar Feed ColletsWorkpiece Clamping
Barfeeder Collets For FMB, IEMCA, LNS, TRAUB and TORNOS
- Thin-walled Barfeederer collets also availabe in "Longlife" type - Imperial sizes down to 1/16'' step without an extra charge - Other dimensions available by special order
12Bar Feed Collets Workpiece Clamping
Barfeeder Collets for BECHLER, LNS, TRAUB and TORNOS
Thin-walled barfeeder collets also availabe in "Longlife" type.
Picture 1
Picture 2
13Bar Feed ColletsWorkpiece Clamping
"Longlife" Barfeeder Collets FMB. IEMCA, LNS, TRAUB and TORNOS
Advantages of "Longlife" Barfeeder collets
• Closed form prevents tension loss during high rotation speed• Type "L" also suitable for square / hex material• High breaking resistance and clamping force
Thin-walled Barfeeder collets also availabe in "Longlife" typeImperial sizes down to 1/16'' step without extra chargeAll Barfeeder collets also availabe in XT type (defined clamping force)
To increase the clamping force, springs for most of the collets are available
15Bar Feed ColletsWorkpiece Clamping
"Longlife" Barfeeder Colletsfor Turbo-Barfeeders FMB, BREUNING IRCO, LNS and TORNOS
For Advantages of "Longlife" Barfeeder collets see page 13
* Also available with threads: M17x1 , M25x1.5 , M18x1.5 , M18x1.5L** Also for Stama loadersThin-walled Barfeeder collets also availabe in "Longlife"-type
17Bar Feed ColletsWorkpiece Clamping
Barfeeder ColletsFor P. CUCCHI with Right Hand Thread
CAV Barfeeder collets are also available with an inner profile, or as "Longlife" type by special order
Type L Type LS
21Bar Feed ColletsWorkpiece Clamping
Barfeeder Collets with Inner ProfileSquare and Hexagonal
All standard types of barfeeder collets are available with inner profiled. Outside dimensions are iden-tical to standard types.Advantages for sqr / hex material: Stronger clamping and absolute locking of distortion
Type Magazine Page
D FMB, IEMCA, LNS, TRAUB and TORNOS 7TD FMB, BREUNING IRCO, LNS and TORNOS 10DI IEMCA 12DX P. CUCCHI 15
When ordering simply "VK" or "SK" after the order number
Examples: DX28 26.5 VK (sq) DX42 39.0 SK (hex)
22Bar Feed Collets Workpiece Clamping
Barfeeder Cone Collets for FMB. IEMCA. LNS. TRAUB. TORNOS
All "Longlife" steel types also available vulcanized
Advantages:1. Available for all types of magazine bar loaders2. Longer life (with chamfered bars)3. Excellent noise and vibration damping4. High pull out strength5. Also usable for hexagonal material6. No more problems with loss of coolant7. Only small oversize to the nominal diameter
When ordering add "V" after the order number Examples: D26L 24.5 V
TD45L 43.0 V
Barfeeder Collets for Internal GrippingVulcanizedAll steel-type Barfeeder collets for internal gripping also available vulcanized
Advantages:1. Available for all types of magazine bar loaders2. Excellent noise and vibration damping3. High pull out strength4. No more problems with loss of coolant5. Only small oversize to the nominal diameter
When ordering add "V" after the order number Examples: D26SP 20.0 V
TD45SP 35.0 V
27Bar Feed ColletsWorkpiece Clamping
Rubber-Fix Barfeeder Collets and Collets for Internal Gripping (Blank)
Available for the most types of magazine barfeeders
Advantages:
1. Excellent noise and vibration damping
2. High pull out strength
3. Also useable for hexagonal material
4. No more problems with loss of coolant
5. Larger clamping range. about 0.5 mm
6. No loss of gripping power with high centrifugal forces
7. Also available as emergency version for sizing by customer
8. No scratching of sensitive surfaces (jewelry + medical technology)
Other dimensions available by special orderRebored / turned on measure: priced like standard versionWhen ordering, simply add the nominal size after the Part # Example: TD32G 10.0