www.australianpipelinevalve.com.au BALL VALVES - FLOATING SMALL BORE
www.australianpipelinevalve.com.au
BALL VALVES - FLOATING SMALL BORE
QUALITY VALVE MANUFACTURER
QUALITY COMMITMENT
Quality is Our First Priority.
Consistent product quality and a proven
track record makes Australian Pipeline
Valve a dependable choice for cast
Gate, Globe and Check Valves, where
total reliability is the number one concern.
Since its founding, APV’s philosophy has
been focused on quality. Our valves
are manufactured in full compliance
to worldwide standards (such as ASME,
ANSI, API 6D, API 600, ISO, BS, AS).
70-78 Stanbel Road Salisbury Plain South Australia 5109 Telephone +61 (0)8 8285 0033 Fax +61 (0)8 8285 0044
email: [email protected]
AUSTRAL IAN P I P E L I N E VA LVE 3
Firesafe Certificates 4
1 Piece Body FS900 Series Class 800 7
2 Piece Body FS660 Series 1000 PSI 8
2 Piece Body FS660 Series Class 800 & 900 9
2 Piece Body FS660 Series Class 900 & 1500 10
2 Piece Body FS660 Series 3000 & 6000 PSI 11
2 Piece Body FS660 Series Extended Ends 12
2 Piece Body FS660 Series A72-100-AF26 14
1 Piece Body FS660 Series 10,000 PSI 15
2 Piece Body FS660-SKF Series Oilpatch 2000 - 3000 PSI 16
2 Piece Body 326-FUS Series Oilpatch 2000 - 5000 PSI 17
3 Piece Body BV100 Series Class 800 - 2500 PSI 18
3 Piece Body BV100 Series Class 3000 - 7500 PSI 22
BV100-MS Series - Model KI-L830 - 2000 PSI 24
Double Block & Bleed DB300 Series 26
Deadman Spring Return Ball Valve 28
Part Number System 30
Technical Risk / Liability 31
CONTENTS
© Copyright Australian Pipeline Valve 1990 - 2019 Edition
Catalogues, photos, brochures and technical publications are the exclusive property of Australian Pipeline Valve.Any unauthorised reproduction in total or in part, shall result in prosecution. Products and data sheets in this publication are subjectto change at anytime without notice. Australian Pipeline Valve reserves the right to carry out amendments to products and materials.
AUSTRALIAN PIPELINE VALVE
Australian Pipeline Valve is one of a small number of companies in the world to hold firesafe certification to the latest 5th & 6th edition of API 607 as well as the latest edition of API 6FA.
Fire Test ReportANSI/API Standard 607, 6th Edition, 2010
ISO 10497: 2010Performed for
Australian Pipeline Valve
www.australianpipelinevalve.com.au/
2 inch Class 1500Stainless Steel Floating Ball Valve
Valve Code: BV100-AK3G3AC4M
Project Number: 215067- 1.1ATest Date: July 7, 2015
Performed by
YARMOUTH RESEARCH AND TECHNOLOGY, LLC
434 Walnut Hill RoadNorth Yarmouth, ME 04097 USA
(207) [email protected]
ISO 15848-1:2014Helium Fugitive Emission Test Report
Performed for
Australian Pipeline Valve
www.australianpipelinevalve.com.au/
2 inch Class 800 3-Piece Ball ValveWith APV Torqturn Actuator JC130S
Product Code: BV100-AK3ECAAC1M
Project Number: 215066- 2.31Test Start Date: July 6, 2015
Performed by
YARMOUTH RESEARCH AND TECHNOLOGY, LLC
434 Walnut Hill RoadNorth Yarmouth, ME 04097 USA
(207) [email protected]
AUSTRAL IAN P I P E L I N E VA LVE4
CERTIFICATES
FIRESAFE & FUGITIVE EMISSIONS CERTIFICATES
Form code: 71.07a Revision: 2016-01 www.dnvgl.com Page 1 of 4© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
FOR VALVE
Statement No:N141A59A
Valid for products not subject to DNV GL classification requirements.
Particulars of Product
Product Name: Ball, Butterfly, Gate, Globe, and Plug Valve
Type designation: Ref. to attachement
Application/context: As per witness certificates
ID/Serial/Tag no: N.A.
The product is intended for: Stock/Projects
Requirements are based on: Fugitive Emission ISO 15848-1, ISO 15848-2, ISO 10497-2010, Cycle & Reliability Endurance test, API622- 2nd Edition 2011, Fire safe Tests API 607 6th Edition
Deviations and limitations, if any, are stated on page 2 onwards.
Particulars of Vendor and Purchaser
Vendor: Global Supply Line Pty. Ltd.
Vendor reference:
Purchaser:
Purchaser reference:
Issued at New York on 2016-07-29
for DNV GL
This document has been digitally signed and will therefore not have handwritten signatures
Fu, GuoqiangSurveyor
Except for any liability caused by DNV GL's gross negligence or wilful misconduct, DNV GL's maximum cumulative liability arising out of or related to the use of or reliance on this document shall be limited to USD 300 000.
INSPECTION REPORTDet Norske Veritas
This is to certify that at the request of the Australian Pipeline Valve, 9-15 Boolcunda Road, Salisbury Plain, Australia, the undersigned Surveyor to this Society did attend the Yarmouth Research and Technology facility, North Yarmouth, ME, USA on 8 January, 27-28 January, 27-28 Feburuary, 20 March and 23 July 2015 in order to witness Cycling Endurance Simulated Testing in accordance with ISO 15848-1, Second Edition requirements on the following two (2) valve and Actuator:
3” ANSI Class 150 Model SLFSBV01 C/W JA Series RF Valve Torqturn Actuator
2” ANSI Class 800 Model BV100 C/W JC Series Torqturn Actuator
Attached is the Yarmouth Research and Technology Valve and Actuator Endurance Cycle Test Certificate, dated July 2015 and duly endorsed by the witnessing Surveyor.
For Det Norske Veritas (USA), Inc.
David Reznik
Folder: A0221025 Report: 16-YYYY-2 Date: 02 April 2016
Det Norske Veritas AS, Veritasveien 1, NO-1322 Hovik, Norway, Telephone: +47 67 57 99 00, Telefax: +47 67 57 99 11, Org. No. NO 945 748 931 MVA
Form No.: 40.91a Issue: January 2008
AUSTRAL IAN P I P E L I N E VA LVE 5
CERTIFICATES
FIRESAFE & FUGITIVE EMISSIONS CERTIFICATES
AUSTRAL IAN P I P E L I N E VA LVE6
CERTIFICATES
FIRESAFE & FUGITIVE EMISSIONS CERTIFICATES
FEATURES• 2000psi CWP.• Single Piece design.• ReinforcedTFEseatsandstuffingboxring.• NACEMR-01-75available.• Compact.• FiresafeCertifiedAPI6075thedition.• ReinforcedTFEseatsincreasedurability.• SeparatingpackingnutandhandlenutensuresNOSTEM LEAKAGEevenwhenthehandleisremoved.• Bellevillewasherassuresleak-freesealoncool-down & as packing wears.• Bottom-loadedblow-outproofstem.• BasicdesigncompliedwithANSIB16.34andMSSSP-110.• NPTthreadedendscompliedwithANSIB1.20.1.• BSPthreadedendscompliedwithBS21.• Graphitegasket&stempackingpreventpost-fire externalleakage.• Post-firemetal-to-metalsealpreventsinternalleakage afterfire.• TestedaccordingtoMSSSP-110/API598.• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedue tothermalcycling.
MATERIALS LIST
OPTIONS-L: Locking Device-M: Tapped Mounting Pad-V: Vented Ball
DIMENSIONSSize øD L A B H W M Weight
in mm in mm in mm in mm in mm in mm in mm (OPTION) (Kg)
1/4” 8 0.36 9.2 2.64 67 0.50 12.7 1.12 28.5 1.81 46 4.33 110 10-24UNC 0.3
3/8” 10 0.36 9.2 2.64 67 0.50 12.7 1.12 28.5 1.81 46 4.33 110 10-24UNC 0.3
1/2” 15 0.36 9.2 2.64 67 0.50 12.7 1.12 28.5 1.81 46 4.37 110 10-24UNC 0.3
3/4” 20 0.49 12.5 2.80 71 0.50 12.7 1.12 28.5 1.97 50 4.37 110 10-24UNC 0.4
1” 25 0.63 16 3.31 84 0.87 22.1 1.37 34.8 2.36 60 5.51 140 10-24UNC 0.7
1-1/4” 32 0.79 20 3.70 94 0.87 22.1 1.37 34.8 2.56 65 5.55 141 10-24UNC 1.1
1-1/2” 40 0.96 24.5 3.94 100 0.93 23.6 1.50 38.1 2.83 72 6.3 160 1/4-20UNC 1.3
2” 50 1.26 32 4.65 118 0.93 23.6 1.50 38.1 3.07 78 6.3 160 1/4-20UNC 2.0
No. Parts Stainless Carbon Steel
1 Body ASTMA351-CF8M/316 ASTMA216-WCB/A105
2 RetainerNut ASTMA351-CF8M/316 ASTMA216-WCB/A108
3 Gasket Graphite Graphite
4 SeatRetainer ASTMA351-CF8M/316 ASTMA216-WCB/A108
5 Ball ASTMA351-CF8M/316 ASTMA351-CF8M/316
6 Seat ReinforcedTFE ReinforcedTFE
7 ThrustWasher PTFE PTFE
8 StemPacking Graphite Graphite
9 Gland AISI304/316 AISI304/316
10 Stem ASTMA276-316 ASTMA276-304
11 BellevilleWasher AISI301 AISI301
12 PackingNut AISI304 AISI304
13 HandleCover PVC PVC
14 Handle AISI304 ZincPlatedSteel
15 HandleNut AISI304 AISI304
16 Anti-StaticDevice AISI304 AISI304
P-T RATINGS
PTFET2500
2000
1500
1000
500
0
-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
172.4
137.9
103.4
68.9
34.4
0.0
T R
WO
RK
ING
PR
ESSU
RE
IN P
SIG
SERVICE TEMPERATURE
WO
RK
ING
PR
ESSU
RE
IN B
AR
R R-PTFE
1/4”-2” 13234
151412
11
9
10
8
7
16
6
5
1
W
A
L
H
ØD
B
Pressure Equalisation Hole
AUSTRAL IAN P I P E L I N E VA LVE 7
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
FS900 SERIES
FS900 UNIBODY CLASS 800 SERIES BALL VALVE
FEATURES• 1000PSICWP• ReinforcedTFEseatsincreasedurability.Adjustablepackinggland.• Bottom-loadedblow-outproofstem.• Low operating torque to reduce automation costs.• OptionalmountingpadcomplieswithISO5211foreaseand interchangeabilityofactuation.• BasicdesigncomplieswithANSIB16.34&MSSSP-110.• NPTthreadedendscomplieswithANSIB1.20.1.• BSPthreadedendscomplieswithBS21.Buttweldendsalsoavailable.• Graphitegasket&stempackingpreventpost-fireexternalleakage.• TestedaccordingtoMSSSP-110/API598.
DIMENSIONS
*For4”refertoseparatedrawing
Buttweld Ends
MATERIALS LISTNo. Parts Stainless Carbon Steel
1 Body ASTMA351CF8M ASTMA216-WCB
2 EndCap ASTMA351CF8M ASTMA216-WCB
3 Seat PTFE/RPTFE PTFE/RPTFE
4 Ball ASTMA351CF8M/316 ASTMA351CF8M/316
5 Gasket Graphite Graphite
6 ThrustWasher PTFE PTFE
7 StemPacking Graphite Graphite
8 Stem ASTMA276-316 ASTMA276-304
9 Gland AISI304 AISI304
10 SpringWasher AISI304 AISI304
11 HandleNut AISI304 AISI304
12 Handle AISI304 ZincPlatedSteel
13 HandleCover PVC PVC
14 StopScrew AISI304 AISI304
15 Anti-StaticDevice AISI304 AISI304
Size ØD L I K ØG H W M
in mm mm mm mm mm mm mm mm mm
1/4 8 11.6 54 50 96
3/8 10 12.7 60 50 96
1/2 15 15 63 5 12 36 62 100 M5
3/4 20 20 73 6 13.5 36 68 121 M5
1 25 25.4 85 8 18 42 80 153 M5
1-1/4 32 32 97/102 8 18 42 86 153 M5
1-1/2 40 38 108/115 8 18 50 86 180 M6
2 50 50 124/134 8 18 50 95 180 M6
2-1/2 65 65 163/168 12 29 70 132 265 M8
3 80 80 185/191 12 29 70 143 265 M8
4 100 100 231/260 * * * 180 * *
Optional locking device
OPTIONS-L: Locking Device-V: Vented Ball-P: Equippedwith Pneumatic Actuator-M: Mounting Pad
P-T RATINGS
PTFET
1500
1000
500
0
-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
103.4
68.9
34.4
0.0
T R
WO
RK
ING
PR
ESSU
RE
IN P
SIG
SERVICE TEMPERATURE
WO
RK
ING
PR
ESSU
RE
IN B
AR
R R-PTFE
1⁄4”-4”
1
2
3
4
15
5
6
7
8
9 10 11
12 13
W
14
M
ØA
B
H
ØD
L
OptionalMountPad
Pressure Equalisation Hole Post-firemetal
to metal seal
FS660 SERIES
2 PIECE BODY 1000 PSI FS660 SERIES BALL VALVE
AUSTRAL IAN P I P E L I N E VA LVE8
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
AUSTRAL IAN P I P E L I N E VA LVE 9
*21/2”to4”seeseparatedrawingandseparatepressure/temperaturechart.*2Mountpadisoptionalanddimensionscanvary.
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
MATERIALS LIST
Size ØD L ØJ K ØG*2 H W Min mm in mm in mm in mm in mm in mm in mm in mm mm
1/4” 8 0.43 11 2.12/2.32 54/58 0.31 8 0.59 8 2.13 54 4.7 120 M53/8” 10 0.49 12.5 2.36/2.40 58/61 0.31 8 0.59 8 2.13 54 4.7 120 M51/2” 15 0.59 15 2.40/2.52 61/64 0.31 8 0.47 12 1.42 36 2.44 62 3.94 100 M53/4” 20 0.79 20 2.87/3.11 73/79 0.39 10 0.53 13.5 1.42 36 2.68 68 4.76 121 M51” 25 1.00 25.4 3.35/4.53 85/115 0.47 12 0.71 18 1.65 42 3.15 80 6.02 153 M5
1-1/4” 32 1.26 32 3.78/4.49 96/114 0.47 12 0.71 18 1.65 42 3.39 86 6.02 153 M51-1/2” 40 1.50 38 4.29/4.53 109/115 0.55 14 0.71 18 1.97 50 3.39 86 7.09 180 M6
2” x 1-1/2” 50 x 40 1.50 38 0.55 14 0.71 18 1.97 50 3.39 86 7.09 180 M62” 50 1.97 50 5.11/5.28 130/134 0.55 14 0.71 18 1.97 50 3.74 95 7.09 180 M6
2-1/2” 65 2.56 65 6.61/7.28 168/185 0.79 20 1.14 29 2.76 70 5.20 132 10.43 265 M83” x 2-1/2” 80 x 65 2.56 65 7.28/8.66 185/220 1.14 29 7.24 184 13.78 350
3” 80 3.15 80 * * 0.79 20 1.14 29 2.76 70 5.63 143 10.43 265 M84” x 3” 100 x 80 3.5 80 * * 0.79 20 1.14 29 5.63 143 10.43 265
4” 100 3.94 100 9.09/10.24 231/260 0.98 25 1.57 40 6.93 176 11.02 280
No. Parts Stainless Carbon Steel
1 Body ASTMA351-CF8M/316 ASTMA216-WCB/A105
2 EndCap ASTMA351-CF8M/316 ASTMA216-WCB/A105
3 Seat RPTFE/Delrin RPTFE/Delrin
4 Ball ASTMA351-CF8M/316 ASTMA351-CF8M/316
5 Gasket Graphite Graphite
6 ThrustWasher PTFE PTFE
7 StemPacking Graphite Graphite
8 Stem ASTMA276-316 ASTMA276-304
9 Gland AISI304 AISI304
10 SpringWasher AISI304 AISI304
11 HandleNut AISI304 AISI304
12 Handle AISI304 ZincPlatedSteel
13 HandleCover PVC PVC
14 StopScrew AISI304 AISI304
15 Anti-Static AISI304 AISI304
FEATURES• 2000psiCWP(800Class)withRPTFEseats.(Upto50NB)• 2220psiCWP(900Class)withDelrin/RPTFEseats.(Upto50NB)• 1500psiCWP65NBto100NB(sealweldedbody)withDelrinor
RPTFE seat.• ReinforcedTFEseatsincreasedurability.• Adjustablepackinggland.• Bottom-loadedblow-outproofstem.• Low operating torque to reduce automation costs.• OptionalmountingpadcomplieswithISO5211for easeandinterchangeabilityofactuation.• BasicdesigncomplieswithANSIB16.34&MSSSP-110.• NPTthreadedendscomplieswithANSIB1.20.1.• BSPthreadedendscomplieswithBS21.• Graphitegasket&stempackingpreventpost-fireexternalleakage.• TestedaccordingtoMSSSP-110/API598.• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedueto thermalcycling.
DIMENSIONS
1
2
3
4
15
5
6
7
8
9 10 11
12 13
14
W
M
ØA
B
H
ØD
L
OptionalMountPad
Pressure Equalisation Hole Post-firemetal
to metal sealOption:-Sealweldedbodyversionalsoavailable
M
W
OPTIONS-K: Locking Device-V: Vented Ball
Buttweld Ends
P-T RATINGS
2500
2000
1500
1000
500
0
-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
172.4
137.9
103.4
68.9
34.4
0.0
R
WO
RK
ING
PR
ESSU
RE
IN P
SIG
SERVICE TEMPERATURE
WO
RK
ING
PR
ESSU
RE
IN B
AR
R R-PTFE
1⁄4”-2”
D DELRIN
22001⁄4”-2” D R
D R21⁄4”-4”
FS660 SERIES
2 PIECE BODY CLASS 800/900FS660 SERIES BALL VALVE
AUSTRAL IAN P I P E L I N E VA LVE10
FEATURES• ANSI900(2200psi)andANSI1500(3700psi)• API3000alsoavailable.• Graphitestempacking.• Blow-out-proof stem design.• RTFE and Devlon seats.• Boltedadjustablepackinggland.• Heavydutyhandles.• Reg.PortandFullPortavailable.• NACEMR-01-75canbesupplied.• FiresafedesignAPI607&API6FA.• LockingKitsavailable• Heavyconstruction.• Enlargedbottom-loadedblow-outproofstem.• SpecialdesignofgasketensuresNOLEAKAGEbetweenbody&cap.• BasicdesigncomplieswithANSIB16.34andMSSSP-110.• NPTthreadedendscomplieswithANSIB1.20.1.• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedueto thermalcycling.
STANDARD EXECUTION• Fire safe.• Threadedends:ANSIB1.20.1-API6A/UNIISO7.1.• ExtendedSocketWeld-Buttweldendsalsoavailable.• Materials:A105/WCB-AISI304/L-AISI316/L.• Gaskets:PTFE,Graphite• Identification:Valvesize-Rating-Material
API 3000 - 3000 PSI WOGMaxWorkingpressure:210bara38ºC-3000psi @100ºFSeatNylon/Delrin
CLASS 1500 - 3700 PSI WOGMaxWorkingpressure:255bara38ºC-3700psi @100ºFSeatNylon/Delrin
Otherspecialmaterialsareavailableforseats:PTFE+316;CarbonGraphite;Vespel,Delrin,PEEKTechnicalinformationuponrequest.
CLASS 900 - 2220 PSI WOGMaxWorkingpressure:153bara38ºC-2220psi @100ºFseatRPTFE/Delrin
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
No. Description Stainless Steel Carbon Steel
1 Body ASTMA351CF8M ASTMA216WCB
2 BodyCap ASTMA351CF8M ASTMA216WCB
3 Seat Delrin
4 Ball ASTMA351CF8M/316 ASTMA351CF8M/316
5 BodyGasket Graphite
5A* BodyO-Ring* Viton*
6-1ThrustWasher
PTFE
6-2 Graphite
7 Stem ASTMA276316
8 StemPacking Graphite
9 Gland AISI304
10 Handle AISI304
11 SpringWasher AISI304
12 HandleNut AISI304
13 Sleeve VinylPlastisol
14 Anti-StaticDevice AISI304
Size ØD L H WWeights KG
IN DN IN MM IN MM IN MM IN MM
1/2” 15 0.50 12.7 2.72 69.0 2.64 67 4.80 122 0.7
3/4” 20 0.75 19.0 3.48 88.5 2.91 74 5.83 148 1.1
1” 25 1.00 25.4 4.02 102.0 3.15 806.61 168
1.7
11/4” 32 1.26 32.0 4.55 115.5 3.39 86 2.4
11/2” 40 1.50 38.0 4.88 124.0 4.76 12110.23 260
3.8
2” 50 1.75 44.5 5.87 149.0 4.96 125 5.9
MATERIALS LIST
DIMENSIONS*Required on 1500 class and API 3000 D
DD
DELRIND4000
3000
2000
1000
0
-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
275.8
206.8
137.9
68.9
0.0
1⁄2”-2”
21⁄2”
3”
1
2
3
4
14
5
6
7
8 9 11 12
10 13
W
H
L
ØD
5A*
FS660 SERIES
2 PIECE BODY CLASS 900 & 1500 FS660 SERIES BALL VALVE
AUSTRAL IAN P I P E L I N E VA LVE 11
DIMENSIONS
Otherspecialmaterialsareavailableforseats:PTFE+316;CarbonGraphite;Vespel,Delrin,PEEKTechnicalinformationuponrequest.FEATURES
• TwoPieceBodyScrewedEnds• InvestmentCastBody• BlowOutProofStem/FloatingBall• Fire-SafeAPI6075thEdition,API6FA3rdEdition• AdjustablePackingGland• Standard Locking Handle• Actuator Mounting Pad• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamageduetothermalcycling
• ThreadsconformtoANSIB1.20.1,BS21,DIN259/2999• Mount Pad
CLASS 2500 - 6000 PSI WOGMaxWorkingpressure:413bar@38ºC-6000psi@100ºFSeatNylon/Delrin
API 3000 - 3000 PSI WOGMaxWorkingpressure:207bar@38ºC-3000psi@100ºFSeatNylon/Delrin
No. Part Name Stainless Steel Carbon Steel1 Body ASTMA351CF8M ASTMA216WCB
2 BodyCap ASTMA351CF8M ASTMA216WCB
3 Seat Delrin
4 Ball ASTMA351CF8M
5-1ThrustWasher
PTFE
5-2 Graphite
6 BodyGasket Graphite
6A BodyO-Ring Viton*
7 Stem ASTMA276316
8 StemPacking Graphite
9 Gland AISI304
*10 GlandPacking PTFE
11 SpringWasher AISI304
12 HandleNut AISI304
13 Handle AISI304
14 Sleeve VinylPlastisol
15 Anti-StaticDevice AISI304
Size ØD L H WISO 5211 M
IN DN IN MM IN MM IN MM IN MM1/4” 8 0.25 6.4 3.00 76.2
1.92 48.8 5.00 127.0 F033xM5
3/8” 10 0.50 12.7 4.00 101.61/2” 15 0.50 12.7 4.00 101.63/4” 20 0.75 19.1 4.25 108.0 2.56 65.0 5.83 148.1 F041” 25 1.00 25.4 4.5 114.3 3.45 87.6 8.10 205.7 F05 3xM6
11/4” 321.50 38.1
5.25 133.44.13 104.9 10.00 254.0 F07 3xM811/2” 40
2” 50 6.25 158.8
MATERIALS LIST
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
Test Pressure 8NB - 50NB (1/4” ~ 2”)
ShellTest 9000PSI
HPCTest 6600PSI
LPCTest 80-100PSI
10
7
6
5
15
4
3
2
1
9 11 12 13 14
8
W
M
H
ØD
L
Pressure Equalisation Hole
6A
FS660 SERIES
2 PIECE BODY CLASS 3000 & 6000 PSIFS660 SERIES BALL VALVE
D
P-T RATINGS
7000
6000
4500
3000
1500
0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
482.7
413.7
310.3
206.8
103.4
0.0
WO
RK
ING
PR
ESSU
RE
IN P
SIG
SERVICE TEMPERATURE
WO
RK
ING
PR
ESSU
RE
IN B
AR
1⁄4”-2”
NYLONN
N1⁄4”-2”
DELRIND
DIMENSIONS (MM)
•RefertononextendedFS660datasheetformainvalvespecification•Class800,1500,2500•DesignandManufactureperANSIB16.34,BS5351,API608•ThreadperANSIB1.20.1•SocketperANSIB16.11•TestandInspectionperAPI598
Integralorweld-onextendedends
FIRESAFE CERTIFIED API 607 5TH EDITION AND API 6FA 3RD EDITION
*Optionalpuplengthsavailableaspermanufacturingdrawing
Size 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2”
ØD 6 10 15 20 25 32 40 50
L1*
L2 170 170 170 176 196 210 226 262
H 60 60 70 80 90 100 115 120
W 135 135 135 180 180 220 220 275
Weight (Kg) 0.9 8/9 1-1/9 1-3/5 2-2/7 3 5 7
W
L
L1/L2
H
ØD
AUSTRAL IAN P I P E L I N E VA LVE12
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
FS660 SERIES
2 PIECE BODY EXTENDED ENDS FS660 SERIES BALL VALVE
ThreadedANSI B1.20.1 or BSP
Socket WeldANSI B16.11
IntegralButt Weld
sch. 40 sch. 80to ANSI B16.25
Socket with nippleintegral or weld-on
available
L2
H
W
V
S
37°30”
L2 Normal extended ends patternL1 Special extra long pattern
W
H
TYPESOCKETWELD
TYPE THREADED
TYPEPLAIN
TYPEBUTTWELD
AUSTRAL IAN P I P E L I N E VA LVE 13
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
FS660 SERIES
FS660 SERIES EXTENDED ENDS
END CONNECTION TYPES
AUSTRAL IAN P I P E L I N E VA LVE14
DIMENSIONS
* The Cv factor is the gallons of water per minute that the valve will pass with 1 PSI pressure drop. 2 1⁄2” & 3” 3000 psi also available.
Size ØD L H W XCv*
INCH MM INCH MM INCH MM INCH MM INCH MM INCH MM
1/4” 8
0.50 12.7 2.72 69.0 2.64 67.0 4.80 122.0 1.61 41.03/8” 10
1/2” 15 16
3/4” 20 0.75 19.0 33.48 88.5 2.91 74.0 5.83 148.0 1.81 46.0 33
1” 25 1.00 25.40 4.02 102.0 3.15 80.06.61 168.0
47
1-1/4” 32 1.26 32.00 4.55 115.5 3.39 86.0 81
1-1/2” 40 1.50 38.00 4.88 124.0 4.76 121.010.23 260.0
105
2” 50 1.75 44.50 5.87 149.0 4.96 126.0 275
FEATURES• 3,000PSIcold,Non-shock• Proven Design• FullPort(2”sizeisfullporttoschedule160)• NylonorDelrinseats,PTFEorgraphiteseals• Heavydutyhandle• Stainlessballandstem• 2piecebody• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedueto thermalcycling.• ThreadedendsNPTANSIB1.20.1-API6A
OPTIONS• Padlocking device• Steam trim• BSPTBS21/ISO7-1ends
12
11
9
8
7
6
5
4
3
2
1
10 13
12
11
9
8
7
6
5
4
3
2
1
10 13
1/4” ~ 3/4” 1” ~ 2”
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
FS660 SERIES
2 PIECE BODY 3000 PSI BALL VALVE FS660 SERIES - (FS660-72) - PN# A72-100-AF26
MATERIAL LISTNo. Parts Stainless Steel Carbon Steel
1 Body ASTMA351-CF8M ASTMA216-WCB/A108
2 EndCap ASTMA351-CF8M ASTMA216-WCCB/A108
3 Seat NYLON/DELRIN NYLON/DELRIN
4 Ball ASTMA351-CF8M/316 ASTMA351-CF8/304
5 Gasket PTFE PTFE
6 ThrustWasher PTFE PTFE
7 Stem ASTMA276-316 ASTMA276-304
8 StemPacking PTFE/GRAPHITE PTFE/GRAPHITE
9 BellevilleWasher AISI301 AISI301
10 Handle AISI304 ZINCPLATEDSTEEL
11 HandleWasher AISI304 AISI304
12 Anti-VibrationNut AISI304 AISI301
13 HandleCover PVC PVC
P-T RATINGS
WO
RK
ING
PR
ESSU
RE
IN P
SIG
WO
RK
ING
PR
ESSU
RE
IN B
AR
NYLONN4500
3000
1500
0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
310.3
206.8
103.4
0.0
SERVICE TEMPERATURE
1⁄4”-2” D
DELRIND
N
Size ØD L H W
IN DN IN DN IN DN IN DN IN DN
1/2” 15 0.50 12.7 4.02 102 2.36 60 5.04 128
3/4” 20 0.75 19.1 4.25 108 2.68 68 5.91 150
1” 25 1.00 25.4 4.49 114 3.15 80 7.09 180
FEATURES
• Size Range DN15~25 (1/2”~1”)
• Pressure Rating 10,000 PSI
• End ConnectionFemale pipe thread to NPT, DIN259/2999 or BSPT/BS21/ISO 7-1
• Temperature Range -20°F to 428°F (-29°C to 220°C) with PEEK seats
No. Description Stainless Steel Carbon Steel Qty.
1 Body ASTMA276316 ASTMA108 1
2 BodyCap ASTMA276316 ASTMA108 1
3 Seat PEEK 2
4 Ball ASTMA351CF8M 1
5 BodyGasket PTFE 1
6 ThrustWasher PTFE 1
7 Stem ASTMA276316 1
8 StemPacking PTFE+Carbon 1
9 Gland AISI304 1
10 GlandPacking PTFE 1
11 SpringWasher AISI304 1
12 HandleNut AISI304 1
13 Handle AISI304 1
14 Sleeve VinylPlastisol 1
15 Anti-StaticDevice AISI316 1
16 BodyCapO-Ring Viton 1
17 StopPin AISI304 1
MATERIAL LIST
DIMENSIONS
17
8 10 9 11 12 13 14
7
6
5
16
15
4
3
2
1
W
H
ØD
L
AUSTRAL IAN P I P E L I N E VA LVE 15
FS660 SERIES
HEAVY DUTY FULL PORT BALL VALVE10,000 PSI - FS660 SERIES - (FS660-2H-D-E)
StyleS-KF
FEATURES• API 2000 to API 3000• Proven rugged design• Firesafe design• Emergency grease injection facility to stem
13
12
5
9
11
3
1
6
2
4
10
8
11
AUSTRAL IAN P I P E L I N E VA LVE16
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
FS660 SERIES
OILPATCH BALL VALVE 2000 TO 3000 PSI FS660 (FS660-SKF)
PARTS LIST & MATERIALSIndex Description Carbon Steel All SS
1 Body CarbonSteel 316SS
2 Adaptor CarbonSteel 316SS
3 Ball 316StainlessSteel
4 Stem 316StainlessSteel
5 StemBearing Nylon
6 BodySeal Viton
7 Seat NylonorPEEK
Index Description Carbon Steel All SS
8 StemSeal Viton
9 StopScrew Steel 316SS
10 ThrustBearing Teflon
11 Handle/Sq.Nut DuctileIron
12 StopPlate Steel+ZP 316SS
13 Retainer SpringSteel 316SS
Item PartsMaterial
QtyPC-NV PCH-NV PCS-NV PCL-NB
1 Body A216-WCB A351-CF8M A352-LCC 1
2 EndCaps A216-WCB A351-CF8M A352-LCC 1
3 Seats NylonMOS2 2
4 Ball A276-316 A276-316 1
5 Stem A276-316 A276-316 1
6 BodyO-Ring Viton NBR 1
7 Gasket PTFE PTFE 1
8 StemO-Ring Viton NBR 2
9 ThrustBearing PTFE PTFE 1
10 StopPlate Steel Steel 1
11 SnagRing Steel Steel 1
12 Handle A216-WCB A216-WCB 1
13 StopScrew Steel Steel 1
14 HandleBolt Steel Steel 1
15 PlasticCover Vinyl Vinyl 1
*3000PSIBrown
Size E F G H I J
- inch mm inch mm inch mm inch mm inch mm inch mm inch
2A 1”x 1” 43.3 1.703 19.9 0.783 15.88 0.625 9.5 0.374 30.5 1.201 10.5 0.413
2K 1-1/2”x1-1/2” 66.5 2.618 26.1 1.028 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413
2B 2”x1-1/2” 66.5 2.618 26.1 1.028 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413
2C 2”x2” 77.8 3.063 26 1.024 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413
2D 3”x2” 77.8 3.063 26 1.024 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413
2L 2-1/2”x2-1/2” 93 3.661 25.4 1 22.2 0.874 14.3 0.563 54 2.126 10.5 0.413
2E 3”x3” 101.6 4 34.9 1.374 31.7 1.248 15.8 0.622 54 2.126 10.5 0.413
2F 4”x3” 101.6 4 34.9 1.374 31.7 1.248 15.8 0.622 54 2.268 10.5 0.413
2M 4”x4” 125 4.921 34.3 1.35 34.8 1.37 18.9 0.744 54 2.126 10.5 0.413
DIMENSIONSPressure Rating (PSI)
Material WCB LCC SS
Colour Red Brown Black -
Size inch PC-NV PCH-NV PCL-NB PCS-NV
2A 1”x 1” 2500 3000 2500 -
2K 1-1/2”x1-1/2” 2500 - - -
2B 2”x1-1/2” 2500 3000 2500 3000
2C 2”x2” 2160 3000 2160 3000
2D 3”x2” 2160 - 2160 -
2L 2-1/2”x2-1/2” 2160 * - -
2E 3”x3” 1500 * 1500 -
2F 4”x3” 1500 - 1500 -
2M 4”x4” 750 - - -
* 21⁄2”, 3” 3000psi refer FS660.
TOP VIEW
PC-NVPCH-NVPCS-NVPCL-NB
14
13
78
9
1112
1 4
B
365
10
D
15
C
A
2
J
I
G
H
F
E
Size A (NB) B C D
- inch mm inch mm inch mm inch mm inch
2A 1”x 1” 25.4 1 101.6 4 79.7 3.14 160 6.3
2K 1-1/2”x1-1/2” 38.1 1.5 139.7 5.5 140.8 5.54 216 8.5
2B 2”x1-1/2” 38.1 1.5 139.7 5.5 140.8 5.54 216 8.5
2C† 2”x2” 50.8 2 152.4 6 152.1 5.9 216 8.5
2D 3”x2” 50.8 2 209.4 8.25 152.1 5.9 216 8.5
2L 2-1/2”x2-1/2” 65 2.56 177.8 7 167.5 6.59 381 15
2E 3”x3” 76.2 3 222.3 8.75 1.75 6.89 381 15
2F 4”x3” 76.2 3 222.3 8.75 1.75 6.89 381 15
2M 4”x4” 103.5 4.07 238.2 9.38 200.5 7.89 460 18.11
†Red(2160PSI)
Size C D
2C(Brown)* mm inch mm inch
2”x2” 150.7 5.93 381 15
Size d L B H HI E
1” FP 25 98 43 51 99 180
1-1/2” FP 38 133 65 83 115 200
2” RP 38 140 65 83 115 200
2” FP 50 146 78 92 124 280
DIMENSIONS:
No. PartsMaterial Standard
Material (NACE)Qty.
2000 WOG 5000* WOG
1 Body A216WCB A216WCB A216WCB 1
2 Cap A216WCB A216WCB A216WCB 1
3 Stem CarbonSteelZincPlated A311-79ClassB
A479-316 A479-316 1
4 LockingStopper C/S C/S C/S 1
5 LockingPlate C/S C/S C/S 1
6 Washer RPTFE RPTFE RPTFE 1
7 StemThrustWasher RPTFE RPTFE MOLON 1
8 Ball AISI1018Nickel ChromePlated
A351CF8M A351CF8M 1
9 Seat RPTFE RPTFE MOLON 2
10 O-Ring BUNA VITON VITON 1
11 Gasket Graphite Graphite Graphite 1
12 O-Ring BUNA VITON VITON 1
13 O-Ring BUNA VITON VITON 1
14 Handle C/S C/S C/S 1
15 Washer C/S C/S C/S 1
16 Bolt C/S C/S C/S 1
17 CapScrew C/S C/S C/S 1
18 CapScrew A193B7 A193B7M A193B7M 6
19 Ball 304 304 304 1
20 Spring 304 304 304 1
MATERIALS LIST:
*3000WOGinlargersizes.ConsultAPV.
*Largersizesareratedatlowerpressures.ConsultAPV.
*
*
Casing Ball Valve4.5”, 5.5”, 7”Refer to drawing.
AUSTRAL IAN P I P E L I N E VA LVE 17
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
326-FUS SERIES
OILPATCH BALL VALVE 2000 TO 5000 PSI326-FUS SERIES
FEATURES• 2 Piece, Full Port and Reduced Port • Bolted Construction •Blowout-ProofStemwithO-Ring •Anti-Static •ConformstoASMEB16.34 •NACEMR0175 • Fire Safe Design • Balon®Style
FEATURES• Screwedend,socketweldend,buttweldend, flangedendoranycombinationavailable.
• FiresafetoAPI6075theditionandAPI6FA.•DesigntoANSIB16.34/BS5351(dualconforming)• Class150to2500andAPI3000• Threepiece,enclosedboltdesign• Investmentcastorforged.• Anti-blowoutstem.• Fullboreforminimumpressuredrop.• Adjustablepackingnuttocompensatefortensionloss.• Lockinghandle(onrequest).•AntistaticdesigntoBS5351.• TestingtoAPI598.• ActuatormountingpadtoISO5211(asoption).• Vacuumservice(PTFESeat)downto 20microns(133pascals).
ØB
CØA
37.5°
BUTT WELD SOCKET WELD
P-T RATINGS
13
206
18789
101711 12
BUTTWELD(L1) SOCKETWELD
ØB
CØA
37.5°
BUTT WELD SOCKET WELD
P-T RATINGS
13
206
18789
101711 12
No. Parts Specification
1 Body A351-CF8M/316 A216-WCB/A105 A351-CN7M/A20 A352-LCB/LF2
2 EndCap A351-CF8M/316 A216-WCB/A105 A351-CN7M/A20 A352-LCB/LF2
3 Ball A276-316 A276-316 B437-A20 B437-A20
4 Seat RTFE/Delrin RTFE/Delrin RTFE/Delrin RTFE/Delrin
5 Gaskets PTFE/Graphite PTFE/Graphite PTFE/Graphite PTFE/Graphite
6 ThrustWasher PTFE/Graphite PTFE/Graphite PTFE/Graphite PTFE/Graphite
7 StemPacking PTFE/Graphite PTFE/Graphite PTFE/Graphite PTFE/Graphite
8 PackingGland 316 304 A20 A20
9 BellevilleWasher 301SS 301SS 301SS 301SS
10 Stem A276-316 A276-316 B437-A20 B437-A20
11 GlandNut SS304 SS304 SS304 SS304
12 SpringWasher 301SS 301SS A20 301SS
13 StemNut SS304 SS304 A20 SS304
14 Bolt A193Gr.B8M A194Gr.B7 A193Gr.B8 A320Gr.L7
15 Handle SS SS/Galv SS SS/Galv
16 Cover Plastic Plastic Plastic Plastic
17 StopWasher 304SS 304SS A20 304SS
18 StemO-Ring PTFE/Viton Viton PTFE Viton
19 StopPin 304SS 304SS A20 304SS
20 Anti-StaticDevice 304SS 304SS A20 304SS
BILL OF MATERIALS - 800 CLASS ONLY
14
19
15 16
5
4
3
2
1
Pressure Equalisation Hole
131211
17
10
9
8
7
18
6
20
Back Seated Stem Metal Sealing Surface
Backseat Face
Body
50NB
AUSTRAL IAN P I P E L I N E VA LVE18
BV100 SERIES
3 PIECE BODY CLASS 800 TO 2500 BALL VALVEBV100 SERIES
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
Nosafetyfactorisincluded.Whenconditionsbelowapply,thencalculatetorqueusingthefollowingapplicationfactors:
FREQUENCY OF OPERATION SERVICE CONDITIONSLessthanonceperweek +25% Lightslurrysemisolids +40%Lessthanoncepermonth +40% Heavyslurryandsomesolids +75%Lessthanonceperyear +60% Temperature- Minus40ºCtominus20ºC +75% Minus20ºCto0ºC +25% Over150ºC +40%
BREAK TORQUE VALVES (NM) - REINFORCED PTFE SEATS 800 CLASSValve
Size mmLine Pressure - Mpa Maximum Stem
Torque (Nm)1 2 3 4 5 7 9 10.3 13.88, 10, 15 13 14 15 16 17 17 18 18 20 35
20 19 20 21 22 23 24 25 26 29 4525 25 26 27 28 29 33 34 35 37 7532 28 29 29 30 32 35 37 38 40 8540 36 38 38 40 41 46 46 48 50 9050 45 45 45 46 48 51 51 52 55 25065 50 57 67 80 82 39080 110 130 144 148 154 390100 140 160 190 210 230
150PSIsaturatedsteam.CarbonPTFEandPEEKseatsalsoavailableforhighertemperatures.
P-T RATINGS UP TO 2500 CLASS
NYLONN6000
4000
3000
2000
1000
0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
413.4
275.8
206.8
137.9
68.9
0.0
WO
RK
ING
PR
ESSU
RE
IN P
SIG
SERVICE TEMPERATURE
WO
RK
ING
PR
ESSU
RE
IN B
AR
D DELRIN
1⁄4”-2”
1⁄4”-2”1⁄4”-2”
D
DN
P-T RATINGS UP TO 800 CLASS
PTFET2500
2000
1500
1000
500
0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)
172.4
137.9
103.4
68.9
34.4
0.0
WO
RK
ING
PR
ESSU
RE
IN P
SIG
SERVICE TEMPERATURE
WO
RK
ING
PR
ESSU
RE
IN B
AR
1⁄4”-2”
R R-PTFE N NYLON
21⁄2”-3”
4”
T
N
R
R
2500 Class
DIMENSIONS (MM) 800 CLASS FULL PORT*
Dimensionsareindicativeonlyandvaryaccordingtobodystyle.Refertoactualdrawing.ForReducedportallsizesrefertoseparatedrawings.
Size ØD L H W ØA ØB C WeightsN DN IN MM IN MM IN MM IN MM IN MM IN MM IN MM KG
1/4” 80.43 11.0 2.55 65.0
2.75 70.0 5.51 140.00.54 13.8 0.56 14.2
0.39 10.01.1
3/8” 10 0.68 17.3 0.69 17.6 1.11/2” 15 0.55 14.0 2.95 75.0 0.85 21.7 0.86 21.8 0.51 13.0 1.13/4” 20 0.80 20.5 3.14 80.0 3.54 90.0
7.08 180.01.07 27.2 1.07 27.2
0.59 15.01.6
1” 25 0.98 25.0 3.54 90.0 3.93 100.0 1.34 34.0 1.33 33.9 2.211/4” 32 1.24 31.5 4.33 110.0 4.40 112.0
8.46 215.01.68 42.7 1.68 42.7 3.3
11/2” 40 1.45 37.0 4.72 120.0 4.52 115.0 1.91 48.6 1.92 48.8 0.63 16.0 4.62” 50 1.96 50.0 5.51 140.0 5.23 133.0 2.38 60.5 2.41 61.2 0.67 17.0 7.3
2 1/2” 65 2.56 65.0 7.28 185.0 6.81 173.0 18.11 460 3.00 76.3 2.91 73.9 0.67 17.0 13.43” 80 3.15 80.0 8.07 205.0 7.24 184.0 18.11 460 3.51 89.1 3.54 89.8 0.67 17.0 21.04” 100 3.94 100.0 9.44 240.0 9.53 242.0 23.62 600 4.50 114.3 4.54 115.2 0.79 20.0 34.4
CF8M 800 Class 65NB ~ 100NB
Size in. Cv FactorGPM
8NB (1/4) 10
10NB (3/8) 10
15NB (1/2) 12
20NB (3/4) 35
25NB (1) 68
32NB (1-1/4) 105
40NB (1-1/2) 150
50NB (2) 290
CV FULL PORT 800 CLASS
AUSTRAL IAN P I P E L I N E VA LVE 19
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
BV100 SERIES
BV100 SERIES
Size (in) 2-1/2x2” 2-1/2” 3x2” 3” 4x3” 4” 6x4”
Size (mm) 65x50 65 80x50 80 100x80 100 150x100*
A 50 65 50 76 76 102 102
D 119 150 119 163 163 187 187
E 270 380 270 380 380 470 470
L (RF) 330 330 356 356 432 432 559
L (BW) 330 330 356 356 432 432 559
L (RTJ) 333 333 359 359 435 435 562
Weight (kg) 27 28 33 38 75 78 150
Torque (Nm) breakaway 125 140 125 195 195 350 350
Size (in) 1/2” 3/4x1/2” 3/4” 1x3/4” 1” 1-1/4x1” 1-1/4” 1-1/2x1/4” 1-1/2” 2x1-1/2” 2”
Size (mm) 15 20x15 20 25x20 25 32x25 32 40x32 40 50x40 50
A 15 15 19 19 25 25 32 32 38 38 50
D 82 82 87 87 92 92 105 105 108 108 119
E 145 145 170 170 170 170 270 270 270 270 270
L (RF) 216 229 229 254 254 279 279 305 305 368 368
L (BW) 216 229 229 254 254 279 279 305 305 368 368
L (RTJ) 216 229 229 254 254 279 279 305 305 371 371
Weight (kg) 10 11 14 15 17 19 23 25 28 30 34
Torque (Nm) 900* 21 21 33 33 68 68 90 90 135 135 139
Torque (Nm) 1500* 35 35 42 42 120 120 250 250 305 305 390
DIMENSIONS - ANSI-600LB
DIMENSIONS - ANSI-600LB
DIMENSIONS - ANSI-900/1500LB
Forged 3 Piece 600~2500LB
*150x 111mmstandardborealsoavailable.Refertodrawing.
2500lbRefertodrawing.AlsoseeBVF100-F26(SpecialServiceBallValves)forfloating 1500NB900/1500lb.AlsoseemodelBV1003piece.
L
E
D
ØA
(RF/BW/RTJ)
Flanged 2 Piece 600 to 2500LB
BV100 SERIES
BV100 SERIES
AUSTRAL IAN P I P E L I N E VA LVE20
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
Size (in) 1/2” 3/4x1/2” 3/4” 1x3/4” 1” 1-1/4x1” 1-1/4” 1-1/2x1/4” 1-1/2” 2x1-1/2” 2”
Size (mm) 15 20x15 20 25x20 25 32x25 32 40x32 40 50x40 50
A 15 15 19 19 25 25 32 32 38 38 50
D 82 82 87 87 92 92 105 105 108 108 119
E 145 145 170 170 170 170 270 270 270 270 270
L (RF) 165 190.5 190.5 216 229 229 241 241 292 292 292
L (BW) 165 190.5 190.5 216 216 229 229 241 241 292 292
L (RTJ) 163.5 190.5 190.5 216 216 229 229 241 241 295 295
Weight (kg) 5 7 7 9 10 14 15 17 18 20 22
Torque (Nm) breakaway 18 18 21 21 45 45 80 80 91 91 125
Flanged 2 Piece 600 to 2500LB
EXTENDED END TYPES(Fully Integral or Weld on)
TYPESOCKETWELD
TYPE THREADED
TYPEPLAIN
TYPEBUTTWELD
ThreadedNPT ANSI B1.20.1 or BSP
Socket WeldANSI B16.11
Butt Weldto ANSI B16.25
Integral
Socket with nipple weld-on or
Integral style
W
H
L
ØB
C
D
37°30”
INTEGRAL FLANGED (150 to 2500 Class)
NPT/SW/BW (Short / Standard Ends)
BV100 SERIES
BV100 SERIES - END CONNECTIONS
AUSTRAL IAN P I P E L I N E VA LVE 21
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
AUSTRAL IAN P I P E L I N E VA LVE22
No. Parts Stainless Carbon Steel
1 Body CF8M/316 A105/WCB
2 EndCap CF8M/316 A105/WCB
3a Gasket PTFE/TFM/Graphite PTFE/TFM/Graphite
3b SecondaryGasket TFM/PTFE TFM/PTFE
4 BallSeat PEEK/Delrin PEEK/Delrin
5 Ball StainlessSteel316 StainlessSteel316
6 Stem SS17-4PH SS17-4PH
7 ThrustWasher PEEK PEEK
8 StemPacking PTFE/TFM/Graphite PTFE/TFM/Graphite
9 PackingProtector PEEK PEEK
10 GlandHousing SS304 SS304
11 DiscWasher SS301 SS301
12 NutStop SS304 SS304
13 StemNut SS304 SS304
14 Handle SS304 SS304
15 HandleNut SS304 SS304
16 StopPin SS304 SS304
17 Bolts A193Gr.B8/BM A193Gr.B7
Size A B C D E F G H L Mount Pad* SW BW (S80)
in mm mm mm mm mm mm mm mm mm mm mm mm mm S T OD ID
1/4” 8 11 20.6 27 74 175 6.3 3/8 45 66 - - M5 14.2 11.1 13.8 7.8
3/8” 10 12.5 20.6 27 74 175 6.3 3/8 45 66 - - M5 17.5 11.1 17.2 10.2
1/2” 15 15 25.6 32 79 175 6.3 3/8 48 71 13 27 M5 21.8 12.7 21.4 13.8
3/4” 20 20 32 38 94 200 8.0 M12 63 92 19 30 M5 27.1 13.0 26.7 18.9
1” 25 25 41 43 99 250 9.7 M14 69 106 23 42 M5 33.8 13.0 33.4 24.3
1-1/2” 40 38 56 55 145 290 9.7 M18 82 140 40 58 M6 48.6 16.0 48.5 38.0
2” 50 50 72 76 189 350 12.0 M20 145 165 50 90 M10 61.1 16.0 60.5 48.9
TheBV100Series(7500PSIVersion)valvestructureandwallthicknessconformstoASMEB16.34standard.
TheBV100-7500Seriesisfullboreinallsizesandisalso availablewithaV-ballslotin15°,60°or90°fordifferentflowrate requirements.
SPECIFICATIONS• Class range: ANSI3000Class:-7500psi8NB~25NB(1/4”to1”) ANSI2500Class:-6000psi32NB~50NB(1-1/4”to2”)• Adjustablestempacking• Blow-out proof stem packing• Endconnections:Threaded,Socketweld, Buttweld,ExtendedSW,BW• ISOMounting• Full Port
OPTIONS• Firesafe• Springhandle(deadmanhandle)• Ovalhandle• Locking device• V-Ball for control Valve• Cryogenicoption• PTFE / PFA coating• SpecialAlloy-HastelloyC276/ Superduplex/Alloy20/Monel400 BILL OF MATERIALS
DIMENSIONS (mm)
*Optional
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
Butt Weld Socket Weld
BV100 SERIES
3 PIECE BODY 7500 PSI BALL VALVEBV100 SERIES
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
10,000 PSI trunnion version available in metal or soft seats.
10
9
8
7
6
5
4
3b
2
1
11 12 13 14 15
17
3a
L
B
E
H
C
D
ØA
PRESSURE TEMPERATURE
-50 0 100 200 300 400 500
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
DELRIN 1/4” ~ 2” PEEK 1/4” ~ 1” PEEK 1-1/2” & 2”
PRES
SUR
E (P
.S.I.
)
TEMPERATURE (°F)
Size A *Mount Pad SW BW(S80) BW(S160)
in mm SCH80 SCH160 J K M S T OD ID OD ID
1/4” 8 9.0 6.5 - - M5 14.2 11.1 13.8 7.8 - -
3/8” 10 12.5 9.0 - - M5 17.5 11.1 17.2 10.2 - -
1/2” 15 16.0 11.5 13 27 M5 21.8 12.7 21.4 13.8 21.4 11.8
3/4” 20 21.0 15.5 19 30 M5 27.1 13.0 26.7 18.9 26.7 15.6
1” 25 25.5 20.5 23 42 M5 33.8 13.0 33.4 24.3 33.4 20.8
1-1/2” 38 41.0 34.0 40 58 M6 48.6 16.0 48.5 38.0 48.5 34.0
2” 50 52.5 43.5 50 90 M10 61.1 16.0 60.5 48.9 60.5 42.8
DIMENSIONS (MM) INTEGRAL EXTENDED WELDING ENDS
*Optional
16
17
4
5
3a
3b
2
1
151413121110
9
8
7
6
ME
D
C
L
B
H
O.D I.D
1.6
37.5˚
ØA
ØS
J
O.D
Locked Open Locked Closed
AUSTRAL IAN P I P E L I N E VA LVE 23
BV100 SERIES
BV100 SERIES - 7500 PSI
Item Description Stainless Steel Carbon Steel Q’ty
1 Body ASTMA351CF8M ASTMA216WCB 1
2 BodyCap ASTMA351CF8M ASTMA216WCB 2
3 Ball ASTMA351CF8M/316(Hardened/Coatings) ASTMA351CF8M/316(Hardened/Coatings) 1
4 Seat ASTMA276316(Hardened/Coatings) ASTMA276316(Hardened/Coatings) 2
5 SeatGasket Graphite Graphite 2
6 SeatPacking AISI304 AISI304 2
7 SeatSpringJISG3565SWOCV-V/ASTMA276304ASTMB637InconelX-750
JISG3565SWOCV-V/ASTMA276304/ASTMB637InconelX-750
8-16
8 BodyGasketPTFE PTFE 2
Graphite Graphite 2
9 ThrustWasherPTFE PTFE 1
Graphite Graphite 1
10 StemPacking Graphite Graphite 1
11 Gland AISI304 AISI304 1
12 BellevilleWasher DIN1722150CrV4 DIN1722150CrV4 2
13 Stem ASTMA276316/ASTMA56417-4PH ASTMA276316/ASTMA56417-4PH 1
14 GlandNut AISI304 AISI304 1
15 LockClip AISI304 AISI304 1
16 SpringWasher AISI304 AISI304 1
17 HandleNut AISI304 AISI304 1
18 BodyBolt ASTMA193B8 ASTMA193B7 8-12
19 Handle AISI304 ZincPlatedSteel 1
20 Sleeve VinylPlastisol VinylPlastisol 1
21 StopPin AISI304 CarbonSteel 1
22 StemO-Ring Viton Viton 1
23 Anti-StaticDevice AISI316 AISI316 1
Size ØD L E F G H W ØA BISO 5211
Weights KGIN DN IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
1/4” 8 0.43 11.0 4.92 125.0 0.35 9.0 0.31 8.0 1.48 37.5 2.76 70.0 5.51 140.0 0.56 14.2 0.39 10.0 F04 1.4
3/8” 10 0.43 11.0 4.92 125.0 0.35 9.0 0.31 8.0 1.48 37.5 2.76 70.0 5.51 140.0 0.69 17.6 0.39 10.0 F04 1.3
1/2” 15 0.55 14.0 4.92 125.0 0.35 9.0 0.31 8.0 1.48 37.5 2.76 70.0 5.51 140.0 0.86 21.8 0.51 13.0 F04 1.3
3/4” 20 0.81 20.5 5.31 135.0 0.43 11.0 0.43 11.0 1.97 50.0 3.54 90.0 7.09 180.0 1.07 27.2 0.51 13.0 F04-F05 1.7
1” 25 0.98 25.0 5.91 150.0 0.43 11.0 0.43 11.0 2.36 60.0 3.94 100.0 7.09 180.0 1.33 33.9 0.59 15.0 F04-F05 2.8
1-1/4” 32 1.24 31.5 6.69 170.0 0.55 14.0 0.63 16.0 2.83 72.0 4.41 112.0 8.46 215.0 1.68 42.7 0.59 15.0 F07 3.3
1-1/2” 40 1.46 37.0 6.50 165.0 0.55 14.0 0.63 16.0 2.99 76.0 4.53 115.0 8.46 215.0 1.92 48.8 0.63 16.0 F10 5.4
2” 50 1.97 50.0 7.48 190.0 0.55 14.0 0.63 16.0 3.66 93.0 5.24 133.0 8.46 215.0 2.41 61.2 0.63 16.0 F10 8.8
DIMENSIONS
MATERIAL LIST
21
18
10 11 12 13 14 15 16 17 19 20
22
9
23
8
7
6
5
4
3
2
1
SOCKET WELD
ØA
H
GF
L
ØD
W
B
ISO 5211
E
AUSTRAL IAN P I P E L I N E VA LVE24
BV100-MS SERIES
BV100-MS SERIES (MODEL KI-L830) METAL SEATED BALL VALVE 8~50NB
• Size Range: 1/4” - 2” (DN8 - DN50) • Pressure Rating: 2000 PSI (800 Class) • End Connection: Threaded, Socket Weld & Buttweld • Service Application: Slurries, Pulp Stock, Solid-Containing Fluids • Firesafe API 607
Item Description Stainless Steel Carbon Steel Q’ty1 Body ASTMA351CF8M ASTMA216WCB 12 BodyCap ASTMA351CF8M ASTMA216WCB 23 Ball ASTMA351CF8M/316(Hardened/Coatings) ASTMA351CF8M/316(Hardened/Coatings) 14 Seat ASTMA276316(Hardened/Coatings) ASTMA276316(Hardened/Coatings) 25 SeatGasket Graphite Graphite 26 SeatPacking AISI304 AISI304 2
7 SeatSpringJISG3565SWOCV-V/ASTMA276304/ASTMB637InconelX-750
JISG3565SWOCV-V/ASTMA276304/ASTMB637InconelX-750
24-32
8 BodyGasketPTFE PTFE 2Graphite Graphite 2
9 ThrustWasherPTFE PTFE 1Graphite Graphite 1
10 StemPacking Graphite Graphite 211 Gland AISI304 AISI304 112 BellevilleWasher DIN1722150CrV4 DIN1722150CrV4 213 Stem ASTMA276316/ASTMA56417-4PH ASTMA276316/ASTMA56417-4PH 114 GlandNut AISI304 AISI304 115 LockClip AISI304 AISI304 116 SpringWasher AISI304 AISI304 117 HandleNut AISI304 AISI304 118 BodyBolt ASTMA193B8 ASTMA193B7 12-1619 Handle ASTMA351CF8 ASTMA216WCB 120 SteelPipe AISI304 CarbonSteel 121 Sleeve VinylPlastisol VinylPlastisol 122 FixingScrew(Pipe) AISI304 CarbonSteel 123 FixingScrew(Stem) AISI304 CarbonSteel 124 StopPin AISI304 CarbonSteel 125 StemO-Ring Viton Viton 126 Anti-StaticDevice AISI316 AISI316 1
Size ØD L E F G H W ØA CISO 5211
WeightsKGIN DN IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
2-1/2” 65 2.56 65.0 8.66 220 0.87 22 0.94 24 4.59 116.5 6.81 173 18.11 460 2.91 73.9 0.67 17 F07-F10 16
3” 80 3.15 80.0 9.84 250 0.87 22 0.94 24 5.00 127.0 7.24 184 18.11 460 3.54 89.8 0.67 17 F07-F10 24.6
4” 100 3.94 100.0 11.02 280 1.06 27 1.14 29 6.26 159.0 9.53 242 23.62 600 4.54 115.2 0.79 20 F10-F12 37.0
MATERIAL LIST
DIMENSIONS
21
22
23
17
24
9
25
8
7
6
5
4
3
2
1
SOCKET WELDLB
ØA
H
G
ØD
ISO 5211 W
E
F
10 11 12 13 14 15 16 18 19 20
AUSTRAL IAN P I P E L I N E VA LVE 25
326-FUS SERIES
BV100-MS SERIES (MODEL KI-L830)METAL SEATED BALL VALVE 65~80NB
• Size Range: 2-1/2” - 4” (DN65 - DN100)• Pressure Rating: 2000 PSI (800 Class)• End Connection: Threaded, Socket Weld & Buttweld• Service Application: Slurries, Pulp Stock, Solid-Containing Fluids• Firesafe API 607
AUSTRAL IAN P I P E L I N E VA LVE26
PRESSURE / TEMPERATURE1500 CLASS
0 100 200 300 400 500
PR
ES
SU
RE
(P.S
.I.)
-50
1000
800
600
400
200
2200
2000
1800
1600
1400
1200
600
PRESSURE/ TEMPERATURE
3200
3000
2800
2600
2400
3600
3400
DELRIN PEEK PEEK +30% CARBON
TEMPERATURE (˚F)
PRESSURE / TEMPERATURE900 CLASSPRESSURE/ TEMPERATURE
0 100 200 300 400 500
PR
ES
SU
RE
(P.S
.I.)
-50
1000
800
600
400
200
2200
2000
1800
1600
1400
1200
600
RPTFE TFM DELRIN PEEK
TFM4215
TEMPERATURE (˚F)
BLOCK
WELDING
BLEED BALL VALVE
SOCKETWELD BUTTWELD
L
NPT
OPTIONS• Fire safe design•Springreturnhandle(deadmanhandle)•Steamjacketing•Cryogenicbonnet•Fugitiveemissionbonnet• HastalloyC/Superduplex/Alloy20/Monel
FEATURES•Body&endcapsinvestmentcast•Fullbore&Std.boredesign•Adjustablestempacking• Blow-out proof stem design• Locking device• Endtypes:threaded/socketweld/buttweld
Twopressureratingsareavailable:-2160psi(Class900)and3600psi(Class1500).Stainlesssteel,carbonsteelorspecialalloysteelcanbesupplied.
Allthevalvesondoubleblock&bleedvalvearewithISO5211directmountingpadforautomation.The900classvalvesaresuppliedwithTFM1600,(Delrin),orRPTFEseats,1500classhavePEEK5004.
Valveconstruction&wallthicknessiscompliantwithANSIB16.34wallthicknessrequirements.V-ballwith30°,60°,or90°portisavailableas anoptionfordifferentflowratepipelinedesigns.
BV100 SERIES
DOUBLE BLOCK & BLEED BALL VALVE CLASS 900 TO 1500 BV100 - DB300 SERIES
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
32~50NB (1-1/4”~2”) 50NB (2”)
14 15 1617
18 19
6
7B
7A
8
9
10
11
12
13
5 3 2 120 4
21 22
No. Parts Stainless1 EndCap CF8M2 Body CF8M3 Ball SS3164 Seats PEEK/Delrin5 Gasket PTFE/Graphite6 Bolts SS3047.1 ThrustWasher PTFE/Graphite7.2 ThrustWasher PEEK8 Stem CF8M9 StemPacking PTFE/Graphite10 GlandWasher SS30411 DiscWasher SS30112 GlandNut SS30413 NutStop SS30414 SpaceWasher SS30415 StopPlate SS30416 StemNut SS30417 StopPin SS30418 Lever SS30419 LeverCover Vinyl20 Block CF8M21 Pipe CF8M22 BleedBallValve23 Lever SteelPipe24 Gland CF825 Bolts SS304
MATERIALS LIST
Size Flow Coefficient1/2” 193/4” 37
1” 591-1/4” 841-1/2” 145
2” 249
FLOW COEFFICIENT 900 CLASS
15NB~25NB (1/2”~1”)
EXPLOSION “A”
252423
5
4
7A
7B
22
50NB (2”)
BV100-MS SERIES
BV100 - DB300 SERIES
AUSTRAL IAN P I P E L I N E VA LVE 27
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
DIMENSIONSSize A B C D d1 d2 F G H L
mm inch mm mm mm mm mm mm mm mm mm mm
15 1/2” 48 9.5 130 15 6.0 6.0 36 G 9 123.8
20 3/4” 53 12 155 20 6.0 6.0 42 50 11 152
25 1” 59 12 155 25 6.0 7.0 42 50 11 174
32 1-1/4” 74 16 205 32 7.0 9.2 50 70 14 233
40 1-1/2” 80 16 205 38 7.0 9.2 50 70 14 266
50 2” 96 20 350 50 9.2 11.4 70 102 17 336
Size A B C D E
in mm in mm in mm in mm in mm in mm
1/4” 8 0.377 9.6 1.122 28.5 2.244 57.0 1.161 29.5 7.244 184
3/8” 10 0.492 12.5 1.122 28.5 2.244 57.0 1.161 29.5 7.244 184
1/2” 15 0.59 15 1.301 33.05 2.602 66.1 1.287 32.7 7.244 184
3/4” 20 0.787 20 1.488 37.8 2.976 75.6 1.440 36.6 7.244 184
1” 25 0.984 25 1.716 43.6 3.433 87.2 1.779 45.2 9.212 234
1-1/4” 32 1.259 32 1.909 48.5 3.818 97.0 2.106 53.5 12.920 330
1-1/2” 40 1.496 38 2.283 56.6 4.456 113.2 2.342 59.5 12.920 330
2” 50 1.968 50 2.637 67.0 5.275 134.0 2.807 71.3 12.920 330
DIMENSIONS
Available up to 100NB (4”).
No. Part Name Material
1 Body A351-CF8M A216-WCB
2 EndCap A351-CF8M A216-WCB
3 Ball ASTMA351Gr.CF8M
4 BallSeat RPTFE
5 BodySeal PTFE
6 Stem A276TYPE316
7 ThrustWasher RPTFE
8 StemPacking RPTFE
9 GlandNut SUS304
10 StemWasher SUS304
11 StemNut SUS304
12 HandleHead A351-CF8&SS304
13 Bolt SUS304
14 HandleFlange A351-CF8
15 HandleSleeve VINYL
16 HandleBolt SUS304
17 Spring 55CrSi
18 SpringRod SUSSS304/316
19 SpringRodBinder SS304
20 TubeHandle SS304
21 TensionAdjustmentWasher SS304
22 HexNut SS304
MATERIALS LIST
PRESSURE TEMPERATURE RATING
50 100 150 200 250 300 350 400 450 500
2000
1600
1200
800
400
0
Optional ZI locking device c/w ISO Mount pad
SADDLE
BARRED PLATELOCK
FEATURES• Full Port• Spring Return Handle• Investment Cast Body• Blow Out Proof Stem/ Floating Ball• Adjustable Packing Gland• 150 PSI Saturated Steam• Working Pressure 13789 kPa (2000PSI) WOG• Threads Conform to ANSI B1.20.1, BS21, DIN259/2999• Also available in 3 piece body• Also available in 3000 PSI, 3700 PSI• Available in BSP or NPT ends• Available in Bronze, SS & Carbon Steel
AUSTRAL IAN P I P E L I N E VA LVE28
SPRING RETURN DEADMAN HANDLE
DEADMAN SPRING RETURN BALL VALVE(FULL PORT) S-76-500 SERIES
13452
131110968
MG
H
D
C
A
B
1614
2015
1817
2122
12
13
19
E
7
Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.
Item Part Name Quantity Materials1 HandleHead 1 CF82 Anchor 1 CF83 AnchorScrew 1 SS3044 SpringRod 1 SS304
4A SpringRodAnchor 1 SS3045 Spring 1 SS3016 HandleExtension 1 SS3047 Sleeve 1 PVC8 Washer 2 SS3049 HexNut 2 SS30410 SocketHeadScrews 2 SS30411 Washer 1 SS30412 Nut 1 SS304
MATERIALS LIST
Kit Part No. L J D (ISO 5211) TorqueS71-504-00-Z 170 9 F03/F04 15NmS71-507-00-Z 207 9 F03/F04 20NmS71-507-01-Z 220 11 F04/F05 20NmS71-508-00-Z 275 11 F04/F05 30NmS71-508-01-Z 280 14 F05/F07 30NmS71-509-01-Z 450 14 F05/F07 55Nm
DIMENSIONS & TORQUE
SPRING RETURN DEADMAN HANDLE FOR QUARTER TURN VALVES S71(-Z) SERIES (KITS)
SPRING RETURN DEADMAN HANDLE
FEATURES• All components of lever are stainless steel• Operating torque should be sized according
to valve torque, media, pressure and safety.• Can be fi tted on 1P, 2P, 3P valve• Available in ISO F03 to F07• 55CrSi Spring Material
AUSTRAL IAN P I P E L I N E VA LVE 29
OPEN
2
1
3
4A
5
6
7
8
9
10
11 12
4
CLOSE
SS304SWPSS304
SS304
BOLT7
98
6
WASHERSPRING
HANDEL HEX
SS304
VINYL
SS304NUT10
1211
HANDLE SLEEVE
HANDLE
CF8SS304
MATERIAL
SS304
CF8SS304
NO.12
HANDEL GLANDPART NAME
HANDLE BOLT
NUT
3
5
4 WASHER
HANDLE
1
1
11
2
11
Q'TY12
1
11
6 7
SS304SWPSS304
SS304
BOLT7
98
6
WASHERSPRING
HANDEL HEX
SS304
VINYL
SS304NUT10
1211
HANDLE SLEEVE
HANDLE
CF8SS304
MATERIAL
SS304
CF8SS304
NO.12
HANDEL GLANDPART NAME
HANDLE BOLT
NUT
3
5
4 WASHER
HANDLE
1
1
11
2
11
Q'TY12
1
11
12
11
2
10
1
10
SS304SWPSS304
SS304
BOLT7
98
6
WASHERSPRING
HANDEL HEX
SS304
VINYL
SS304NUT10
1211
HANDLE SLEEVE
HANDLE
CF8SS304
MATERIAL
SS304
CF8SS304
NO.12
HANDEL GLANDPART NAME
HANDLE BOLT
NUT
3
5
4 WASHER
HANDLE
1
1
11
2
11
Q'TY12
1
11
3
4A
5
9
8
4
10
Model S71 (100NM Torque)see Flowturn Multiway &
Deadman Ball Valves CatalogueLOCK
1 2 3 4 5 6 7 8 9 10 11
End Connection2
Model 1
FS900
BV100
BV100-DB300
FS660
FS660-72
FS660-SKF
VT3
VT3B
T203SR
A NPT
B BSP
C Socketweld
D NPTxSocketweld
E Buttweld
F Buttweldpupend
G Plainpupend
H Socketweldpupend
J FlangedRF
K FlangedRTJ
Z Special
Operation Type3
D DeadmanSpringLever
E ElectricOperator
G GearOperator
K LockableLever
L LeverOperator
P PneumaticOperated
Z Other
1Fullbore2piecethreadedbody
2Reducedbore2piecethreadedbody
3Fullbore3pieceboltedbody
4Reducedbore3pieceboltedbody
5Reducedbore1piece
6Fullbore2piecebody,sealwelded
7Reducedbore2piecebody,sealwelded
8Fullbore2pieceboltedbody
9Reducedbore2pieceboltedbody
0 DoubleBlock&Bleed
Body & Bore Type4
For Metal Seated see separate partnumbersystem
A Class150
B Class300
C Class400
D Class600
E Class800
F Class900
G Class1500
H Class2500
J 800PSIWOG
K 1000PSIWOG
L 3000PSIAPI
M 5000PSIAPI
N 6000PSIAPI
O 7500PSIAPI
Pressure 5
Seat
Body Material
6
7
C CarbonreinforcedPTFE
D Devlon
E Peek
F PurePTFE
G CarbonFibre(Graphite)
H GlassReinforcedPTFE
(GlassFibreContent20%)
N Nylon
T Tefzel
U Delrin
V Viton
X NBR
Z Other
A WCB
B A105/A105N
C LCB(lowtemperature≥-46C)
D LF2(lowtemperature≥-46C)
E CF8
F 304
G CF8M
H 316
I CF3M
J 316L
K CF3
L WC6
M WC9
N F51/CD3MN
O F55/CE3MN
P CE8M
Z Other
B V 1 0 0 - A L 3 G N A A B D I M
12
A 316/CF8M
B 304/CF8
C ENP(.003”)
D LCB(≥-46C)
E F51/CD3MN
F WC6
G WC9
K 304L/CF3
I 316L/CF3M
Z Other
Trim Code8
A PTFEB GraphiteC Graphite/VitonZ Special
Stem Sealing9
Blank None
1 B7
2 B7M
3 B8
4 B8M
5 Duplex
6 L7
7 L7M
9 Special
B Bleed
G GreaseInjection
M DirectMountPad
V VentedBall
Other Features12
Bolting11
Blank NoneA PTFEB Graphite(GRP)C Graphite+VitonD Graphite+PTFEZ Special
Body Gasket10
PART NUMBER SYSTEM
PART NUMBERS FOR SMALL DIAMETER BALL VALVES - FLOATING
AUSTRAL IAN P I P E L I N E VA LVE30
AustralianPipelineValvedon’tconsiderinourdesignthefollowingfactorsofrisk:
1. AustralianPipelineValve‘Standard’ballvalvescanbeusedinatemperaturerangebetween-28.8to+200°C. (Note,pressurelimitationsapplyabove38°CrefertoPressure/Temperaturecharts.)Forservicetemperatures below-28.8°Cballvalveconstructionmaterialsshallbesubmittedtoanimpacttestattheminimumservice temperature.Fortemperaturesoutsideoftherangeof-28.8°Cto+200°Cballvalveshavetobeprovidedwith seats,sealsandbodymaterialabletowithstandthetemperaturedegreerequired.
2. Theonusisonthecustomertospecifyallmaterialsofconstructionandserviceconditions.AustralianPipeline Valveshallassumestandardmaterialsandconditionsifnototherwisespecified.
3. AustralianPipelineValve‘Standard’ballvalvesarenotequippedwithdevicessuitabletoavoidinternal over-pressurescausedbyincorrectoperationsofprocessorby-fluids&liquidssubjectedtoanincreaseof volumeand/orpressure(thesedevices,suchastheover-pressureholeintheballorsafetyseatsareavailable uponrequest).
4. AustralianPipelineValve‘Standard’ballvalvesarenotdesignedwithspecialdevicestowithstandasudden thermaljump(thermalshock).
5. IngeneralAustralianPipelineValve‘Standard’ballvalvesarenotmechanicallydesignedtobearoverloadsdue toexceptionalatmosphericornaturalphenomenon’s(suchasearthquakes).
6. IngeneralAustralianPipelineValve‘Standard’ballvalvesarenotdesignedtobearloadsonflanges,onpipe connectionsorpipeline.
7. IngeneralAustralianPipelineValve‘Standard’ballvalvescan’twithstandiceinsidetheirbodies(inthiscase usermustspecifytheoptionalstemextensionforinsulating,avoidingthepresenceofresidualproductinside thevalve).
8. AustralianPipelineValve‘Standard’ballvalvesarenotsuitableforlowtemperatureservicebelow-29°C(-20°F) unlessprovidedwithcryogenicstemextensionandothermodifications(availableonrequest).
9. AustralianPipelineValve‘Standard’ballvalvesaresuitablefor‘industrial’oxygen(notmedical)servicewhen supplieddegreasedandpackedinpolyethylenebagsonly.
10. Thecompatibilitybetweenballvalvesconstructionmaterialsandmediumisselectedbytheuser.Theuseris ultimatelyresponsibleforverifyingthecompatibilitybetweenmediumandmaterials.
11. Abrasiveordirtyservice,hightemperatureservice,lowtemperatureservice,vacuumservice,nearzero pressureserviceandotherspecialapplicationsshouldbeclearlystatedwhenrequestingquotation.
BALL VALVE START-UP
Beforeinstallingtheballvalveontothepipe-lineitismandatoryfortheusertoverifythecompatibilityoftheballvalvewithserviceconditions(medium,temperatureandpressure).Withreferencetostandardballvalvesheldinstocktheresellerandenduserwillhavetoassurethemselvesofthecompatibilitywiththeuseofconditionsrequiredbythecustomer.AustralianPipelineValveballvalvesmustbeonlyusedforon-off(fullyopen/fullyclosed)service.
Beforeusingtheballvalveinapotentialexplosiveatmosphereit’snecessary:-
• Toverifythecompatibilitybetweentheballvalveandthezoneinwhichtheballvalveshouldbeinstalled.• Toforeseethepipe-linegroundconditiononwhichtheballvalveshouldbeinstalled.• Tocheckthatthetemperatureiftheballvalvesurfaceisnothigherthantheflammablepointoftheatmosphere inwhichtheballvalveisinstalled(inthiscasespecifyaninsulatingcoverdeviceforthevalveandanextension forthewrench)• Beforeinstallingballvalveswithweldingendstomakesurethattheprocessofweldingiscarriedoutin accordancewithallthesafetyrequirementsoftheclassifiedzone.• Toavoidmechanicalknocksduringtheinstallationthatmaycausesparks.
Australian Pipeline Valve cannot be held responsible for damage caused by use of the product especially if it is improper use or modified.
TECHNICAL
CONSIDERATIONS OF TECHNICAL RISK / LIMIT OF LIABILITY TO CLIENT FOR BALL VALVES
AUSTRAL IAN P I P E L I N E VA LVE 31
AUSTRAL IAN P I P E L I N E VA LVE
NOTES
NOTES
AUSTRAL IAN P I P E L I N E VA LVE
AUSTRAL IAN P I P E L I N E VA LVE
NOTES
View our catalogues at www.australianpipelinevalve.com.au
AUSTRALIAN PIPELINE VALVE BRAND RANGE - CATALOGUES
APV FAMILY OF BRANDS RANGE - CATALOGUES
COMPLETE PRODUCT LINE
“Australian Pipeline Valve
produces isolation,
control and flow reversal
protection products for
severe and critical service
media in utility, steam,
pipelines, oil & gas
and process industries.
APV valves and pipeline
products form the most
competitive portfolio
in the market.”
Oilfield Products Valves & Wellheads
Gate, Globe & Check Valves - Forged Steel
Plug Valves Lubricated, Sleeved & Lined
Gate, Globe & Check Valves - Cast Steel
Diamond Gear Gearboxes
Flowturn Gate, Globe & Check Valves
Flowturn Instrument Valves
Flowturn Ball Valves Multiway & Deadman
Flowturn Strainers & Sight Glasses
Supercheck Wafer Check Valves
Superseal Butterfly Valves
Steamco Steam Valves
Superseal Industrial Ball Valves
TwinLok Tube Fittings Uniflo Check ValvesTorqturn Actuators
Ball Valves Floating & Trunnion Mounted
Ball Valves Floating Small Bore
Ball ValvesSpecial Service
Product Brochure
Contact us for your local stockist/distributor
QUALITY ASSURANCE AND CERTIFICATIONWe are continually improving all facets of quality assurance. Full metallurgical and test certificates arealways supplied for all pressure retaining parts, we can also provide it on major trim components.
We have endeavoured to provide a broad outline of our range and capabilities. Because we are continually developing new productsfor our customers this catalogue will, to some extent be incomplete. This catalogue is a general overview only, individual drawingsand data sheets can be furnished on request.
If you have any requirement in the field of valves, please contact us for a prompt response. Continuous development ofAustralian Pipeline Valve products may necessitate changes in the design or manufacturing processes. Australian Pipeline Valvereserves the right to effect any such changes without prior notice.
www.australianpipelinevalve.com.au
© Australian Pipeline Valve 1990 - 2019 Edition
LOCAL DISTRIBUTOR
A D E L A I D E • B R I S B A N E • P E R T H
Global Supply Line is a distributor & stockist, supplying worldwide.Full stock list online www.globalsupplyline.com.au
Contact email: [email protected]