This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Ballet tables form a versatileseries that provides solutionsin a variety of applications—conference, training, work-place, dining, and utility. Baseconfigurations are available infolding and fixed versions.
Modesty panel has a horizon-tal wire management troughfor a clean look.
Cast aluminum legs are avail-able in folding or non-folding,X- and K-bases.
Adjustable leveling glides areincluded for uneven floors.
Top is 1" thick laminate orstraight grain wood veneer.
Seating Capacity GuidelinescSee page 157
Coalesse Training/Multipurpose Tables Specification Guide cBallet, continued 151
Casters can replace glides onmany Ballet tables factoryinstalled. Casters are 2"-diam-eter, locking dual-wheel cast-ers in black plastic and do notalter the table height.
Edges are black ribbed vinylwith matching plastic cornerinserts or Ballet wood edge.
Custom shapes and sizesSpecial table sizes andshapes are possible. To con-firm practicality and obtain aquotation, contact CustomerService at 1.800.627.6770.
Cut-down tops, which arestandard table tops withsmaller dimensions, are avail-able. Use the product numberof the next larger size andspecify the exact dimensionsyou want. Some restrictionsapply, including minimumquantities. This option is notavailable for folding tables.Additional lead times may berequired. Contact Coalessecustomer service at972.641.2860. The followingupcharge applies to cut-downtops, +$373 U.S.Tip: Upcharge for a cut-downtop is applied one time only persize/style number.Tip: Fee is at list and contractdiscounts apply.
Woodgrain laminates arealways oriented with the graindirection running parallel withthe length of the table top. Youcannot specify woodgrain laminates with end- or side-matched grain directions.
Laminate Woodgrain Direction
12'
Vinyl
Wood
Wood edges are not recom-mended on tables with wood-grain laminates becausematching of woodgrain lami-nate and natural, solid wood isnot guaranteed. For tables withwood edge profiles, alwaysspecify either laminates insolid colors or patterns orwood veneer surfaces.Tip: Because of natural varia-tions finished solid wood edgesmay vary slightly in tone orcharacter from each other orfrom the samples Coalesse produces. No guarantee can bemade of an absolutely exactmatch.
Standard veneer grain direc-tions–grain directions aredetermined by the size andshape of the table top. Refer tothe following guidelines forstandard grain directions.
Woodgrain runs parallel to thelength on rectangular and boattops that are 96"L or less.
Grain-matched veneer isavailable at an upcharge incases where you want thegrain direction and pattern tocontinue from one top to anadjacent ganged top. Coalessecan accommodate the continu-ation of veneer grain from oneganged top to the next inalmost all arrangements, usingone of three types of match-ing—end-matched, side-matched, and end-and-sidematched.
Same flitch veneer is alsoavailable for tables that requiresimilar graining and color, butwill not be ganged. For exam-ple, specify same flitch veneerfor two tables used in thesame room, but spaced apart.
Additional lead time may beneeded for grain-matchedveneers. Contact CustomerService at 1.800.627.6770 todiscuss availability.
96"L or smaller
Always include a drawing orsketch along with your specifi-cation showing the arrange-ment of tables you plan so thatwe can ensure proper grainmatching.
Specifying grain-matchedveneers requires an upcharge.Same flitch, end-matched,side-match are 10% of the total list price. End-and-sidematched are 20% of the totallist price.
Same flitch matching is spec-ified in cases where you wantthe veneer grain and patternon two or more tops to comefrom the same flitch of veneer.This ensures a consistentgrain pattern and colorationand should be specified whentops will be used near eachother but not ganged.
Swatch cards and actualsamples of Coalesse stan-dard wood veneers are avail-able from your Coalessecustomer service representa-tive.
Additional wood veneerspecies are available. To con-firm availability and to deter-mine pricing, contact CustomerService at 1.800.627.6770.
Solid core tops with 3⁄4" and1" edge thickness have a coreof 45 lb median-density parti-cle board with laminate orstraight-grain wood veneer onthe top and a backer applied tothe opposite side for balance.Laminate and wood veneersurfaces are bonded to thecore with a PVA adhesive in acold press.
Flip-top option is available onpedestal base tables only.
Flip-top mechanism is avail-able on pedestal base tables36"D or less. The flip-topmechanism allows tops to tiltfor more compact storage oftables that are not in use.Safety latch secures the top inflat position and must bereleased to flip top up.Tip: Flip-top tables are notmeant to be used in configura-tions. Tops may not align.
Special table heights may bepractical. To confirmpracticality and obtain a quota-tion, contact Customer Serviceat 1.800.627.6770.
Folding is possible for selectX-base and K-base tables toallow compact storage oftables that are not in use. BothX-base and K-base are 4" thickwhen folded. Folded height is35⁄8".
Backer
Laminateor Veneer
Core
Product Details
Cart is available in two sizes tostore and transport five foldedBallet tables.
Bases are available in threeconfigurations—X-base, K-base, and pedestal base. Baseassemblies are constructed ofdie-cast and extruded alu-minum. X-base and K-baseassemblies are joined by 1" x 3" extruded aluminumstretcher bar for stability. Basefinish can be any powder coatcolor.
Base inset on Ballet K-basetables is 31⁄2".
Base inset on Ballet X-basetables is 10" on tables 60"Land 13" on tables longer than60"L.
Table height is standard at281⁄2"H.
Adjustable leveling glides arenon-marring, black plastic.
Grain directions are designated in relation to the dominatedirection of the veneer—often referred to as the cathedral of theveneer. End-matched veneer refers to two pieces of veneer thatmatch at the end of the cathedral. Side matched veneer refers totwo pieces of veneer that match along the side of the cathedrals.
End-matched veneer is specified on tops that will be gangedwith the edges that are perpendicular to the grain directionbutted against each other.
On most tables that are 72"L x 30"W, the veneer grain directionwill be parallel to the 72" side. If you specify end-matched, theveneer grain on one 30" side of one table will continue on one30" side of the adjacent table.
Side matched veneer is specified on tops that will be gangedwith the edges that are parallel to the grain direction buttedagainst each other.
30"
72"
End
CathedralS
ide
On most tables that are 72"L x 30"W, the veneer grain directionwill be parallel to the 72" side. If you specify side-matched, theveneer grain on one 72" side of one table will continue on one72" side of the adjacent table.
End-and-side matched veneer is specified when several topswill be ganged along two or more edges.
• 1" Ballet vinyl • Available • Available • Available • Available • Available • Available • Available• 1⁄8"D profile with square with square with square
• 1" Ballet wood • Available • Available • Available • No • No • No • No*Not available with square with squareon 27" side corners only corners onlytable on non-folding on non-folding
tables tables
36"x96"36"x96"36"36"
Edge Alternatives
Coalesse
Ballet
Coalesse Training/Multipurpose Tables Specification Guide cBallet, continued 153
Flex gangers use a flexible loop that engages a hook to holdtwo adjacent table tops in place. No tools are required to stretchthe loop across the seam between two table edges and to con-nect it to the hook on the adjacent table. Loops that are not inuse can be secured to a parking hook.
Gangers and hooks are installed on the sides of the tables thatare going to be joined. You can specify end-to-end, side-to-side,or end-and-side arrangements.Tip: Not recommended for ganging table tops with wood self edges.
Field-installed flex ganger packages are available to add onsite to tables with vinyl edges or self-edged tables with tops thatare 1"- to 11⁄4"-thick. Specify one package for each seam.
Flex Ganger Style List Price
Package Number U.S. Canada
Flex ganger for 793365L $66 $69Ballet tables only(not for side-to-side ganging)
Tip: Not recommended for ganging table tops with wood edges.
Bar gangers use steel bars to join adjacent tables. One end ofthe bar is captured by the host table and allows the bar to pivotbeneath adjacent table where it is captured by a threaded postwith knob. Factory-installed threaded insert in underside of tabletop accepts the threaded knob. No tools are required to linktables with bar gangers.
Bar ganger
30x60Rizzi
End-to-end
Hooked
Parked
Factory-installed bar ganger inserts are standard on all rec-tangular Ballet tables to allow tables to be joined end-to-endand/or side-to-side. Threaded inserts are available as an optionon Ballet tables with vinyl or self edges. Specify universal gang-ing when you order your tables. You must also order the appro-priate number of ganger packages separately. Order onepackage for each pair of table edges that are going to be joined.Tip: Please send a drawing of your arrangement along with yourorder to ensure that gangers are properly installed.Tip: Not recommended for ganging table tops with wood edges.
Bar ganger packages are available.
Bar Ganger Style List Price
Package Number U.S. Canada
Bar ganger for 793335 $42 $44
11⁄4"-thick tops
Tip: Not recommended for ganging table tops with wood edges.
If your tables are going to be used in a configuration thatrequires ganging, please send us a drawing or sketch so that wecan give you exactly what you want.
30x60Rizzi
End-and-side (Not available on tables with modesty panels.)
30x60Rizzi
Side-to-side (Not available on tables with modesty panels.)
Connecting tops can link per-pendicular Ballet tables at 45°,60°, or 90° and expand theuseable area in many differentconfigurations.cSee page 178
Modesty panel is available onmany Ballet tables. Panel isribbed extruded aluminum withpowder coat color and includesa non-exposed horizontal wiremanagement trough.cSee individual product speci-fication pages for availability.
Gangers are available in twotypes—flex and bar. Use flexgangers in situations whentables will frequently be recon-figured and re-ganged. Use bargangers in applications wheretables need to be rigidly linkedfor long periods of time. Flexgangers may be installed in thefactory or on site. Threadedinserts for bar gangers arealways factory installed. Bargangers are field installed.
Flex gangers can be used toeasily link adjacent rectangu-lar, trapezoid, and D-shapedtables in multiple configura-tions. Flex gangers use a flexi-ble loop that engages a hook tohold two adjacent table tops inplace. No tools are required tostretch the loop across theseam between two table edgesand to connect it to the hookon the adjacent table. Loopsthat are not in use can besecured to a parking hook. Tip: Modesty panels would pre-vent gangers from being used onthat side of the table.
Sphere has 3"-diameter opening. Dimensions given are fromcenter of opening and are accurate within 1⁄4" left, right, andcenter are from the user’s perspective. Additional locations arepossible. Contact Customer Service at 1.800.627.6770.
Ballet K-Base (Spheres) A B C20"W 48" 31⁄2" 81⁄2" 24"
Ballet X-base spheres are available for field installation. Tospecify, order the sphere and the table as separate items.Custom locations are possible.
Tip: Custom locations are possible. Custom locations require anengineering review to confirm practicality. Please send a drawing toyour customer service representative to show the locations youwant, confirm practicality, and obtain a quotation.
Please send a drawing of your arrangement along with yourorder to ensure that grommets and spheres are properlyinstalled.
Vertical wire manager isavailable to clip on to Ballettable leg to conceal powercords and voice/data cablesrouted vertically from the floorto the worksurface. Verticalwire manager is black plastic.cSee page 179
Technology spider is a cable-management version of thetraditional spider that is usedto attach a table top to a col-umn. The spider providesclearance for power cords andvoice/data cables to passthrough the table top so thatInterport modules, grommets,and spheres can be positioneddirectly above a table base.
Grommets are available fac-tory installed. Locations arelisted in the table below (left,right, center).
Field installation available. Tospecify, order the grommetand the table as separateitems.
Grommet has 2"-diameteropening. Dimensions given arefrom the center of opening andare accurate within 1⁄4". Left,right, and center are from theuser’s perspective.
Wiring & Cabling
Ballet K-Base (Grommets) A B C20"W 48" 31⁄2" 81⁄2" 24"
Ballet X-base grommets are available for field installation. Tospecify, order the grommet and the table as separate items.Custom locations are possible.
Spheres are available factory installed (left, right, center).Locations are listed in the table to the right.
Four simplex power outlets
Two simplex power outletsand two data jack locations
Four data jack locations
Field-installed sphere is practical on many table tops. Orderunit separately and cut the required hole in the table top on site.Installation instructions will be shipped with the sphere.
B
A
Left Center
User's Edge
Right
B
C ...............................................................................................................................................
Coalesse Training/Multipurpose Tables Specification Guide cBallet, continued 155
Interport and Mini-Port areavailable factory cut in customlocations. This processrequires engineering reviewand additional lead time may be required. Tip: Send us a drawing indicating desired location(s). An additional charge may applyif the standard table designrequires modification. Interport and Mini-Port arealso available for field installa-tion. To specify, order theInterport or Mini-Port and thetable as separate items.cSee page 53 for additionalinformation on Interport orMini-Port.
Interact is available factory cutin custom locations. Thisprocess requires engineeringreview and additional lead timemay be required. Tip: Send us a drawing indicating desired location(s). An additional charge may applyif the standard table designrequires modification. cSee page 60 for additionalinformation on Interact.
Power strips are available asan accessory, ordered separately.
Juice requires engineeringreview and additional lead timemay be required. Juice is fieldinstalled and ordered separately.cSee page 44 for additionalinformation on Juice.
Laminates are available in twostandard grades. Additionallaminates from any manufac-turer may also be practical—see below.
Grade 1 laminates include:• Coalesse standard laminatescSee Surface Materials Listing,page 350.• Steelcase standard laminates(code 290A)cSee Steelcase SurfaceMaterials Reference Manual.• Any standard-gradeWilsonart laminate in solidcolor, woodgrain, or patternfinish (code 290A)
Grade 2 laminates (code290B) include any standard-grade, solid color, woodgrain,or patterned laminate fromNevamar (includes Matrix),Formica, or Pionite. Grade 2laminates may have extendedlead times. For details, contactCustomer Service at1.800.627.6770.
Other laminates that are notincluded in the Grade 1 orGrade 2 offerings may also be available, such as AbetLaminati and Laminart. Todetermine availability and pric-ing, contact Customer Serviceat 1.800.627.6770, with thelaminate manufacturer’s nameand the name and number ofthe laminate you want.
Laminate swatches are repro-duced in the Surface MaterialsColor Palettes in the back ofthe book.
Backer
Laminate
Core
Surface Materials Swatch cards and actualsamples of Coalesse stan-dard laminates are availablefrom your Coalesse customerservice representative. Forsamples of laminates fromother manufacturers, contactthem directly:Wilsonart1.800.433.3222Nevamar1.800.638.4380Formica1.800.FORMICAPionite1.800.285.5161Tip: Laminate manufacturerschange their offerings fre-quently. Always check availabil-ity before ordering.
Wood veneer table tops arefabricated with ArchitecturalGrade AA hand-selected hard-wood veneer, plain sliced, bookmatched, and bonded to thecore with a backing sheet forbalance. Coalesse’s primarywood finish, Clarity, is a water-borne UV topcoat, which pro-tects the environment whileproviding exceptional durabilityand resistance to water andchemical stains. Due to naturalvariations in wood, finishedproducts may vary from sam-ples in color, texture, andgrain.
Wood is a natural material;slight variations occur inveneer texture, color, grainconfiguration, and stainacceptance. Coalesse stainsare all applied with an exactingregard for consistency and arewell within traditional toler-ances for wood products. Tip: Finished tops may varyslightly in tone or character fromeach other or from the samplesCoalesse produces. No guaranteecan be made of an absolutelyexact match.
Wood veneer swatches arereproduced in the SurfaceMaterials Color Palettes in theback of the book.cSee Surface Materials Listing,page 350, for a list.
Backer
Veneer
Core
Stains applied to Coalessewood veneer table tops arestandard with the same staincolor applied to both the topand the solid hardwood edgeprofile. Coalesse strives toproduce a consistently highquality product and some natu-ral variation in color is to beexpected. This is especiallyapparent on natural woodswhich have no stain applied,for example 3525 NaturalMaple. This color variation isnormal and reflects the uniqueand natural properties ofwood. This should not be con-sidered a defect.
Stain swatches are repro-duced in the Surface MaterialsColor Palettes in the back ofthe book.
Swatch cards and actualsamples of standard woodveneers are available fromyour Customer Service representative.
Additional wood veneerstains are possible. Coalesseoffers two programs toaccommodate customers whoneed special stains—Stain-to-Match and Stain and Finish toMatch.
Stain-to-Match option is aspecial Coalesse program thatwill match a wood stain sam-ple that you provide. There isno additional charge for thisservice. You must supply asample of reasonable size (3" x3" or larger is usually ade-quate). Coalesse will formulatea stain, produce a matchingsample, and send it to you forapproval. When we receiveyour written approval, we’llschedule production of yourorder.Tip: Stain-to-Match will achievea color match to the sample only.Graining of the wood veneer andfinal surface finish may differfrom your original sample.
Stain and Finish to Match is aspecial Coalesse program thatcan achieve both a color and asurface finish match for mostcustomer-supplied samples. Todetermine feasibility and pric-ing, send us a sample of rea-sonable size (3" x 3" or largeris usually adequate) before yousend us your order. If feasible,Coalesse will produce a sam-ple showing the best possiblematch and send it to you forapproval. When we receiveyour written approval, we’llschedule production of yourorder.
Stain formulas for specialstain color matches are allretained in Coalesse’s archivesso that you can refer to themin future orders and skip theapproval steps required for theinitial order.
Table bases are available withtextured powder coat colors.Refer to the individual productspecifying pages for availabil-ity. Powder coat colors areshown in the Surface MaterialsListing, page 350.
Laminate and solid phenolicshould be cleaned with soapand water. For stubbornstains, use a non-abrasivehousehold cleaner.
Veneers should be cleanedregularly with mild soap andwater and dried with a softcloth. To polish, use silicone-free household polishers. Use sparingly.Tip: Never use ammonia-basedcleaners or wax on wood surfaces.
Powder coat finishes ontable bases should be cleanedwith a liquid detergent andwater. Remove stubborn stainswith liquid cleanser, such asFormula 409.
Polished aluminum finisheson table bases should becleaned with a commercialpowder, liquid, or paste metalcleaner and polish. Follow themanufacturer’s directions.
Tables should be inspectedand maintained regularly bytightening screws and bolts,inspecting casters and glidesfor damage, and inspecting allmoving parts for damage andwear.
Care & Maintenance...............................................................................................................................................
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Tip: You must send a sampleof reasonable size for Stain-to-Match.
Tip: For installation of agrommet or sphere, submit adrawing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Tip: Shipped knocked down.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Standard Includes Required to SpecifyTip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: When specifying glidesheight of table does not change.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: 3⁄4" particle board core with laminate • Edge: black ribbed vinyl• Base: 2" diameter steel column and 4-prong cast
aluminum feet with single powder coat • 19" cast aluminum technology spider• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate or wood color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
Flip top • Flip top on tables 36" or less +$141 Add suffix F to the style number.cPage 151
Casters • 2" diameter, locking, dual-wheel +$124 Add suffix C to style number.cPage 151 casters in place of leveling glides:
black plastic
Dimensions Style Finish U.S. Base PricesDia H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30" 281⁄2" 933421 Grade 1 Laminate $ 647 $1367
Grade 2 Laminate $ 672 $1392
Grade 1 Wood Veneer $1134 $1854
Grade 2 Wood Veneer $1232 $1952
36" 281⁄2" 934421 Grade 1 Laminate $ 719 $1525
Grade 2 Laminate $ 754 $1560
Grade 1 Wood Veneer $1265 $2071
Grade 2 Wood Veneer $1405 $2211
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Special table height avail-able, call customer service forquote.
Tip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: If you specify a wood edgeon a top with woodgrain lami-nate, the edge and top may notmatch.
Tip: When specifying castersheight of table does not change.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Flip top • Flip top on tables 36" or less +$141 Add suffix F to the style number.cPage 151
Casters • 2" diameter, locking, dual-wheel +$124 Add suffix C to the style number.cPage 151 casters in place of leveling glides:
black plastic
Dimensions Style Finish U.S. Base PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30" 30" 281⁄2" 926421 Grade 1 Laminate $694 $1567
Grade 2 Laminate $719 $1592
Grade 1 Wood Veneer N.A. $2076
Grade 2 Wood Veneer N.A. $2174
36" 36" 281⁄2" 927422 Grade 1 Laminate $759 $1680
Grade 2 Laminate $794 $1715
Grade 1 Wood Veneer N.A. $2294
Grade 2 Wood Veneer N.A. $2434
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Special table height avail-able, call customer service forquote.
Tip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: If you specify a wood edgeon a top with woodgrain lami-nate, the edge and top may notmatch.
Tip: When specifying castersheight of table does not change.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: For installation of grom-mets, spheres, Mini-Port,Interport, and/or Interact,submit a drawing indicatingthe desired location for a fac-tory installed cutout(s). Fieldinstallation is also available.All require the grommet(s),sphere(s), Mini-Port,Interport, and/or Interact tobe ordered as a separate item.
Tip: Shipped assembled.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: You must send a sampleof reasonable size for Stain-to-Match.
Tip: If you specify a woodedge on a top with woodgrainlaminate, the edge and topmay not match.
Tip: For installation of grom-mets, spheres, Mini-Port,Interport, and/or Interact,submit a drawing indicatingthe desired location for a fac-tory installed cutout(s). Fieldinstallation is also available.All require the grommet(s),sphere(s), Mini-Port,Interport, and/or Interact tobe ordered as a separate item.
Tip: Shipped knocked down.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: 1" multi-ply wood core with laminate • Edge: black vinyl with matching plastic corner inserts• K-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat • Modesty panel with horizontal wire management trough,
if selected: extruded aluminum with powder coat • Threaded inserts in underside of top for end-to-end
ganging• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Powder coat color number for
modesty panel, if selected5 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices at right Specify with Grade 2 laminate and select
laminate color number.
Grommets • One grommet: black plastic +$ 60 Specify with grommet and select location of cPage 154 left, right, or center.
• Two grommets: black plastic +$120 Specify with two grommets and select location of left/center, right/center, or right/left.
• Three grommets: black plastic +$180 Specify with three grommets.
Spheres Factory-installed opening andcPage 154 sphere to be installed on site:
black plastic only• CSP = Four data jack locations +$153 each Specify with CSP sphere and select location
of left, right, or center. • PCS = Two simplex power outlets +$232 each Specify with PCS sphere and select location
and two data jack locations of left, right, or center. • PSP = Four simplex power +$338 each Specify with PSP sphere and select location
of left, right, or center.
Casters • 2" diameter, locking, dual-wheel +$ 55 Add suffix C to the style number.cPage 151 casters in place of leveling glides
on back legs of tables that are72"L or less: black plastic
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
• Power strips cPage 179
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: When three grommets arespecified, grommets will belocated left, right, and center.
Tip: For sphere location avail-ability see page 154.
Tip: If RJ11 or RJ45 data jackcouplers are needed on PCSor CSP they must be orderedseparately.
Tip: When specifying casters,height of table does notchange.
Tip: For installation ofInterport, Mini-Port, orInteract, submit a drawingindicating the desired locationfor a factory installed cutout.Field-installtion is also avail-able for Interport and Mini-Port. All require the Interport,Mini-Port or Interact to beordered as a separate item.
Tip: Shipped assembled.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: 1" MDF core with laminate• Edge: black ribbed vinyl with matching plastic corner
inserts • K-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat • Threaded inserts in underside of top for end-to-end
ganging• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices at right Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices at right Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices at right Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Edges Wood• Ballet wood edge Prices at right Specify with Ballet wood edge.
Grommets • One grommet: black plastic +$ 60 Specify with grommet and select location of cPage 154 left, right, or center.
• Two grommets: black plastic +$120 Specify with two grommets and select location of left/center, right/center, or right/left.
• Three grommets: black plastic +$180 Specify with three grommets.
Spheres Factory-installed opening andcPage 154 sphere to be installed on site:
black plastic only• CSP = Four data jack locations +$153 each Specify with CSP sphere and select location
of left, right, or center. • PCS = Two simplex power outlets +$232 each Specify with PCS sphere and select location
and two data jack locations of left, right, or center. • PSP = Four simplex power +$338 each Specify with PSP sphere and select location
of left, right, or center.
Casters • 2" diameter, locking, dual-wheel +$ 55 Add suffix C to the style number.cPage 151 casters in place of leveling glides
on back legs of tables that are72"L or less: black plastic
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
• Power strips cPage 179
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: You must send a sampleof reasonable size for Stain-to-Match.
Tip: If you specify a woodedge on a top with woodgrainlaminate, the edge and topmay not match.
Tip: When three grommets arespecified, grommets will belocated left, right, and center.
Tip: For sphere location avail-ability see page 154.
Tip: If RJ11 or RJ45 data jackcouplers are needed on PCSor CSP they must be orderedseparately.
Tip: When specifying casters,height of table does notchange.
Tip: For installation ofInterport, Mini-Port, orInteract, submit a drawingindicating the desired locationfor a factory installed cutout.Field-installtion is also avail-able for Interport and Mini-Port. All require the Interport,Mini-Port, or Interact to beordered as a separate item.
Tip: Shipped knocked down.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.