E. Hawle Armaturenwerke GmbH 4840 Vöcklabruck - Austria - Wagrainer Straße 13 Tel.: +43 (0) 7672 72576 0 - Fax: +43 (0) 7672 78464 - E-Mail: [email protected] - www.hawle.com DN DN1 L H E E1 H1 80 80 16 215 330 105 105 115 15,70 100 80 260 330 120 105 115 16,20 DN DN1 L H H1 E 80 80 16 215 260 115 105 17,00 100 80 260 285 115 105 18,80 100 100 260 305 125 120 19,60 DN L 80 1" 16 185 4,70 100 205 5,60 125 195 6,80 150 195 8,60 200 205 13,00 DN L E 80 1" 16 140 105 5,50 100 1" 145 120 6,20 1½" 125 1" 145 125 7,90 150 1" 150 125 9,40 1½" 200 1" 165 145 14,75 1½" G 6/3 H DN1 E L DN H1 E1 DN1 H L E DN H1 L E DN L DN Design features Design features Design features Design features • BAIO socket / BAIO socket • Available on request with two or three lateral threads IT 1½" - or ZAK 46 outlets • BAIO socket / thread connector • BAIO spigot with 2 thread connectors 1" • Thread connections 1½" and 2" on request • Flange / BAIO socket • Flange size drilled according to EN 1092-2 | PN 10 • Available on request with two or three lateral threads IT 1½" - or ZAK 46 outlets No. NL60 No. NL47 No. NL48 No. NL65 BAIO MMN-duck foot bend BAIO socket end cap BAIO spigot end cap BAIO EN-duck foot bend Thread MOP (PN) Weight All illustrations, technical data, dimensions (in mm) and weights (all weights specified in kg) are non-binding. Subject to change. Edition 12.2017 Without gaskets BAIO - FITTINGS MOP (PN) Weight MOP (PN) Weight Thread MOP (PN) Weight