This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Figure # Description Page
UPBA100/100S 600 WOG, Threaded End, Bronze Body, Chrome Plated Ball, Standard Port (UPBA100S Stainless Steel Ball & Stem)
UPBBTSCS02L 175 psi, Bronze Body Threaded Ends with Switch UP-52
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Rev. 10/20
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-1Rev. 21
Bronze Ball Valve For Potable WaterTwo Piece
Standard Port (1” - 3”) Full Port (1/4” - 3/4”)600 psig WOG
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
C360009 Handle Steel w/Zinc Plating B63310 Handle Grip Vinyl Commercial11 Handle Nut Steel w/Zinc Plating B63312* Body Seal PTFE Commercial(1) Ball and stem are stainless for UPBA100S(2) Ball and stem are stainless for 2 1/2” & 3” UPBA100
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-2Rev. 10
Bronze Ball Valve For Potable WaterTwo Piece
Standard Port (1” - 3”) Full Port (1/2” - 3/4”)200 psig @ 250°F†Press x Press Ends
Press x Threaded Ends Available (Consult Factory)Blow-Out Proof Stem
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Cv 13 30Note: DN (Diameter Nominal) = Metric equivalent size. Same design as UP8501H/8511H†Non-Shock
Do not pressurize cap.Pressure not to exceed 40 psi.
Rev. 9
Bronze Ball Valve For Potable WaterTwo Piece Full Port600 WOG
Threaded x 3/4” Hose End (UPBA100H)Solder x 3/4” Hose End (UPBA150H)
Dust Cap and ChainBlow-Out Proof Stem
Dimensions and Workmanship Conform to MSS SP-110
UPBA100H/UPBA150H ½” & ¾”Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
Note: Pressure/Temperature rating shown are for VALVE ONLY. Hose side pressure and temperature limit is based on connected hose and is users responsibility
UPBA-150H(SOLDER END)
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Bronze Ball Valve For Potable WaterTwo Piece Full Port
200 psig @ 250°F†Press x 3/4” Hose End
Dust Cap and ChainBlow-Out Proof Stem
Dimensions and Workmanship Conform to MSS SP-110
UPBA100H P1* ½” & ¾”
B
Press End Adapter (4151 Series)
15
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Do not pressurize cap.Pressure not to exceed 40 psi.
Note: Pressure/Temperature rating shown are for VALVE ONLY. Hose side pressure and temperature limit is based on connected hose and is users responsibility
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-5
Bronze Ball Valve For Potable WaterTwo Piece
Standard Port (1” - 3”) Full Port (3/8” - 3/4”)600 psig WOG
C360009 Handle Steel w/Zinc Plating Commercial10 Handle Grip Vinyl Commercial11 Handle Nut Steel w/Zinc Plating Commercial12* Body Seal PTFE Commercial(1) Ball and stem are stainless for UPBA150S(2) Ball and stem are stainless for 2 1/2” & 3” UPBA150
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-6
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Cast Bronze B584 C898332 End Cap Cast Bronze B584 C89833
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
1/4” - 2” sizes 2 1/2” - 3” sizes
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-7
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Cast Bronze B584 C898332 End Cap Cast Bronze B584 C89833
*Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-8
MATERIALS LISTITEM PART MODEL/SIZE MATERIALS ASTM SPEC.
Cv 7 17 31 60 110 185 360 390 390*3” is standard Port. **2-1/2” & 3” Only.
Rev. 14
Bronze Ball Valve For Potable WaterThree Piece
Full Port600 psig WOG
Solder EndsBlow-Out Proof Stem
Dimensions and Workmanship Conform to MSS SP-110
UPBA350/350S ⅜”-3”
**
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
(2) Ball and stem are stainless for 400S.(3) For steam service, specify stainless trim and multi-fil
seats, maximum stem pressure 150.
stainless steel ball and stem for steam applications.Please consult factory for more information.
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438
Seat Material Rating
93
SaturatedSteam
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
(2) Ball and stem are stainless for 400S.(3) For steam service, specify stainless trim and multi-fil
seats, maximum stem pressure 150.
stainless steel ball and stem for steam applications.Please consult factory for more information.
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438
Seat Material Rating
93
SaturatedSteam
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
Press End Adapter.
12
Available with Press x Threaded Ends(Order UPBA400P1/UPBA400SP1)
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
(1) Please consult factory for more information regarding
(2) Ball and stem are stainless for 450S.
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE DATA
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
Body / Seat Material RatingJoint Limits fromASME B16.18 for 95/5 Solder
232
steam applications.
(3) For steam service, specify stainless trim and multi-fil seats, maximum stem pressure 150.
A MILW
AUKEE VALVE PRODUCT
TM
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-12
Brass Ball Valve For Potable WaterTwo Piece
Full Port600 psig WOG (1/4” - 2”)
400 psig WOG (2 1/2” - 3”)Threaded Ends
Blow-Out Proof StemDimensions and Workmanship Conform to MSS SP-110,
BRASS BALL VALVE***
967
4
10
3
5
2
1
8 11
D
E
A
F
"BA-475B" 14 -"/ 4 "
RC US
UL 842UL 125ANSI Z 21.15a CGA 9.1a
ASME B16.44
R
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERPp-
si
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE CHART
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
CB
Seat Material Rating
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Brass, Forged B2832 Tailpiece Brass, Forged B283
1/4” through 2” OnlyAlso Available BA-475B-LL (Locks Only In Closed Position)
THREADED ENDS**
NSF 61
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
12** Backing Ring Plastic Commercial*Ultra Press Valves are designed and qualified for use in cop-per tubing systems only, Types K, L, & M per ASTM B88. For Installatin Instructions please see engineering section on website.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
*Ultra Press Valves are designed and qualified for use in copper tubing sys-tems only, Types K, L, & M per ASTM B88.
Do not pressurize cap.Pressure not to exceed 40 psi.
Rev. 12
Brass Ball Valve For Potable WaterTwo Piece Full Port
200 psig @ 250°F†Press x 3/4” Hose End
Dust Cap and ChainBlow-Out Proof Stem
UPBA-480BH* ½” & ¾”
D
B
A
F
C
E
1 23
4
5
6
7
11
8
910
13
14
15
12
DIMENSIONS
UNITS1/2”DN15
3/4”DN20
A-PORT DIA
INCHES 0.51 0.76mm 13 19
BINCHES 3.09 3.50mm 78 90
CINCHES 1.55 1.70mm 39 43
DINCHES 1.62 2.01mm 41 51
EINCHES 3.15 4.33mm 80 110
F TUBE DIA
INCHES 0.82 0.99mm 21 25
GINCHES 0.83 0.98mm 21 25
Cv 18 40†Non-Shock
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* Ultra Press Valves are designed and qualified for use in copper tubing systems only, Types K, L, & M per ASTM B88.
Do not pressurize cap.Pressure not to exceed 40 psi.
Rev. 7
Brass Ball Valve For Potable WaterTwo Piece Full Port
200 psig @ 250°F†Press x 3/4” Hose End
Dust Cap and ChainBlow-Out Proof Stem
UPBA-480SH* ½” & ¾”
DIMENSIONS
UNITS1/2”DN15
3/4”DN20
A-PORT DIA
INCHES 0.51 0.76mm 13 19
BINCHES 3.09 3.50mm 78 90
CINCHES 1.55 1.70mm 39 43
DINCHES 1.62 2.01mm 41 51
EINCHES 3.15 4.33mm 80 110
F TUBE DIA
INCHES 0.82 0.99mm 21 25
GINCHES 0.83 0.98mm 21 25
Cv 18 40†Non-Shock
D
B
A
F
C
E
1 23
4
5
6
7
11
8
910
13
14
15
12
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
Note: Pressure/Temperature rating shown are for VALVE ONLY. Hose side pressure and temperature limit is based on connected hose and is users responsibility
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
SOLDERED ENDS600 PSIG WOG / 150 PSIG SWP *TWO PIECE, FULL PORT
967
4
10
3
5
2
1
8 11
A
F
B
E
D
C
MATERIALS LIST
DIMENSIONS
ITEM PART MATERIALS ASTM/SPEC1 Body Brass, Forged B2832 Tailpiece Brass, Forged B2833 Ball CP Brass Ball B5844 Ball Seal PTFE Commercial5 Stem Brass B166 O-Ring Buna-N D2006
7 Thrust PTFE Commercial
8 Gland Nut Brass B169 Packing PTFE Commercial
10 Handle Zinc Plated Steel Commercial
11 Handle Nut Zinc Plated Steel Commercial
Seat Material RatingJoint Limits fromASME B16.18 for 95/5 Solder
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERPp-
si
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE CHART
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
Solder JointLimit Temperature
SaturatedSteam
VACUUM SERVICE TO 29 INCHES Hg.
Washer
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
Also Available UPBA485B-LL
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
17 Memory Stop Zinc Plated Steel Commercial* Ultra Press Valves are designed and qualified for use in copper tubing systems only, Types K, L, & M per ASTM B88.
Press x Threaded Ends With Extension Stem & Memory Stop
Blow-Out Proof Stem
UPBA-491B* ½”-2”
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
17 Memory Stop Zinc Plated Steel Commercial* Ultra Press Valves are designed and qualified for use in copper tubing systems only, Types K, L, & M per ASTM B88.
Press x Threaded Ends WithExtension Stem & Memory Stop
Blow-Out Proof Stem
UPBA-491S* ½”-2”
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Dimensions and Workmanship Conform to MSS SP-80UP105 ¼”-2”
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
10 Packing Graphite Commercial11 Name Plate Sh. Alum Commercial
1 Not used on 1/2” and smaller
DIMENSIONSUnits Size A B C CvINCHES 1/4 1.75 3.63 2.00
5.6mm 44 92 51INCHES 3/8 1.81 3.63 2.00
10.7mm 46 92 51INCHES 1/2 2.00 3.63 2.00
17.6mm 51 92 51INCHES 3/4 2.18 4.38 2.50
32.0mm 55 111 64INCHES 1 2.56 5.00 2.75
54.0mm 65 127 70INCHES 1 1/4 2.78 5.31 3.44
97.0mm 71 135 87INCHES 1 1/2 2.81 6.34 3.75
135.0mm 71 161 95INCHES 2 3.31 7.44 3.75
230.0mm 84 189 95† Non-Shock
Rev. 16
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 6
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
10 Packing Graphite Commercial11 Name Plate Sh. Alum Commercial
1 Not used on 1/2” and smaller
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 15
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
10 Name Plate Sh. Alum Commercial1 Not used on 1/2” and smaller
DIMENSIONSUnits Size A B C CvINCHES 1/4 1.75 4.38 2.00
5.6mm 44 111 6INCHES 3/8 1.81 4.38 2.00
10.7mm 46 111 6INCHES 1/2 2.00 4.38 2.00
17.6mm 51 111 6INCHES 3/4 2.18 5.84 2.50
32.0mm 55 148 64INCHES 1 2.56 7.06 2.75
54.0mm 65 179 70INCHES 1 1/4 2.78 8.78 3.44
97.0mm 71 223 87INCHES 1 1/2 2.81 9.50 3.75
135.0mm 71 241 95INCHES 2 3.31 11.50 3.75
230.0mm 84 292 95† Non-Shock
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
Rev. 14
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 6
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 15
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 14
Iron Gate Valve for Potable Water125 SWP -200 WOG †
OS & Y • Solid Wedge DiscBolted Bonnet • Flanged Ends
Conforms to: MSS SP-70F-2885-M26 2”-12”Flange shape and drilling to specification ASME/ANSI B16.1 (125 lb.)
DIMENSIONS - INCHES/MILLIMETERS
Units Size A B C D E CvInches
mm2 7.00
17815.00381
7.00178
6.00152
0.6316 215
Inchesmm
2 1/2 7.50191
16.88429
7.00178
7.00178
0.6917 335
Inchesmm
3 8.00203
18.75476
8.00203
7.50191
0.7519 510
Inchesmm
4 9.00229
22.75578
10.00254
9.00229
0.9424 945
Inchesmm
5 10.00254
27.13689
12.00305
10.00254
0.9424 1525
Inchesmm
6 10.50267
30.13765
12.00305
11.00279
1.0025 2250
Inchesmm
8 11.50292
40.131019
14.00356
13.50343
1.1329 4150
Inchesmm
10 13.00330
48.251226
16.00406
16.00406
1.8146 6700
Inchesmm
12 14.00356
56.881445
18.00457
19.00483
1.2532 9925
Suffix M – Signifies “MILVACO” Series International Valves.† Non-Shock
MATERIAL LISTNo. PART MATERIAL SPECIFICATION
1 Stem Steel ASTM A108-Gr.1020
2 Handwheel Nut Ductile Iron ASTM A 536
3 Name Plate Aluminum
4 Yoke Bushing Ductile Iron ASTM A 536
5 Handwheel Cast Iron ASTM A126, Class B
6 2 Yoke Bushing Nut Cast Iron ASTM A 126, Class B
7 1 Bonnet Cast Iron ASTM A 126, Class B
8 1 Yoke Cast Iron ASTM A 126, Class B
9 Gland Follower Nut Steel ASTM A307-B
10 Gland Follower Ductile Iron ASTM A 536
11 Packing Gland Cast Iron ASTM A 126, Class B
12 Packing Graphite
13 Gland Follower Bolt Steel ASTM A307-B
14 Backseat Bushing Ductile Iron ASTM A 536
15 Nut Steel ASTM A307-B
16 Body Gasket Graphite
17 Bolt Steel ASTM A307-B
18 Body Cast Iron ASTM A126, Class B
19 Wedge Cast Iron ASTM A126, Class B
20 Seat Ring Cast Iron ASTM A126, Class B
1 Sizes 2” to 3” made with yoke integral with bonnet. Sizes 4” through 12” made with separate yoke bolted to bonnet.
2 Sizes 2” to 3” only
Tested and Certified byIAPMO R&T to NSF/ANSI 372
Rev. 5
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-31
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-32
Bronze Globe Valve For Potable Water300 psig WOG †
Bronze Disc Threaded Bonnet • Threaded Ends
Dimensions and Workmanship Conform to MSS SP-80UP502 ⅛”-2”
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Bronze B584 C898332 Bonnet Bronze B584 C89833
DIMENSIONSUnits Size A B C CvINCHES 1/8 1.63 3.06 2.00
0.6mm 41 78 51INCHES 1/4 1.63 3.06 2.00
1.2mm 41 78 51INCHES 3/8 1.81 3.19 2.00
2.2mm 46 81 51INCHES 1/2 2.31 3.63 2.00
3.6mm 59 92 51INCHES 3/4 2.56 3.94 2.50
6.7mm 65 100 64INCHES 1 2.94 4.38 2.75
11.1mm 75 111 70INCHES 1 1/4 3.38 5.19 3.44
20.0mm 86 132 87INCHES 1 1/2 3.69 5.75 3.75
28.0mm 94 146 95INCHES 2 4.44 6.75 4.25
48.0mm 113 172 108† Non-Shock
1/8” to 1/2” sizes have the disc integral with the stem and have no disc ring.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
98
10
Rev. 14
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-33
Bronze Globe Valve For Potable Water200 psig @ 250°F †
Bronze Disc Threaded Bonnet • Press Ends
Dimensions and Workmanship Conform to MSS SP-80UP502 P2* ½”-2”
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Bronze B584 C898332 Bonnet Bronze B584 C89833
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
9
8
10
Rev. 6
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-34
Bronze Globe Valve For Potable Water300 psig WOG †
Bronze Disc Threaded Bonnet • Solder Ends
Dimensions and Workmanship Conform to MSS SP-80UP1502* ⅜”-2”
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Bronze B584 C898332 Bonnet Bronze B584 C89833
*1/2” sizes has the disc integral with the stem and have no disc ring.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 15
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Horizontal Swing • Threaded EndsDimensions and Workmanship Conform to MSS SP-80UP509 ¼”-3”
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Bronze B584 C898332 Cap Bronze B584 C89833
3 LeverStainless Steel A276 S30200
(1/4”-2”)
Bronze B584 C89833 (2 1/2”-3”)
4 Disc Brass
ASTM B21 C46400, H02 (1/4"-1 1/2")
Bronze ASTM B584 C89833 (2"-3”)
5 Pin
Stainless Steel A276 S30400 (1”-2”)
Stainless SteelA582 S30300(1/4”-3/4”)(2 1/2”-3”)
6 Disc Nut Brass B21 C46400 H02 (2 1/2”-3”)
7 Retaining Ring Stainless Steel A276 S30400
8 Plug (not shown) Brass B21 C46400, H02
DIMENSIONSUnits Size A B CvINCHES 1/4 2.13 1.32
3.3mm 54 34INCHES 3/8 2.13 1.32
6.0mm 54 34INCHES 1/2 2.31 1.32
10.0mm 59 34INCHES 3/4 2.63 1.69
18.0mm 67 43INCHES 1 3.25 2.00
31.0mm 83 51INCHES 1 1/4 3.56 2.13
54.0mm 91 54INCHES 1 1/2 4.00 2.38
76.0mm 102 60INCHES 2 4.75 2.81
131.0mm 121 71INCHES 2 1/2 6.00 3.63
233.8mm 152 92INCHES 3 6.88 4.19
286.4mm 175 106† Non-Shock
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 18
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-36
Bronze Check Valve For Potable Water200 psig @ 250°F †
Horizontal Swing • Press EndsDimensions and Workmanship Conform to MSS SP-80UP509 P2* ½”-2”
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Bronze B584 C898332 Cap Bronze B584 C898333 Lever Stainless Steel A276 S30200
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 6
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-38
Bronze Lift Check Valve For Potable Water250 psig WOG †
PART MATERIAL SPECIFICATION1 Body Cast Bronze ASTM B584, C844002 Tail Piece Cast Bronze ASTM B584, C844003 Disc Buna/TFE4 Disc Holder Cast Bronze ASTM B584, C857005 Spring Bronze ASTM B103, C52100
MATERIAL SPECIFICATIONNO.
i - 37
CHECK 548B/548TBRONZE SPRING CHECK VALVE
www.milwaukeevalve.com
t Printed on recycled paper with soy ink. 05/05
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to changedesign, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com
Note: Check Valves may be installed in both the horizontal and vertical lines with upward flow or in any intermediate position.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 15
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Do not use for reciprocating air compressor service.
Note 1: Check Valves may be installed in both the horizontal and vertical lines with upward flow or in any intermediate position.
C
M
Y
CM
MY
CY
CMY
K
Drawing.pdf 1 3/30/16 8:22 PM
Press End Adapter (4151 Series)
6
With Press Ends
* Both the valve and 4151 series press end adapters are tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “Lead Free” compliance.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 5
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-40
Bronze Lift Check Valve For Potable Water250 psig WOG †
PART MATERIAL SPECIFICATION1 Body Cast Bronze ASTM B 584, C844002 Tail Piece Cast Bronze ASTM B 584, C844003 Disc TFE/BUNA*4 Disc Holder Cast Bronze ASTM B 584, C857005 Spring Bronze ASTM B 103, C52100
MATERIAL SPECIFICATIONNO.
05/05 Printed on recycled paper with soy ink. t i - 38
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to changedesign, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 16
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-41
Brass Swing Check Valve for Potable Water200 WOG †Brass Disc
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certifited by IAMPO R&T to NSF/ANSI 61 and NSF/ANSI 372 for Lead Free Compliance.
Rev. 20
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* Ultra Press Valves are designed and qualified for use in copper tubing sys-tems only, Types K, L, & M per ASTM B88. For instal-lation instructions please see engineering section on website.
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Rev. 11
Iron Check Valve for Potable Water125 SWP - 200 WOG †
Horizontal Swing • Flanged EndsBolted Cover
Conforms to: MSS SP-71
MATERIAL LISTNo. PART MATERIAL SPECIFICATION
1 Bolt Steel
2 Name Plate Aluminum
3 Cover Cast Iron ASTM A126, Class B
4 Cover Gasket Graphite
5 Nut Steel
6 Side Plug Steel ASTM A108
7 Gasket Graphite
8 Hanger Pin Stainless Steel
9 Hanger Ductile Iron ASTM A536
10 Disc Cast Iron ASTM A126, Class B
11 Washer Steel
12 Cotter Pin Stainless Steel
13 Seat Ring Cast Iron ASTM A126, Class B
14 Disc Nut Steel ASTM A307
15 Body Cast Iron ASTM A126, Class B
16 Stud Bolt Steel
Note 1: On pump discharge, the preferred check valve is either an in-line spring loaded valve or a swing design with lever and weight. Install these valves as far as possible from the pump and elbows with a minimum distance of 5 times the pipe diameter.
Note 2: These iron body check valves may be installed in horizontal and vertical lines with upward flow or in intermediate position.
Note 3: The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (.25%) of lead by weight. Meets the requirements of Senate law S.3874.
DIMENSIONS - INCHES/MILLIMETERS
Units Size A B C D CvInches
mm2 8.00
2033.94100
6.001.52
0.6316 137
Inchesmm
2 1/2 8.50216
4.50114
7.00178
0.6917 221
Inchesmm
3 9.50241
5.13130
7.50191
0.7519 327
Inchesmm
4 11.50292
6.13156
9.00229
0.9424 605
Inchesmm
5 13.00330
6.81173
10.00254
0.9424 975
Inchesmm
6 14.00356
8.00203
11.00279
1.0025 1440
Inchesmm
8 19.50495
9.44240
13.50343
1.1329 2670
Inchesmm
10 24.50622
12.06306
16.00406
1.1930 4300
Inchesmm
12 27.50699
16.13410
19.00483 1.25 6350
† Non-Shock
Flange shape and drilling to specification ASME B 16.1 (125 lb).
F-2974A26 2”-12”
Tested and Certified byIAPMO R&T to NSF/ANSI 372
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-43Rev. 6
Iron Check Valve for Potable Water125 SWP - 200 WOG †
Horizontal Swing • Flanged EndsBolted Cover
Conforms to: MSS SP-71
Flange shape and drilling to specification ASME B 16.1 (125 lb).
Note 1: On pump discharge, the preferred check valve is either an in-line spring loaded valve or a swing design with lever and weight. Install these valves as far as possible from the pump and elbows with a minimum distance of 5 times the pipe diameter.
Note 2: These iron body check valves may be installed in horizontal and vertical lines with upward flow or in intermediate position.
Note 3: The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (.25%) of lead by weight. Meets the requirements of Senate law S.3874.
MATERIAL LISTNo. PART MATERIAL SPECIFICATION
1 Bolt Steel
2 Name Plate Aluminum
3 Cover Cast Iron ASTM A126, Class B
4 Cover Gasket Graphite
5 Nut Steel
6 Side Plug Steel
7 Gasket Graphite
8 Hanger Pin SS 304
9 Hanger Ductile Iron ASTM A536
10 Disc Cast Iron ASTM A126, Class B
11 Washer Steel
12 Cotter Pin Zinc Plated Steel
13 Seat Ring Cast Iron ASTM A126, Class B
14 Disc Nut Steel ASTM A307
15 Body Cast Iron ASTM A126, Class B
16 Stud Bolt Steel
DIMENSIONS - INCHES/MILLIMETERS
Units Size A B C D CvInches
mm2 8.00
2034.56116
6.001.52
0.6316 137
Inchesmm
2 1/2 8.50216
5.38137
7.00178
0.6917 221
Inchesmm
3 9.50241
5.56141
7.50191
0.7519 327
Inchesmm
4 11.50292
6.69170
9.00229
0.9424 605
Inchesmm
5 13.00330
7.75197
10.00254
0.9424 975
Inchesmm
6 14.00356
9.50241
11.00279
1.0025 1440
Inchesmm
8 19.50495
10.38264
13.50343
1.1329 2670
Inchesmm
10 24.50622
12.00305
16.00406
1.1930 4300
Inchesmm
12 27.50699
13.50343
19.00483
1.2532 6350
Suffix M – Signifies “MILVACO” Series International Valves.† Non-Shock
F-2974M26 2”-12”
Tested and Certified byIAPMO R&T to NSF/ANSI 372
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-44Rev. 7
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-45
DIMENSIONS
*Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25%. Source: California Health and Safety Code (116875).
AIR TO AIR ACTUATOR ASSEMBLY
Valve Model Dimensions in InchesSize Actuator A '' B " C " D " E "
Iron Butterfly Valve for Potable Water200 psi Non-Shock WOG
Bi-Directional Dead End Service to 200 psi MaxAir to Air Pneumatic Actuator
Specifications: API-609 MSS SP-67 Type 1CLA23E 2”-12”ABS Type Approved; Cat. ACFR-46
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
• Cast Iron• Lug Pattern• Alumninum Bronze Disc• EPDM Liner• 200 WOG• Temp Range: 0° to 250° F for HVAC service• Double-acting actuator sized for 80 psi air supply• 120V four-way NEMA 4/4x NAMUR mounted solenoid• For on/off service
Rev. 1
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-46
*Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25%. Source: California Health and Safety Code (116875).
Iron Butterfly Valve for Potable Water200 psi Non-Shock WOG
Bi-Directional Dead End Service to 200 psi MaxSpring Return Pneumatic Actuator
Specifications: API-609 MSS SP-67 Type 1CLB23E 2”-12”ABS Type Approved; Cat. ACFR-46
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
DIMENSIONS
SPRING RETURN ACTUATOR ASSEMBLY
Valve Model Dimensions in InchesSize Actuator A '' B " C " D " E "
• Cast Iron• Lug Pattern• Alumninum Bronze Disc• EPDM Liner• 200 WOG• Temp Range: 0° to 250° F for HVAC service• Spring return fail closed actuator• 120V four-way NEMA 4/4x NAMUR mounted solenoid• For on/off service
Rev. 1
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-47
*Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25%. Source: California Health and Safety Code (116875).
Iron Butterfly Valve for Potable Water200 psi Non-Shock WOG
Bi-Directional Dead End Service to 200 psi MaxElectric Actuator
Specifications: API-609 MSS SP-67 Type 1CLC23E 2”-12”ABS Type Approved; Cat. ACFR-46
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
DIMENSIONS
120 VAC ELECTRIC ACTUATOR ASSEMBLY
Valve Model Dimensions in InchesSize Actuator A '' B " C " D " E "
• Cast Iron• Lug Pattern• Alumninum Bronze Disc• EPDM Liner• 200 WOG• Temp Range: 0° to 250° F for HVAC service• 120VAC NEMA 4 rated electric actuator• 25% duty cycle• For on/off service• Two limit switches• Manual override• Visual position indicator
Rev. 2
NEW BERLIN, WI 53151-7301R
MILWAUKEE VALVE CO., INC.DWN
CHKD
APVD
MDLD
REG APVL
TITLE
SHEET
in [mm]PRIMARY / SECONDARY
UNITS
THIS PRINT IS THE PROPERTY OF MILWAUKEE VALVE COMPANY, INC. AND REPRESENTS A PROPIETARY ARTICLE IN WHICH MILWAUKEE VALVE COMPANY, INC.
RETAINS ANY AND ALL PATENTS AND OTHER RIGHTS, INCLUDING EXCLUSIVE RIGHTS OF USE AND/OR MANUFACTURE AND/OR SALE. POSSESION OF THIS PRINT
DOES NOT CONVEY ANY PERMISSION TO REPRODUCE PRINT OR MANUFACTURE THE ARTICLE OR ARTICLES SHOWN THEREIN; SUCH PERMISSION TO BE GRANTED
ONLY BY SPECIFIC AUTHORIZATION IN WRITING, SIGNED BY AN OFFICER OR OTHER AUTHORIZED AGENT OF MILWAUKEE VALVE COMPANY INC.
THIRD ANGLE PROJECTION
ELECTRIC ACTUATED BUTTERFLY
SCALE: 1:4 MASS UNITS:
INTL ECN150447
DEPARTMENTENGINEERING
KJS11/22/2016
08-21-2012 SOLAPC NO
-REF NO SIZE
CCAGE CODE
76364
BUTTERFLY W/ ELECT. ACTUATOR
1 OF 1
REV1
"C"
"A"
"E"
"B"
"D"
CLC23E 120VAC Electric Butterfly Valve 2" - 12"
• Cast Iron• Lug Pattern• Aluminum Bronze Disc• EPDM Liner• 200 WOG• Temp Range: 0° to 250° F for HVAC service• 120VAC NEMA 4 rated electric actuator• 25% duty cycle• For on/off service• Two limit switches• Manual override• Visual position indicator
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-48
RATINGS
SPECIFICATIONS
FEATURES
OPERATORS
200 PSI Butterfly ValveNon Shock Water, Oil,Gas
MSS SP-67API-609
Heavy Duty DesignExtended Neck BodyPhenolic Cartridge DesignLow Profile DiscLow Torque LinerBlowout Proof StemsBubble Tight SealStainless Steel Stems-416Low Torque Polymer Bearing-StdBi-directional Shut offDead End Service to 150# PSIVacuum Ratings to 29”Field Repairable
10 Position, Pad Lockable,Ductile Iron, Lever Handle - Std.(Epoxy Coating - Optional)
Iron Butterfly Valve for Potable Water200 psi Non-Shock WOG
Bi-Directional Dead End Service to 200 psi MaxSpecifications: API-609 MSS SP-67 Type 1CL Series-Rev. D 2”-12”
Rev. 15
MATERIALS LISTITEM PART MATERIALS
1 BODY CAST IRON ASTM A126 CL B2 DISC ALUMINUM BRONZE ASTM B148
3 BOTTOM STEM STAINLESS STEEL TYPE 416
4 TOP STEM STAINLESS STEEL TYPE 4165 TOP BEARING REINFORCED NYLON6 SEAL EPDM7 LINER EPDM8 ROLL PIN STAINLESS STEEL9 STEM SEAL EPDM
10 LOWER BEARING REINFORCED NYLON
11 OPERATOR
LEVER HANDLEEPOXY COATED LEVER HANDLEGEAR OPERATORGEAR OPERATOR WITH MEMORY STOPGEAR OPERATOR WITH LOCK
12 RETAINING RING ST1066 SPRING STEEL (65Mn)
ABS Type Approved; Cat. ACFR-46
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-49
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
DIMENSIONSVALVE SIZE
INCHESDN
14 16 18 20 24352 406 457 508 610
A INCHESmm
15.50 16.75 18.50 19.75 22.43398 425 469 501 569
B INCHESmm
11.56 12.69 13.63 15.13 18.06258 322 346 384 458
C INCHESmm
21.00 23.50 25.00 27.50 32.10533 596 635 698 815
D INCHESmm
13.25 15.25 17.24 19.24 23.25336 387 438 489 591
D1(Chord Dia.) INCHESmm
12.94 14.77 16.70 18.64 22.49329 375 424 474 571
D11 (Intrusion) INCHESmm
5.06 5.59 6.34 7.09 8.55128 142 161 180 217
E INCHESmm
1.63 1.63 2.13 2.13 2.1341 41 54 54 54
F INCHESmm
6.50 6.50 9.50 9.50 7.50165 165 241 241 190
G INCHESmm
2.00 2.00 3.00 3.00 3.0650 50 76 76 77
H (Body) INCHESmm
3.06 4.00 4.50 5.00 6.0677 101 114 127 153
H1 (Liner) INCHESmm
3.19 4.13 4.63 5.13 6.1981 104 117 130 157
J INCHESmm
0.69 0.69 0.81 0.81 0.8117 17 20 20 20
K INCHESmm
5.25 5.25 7.50 7.50 7.50133 133 190 190 190
L No. ofHoles 12 16 16 20 20
M ThreadSize 1-8 1-8 1 1/8-7 1 1/8-7 1 1/4-7
N INCHESmm
18.75 21.25 22.75 25.00 29.50476 530 577 635 749
P (Key Size) INCHESmm
0.38 0.38 0.50 0.50 0.509 9 12 12 12
R INCHESmm
17.25 18.75 19.63 20.88 25.00438 476 458 530 635
U INCHESmm
3.13 3.13 4.50 4.50 4.6379 79 114 114 117
Iron Butterfly Valve for Potable Water150 psi Non-Shock WOG
Dead End Service to 150 psi MaxSpecifications: API-609 MSS SP-67 Type 1CL Series 14”-24”
Rev. 16
MATERIALS LISTITEM PART MATERIALS
1 BODY CAST IRON ASTM A126 CL. B2 DISC ALUMINUM BRONZE ASTM B1483 STEM STAINLESS STEEL TYPE 4164 TOP BEARING REINFORCED NYLON5 STEM O-RING EPDM6 LINER EPDM7 STEM PIN ANSI 4140 OR AISI 61508 LINER O-RING EPDM
9 LOWER BEARING REINFORCED NYLON
10 OPERATOR
GEAR OPERATORGEAR OPERATOR WITH MEMO-RY STOPGEAR OPERATOR WITH LOCK
1114”-20”
GROUNDING SPRING STAINLESS STEEL TYPE 302
1224” Only
GROUNDING BALL AISI 1022
1324” Only
TENSION SCREW AISI 1020
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
ABS Type Approved; Cat. ACFR-46
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
200 psi Non-Shock WOGBi-Directional Dead End Service to 200 psi Max
Specifications: API-609 MSS SP-67 Type 1ML133E/ML233E/ML333E* 2”-12”
Rev. 16
MATERIALS LISTITEM PART MATERIALS
1 BODY DUCTILE IRON-ASTM A536
2 DISC ALUMINUM BRONZE- ASTM B 148**
3 BOTTOM STEM STAINLESS STEEL TYPE 416
4 TOP STEM STAINLESS STEEL TYPE 416
5 TOP BEARING REINFORCED NYLON
6 SEAL7 LINER EPDM8 ROLL PIN STAINLESS STEEL 9 STEM SEAL EPDM, BUNA, VITON
10 LOWER BEARING REINFORCED NYLON
11 OPERATOR
LEVER HANDLEEPOXY COATED LEVER HANDLEGEAR OPERATORGEAR OPERATOR WITH MEMORY STOPGEAR OPERATOR WITH LOCKACTUATOR-AIR/AIRACTUATOR-AIR/SPRINGACTUATOR-ELECTRIC
12 RETAINING RING 1066 SPRING STEEL (65Mn)
*Provided on 8”, 10” and 12”.
Approved by U.S. Coast Guard for use in Category A service as described in Title 46 Code of Federal Regulations 56.20-15.
Bi-Directional Dead End Service to 200 PSI Max.EPDM Only.
RATINGS
SPECIFICATIONS
FEATURES
OPERATORS
200 PSI Butterfly ValveNon Shock Water, Oil,Gas
MSS SP-67API-609
Heavy Duty DesignExtended Neck BodyPhenolic Cartridge DesignLow Profile DiscLow Torque LinerBlowout Proof StemsBubble Tight SealStainless Steel Stems-416 or 316Low Torque Polymer Bearing-StdBi-directional Shut offDead End Service to 150# PSIVacuum Ratings to 29”Field Repairable
10 Position, Pad Lockable,Ductile Iron, Lever Handle - Std.(Epoxy Coating - Optional)
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
ABS Type Approved; Cat. ACFR-46
Tested and Certified byIAPMO R&T to NSF/ANSI 372and NSF/ANSI 61
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
UP-51
Iron Butterfly Valve for Potable Water150 psi Non-Shock WOG
Dead End Service to 150 psi MaxSpecifications: API-609 MSS SP-67 Type 1
DIMENSIONS
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
9
G
H’H
D”
U
3 A
D’
P(SQ)
7
B
Ø C
1
RTO
TOP OFM.V.
GEARUNIT
Ø E
24” HAS 2 PINS
Ø D
L & M
26
Ø N(BC)
TYPICAL24” VALVE
GROUNDINGCONNECTION
13
12
TYPICAL 14”-20” VALVEGROUNDINGCONNECTION
11
ØK
ØJ
F
F
TYPICAL 24” VALVEOPERATOR FLANGE
8A
A
5
84
34
DETAIL OF VALVE STEM
ØF
TYPICAL 14”-20” VALVEOPERATOR FLANGE
ØK
ØJ
SECTION ATA-A
9
5
10
Specifications: API-609 MSS SP-67
14” - 24 ” 150 PSI BUTTERFLY VALVE
VALVE SIZEINCHES
DN14 16 18 20 24
352 406 457 508 610
A INCHESmm
15.50 16.75 18.50 19.75 22.43398 425 469 501 569
B INCHESmm
11.56 12.69 13.63 15.13 18.06258 322 346 384 458
C INCHESmm
21.00 23.50 25.00 27.50 32.10533 596 635 698 815
D INCHESmm
13.25 15.25 17.24 19.24 23.25336 387 438 489 591
D1(Chord Dia.) INCHESmm
12.94 14.77 16.70 18.64 22.49329 375 424 474 571
D11 (Intrusion) INCHESmm
5.06 5.59 6.34 7.09 8.55128 142 161 180 217
E INCHESmm
1.63 1.63 2.13 2.13 2.1341 41 54 54 54
F INCHESmm
6.50 6.50 9.50 9.50 7.50165 165 241 241 190
G INCHESmm
2.00 2.00 3.00 3.00 3.0650 50 76 76 77
H (Body) INCHESmm
3.06 4.00 4.50 5.00 6.0677 101 114 127 153
H1 (Liner) INCHESmm
3.19 4.13 4.63 5.13 6.1981 104 117 130 157
J INCHESmm
0.69 0.69 0.81 0.81 0.8117 17 20 20 20
K INCHESmm
5.25 5.25 7.50 7.50 7.50133 133 190 190 190
L No. ofHoles 12 16 16 20 20
M ThreadSize 1-8 1-8 1 1/8-7 1 1/8-7 1 1/4-7
N INCHESmm
18.75 21.25 22.75 25.00 29.50476 530 577 635 749
P (Key Size) INCHESmm
0.38 0.38 0.50 0.50 0.509 9 12 12 12
R INCHESmm
17.25 18.75 19.63 20.88 25.00438 475 458 530 635
U INCHESmm
3.13 3.13 4.50 4.50 4.6379 79 114 114 117
ML133E/ML333E 14”-24”
Rev. 8
MATERIALS LISTITEM PART MATERIALS
1 BODY DUCTILE IRON ASTM A5362 DISC ALUMINUM BRONZE ASTM B 1483 STEM STAINLESS STEEL TYPE 4164 TOP BEARING REINFORCED NYLON5 STEM O-RING EPDM, BUNA, VITON (1)6 LINER EPDM7 STEM PIN ANSI 4140 OR AISI 61508 LINER O-RING EPDM9 LOWER BEARING REINFORCED NYLON
10 OPERATOR
GEAR OPERATORGEAR OPERATOR WITH MEMORY STOPGEAR OPERATOR WITH LOCKACTUATOR-AIR/AIR (1)ACTUATOR-AIR/SPRING (1)ACTUATOR-ELECTRIC (1)
1114”-20” GROUNDING SPRING STAINLESS STEEL TYPE 302
1224” Only GROUNDING BALL AISI-1022
1324” Only TENSION SCREW AISI-1020
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).
ABS Type Approved; Cat. ACFR-46
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
1 Indicator Sintered Iron F0008P2 Housing Bronze ASTM 5843 Body Bronze ASTM 5844 Handle Brass5 Disc Stainless Steel Type 3046 Disc Seal EPDM7 Cover Die Cast Aluminum
Note: Lead free refers to the wetted surface of the pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤0.25%. Source: California Health and Safety Code (116875).