Balancing machine for one-piece and multi-piece automotive propel- ler shafts for use in large-volume production. Highly automated, patented unba- lance correction procedure ensures minimum cycle times and resetting times Isotropic bearing pedestals simulate actual conditions of operation Balancing machine for propeller shafts with fully automatic unbalance correction by welding Type RBRQ RF 2426-1 e
4
Embed
Balancing machine for propeller shafts with fully ... · minimum cycle times and resetting ... actual conditions of operation Balancing machine for propeller shafts with fully ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Balancing machine for one-piece
and multi-piece automotive propel-
ler shafts for use in large-volume
production.
Highly automated, patented unba-
lance correction procedure ensures
minimum cycle times and resetting
times
Isotropic bearing pedestals simulate
actual conditions of operation
Balancing machine for propeller shafts with fullyautomatic unbalance correction by welding
Type RBRQ
RF 2426-1 e
Modular machine structure withservo motor on the machine base.Easy and accurate positioning ofmeasuring pedestal through axiallinear guide bearings. All bearingpedestals equipped with positiondetection to check correct setting.Safety brackets with prism-shapedpart rest fixture. Gantry-mountedwelding gun with multiple electro-des for max. 4 correction planesand 2 correction steps in eachplane. Servo motors for preciseaxial and radial positioning.
Propeller shaft balancing machine type RBRQ
Special features
Structure
Bearing pedestal with isotropicspring system and high-accuracybalancing spindle. Asymmetricallyarranged spindle axis for easier loa-ding and unloading of the propellershafts.
PC-based unbalance measuringunit with extensive operatorprompting, status output, fault dia-gnosis etc. Remote diagnostics ispossible. Simple operation with sel-ection of functions on a touch scre-en. As part of the standard outfit,measuring instrumentation andcontrol system are set up for fourcorrection planes.
Patented single-station welding gunwith quadruple electrode in mid-frequency technology. Unbalancecorrection in four correction planesis provided as a standard feature.