Emergency Driver for LED Lamps TYPICAL USE PRICE 03-LEDEM-BP /DM-20-E Our dependable emergency driver provides regulated power to LED lamps during a power outage. Designed to operate in NORMALLY–ON, NORMALLY–OFF or SWITCHED LOAD. Our emergency driver has versatile mounting options: inside, on-top or remote mount. Includes a push to test indicator standard. Get peace of mind. $ 99. 00 Constant Power Emergency Drivers for LED Luminaires TYPICAL USE PRICE 03-LEDEM-CP- (800 -1200 - 1600 - 2000 -2400) Provides constant power output to the load during emergency mode operation. Designed to be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHEDLOAD. Suitable for installation inside, on-top, or in remote mount of the LED Strip's and other Fixtures. Electronic limiting with normal operation resuming upon removal of fault. OEM Factory-installed. $ 69. 00 $ 89. 00 $ 99. 00 $ 110. 00 $ 125. 00 Constant Current Emergency Drivers for LED Luminaires TYPICAL USE PRICE 03-LEDM-BP/CC 03-BAT-12V- Provides constant-current power output to the load during emergency mode operation. Used on Panels, Troffers, LED Strips, High Bays or LED Constant Power products. Designed to be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHEDLOAD. Suitable for installation inside, on-top, or in remote mount of the fixture. $ 65. 00 Emergency Power Systems Inverter TYPICAL USE PRICE 23-SPS 55/125 110/125 110/250 220/250 23-LPS-375 23-LPS-600 Mini-electrical inverter systems for powering up to 600W of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required. $ 488. 00 $ 512. 00 $ 638. 00 $ 760. 00 $ 999. 00 $ 1400. 00 Transformer cover box TYPICAL USE PRICE 03-SDTXEM-BOX • Attach transformer to cover box. • Make wiring connections. • Attach transformer cover box assembly to luminaire driver enclosure. $ 25. 00 Call Contractor Lighting & Supply Today! (877)-664-5483 • ContractorLighting.com EMERGENCY POWER & BACK-UP PRODUCTS End-User Pricing Below. For distributor Pricing, Call Tony! (877)-664-5483 x4258 Push-to-Test Indicator Included
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BEST LIGHTING PRODUCTS • 1213 ETNA PARKWAY, PATASKALA OH 43062 • 740-964-1198 • www.bestlighting.netSpecifications and dimensions subject to change without notice.
CandlepowerSummary
0 900 9,525 9,52510 9,346 9,39020 8,863 8,89430 8,010 8,02440 6,793 6,73150 5,210 5,03860 3,477 3,26570 1,890 1,77380 664 65690 0 0
Zonal LumenSummaryZone Lumens % Fixture0 10 903 3.6%0 20 3,495 14.0%0 30 7,430 29.8%0 40 12,123 48.6%0 50 16,791 67.4%0 60 20,657 82.9%0 70 23,271 93.4%0 80 24,599 98.7%0 90 24,920 100.0%90 180 0 0.0%
0 180 24,920 100.0%
ELECTRICAL DATA
PHOTOMETRIC DATA
0 90
Maximum Candela = 9,525
Cone of Light
10’
20’
30’
40’
92 FC
23 FC
11 FC
6 FC.0
Nadir
75’
0’
25’
50’
75’75’50’25’0’75’ 50’ 25’
25’
50’
300
60
90
2010
50
40
7080
9,525
7,144
4,763
2,381
LEDFHB178 178 Watt Full-Body LED High Bay
Input Current (A)277V
Model Luminaire Lumens
Luminaire Watts
Lumens/ Watt 120V 240V
Input Voltage2CRI 1 Power
Factor THD 3 L70Hours4
ColorTemp.
1 Color rendering index.2 All 50-60Hz.3 Total harmonic distortion.4 L70 refers to the number of hours at which lumen output declines to 70% of the initial level. L70 hours are IES TM-21-11 calculated hours.
>90%
>90%
<20%
<20%
122,000
122,000
120-277
120-277
1.48
1.48
0.74
0.74
0.64
0.64
4000k
5000k
>80
>80
24,564
24,920
178
178
138
140
LEDFHB178-4K-MVDIM
LEDFHB178-5K-MVDIM
LEDFHB178-5K-MVDIM (24,920 Lumens)
Foot Candles5.02.01.00.50.20.1
Notes:▪ Isofootcandle plots depict initial footcandles at grade.▪ Gridlines represent units of mounting height of 25 feet.
Transformer Cover Box:▪ Attach transformer to cover box.▪ Make wiring connections.▪ Attach transformer cover box assembly to luminaire
driver enclosure.
Emergency Driver for LED Lamps TYPICAL USE PRICE
03-LEDEM-BP /DM-20-E
Our dependable emergency driver provides regulated power to LED lamps during a power outage. Designed to operate in NORMALLY–ON, NORMALLY–OFF or SWITCHED LOAD. Our emergency driver has versatile mounting options: inside, on-top or remote mount. Includes a push to test indicator standard. Get peace of mind.
$99.00
Constant Power Emergency Drivers for LED Luminaires
TYPICAL USE PRICE
03-LEDEM-CP- (800 -1200 - 1600 - 2000 -2400)
Provides constant power output to the load during emergency mode operation. Designed to be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHEDLOAD. Suitable for installation inside, on-top, or in remote mount of the LED Strip's and other Fixtures. Electronic limiting with normal operation resuming upon removal of fault. OEM Factory-installed.
$69.00
$89.00
$99.00
$110.00
$125.00
Constant Current Emergency Drivers for LED Luminaires
TYPICAL USE PRICE
03-LEDM-BP/CC03-BAT-12V-
Provides constant-current power output to the load during emergency mode operation. Used on Panels, Troffers, LED Strips, High Bays or LED Constant Power products. Designed to be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHEDLOAD. Suitable for installation inside, on-top, or in remote mount of the fixture.
$65.00
Emergency Power Systems Inverter TYPICAL USE PRICE
23-SPS55/125
110/125
110/250
220/250
23-LPS-375
23-LPS-600
Mini-electrical inverter systems for powering up to 600W of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required.
$488.00
$512.00
$638.00
$760.00
$999.00
$1400.00
Transformer cover box TYPICAL USE PRICE
03-SDTXEM-BOX• Attach transformer to cover box.• Make wiring connections.• Attach transformer cover box assembly
to luminaire driver enclosure.
$25.00
Call Contractor Lighting & Supply Today! (877)-664-5483 • ContractorLighting.com
EMERGENCY POWER & BACK-UP PRODUCTS
End-User Pricing Below. For distributor Pricing, Call Tony! (877)-664-5483 x4258
BLEDEM-BP/DM-20
ILLUMINATION•
Provides 1�0������������������������������to
the load�during emergency mode operation.
•For use with switched or unswitched fi xtures.
•Can be used with LED lamp loads of up to 20W����
�������������������������.
ELECTRICAL•
Universal 120-277V, 50�60 Hz input.
•Charge/Power "ON" LED indicator light and push-to-test switch for
mandated code compliance testing.
•Long-life, maintenance free, rechargeable NiCad battery.
•Output short/overcurrent protection: Electronic limiting, with normal
operation resuming upon removal of fault.
•90 Minute minimum emergency operating time over full
temperature range.
•24 Hour maximum battery recharge time.
HOUSING •Durable painted steel construction in red fi nish.
•Provided with ���fl������������ MOUNTING
WARRANTY/LISTING
•UL������ for factory ���������installation.
•Suitable for damp locations (0°C - 5�°C).
•5 year warranty on all electronics and housing.
•Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes.DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL
OUTPUT VOLTAGE (VDC)OUTPUT POWER (W)
BLEDEM-BP/DM-20
1�0����
20 (max.)
Emergency Driver for LED Lamps
(with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(withinternaldriver)
•Suitable for installation on top or in remote of the fixture.
•Can be used in both switched and unswitched fixtures.
16¼”5⅝”
1¾”
LED Test switch included.
PROJECT
TYPE
CATALOG #
Contractor Lighting & Supply • (877)-664-5483 • www.contractorlighting.com
FEATURESProvides 180-320VDC (or 120-230VAC) constant output to the load during emergency mode operation. For use with switched or unswitched fi xtures. Can be used with LED lamp loads of up to 20W.
ELECTRICAL• Universal 120-277V, 50/60 Hz input• Charge/Power “ON” LED indicator light and push-to-test
switch for mandated code compliance testing• Long-life, maintenance free, rechargeable NiCad battery• Output short/overcurrent protection: Electronic limiting,
with normal operation resuming upon removal of fault• 90 Minute minimum emergency operating time over full
temperature range• 24 Hour maximum battery recharge time• LED illuminated and remote mounted test switch• Durable painted steel construction in red/orange finish• Provided with 18” fl ex conduits on both ends• Suitable for installation inside or top of the fixture• UL Recognized for factory installation• Suitable for damp locations (0°C - 55°C)• 5-Year Warranty on all electronics and housing.• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes
BLEDEM-BP/DM-20
ILLUMINATION• Provides 1�0������������������������������ to
the load�during emergency mode operation.
• For use with switched or unswitched fi xtures.
• Can be used with LED lamp loads of up to 20W�����������������������������.
ELECTRICAL• Universal 120-277V, 50�60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch formandated code compliance testing.
• Long-life, maintenance free, rechargeable NiCad battery.
• Output short/overcurrent protection: Electronic limiting, with normaloperation resuming upon removal of fault.
• 90 Minute minimum emergency operating time over fulltemperature range.
• 24 Hour maximum battery recharge time.
HOUSING • Durable painted steel construction in red fi nish.
• Provided with ���fl������������
MOUNTING
WARRANTY/LISTING• UL ������ for factory ���������installation.
• Suitable for damp locations (0°C - 5�°C).
• 5 year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,Local and State codes.
DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W)
BLEDEM-BP/DM-20 1�0���� 20 (max.)
Emergency Driver for LED Lamps (with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(with internal driver)
• Suitable for installation on top or in remote of the fixture.
• Can be used in both switched and unswitched fixtures.
16¼”
5⅝”
1¾”
LED Test switch included.
BLEDEM-BP/DM-20
ILLUMINATION• Provides 1�0������������������������������ to
the load�during emergency mode operation.
• For use with switched or unswitched fi xtures.
• Can be used with LED lamp loads of up to 20W�����������������������������.
ELECTRICAL• Universal 120-277V, 50�60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch formandated code compliance testing.
• Long-life, maintenance free, rechargeable NiCad battery.
• Output short/overcurrent protection: Electronic limiting, with normaloperation resuming upon removal of fault.
• 90 Minute minimum emergency operating time over fulltemperature range.
• 24 Hour maximum battery recharge time.
HOUSING • Durable painted steel construction in red fi nish.
• Provided with ���fl������������
MOUNTING
WARRANTY/LISTING• UL ������ for factory ���������installation.
• Suitable for damp locations (0°C - 5�°C).
• 5 year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,Local and State codes.
DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W)
BLEDEM-BP/DM-20 1�0���� 20 (max.)
Emergency Driver for LED Lamps (with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(with internal driver)
• Suitable for installation on top or in remote of the fixture.
• Can be used in both switched and unswitched fixtures.
16¼”
5⅝”
1¾”
LED Test switch included.
BLEDEM-BP/DM-20
ILLUMINATION• Provides 1�0������������������������������ to
the load�during emergency mode operation.
• For use with switched or unswitched fi xtures.
• Can be used with LED lamp loads of up to 20W�����������������������������.
ELECTRICAL• Universal 120-277V, 50�60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch formandated code compliance testing.
• Long-life, maintenance free, rechargeable NiCad battery.
• Output short/overcurrent protection: Electronic limiting, with normaloperation resuming upon removal of fault.
• 90 Minute minimum emergency operating time over fulltemperature range.
• 24 Hour maximum battery recharge time.
HOUSING • Durable painted steel construction in red fi nish.
• Provided with ���fl������������
MOUNTING
WARRANTY/LISTING• UL ������ for factory ���������installation.
• Suitable for damp locations (0°C - 5�°C).
• 5 year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,Local and State codes.
DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W)
BLEDEM-BP/DM-20 1�0���� 20 (max.)
Emergency Driver for LED Lamps (with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(with internal driver)
• Suitable for installation on top or in remote of the fixture.
• Can be used in both switched and unswitched fixtures.
16¼”
5⅝”
1¾”
LED Test switch included.
03-BLEDM-BP/DM20-EEMERGENCY DRIVER FOR LED LAMPS
2.5-4kVSURGE
PROTECTION
1.5kVSURGE
PROTECTION
2kVSURGE
PROTECTION
6kVSURGE
PROTECTION
4kVSURGE
PROTECTION
IP65
Lorem ipsum
2.5-4kVSURGE
PROTECTION
1.5kVSURGE
PROTECTION
2kVSURGE
PROTECTION
6kVSURGE
PROTECTION
4kVSURGE
PROTECTION
IP65
Lorem ipsum
S
DIMENSIONS
MODEL DESCRIPTION INPUT VOLTAGE INPUT WATTS OUTPUT WATTS
03-BLEDM-BP/DM20-E Emergency Driver 180-320 VAC 36 20
101218
BLEDEM-BP/DM-20
ILLUMINATION•
Provides 1�0������������������������������to
the load�during emergency mode operation.
•For use with switched or unswitched fi xtures.
•Can be used with LED lamp loads of up to 20W����
�������������������������.
ELECTRICAL•
Universal 120-277V, 50�60 Hz input.
•Charge/Power "ON" LED indicator light and push-to-test switch for
mandated code compliance testing.
•Long-life, maintenance free, rechargeable NiCad battery.
•Output short/overcurrent protection: Electronic limiting, with normal
operation resuming upon removal of fault.
•90 Minute minimum emergency operating time over full
temperature range.
•24 Hour maximum battery recharge time.
HOUSING •Durable painted steel construction in red fi nish.
•Provided with ���fl������������ MOUNTING
WARRANTY/LISTING
•UL������ for factory ���������installation.
•Suitable for damp locations (0°C - 5�°C).
•5 year warranty on all electronics and housing.
•Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes.DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL
OUTPUT VOLTAGE (VDC)OUTPUT POWER (W)
BLEDEM-BP/DM-20
1�0����
20 (max.)
Emergency Driver for LED Lamps
(with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(withinternaldriver)
•Suitable for installation on top or in remote of the fixture.
•Can be used in both switched and unswitched fixtures.
16¼”5⅝”
1¾”
LED Test switch included.
PROJECT
TYPE
CATALOG #
Contractor Lighting & Supply • (877)-664-5483 • www.contractorlighting.com
FEATURESProvides 180-320VDC (or 120-230VAC) constant output to the load during emergency mode operation. For use with switched or unswitched fi xtures. Can be used with LED lamp loads of up to 20W.
ELECTRICAL• Universal 120-277V, 50/60 Hz input• Charge/Power “ON” LED indicator light and push-to-test
switch for mandated code compliance testing• Long-life, maintenance free, rechargeable NiCad battery• Output short/overcurrent protection: Electronic limiting,
with normal operation resuming upon removal of fault• 90 Minute minimum emergency operating time over full
temperature range• 24 Hour maximum battery recharge time• LED illuminated and remote mounted test switch• Durable painted steel construction in red/orange finish• Provided with 18” fl ex conduits on both ends• Suitable for installation inside or top of the fixture• UL Recognized for factory installation• Suitable for damp locations (0°C - 55°C)• 5-Year Warranty on all electronics and housing.• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes
BLEDEM-BP/DM-20
ILLUMINATION• Provides 1�0������������������������������ to
the load�during emergency mode operation.
• For use with switched or unswitched fi xtures.
• Can be used with LED lamp loads of up to 20W�����������������������������.
ELECTRICAL• Universal 120-277V, 50�60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch formandated code compliance testing.
• Long-life, maintenance free, rechargeable NiCad battery.
• Output short/overcurrent protection: Electronic limiting, with normaloperation resuming upon removal of fault.
• 90 Minute minimum emergency operating time over fulltemperature range.
• 24 Hour maximum battery recharge time.
HOUSING • Durable painted steel construction in red fi nish.
• Provided with ���fl������������
MOUNTING
WARRANTY/LISTING• UL ������ for factory ���������installation.
• Suitable for damp locations (0°C - 5�°C).
• 5 year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,Local and State codes.
DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W)
BLEDEM-BP/DM-20 1�0���� 20 (max.)
Emergency Driver for LED Lamps (with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(with internal driver)
• Suitable for installation on top or in remote of the fixture.
• Can be used in both switched and unswitched fixtures.
16¼”
5⅝”
1¾”
LED Test switch included.
BLEDEM-BP/DM-20
ILLUMINATION• Provides 1�0������������������������������ to
the load�during emergency mode operation.
• For use with switched or unswitched fi xtures.
• Can be used with LED lamp loads of up to 20W�����������������������������.
ELECTRICAL• Universal 120-277V, 50�60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch formandated code compliance testing.
• Long-life, maintenance free, rechargeable NiCad battery.
• Output short/overcurrent protection: Electronic limiting, with normaloperation resuming upon removal of fault.
• 90 Minute minimum emergency operating time over fulltemperature range.
• 24 Hour maximum battery recharge time.
HOUSING • Durable painted steel construction in red fi nish.
• Provided with ���fl������������
MOUNTING
WARRANTY/LISTING• UL ������ for factory ���������installation.
• Suitable for damp locations (0°C - 5�°C).
• 5 year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,Local and State codes.
DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W)
BLEDEM-BP/DM-20 1�0���� 20 (max.)
Emergency Driver for LED Lamps (with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(with internal driver)
• Suitable for installation on top or in remote of the fixture.
• Can be used in both switched and unswitched fixtures.
16¼”
5⅝”
1¾”
LED Test switch included.
BLEDEM-BP/DM-20
ILLUMINATION• Provides 1�0������������������������������ to
the load�during emergency mode operation.
• For use with switched or unswitched fi xtures.
• Can be used with LED lamp loads of up to 20W�����������������������������.
ELECTRICAL• Universal 120-277V, 50�60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch formandated code compliance testing.
• Long-life, maintenance free, rechargeable NiCad battery.
• Output short/overcurrent protection: Electronic limiting, with normaloperation resuming upon removal of fault.
• 90 Minute minimum emergency operating time over fulltemperature range.
• 24 Hour maximum battery recharge time.
HOUSING • Durable painted steel construction in red fi nish.
• Provided with ���fl������������
MOUNTING
WARRANTY/LISTING• UL ������ for factory ���������installation.
• Suitable for damp locations (0°C - 5�°C).
• 5 year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,Local and State codes.
DIMENSIONS
WIRING DIAGRAM
ORDERING INFORMATION
STANDARD
MODEL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W)
BLEDEM-BP/DM-20 1�0���� 20 (max.)
Emergency Driver for LED Lamps (with internal driver)
WWWWARARARARRRARARANNTY/LISTING
(with internal driver)
• Suitable for installation on top or in remote of the fixture.
• Can be used in both switched and unswitched fixtures.
16¼”
5⅝”
1¾”
LED Test switch included.
03-BLEDM-BP/DM20-EEMERGENCY DRIVER FOR LED LAMPS
2.5-4kVSURGE
PROTECTION
1.5kVSURGE
PROTECTION
2kVSURGE
PROTECTION
6kVSURGE
PROTECTION
4kVSURGE
PROTECTION
IP65
Lorem ipsum
2.5-4kVSURGE
PROTECTION
1.5kVSURGE
PROTECTION
2kVSURGE
PROTECTION
6kVSURGE
PROTECTION
4kVSURGE
PROTECTION
IP65
Lorem ipsum
S
DIMENSIONS
MODEL DESCRIPTION INPUT VOLTAGE INPUT WATTS OUTPUT WATTS
03-BLEDM-BP/DM20-E Emergency Driver 180-320 VAC 36 20
101218
Push-to-Test Indicator Included
Related Documents
