Bandwidth & Applications - Siemon 7 Cable • S/FTP fully shielded cable (Shielded with foil twisted-pairs) • 4-pair, 22 AWG • 8.5 mm (.330 inch) nominal OD • Shielding virtually

TERATM Talk:

Bandwidth & Applications

Agenda• What is category 7?

– Media overview

– Positioning

– Product features

• Cable sharing

• TCO/ROI models

• Supporting materials

– Reference sites

– Marketing materials

Part I: Category 7 Cabling

What is it and why should I consider using it?

What is Category 7?• Channels are constructed from fully shielded category 7

components and are classified as class F or class FA

• Highest performing grade of twisted-pair cabling

• Supports maximum return on investment (ROI)

• Offers best-in-class EMC performance

• Two grades of class F cabling constructed from category 7 components are recognized:

– Class F: Specified to 600 MHz

– Class FA: Specified to 1000 MHz (1 GHz)

What is Class F?

• Ratified in ISO/IEC 11801, 2nd Edition in September, 2002

• Targeted for operation of high speed data applications beyond 10GBASE-T and low frequency (< 600 MHz) broadband video

• 600 MHz rated cables are specified by the Standards

• Siemon’s TERATM connector is rated to 1.2 GHz and complies with Siemon 600 MHz and 1000 MHz class F cabling solutions

What is Class FA?• Additional requirements specified in ISO/IEC 11801,

Amend. 1 (pending publication)

• Targeted for operation of high speed data applications beyond 10GBASE-T and all frequencies (up to 862 MHz) of broadband video

• 1000 MHz rated cables are specified by the Standards

• Siemon’s TERATM connector is rated to 1.2 GHz and complies with Siemon 1200 MHz class FA cabling solutions

Siemon Solutions – AsiaPac Markets• Siemon offers two ISO ‘11801 class F compliant solutions:

– Siemon’s LS0H rated 600 MHz cable and TERATM connector and cords

– Siemon’s LS0H rated 1000 MHz cable and TERATM connector and cords

• Siemon offers one ISO ‘11801 Amend. 1 class FA compliant solution:

– Siemon’s LS0H rated 1200 MHz cable and TERATM connector and cords

Positioning Class F and Class FAPerformance 600 MHz 1000 MHz 1200 MHz

ISO ‘11801 Class F F FA

TEMPEST level Performance N Y Y

Supports CATV Channels 2 to 78

(5 MHz to 446 MHz) Y Y Y

Supports CATV UHF Channels

(470 MHz to 862 MHz) N Y Y

Positioning

Minimally compliant

system

Primary TERA solution:

provides full video support

Highest performing: BCT and FA complaint

Overview of TERA™ cabling systems

• Offers more than twice the Shannon channel capacity of category 6/class E cabling

• Supports both PoE and PoE Plus• Supports cable sharing• Increased security due to shielding• Superior EMI/RFI for use in noisy

environments (ie. radiology, govt.)

• Virtually immune to alien crosstalk and internal crosstalk• Guaranteed to support 10GBASE-T since 1999• Supports a 15-year lifecycle

Category 7 Cable• S/FTP fully shielded cable (Shielded with

foil twisted-pairs)

• 4-pair, 22 AWG

• 8.5 mm (.330 inch) nominal OD

• Shielding virtually eliminates crosstalk between pairs and between cables

• Smaller than max. allowed cat 6A cable

• Versions (LS0H):

– 600 MHz F/FTP

– 1000 MHz S/FTP

– 1200 MHz S/FTP

Tinned copper braid

Aluminum/ polyester foil tape

Jacket

Conductor

Insulation

Category 7 Connectivity: TERATM

• Characterized to 1.2 GHz - suitable for use in class F and class FAchannels

• Mechanical and electrical features specified in IEC 61076-3-104:2002

• Commercially supported by 5 manufacturers

• Easy field termination and testing

Ethernet Patching

• Category 7 outlets connect to RJ-45 Ethernet applications using 4-pair hybrid cords

• The RJ-45 plug is screened

• Classes 7 is compatible and interoperable with all existing applications

TERATM Plug and Jack Features1. Plug ID

2. Fully shielded

3. Shielded termination

4. Compact design

5. Hinged door

6. Quadrant isolation

7. Standards compliant interface

Work Area and Closet Solutions

• International faceplate options• Dust cover identifies

individual pairs• Front/rear faceplate installation• Angled, flush, surface (WA), and

rack mount (closet) options• Shares panels and faceplates

with Siemon category 5e, 6, and 6A products

• Side stackable (compact/high density) – up to 6 ports at WA• Same footprint as an RJ-style interface

EMC – Passes Government TEMPEST Testing

• Electromagnetic compatibility EMC)– The ability to minimize radiated emissions– The ability to resist interference from

radiation• Screens and shields inherently protect against

radiation and emissions• TEMPEST refers to a US government classified

set of emissions limits and test procedures• It is a counter-intelligence measure to prevent

electronic espionage• Class F/FA systems featuring the TERATM

connector are the only cabling solutions that are TEMPEST approved

Grounding Recommendations– Siemon’s Class F and FA cabling solutions feature a quick and

easy grounding method

– A dc ground shall be provided at one end of the cabling only

– The TERATM solution automatically grounds the cable shield to the terminating patch panel when the connector is inserted into the patch panel

– The panel is grounded via a 6 AWG ground wire to the TGB

TERATM Home Cabling• Chosen as the primary interface within ISO/IEC 15018, “Information

Technology — Integrated Cabling Systems for Homes”

• TERA is the only connector for use in all three ISO/IEC recognized home cabling applications:

information and communications technology (ICT),

broadcast communications technologies (BCT) and

commands, controls and communication in buildings (CCCB)

• TERA is the only balanced copper connector specified by the ISO/IEC home cabling standard to support BCT

TERA Video Applications• 1-pair application

• NEXT loss not critical

• Insertion loss and return loss most important

• TERA to CCTV baluns

• TERA to CATV baluns

• Consolidation points and amplifiers can increase distance

• CATV Service: Channels 2 to 78 over frequencies 5 MHz to 446 MHz

• CATV UHF: 470 MHz to 862 MHz

Siemon Video Balun Solutions• CATV solutions

– TERA Video Balun Cord– CATV balun– CATV splitter / balun panel

• CCTV solutions– CCTV balun

• Audio / Video solutions– Component video balun– Composite video balun

• TERA T1U4V (1 pair UTP to RJ45) patch cord

Termination Practices

• Quick termination with familiar tools — TERA™ CPT cable prep tool

• Accurately strips jacket and foil from 4-pair S/FTP cable without damaging the conductors

• TERATM features a pair template to aid cable preparation

• Termination video available at www.siemon.com

Installation Practices• Shielded cables require a larger bend radius (e.g. 4-pair needs

50 mm or 2 inches)

• Grounding/bonding required at ER/TR

• Pathways and termination housings need to accommodate bend radius requirements 50mm

75mm(While maintaining the recommended50mm bending radius for 4pr shielded

cable. Note: Cable bend can commencewithin the boot due to flexible housing)

Mounting OptionsNew mounting options to reduce mounting depth to 50 mm/2 in or less to accommodate shallow pathways

• Angled CT Adapter– Snaps into any CT opening– Provides angled TERA work area solution– Also angles back end to reduce mounting depth

• TERA Outlet with Flex Boot– New outlet version with angled boot – New termination practice to remove jacket section– Enables 90 degree bend of TERA cable

Options for Surface MountingNew surface mount outlets support the TERA™ connector and a

50 mm/2 inch bend radius

50 mm bend radius per

ISO ‘11801 requirements for cables > 6.0 mm

Field Testing

• Field testing methods similar to category 6

• Fluke’s DTXCableAnalyzer is approved for validation of TERATM

cabling

Part II: Cable Sharing

A Recognized Solution for High Density, Low-Speed Applications

High Density Work Areas• Up to 15 outlets per WA are

required for some end-user applications!

– Call centers

– Fax centers

– Class rooms

– Training centers

– Monitoring facilities

– Patient recovery rooms

Analog Voice 1-pair VoIP 2-pairs Video over IP 2-pairs CATV 1-pair

w/balun CCTV 1-pair

w/balun 10/100BASE-T 2-pairs

Is Cable Sharing Allowed? Yes!• TIA

– Not specifically excluded– Annex B provides guidance on shared sheath multipair UTP

cables• ISO/IEC 11801 (Commercial)

– Clause 9.3 provides crosstalk consideration for cable sharing– Guidance provided for minimizing sheath sharing incompatibilities

• ISO/IEC 15018 (Home)– Cable sharing may be considered when pathway space is limited

• Using fully-shielded cables alleviates all concerns

Typical Scenarios:• One TERA™ replaces three Cat 5e/6

outlets assuming– 10/100BASE-T data (2-pair)– voice (1-pair)– Fax or video (1-pair)

• One TERA replaces four analog voice outlets– Perfect for call or fax centers– Uses MuTOA or SM Box for workgroup

• Can result in reduced conduit fill• Reduces the number of outlets at the WA• Can reduce faceplates at the WA

Applications – Cable Sharing

10/100 LAN10/100 LAN

VideoVideo

VoiceVoice

Category 7 Supports Convergence• Application sharing is a cost effective

means to replace coax and 18AWG with balanced cabling

• Ethernet supports:

– BAS, Video, Audio and Data!

• Cable sharing is an ideal solution for low-speed, high-density solutions:– Reduced cost– Reduced conduit fill– Improved cable management

Recommendations• Plan to accommodate

1000BASE-T and 10GBASE-T data applications that utilize all 4-pairs

• Provide at least one dedicated 4-pair augmented category 6A or category 7 port per work station

Part III: TCO/ ROI Models

Total Cost of Ownership:Siemon’s TERATM

Class F and FA Cabling Systems

Sample TCO

• Based on twenty-four 2-connector channels• 50 meter average link length and 3 meter patch cords at each

end• $25/hour installation labor• Based on LSOH cable pricing • Not including overtime

Initial Installed Costs

• The predicted 10-year installation life cycle of category 6 cabling is half over• 10GBASE-T ready Category 6A cabling will provide 10 years of useful life• Class F and Class FA TERA cabling is capable of supporting speeds

beyond 10 Gbps

Installed CostLifecycle of

SystemPer Channel

Avg.Annualized

Cost$1,830.92 5 $76.29 $366.18$2,306.42 7 $96.10 $329.49$3,777.70 10 $157.40 $377.77$3,471.34 10 $144.64 $347.13$5,012.14 15 $208.84 $334.14TERA - Class F/Cat 7

Cat 5e/Class D UTPCat 6/Class E UTP10G 6A UTP10G 6A F/UTP

Chart of Annualized Costs

$0.00$200.00$400.00$600.00$800.00

$1,000.00$1,200.00$1,400.00$1,600.00$1,800.00$2,000.00

Dollars

Cat 5e/C

lass D

UTP

Cat 6/C

lass E

UTP

10G 6A U

TP10

G 6A F/UTP

TERA - Clas

s F/C

at 7

Category of Cabling System

Annualized Cost Comparison

Initial InstallAnnualized at 1GAnnualized at 10G

TCO Conclusions

• 10Gbps over copper is a reality• Category 5e is not a good investment for new installations• Augmented category 6 (Siemon 10G 6A UTP and F/UTP)

provides much better TCO/ROI compared to category 6 UTP

• TERA is the highest performing copper cabling system with excellent TCO/ROI

• Cable sharing offers even better TCO/ROI• Siemon offers the most comprehensive suite of 10 Gbps-

ready cabling options

Data Center Manager Poll

Category 5e 6.3%Category 6 9.4%Augmented Category 6 31.3%Class F/Category 7 50.0%Fiber only 3.1%

If you were to build a data center today, what cabling system would you use?

Data Center Decisions Conference 2005 – 300+ Data Center Managers and CIO’s Globally

Part IV: Supporting Materials

Siemon’s TERATM

Class F and FA Cabling Systems

Global Reference Sites• Education

– Lincoln Land Community College (US)• Converting entire campus to TERA over next two years. Using “high

performance network” message to differentiate school from others. Brief available at Siemon.com

– Universita’ Degli Studi Di Parma (IT)• Upgrade to network of two campus buildings. On a tight budget, they

needed a creative solution to support high a performance data network as well as improve voice capabilities. Brief available at www.siemon.com

• Finance –• Government –• Healthcare –

– Delray Medical Center (US) –• Needed a future-proof solution for data transfer needs as well as

providing the large file transfer capabilities and EMI resistance necessary in medical imaging applications Study available at Siemon.com

Global Reference Sites, cont.• Industrial / Manufacturing –

– Alberici HQ (US) –• 1500 ports installed in world’s “greenest” building. TERA’s extended

lifecycle reduced future cble removal/disposal needs (case study pending)

– Suddekor (DE/US) –• Printing facility chose TERA for large file transfer, high EMI

resistance and future-proofing. Study available at siemon.com• Data Centers –• Retail –

ConclusionSiemon's TERA class F solution is the highest performing and most secure copper cabling system with the best Total Cost of Ownership (TCO). TERA cable sharing offers even greater cost savings in multi-application environments.

TERA is a globally recognized interface and Siemon is the global market share leader for class F and class FAcabling solutions.