www.sodeco-valves.com 1 31/08/2017 E D A L B C DN Ø A L B EL C D E Kg 15 1/2” 54,0 140 21,5 EL55 61,5 316,5 95 8,45 20 3/4” 60,0 152 26 EL55 66 321 95 8,95 25 1” 65,0 165 29 EL55 69 324 95 10,95 40 11/2” 72,0 190 51 EL55 91 346 95 15,35 50 2” 75,1 216 61,5 EL55 101,5 356,5 95 18,05 80 3” 88,0 283 76 EL100 136 428 120 33,95 100 4” 104,1 305 92,5 EL200 152,5 467,5 140,5 46,95 150 6” 125,0 403 129 EL500 209 527 166 88,55 200 8” 135,0 419 158 EL800 258 614 166 138,55 Subject to changes BALL VALVE - 730 SERIES Electric actuator - El-O-matic DIMENSIONS: (mm) The electric actuator is calculated with a safety factor of 30% and max. differential pressure of 50 bar. For standard working conditions. OPTIONS: 2 additional limit switches, potentiometer, speed control, positioner.
11
Embed
BALL VALVE - 730 SERIES Electric actuator - El-O-maticshop.sodeco-valves.com/Content/Tech/en-us/730_EL.pdfThe electric actuator is calculated with a safety factor of 30% and max. differential
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
The electric actuator is calculated with a safety factor of 30% and max. differential pressure of 50 bar.For standard working conditions. OPTIONS: 2 additional limit switches, potentiometer, speed control, positioner.
www.sodeco-valves.com1 26/04/2016
Sub
ject
to
ch
an
ge
s
GENERAL FEATURES:- One-piece body - floating ball - reduced bore - blow out proof stem- Anti-static device according to BS 5351 and ISO 7121- Cavity balancing hole (standard= 5 mm diameter) in the top of the ball avoids overpressure in the cavity- All valves meet the TA Luft requirements - CE and ATEX marked- ANSI 300, 1/2” - 8”- Max. temperatures: -29°C ~ 230°C (AIT) and -50°C ~ 230°C (IIT)
FLANGED BALL VALVE730 SERIES - ANSI 300
DESIGN STANDARDS
Valves design API 6D, ASME B16.34, EN ISO 17292
Body design ASME VIII Div.1
Shell thickness ASME B16.34
Flanges ASME B16.5 Raised face
Face to face dimensions ASME B16.10 short pattern, API 6D, EN 558-2 series 3 & 4
Actuator mounting flange ISO 5211
Wetted parts materials and bolting NACE MR.01.75
Shell finishing quality MSS SP 55
Marking API 6D, EN ISO 17292, CE-PED, EN 19
TESTS AND CERTIFICATES
Quality Assurance ISO 9001, API Q1, CE-PED
Fire Safe certification BS 6755 Part 2, API 6FA, ISO 10497, API 607
Pressure testing API 598, ISO 5208, EN 12266
Other ISO 14001, ATEX
www.sodeco-valves.com2 12/09/2016
11374
2
3
8
10
11
18
41
7
12
72
14
9
46
5
17
16
6
4
39
89
19
Sub
ject
to
ch
an
ge
s
FLANGED BALL VALVE730 SERIES - Materials
Item DescriptionMaterials
AIT IIT1 Body A 216 Gr. WCB (C≤ 0,25%) A 351 Gr. CF8M
2 Body connector A 350 Gr. LF2A 351 Gr. CF8M
(DN 15: 40 A 276/479 Tp.316)
3 Ball A 351 Gr. CF8M (DN 15 : 25 A 479 Tp.316)
4 Stem A 479 Tp.316
5 Seat ring PTFE
6 Wrench Nodular Iron
7 Gland nut Zinc plated carbon steel AISI 303
8 Disk spring Carbon Steel Stainless steel A666
9 Stop plate Carbon Steel AISI 304
10 Gland AISI 303 AISI 316
11 Gland packing Graphite
12 Stem thrust seal 25% G.F. PTFE
13 Body connector seal AISI 316L + PTFE + Graphite
GENERAL FEATURES:- Rotation angle 90° ±3°, adjustable by limit switches: 10° to 320° - Enclosure: IP65 (IP67 optional) - Working temperature: -20 °C ~ 70 °C - Electrical connection: 12 and/or 16 point terminal block - Limit switches: 4x SPDT V3 micro switches - Torque switches: 2x SPDT V3 micro switches (not on EL-55)- Heater- Emergency manual controls MOTOR VOLTAGES AND TYPES:EL: AC single phase: 220 - 280 VAC 50/60 Hz (DIN connection)ELISO: AC single phase: 220 - 280 VAC 50/60 Hz (ISO connection)ELL: DC: 24 VDC (DIN connection)ELLISO: DC: 24 VDC (ISO connection)ELH: AC three phase: 380 - 460 VAC 50/60 Hz (DIN connection)ELHISO: AC three phase: 380 - 460 VAC 50/60 Hz (ISO connection)