Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]REV. B M174392 EDR-9028AU BPF-A127+ URJ/RAV 190611 Page 1 of 1 50Ω 118 to 137 MHz Maximum Ratings Operating Temperature -40 o C to 85 o C Storage Temperature -55 o C to 100 o C RF Power Input* 0.5W at 25°C RF IN 1 RF OUT 8 GROUND 2,3,4,5,6,7,9,10,11,12,13,14 Pin Connections Surface Mount BPF-A127+ Bandpass Filter Typical Performance Data at 25 o C CASE STYLE: HQ1157 Features • High rejection • Good VSWR, 1.3:1 typ @ passband • Shielded case • Aqueous washable Applications • Military communications • Harmonic rejection • Transmitters/receivers Bandpass Filter Electrical Specifications (T AMB = 25 O C) Typical Frequency Response Functional Schematic F6 F4 F2 F1 F3 F5 40 20 4.5 ATTENUATION (dB) FREQUENCY (MHz) Outline Drawing Frequency Insertion Loss VSWR (MHz) (dB) :1) 1 80.41 38.14 95 55.33 73.96 105 32.61 26.93 110 17.37 8.08 113 8.51 2.15 115 4.29 1.38 118 2.95 1.27 123 2.43 1.17 127 2.40 1.28 130 2.39 1.36 137 2.75 1.19 140 3.38 1.34 142 6.66 1.74 145 11.58 5.39 155 30.62 22.13 180 54.67 57.07 700 92.48 243.05 2200 55.19 68.65 INSERTION LOSS 0 20 40 60 80 100 0 440 880 1320 1760 2200 FREQUENCY (MHz) INSERTION LOSS (dB) 2.2 2.4 2.6 2.8 3.0 118 122 126 130 134 138 VSWR 1 10 100 1000 0 440 880 1320 1760 2200 FREQUENCY (MHz) VSWR 1.1 1.2 1.3 1.4 118 122 126 130 134 138 RF IN RF OUT CENTER PASSBAND STOPBANDS (MHz) VSWR (:1) FREQ. (MHz) (MHz) (Loss < 4.5dB) Loss > 20dB Loss > 40dB Passband Stopband Fc F1 - F2 F3 F4 F5 F6 Typ. Max. Typ. 127 118 - 137 105 155 95 180 - 2200 1.3 1.7 20 Permanent damage may occur if any of these limits are exceeded. *Passband rating, derate linearly to 0.25W at 100°C ambient. Demo Board MCL P/N: TB-363+ Suggested PCB Layout(PL-227) NOTES: 1. TRACE WIDTH IS SHOWN FOR FR4 WITH DIELECTRIC THICKNESS: .025” ± .002”. COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED. 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER) DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK .048±.002 LINE WIDTH 2 PL. .160 TYP. PACKAGE OUTLINE PIN 1 .365 .180 TYP. .150 TYP. 1.360 .305 TYP. ø.013 PTH TYP. .183 TYP. .120 TYP. Outline Dimensions ( ) inch mm METALLIZATION SOLDER RESIST PCB Land Pattern Suggested Layout Tolerance to be within ±.002 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Note: Please refer to case style drawing for details Generic photo used for illustration purposes only A .365 9.27 B 1.360 34.54 C .35 8.89 D .100 2.54 E .180 4.57 F .140 3.56 G .100 2.54 H .100 2.54 J .305 7.75 K .150 3.81 L .120 3.05 M .275 6.99 N .152 3.86 P .405 10.29 Q 1.400 35.56 Wt. grams 4.0
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NotesA. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
-40°C @ Input Power = 0 dBm +25°C @ Input Power = 0 dBm
+85°C @ Input Power = 0 dBm
REV. X1BPF-A127+
091217Page 2 of 2
HQ1157 Rev.: G (26/06/18) M175063 File: HQ1157.doc Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.
Case Style HQ
SOLDER RESIST
METALLIZATION
A
B
C MAX
D E
H G F
J K
INDEX
1
2 3 4 5 6 7
8
91011121314
1
2 3 4 5 6 7
8
91011121314
G
K
L
M
N
P
QSuggested Layout,
Tolerance to be within ±.002
PCB Land Pattern
CASE# A B C D E F G H J K L M
HQ1157 .365
(9.27) 1.360
(34.54) .350
(8.89) .100
(2.54) .180
(4.57) .140
(3.56) .100
(2.54) .100
(2.54) .305
(7.75) .150
(3.81) .120
(3.05) .275
(6.99)
CASE# N P Q WT.GRAM
HQ1157 .152
(3.87) .405
(10.29) 1.400
(35.56) 4.0
Dimensions are in inches (mm). Tolerances: 2Pl. ± .03; 3Pl. ± .015
Outline Dimensions Outline Dimensions HQ1157
Notes: 1. Case material: Nickel-Silver alloy. 2. Base: Printed wiring laminate. 3. Termination finish: For RoHS Case Styles: 3-5 µ inch (.08-.13 microns) Gold over 120-240 µ inch (3.05-6.10 microns) Nickel plate. For RoHS-5 Case Styles: Tin-Lead plate.
98-TR-F83 Rev.: A (08/14/09) M124108 M107182 File: 98-TR-F83.doc Sheet 1 of 1
This document and its contents are the property of Mini-Circuits.
Tape & Reel Packaging TR-F83
Tape Width,
mm
Device Cavity
Pitch, mm
Reel Size,
inches
Devices per Reel
56 16 13 100
Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling
and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541.
Go to: www.minicircuits.com/pages/pdfs/tape.pdf
Mini-Circuits Environmental Specifications
All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test.