Bale Transport Devices - Catalogs

for round and square bales

Bale Transport Devices

GÖWEIL Maschinenbau GmbH

Bale Transport DevicesSince 1988 the wrapper expert GÖWEIL has offered a high quality product range of bale wrapping and baler technology. The production of the tried and tested Bale transport devices is an another important part of business.

All the various machines and devices are designed, developed and manufactured at the GÖWEIL headquarter in Austria.

Over decades GÖWEIL has established itself as a worldwide specialist in manufacture of agriculture machinery. Due to an extremely high export quota GÖWEIL machines and devices are known and used in all over Europe as well as in Canada, Egypt and New Zealand.

For product development and production of the Bale transport de-vices GÖWEIL relies on in-house expertise.

All GÖWEIL products are purpose designed for particular function and represent the state of the art.

GÖWEIL / Bale Transport Devices / Page 02-03

Davidschlag 11 / 4202 Kirchschlag / Austria

Tel: +43 (0)7215 2131-0 / Fax: +43 (0)7215 2131-9

[email protected] / www.goeweil.com

950

460

TDE Single Bale Transport Spike

The Bale Transport Spike was especially designed for transporting unwrapped round bales.Thanks to the tine guard, the TDE is also applicable for road transport.

• Reinforced tines (Ø 42 mm, Length 1.100 mm)

• Three-Point Linkage Cat. I and Cat. II

• Weight: 45 kg

• L x W x H / 1.150 x 980 x 690 mm

Basic Equipment / Technical Data

Bale Transport Spike with tine guard

Dimensioning in mm

Mounting Options:• Adaptor Weiste triangle

950

600

600

TDD Twin Bale Transport Spike

This transport spike was developed for transporting two unwrapped round bales or one square bale.Because of the tine guard the TDD is also applicable for road transport.

• Reinforced tines (Ø 42 mm, length 1.100 mm)


• Weight: 85 kg

• L x W x H / 1.150 x 2.000 x 690 mm


For round or square bales

Dimensioning in mm



1.670

600

1.200

BTGHYRound Bale Transport Fork Hydraulic

For transporting and stacking wrapped or unwrapped round bales.The hydraulically articulated fork pipes which are also rotatable thanks to integrated ball bearings guarantee that the work flow is extremely gentle and damage free.

• Single or double-acting hydraulic control device required

• For bale diameters of 900 - 1.800 mm


• Max. operating pressure: 200 bar

• Weight: 190 kg

• L x W x H / 1.600 x 1.300 x 960 mm


Dimensioning in mm

Mounting Options:

• Hauer type B quick-change unit, MX• Euro capture frame• Weidemann hydr., Kramer/Schäffer hydr.,JCB Q-Fit, JCB 515-40 Q-FIT,• Manitou, Claas Scorpion, Dieci, Volvo BM, Hydrema, CAT-907, Liebherr-L507,

Atlas, Amkodor, Zettlmeyer 402• Adaptor Weiste triangle• Merlo, Merlo ZM3 - incl. blocking valve with pressure limit valve• Pressure limit valve

(necessary for wheel- & telescopic loaders with working pressure over 200 bar)• Others on request

Additional Equipment:

Kit for conversion to bale transport spike.This kit ensures a quick and easy conversion from a transport fork into a transport spike (reinforced tines, diameter 42 mm, length 1.100 mm) which can also be used for transporting square bales.

Instead of being installed inside the pipes, the tines are screwed on separately. This ensures that the device is truly sturdy whether it is used as a transport fork or a transport spike.

• Single or double-acting hydraulic control device required

• For bale diameters of 900 - 1.800 mm



• Weight: 190 kg

• L x W x H / 1.600 x 1.300 x 960 mm

Ideal Bale pick-up by slim fork pipes Mounting Option: Three-Point Linkage Cat. I and II

Operation in stationary use Easy loading of trailers

Additional equipment: Kit for conversion to bale transport spike Applicable for transporting square bales


800

1.80060

RBGRound Bale Grab

For easiest loading and stacking of any kind of bales (silage, hay and straw). The round design ensures a unique gentle and smooth grip. The film can not be overstretched or get damaged because the pressure is distributed evenly. Another characteristic feature is the slim and short design which keeps the centre of gravity close to the front loader.


• Double-acting hydraulic control device required

• For bale diameters of 1.000 - 1.600 mm


• Weight: 190 kg

• L x W x H / 1.200 x 1.360 x 800 mm

• TypeRBG140 for bale diameters of 0.80 - 1.40 m

WithoutMounting

Dimensioning in mm

1.

2.

Centre of gravity close to loader Easy loading of trailers

Additional equipment: Small-Bale Adapter Mounting option: Three-Point Linkage Cat. I and Cat. II

Gentle stacking because of round design Round design and swivel compensator

Mounting Options:

• Hauer type B quick-change unit, MX, SMS• Euro capture frame• Three-point linkage• JCB Q-FIT, JCB 515-40 Q-FIT, Claas Scorpion, Weidemann and Kramer/Schäffer

hydraulic, Dieci, Manitou, CAT-907H, Atlas, Liebherr-L507 and 514, Dieci-Dedalus, Zettelmeyer 402, Faresin

• Adaptor Weiste triangle (three-point-linkage neccessary)• Merlo, Merlo ZM3 - incl. blocking valve with pressure limit valve• Pressure limit valve (necessary for wheel- & telescopic loaders with working pressure over 200 bar)• Others on request

Additional Equipment:

Small-Bale Adapter. This device is screwed on the frame and is used for trans-porting small bales. (Diameters of 900 - 1.400 mm).

1. The unique shape of the gripper arms prevents damage of a bale stacked on top of another bale.

2. The swivel compensator ensures an especially gentle “adjustment” of the gripper arms. If the bale should not be clamped in its centre, the gripper arms can fit independent of each other to the bale, which prevents the bale from shifting while being picked up.


400

2.440

1.050

DTRDouble Transport Frame

The Double Transport Frame was designed to carry two Round Bale Transport Forks BTGME or BTGHA which can be mounted with only a few steps. On the right hand side, the transport fork is fixed. On the left hand side the transport fork is mounted on a hydraulic transport cart which is adjustable in height. The DTR can carry two round bales with a diameter of up to 1.600 mm at once.


• Three-Point Linkage Cat. II


• Weight (without transport forks): 212 kg

• L x W x H / 400 x 2.440 x 1.050 mm

WithoutBaleTransportForks


Dimensioning in mm


Function Description

The transport fork which is mounted on the hydraulically adjustable transport cart is used to take up the first bale while the additional hyd-raulic system lifts the bale up to a height of up to 380 mm.

So the second bale can be loaded without depositing the first bale. This unique system ensures that the first bale does not get damaged because it is lifted up.

1. Take-Up of the first bale >> 2. Additional hydraulic lifts the first bale up to 380 mm >>

3. Simultaneous take up of a second bale >> 4. Two bales ready loaded >>

5. Simultaneous deposit of two bales at storage area Operation with BTGHA


850

1.250

1.200

Quick-release fastener for adjusting the opening area

Opened fork pipes for road transport


BTGME Round Bale Transport Fork Mechanical

The Bale Transport Fork was designed for the gentle transport of wrapped round bales. The opening area can be adjusted mechanically in 50 mm steps by means of a quick-release fastener.

• For diameters of 1.000 - 1.800 mm

• Three point linkage Cat. I and Cat. II

• Weight: 90 kg

• Generous dimensioned fork pipes / Ø 110 mm

• L x W x H / 1.350 x 110 x 970 mm

Dimensioning in mm


1.150

1.250

850


BTGHARound Bale Transport Fork with positioner

The round bale transport fork was designed for transporting and especially for tipping wrapped round bales. This allows a gentle bale transport and a gentle store on its face side.

• Single acting hydraulic control device required

• For diameters of 1.000 - 1.800 cm


• Generous dimensioned fork pipes / Ø110 mm

• Max. operating pressure: 200 bar / weight: 125 kg

• L x W x H / 1.350 x 1.100 x 970 mm

Additional Equipment: Hydraulic Width Adjustment

Because of two hydraulic cylinders the open-ing area is continuously variable. A double acting hydraulic control device is required.

The tilting tubes are unlocked by two hydraulic cylinders.

Mechanical width adjustment in 50 mm steps

Dimensioning in mm



680

2.150

1.150

BTGQUSquare Bale Grab

Especially designed to transport and stack square bales. Of course the BTGQU can also be used for transporting round bales. The special design of the generous dimensioned and rounded gripper arms ensures that the bale is clamped gently and without any damage.



• Euro-capture frame

• Low-maintenance gripper arm guidance


• Weight: 310 kg

• L x W x H / 1.600 x 2.240 x 680 mm


Dimensioning in mm

Take up of double bales Easy loading of trailers

Operation in stationary use Operation with round bales

Clamping area manually adjustable by 240 mm Mounting option: Claas Scorpion

Mounting Options:• JCB Q-FIT, Volvo BM, Hydrema, Claas Skorpion, Manitou• Kramer/Schäffer hydraulic• Merlo, MX• Adaptor Weiste triangle• Others on request

Function Description:

Because of the big opening area square bales up to 2.100 mm and round bales of up to 2.000 mm can be transported and stacked. The smallest opening area is 700 mm which allows to also clamp smaller bales without any difficulty.

The inclined arranged gripper arms ensure a safe grip and prevent an overexpansion or damage of the film.


Davidschlag 11 / 4202 Kirchschlag / AustriaTel: +43 (0)7215 2131-0 / Fax: +43 (0)7215 2131-9 [email protected] / www.goeweil.com

GÖWEIL Maschinenbau GmbHItem no. 86 00 191 / English

Bale Transport Devices - Catalogs

Documents