BAC CORROSION CONTROL LIMITED STAFFORD PARK 11 · TELFORD · SHROPSHIRE · TF3 3AY · UNITED KINGDOM PHONE: +44 (0) 1952 290 321 · FAX: +44 (0) 1952 290 325 · EMAIL: [email protected]· WEBSITE: www.bacgroup.com EMAIL: [email protected]· WEBSITE: www.rcslgroup.com REGISTRATION No. 1394643 ENGLAND · REGISTERED OFFICE AS ABOVE PREQUALIFICATION DOCUMENT 4 19/09/2018 L Grihault A Arnold S Goring IFC 3 13/06/2017 L Grihault A Arnold S Goring IFC 2 24/09/2015 L Grihault A Arnold S Goring IFC 1 24/06/2015 L Grihault A Arnold S Goring IFC Rev. Date Prepared By Checked By Approved By Status Remark Title: PREQUALIFICATION DOCUMENT QAP 005/5(T) BAC Ref: CR Client P.O. Prepared for Client: Prepared By: BAC Corrosion Control Limited (incorporating RCSL) Stafford Park 11 Telford TF3 3AY Tel: 01952 290321 Fax: 01952 290325 Email: [email protected]
50
Embed
BAC Corrosion Control Ltd Document... · 2018. 10. 9. · BAC CORROSION CONTROL LIMITED STAFFORD PARK 11 · TELFORD · SHROPSHIRE · TF3 3AY · UNITED KINGDOM PHONE: +44 (0) 1952
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BAC CORROSION CONTROL LIMITED STAFFORD PARK 11 · TELFORD · SHROPSHIRE · TF3 3AY · UNITED KINGDOM
REGISTRATION No. 1394643 ENGLAND · REGISTERED OFFICE AS ABOVE
PREQUALIFICATION DOCUMENT
4 19/09/2018 L Grihault A Arnold S Goring IFC 3 13/06/2017 L Grihault A Arnold S Goring IFC 2 24/09/2015 L Grihault A Arnold S Goring IFC 1 24/06/2015 L Grihault A Arnold S Goring IFC
Rev. Date Prepared By Checked By Approved By Status Remark Title: PREQUALIFICATION DOCUMENT QAP 005/5(T) BAC Ref: CR Client P.O. Prepared for Client: Prepared By:
Table of Contents 1. INTRODUCTION ............................................................................................................................................. 3
1.1 Company Registration Certificate ........................................................................................................... 4
2. COMPANY STRUCTURE AND ORGANISATION ......................................................................................... 5
2.1 Company Structure ................................................................................................................................. 5
2.3 Registered Office UK .............................................................................................................................. 6
2.5 Parent Company ..................................................................................................................................... 7
2.6 Distributors & Agents for BAC ................................................................................................................. 8
2.7 Distributors & Agents for RCSL............................................................................................................. 10
2.8 BAC Distributes for ................................................................................................................................ 11
3.8 Information Technology ......................................................................................................................... 13
3.9 Legal, Financial and Accounting ........................................................................................................... 13
3.12 Health and Safety .................................................................................................................................. 17
5. COMPANY CAPABILITY .............................................................................................................................. 33
1. INTRODUCTION BAC Corrosion Control Limited (BAC) has a history dating back to 1954 and is an amalgamation of several well-respected names from the cathodic protection and electrical bonding fields. BAC’s roots lie within the following companies: - Bergsøe Anti Corrosion, MAPEL, Global Cathodic Protection and Bright-Bond. A more complete and detailed history of the company is available on the company Website:at www.bacgroup.com. Many of our major clients are expanding their operations in different regions of the world. BAC has recognised the importance of being able to offer clients truly international products and services, BAC now has representation in 20 countries worldwide including a branch in Dubai, UAE. These representatives are backed up by our Engineering, Standard Products, Electrical Engineering and Manufacturing Departments. Rose Corrosion Services (RSCL) a trading division of BAC Corrosion Control Limited, based in Telford, UK, is a world class company specialising in chemical injection and corrosion monitoring and inhibition. Working in the oil, gas and refining industries, RCSL has over 20 years of successful experience both in the UK and worldwide and is certified to ISO 9001:2008. The origins of RCSL can be traced back to 1976 and its evolution until today has been an amalgamation of several well-respected names from the industry. A more complete and detailed history of the company is available on the company Website:at www.rcslgroup.com. RCSL corrosion monitoring and chemical Injection systems are now sold throughout the world via a chain of distributors and agents. RCSL products are compatible and interchangeable with similar equipment manufactured by others. BAC Corrosion Control Limited (BAC) bought Rose Corrosion Services Limited (RCSL) in January 2011. RCSL is 100% owned by BAC and many of the procedures and policies for BAC also encompass RCSL activities. For the purposes of vendor registration and prequalification, we wish to register BAC primarily, but also RCSL as a wholly owned subsidiary of BAC.
2.5 Parent Company BAC is a fully owned subsidiary of Midroc Europe AB. The Midroc groups operate in the Scandinavian and international contracting markets, primarily in the civil construction, industrial and environmental contracting sectors: Midroc Europe AB Box 3002, S-169 03 Solna Sweden Telephone: +46 10 470 70 00 Fax: +46 8 733 18 16 Email: [email protected] Website: www.midroc.se
BRUNEI Corrtrol Synergy SDN. BHD. No.14, Jalan BP 6/6, Bandar Bukit Puchong, 47120 Puchong, Selangor D.E. Malaysia Telephone: +603-8068 2616 Fax: +603-80603816 Email: [email protected] and/or [email protected] Website: www.corrtrolgroup.com
IRAQ Basra Corrosion Engineering Services Co Ltd Manawi Pasha, Al Isteqlal Blvd, In Front of Basra Chamber of Commerce, Basra, Iraq Telephone: +96 47 7122 88735 Fax: +96 47 7122 88735 Email: [email protected] KUWAIT HOV General Trading & Contracting Co. WLL P.O. Box: 36892, 24758 Al-Rass, Kuwait Tel: +965 2398 7612 / 3 Fax: +965 2398 7618 Email: [email protected]
MALAYSIA Rose Corrosion Services (Malaysia) Sdn Bhd, 21400 Jalan Welfare, 47000 Sg Buloh, Selangor Telephone: +603 6148 3902 Fax: +603 6148 3903 Email: [email protected]
OMAN AMRAN CP Systems and Service L.L.C. Plot No.103/3, Road No.4, Rusayl Industrial Estate Muscat, Sultanate of Oman. Tel.: +968 24443013 Fax: +968 24443023 Email: [email protected]>
PAKISTAN Enable International Muzaffar Ahmad Khan, House no. 104- A, Street no. 91, Sector G 11/3, Islamabad Telephone: +92 51 222 1750 Fax: +92 51 222 1695 Email: [email protected]
UAE Mazoun Technical Oilfield Services Co. L.L.C P.O. Box -72510 Abu Dhabi, United Arab Emirates Tel: 00971 2 626 22 37 Fax: 00971 2 626 22 39 E-mail: [email protected]
2.8 BAC Distributes for AVO RANGE BAC Corrosion Control are distributors for the AVO range of AVO, Biddle, Megger and Multi-amp electrical testing equipment. www.avointl.com/
GALVOTEC ALLOYS BAC Corrosion Control Ltd is the European distributor for SuperMAG™ high potential magnesium anodes. www.galvotec.com
MC MILLER BAC Corrosion Control are distributors for the MC Miller range of instruments and software for the corrosion and cathodic protection industry - built to take it. http://www.mcmiller.com/
TINKER & RASOR BAC Corrosion Control Ltd are distributors for the Tinker and Rasor range of holiday detectors, pipe and cable locators, cathodic protection test stations and other corrosion related instruments. http://www.tinker-rasor.com/
BAC consists of an experienced engineering team as well as an extensive assembly and stores facilities in Telford, Shropshire, U.K. This combination allows BAC to provide the highest standard of technical engineering and product supply directly to our clients. With our facilities and personnel, we offer complete design, supply and installation of cathodic protection and corrosion monitoring systems tailored to individual client’s needs.
3.2 External Consultants
BAC Corrosion Control employs expert external consultants when additional specific expertise is required. Typically these consultants are Corrosion Specialists who work with BAC to ensure we provide our clients with the highest quality of service.
3.3 Sales & Marketing Manager
The sales and marketing manager is responsible for all aspects of sales within the RCSL, projects, manpower services and sales departments. The role also entails the appointment and support of our network of agents and distributors and development of our product and service range.
3.4 Manager of Engineering
The Engineering Manager is responsible for the cathodic protection project and manpower services departments of the company. Their knowledge and experience of CP design, installation, commissioning and testing is critical to the operation and allows proper guidance and development of all the engineering staff employed by BAC.
3.5 Project Engineers Engineers with qualifications suited to and in accordance with the client’s needs are appointed
to a project. Should a contract be large enough, certain Engineers are appointed Senior Project Engineers and become responsible for a division of the project. All engineers are members of the Institute of Corrosion and/or NACE. BAC is a corporate member of both NACE and ICORR.
3.6 Product Development Manager
The Product Development Manager is in charge of all new product design and testing as well as technical support for existing equipment. Their brief is to develop robust and innovative products that deliver meaningful value propositions to the customer. These products span the full range of our activities from Cathodic Protection to Pin Brazing to Electrical Engineering.
Page 13 of 50
3.7 Manufacturing Manager
The manufacturing manager is responsible for the safe and efficient operation of the manufacturing facility ensuring on time delivery and compliance with in house and where applicable, external QA/QC procedures for each product/project. Manufacturing and testing for the EasyBond and Bright-Bond range of pin brazing equipment is also carried out at our Telford, UK works
3.8 Information Technology A Microsoft Small Business Server cloud based and Windows 7/10 professional operating
system between all facilities provides for common information and easy communication through e-mail and remote server access.
3.9 Legal, Financial and Accounting Fully qualified staff and utilising fully integrated accounting software ensures that all financial
and accounting procedures are carried out in accordance with the client’s own departments.
3.10 Insurance This is to certify that we BAC Corrosion Control Limited hold the following insurance:-
Employers Liability AVIVA plc Policy Number 100540616CC1 Policy Holder BAC Corrosion Control Limited UK Insured BAC Corrosion Control Limited UK Renewal date 31st December annually Minimum Amount of cover GBP 5,000.000
General Liability & Products Liability Moderna Försäkringar Policy Number 754882 Policy Holder Midroc Europe AB (556622-8838) Insured BAC Corrosion Control Limited UK Renewal Date 1st January annually Limit of Indemnity GBP 5,000,000 per occurrence and GBP 10,000,000 in annual
aggregate Territorial limits Worldwide
Page 14 of 50
Professional Indemnity (Technical Consultants) Moderna Försäkringar Policy Number 754882 Policy Holder Midroc Europe AB (556622-8838) Insured BAC Corrosion Control Limited UK Renewal Date 1st January annually Limit of Indemnity GBP 1,700,000 per claim and in annual aggregate Territorial limits Worldwide
Marine Insurance Tokio Marine Kiln Ltd Policy Holder BAC Corrosion Control Limited UK Insured BAC Corrosion Control Limited UK Renewal date 31st December annually Claim limit per occurrence GBP 1,000,000
3.11 Quality All projects, manufacturing and products supply are carried out strictly in accordance with the
Integrated Management system which complies with ISO 9001:2008 accredited by BM Trada. The scope of certification is:
• Design, manufacture, supply and installation of Cathodic Protection systems and components, power control systems and Pin Brazing equipment. Provision of Cathodic Protection and Pin Brazing services. Product stockholder, specialist distributor and supplier of Cathodic Protection and Pin Brazing equipment.
• Design, Development, Manufacture and Supply of Corrosion Monitoring, Chemical
Injection and Material Testing Systems for the use in the Oil, Gas, Petrochemical, Water Utility and Civil Engineering Industries.
BAC manufacture oil cooled transformer rectifiers which are certified for zone 1 hazardous areas with ATEX Directive 94/9/EC approval.
BAC has an internal auditor/co-ordinator to keep the quality assurance fully up to date.
Quality Policy
BAC Corrosion Control Limited (including RCSL) specialises in the following activities:- • Design, manufacture, supply and installation of cathodic protection systems and
components, power control systems and Pin Brazing equipment. • Provision of cathodic protection and Pin Brazing services. • Product stockholder, specialist distributor and supplier of cathodic protection and Pin
Brazing equipment.
Page 15 of 50
• Design, Development, Manufacture and Supply of Corrosion Monitoring, Chemical Injection and Material Testing Systems for the use in the Oil, Gas, Petrochemical, Water Utility and Civil Engineering Industries.
In line with our mission statement, the company endeavours to satisfy or exceed customer expectations and is committed to a policy of quality management throughout its activities, ensuring that the service/product quality satisfies the specific contractual obligations of our customers together with the requirements specified in BS EN ISO 9001:2008, BS EN ISO/IEC 80079-34:2011 and any other relevant documents which augment this standard including the adherence to statutory and regulatory requirements. It is the policy of the company to supply products/services of a quality that will merit and earn customer satisfaction, thus enabling the company to retain our existing customers and to generate new customers through a policy of continual improvement of our systems and working practices. Systems are in place to assess the effectiveness of the quality system with regular meetings being held to review performance and the quality objectives with any additional quality objectives/measures being introduced as considered necessary by the management in line with the company’s business requirements. These reviews will also consider the continuing suitability of the Quality Policy. All personnel share responsibility for the quality of the products/services supplied to our customers and the company will provide reasonable access for our customer’s representatives to discharge their quality responsibilities. New and existing personnel are made aware of the company's quality policy either during ongoing training sessions or company induction. It will also be made available to all interested parties through the company website. The Managing Director has given the Management Representative full authority to carry out the quality policy of the company and all company personnel are required to cooperate with the Management Representative in carrying out this task. This policy shall be reviewed for its effectiveness and suitability at least annually as part of the management review process. The quality manual and the associated procedures are approved by the undersigned as the authoritative documents relating to quality management within the Company.
Page 16 of 50
BS EN ISO 9001:2015 Certificate
Page 17 of 50
3.12 Health and Safety
All BAC engineering and manufacturing staff have attended “Passport to Safety” courses, governed and overseen by either the Institute of Occupational Safety and Health (IOSH) or the Engineering Construction Industry Training Board (ECITB) and carry up to date certification. The Occupational Health and Safety Management System is certified to OHSAS 18001:2007 by BM Trada. The scope of certification is:
• Design, manufacture, supply and installation of Cathodic Protection systems and components, power control systems and Pin Brazing equipment. Provision of Cathodic Protection and Pin Brazing services. Product stockholder, specialist distributor and supplier of Cathodic Protection and Pin Brazing equipment.
• Design, Development, Manufacture and Supply of Corrosion Monitoring, Chemical
Injection and Material Testing Systems for the use in the Oil, Gas, Petrochemical, Water Utility and Civil Engineering Industries.
BAC employs external Consultants to manage and keep the health and safety requirements fully up to date.
Health and Safety Policy This statement is issued by the Managing Director of BAC Corrosion Control Limited (including RCSL), to comply with the statutory duty under Section 2(3) of the Health and Safety at Work Act, 1974, in meeting all obligations to employees and the public who may be affected by its activities. The systems in place are also in compliance with the requirements of BS OHSAS 18001:2007, furthermore the company is committed to a process of continual improvement of its management and performance. It is the aim of the Managing Director and the Board of Directors, (the company), so far as is reasonably practicable, to ensure that:
The working environment of all employees is safe and without risks to health and that adequate provision is made with regard to the facilities and arrangements for their welfare at work. In addition we are committed to the prevention of injury and ill health.
The provision and maintenance of plant and safe systems of work are safe and without risks to health.
Those persons who are not in our employment, who may be affected by our activities, are not exposed to risks to their health and safety.
Information, instruction, training and supervision is provided, as necessary, to secure the health and safety at work of all employees.
Arrangements for the use, handling, storage and transportation of articles and substances for use at work are safe and without risk to health.
Adequate information is available with respect to articles and substances used at work, detailing the conditions and precautions necessary, to ensure that they present no risks to health or safety.
There is suitable provision for the safe access and egress, to and from, all working areas.
Page 18 of 50
That the business is committed to comply with applicable legal and other requirements to which we subscribe.
Occupational health and safety objectives are set and reviewed through the management review process.
The Directors are responsible for this policy and afford safety matters equal if not greater priority to other management functions within the company. All company employees are reminded of their legal requirement to ensure that the company’s Health and Safety Policy is observed, with this being communicated to them through the induction process. In particular, they are required:
To take reasonable care for their own health and safety at work and the safety of others who may be affected by their actions, or by their neglect.
To co-operate with their employer to ensure that any duty, or requirement, for health and safety, imposed upon their employer by law, is performed, or complied with.
Not to intentionally, or recklessly, interfere with, or misuse, anything provided in the interests of health, safety, or welfare.
This policy is to be read in conjunction with the company’s site specific arrangements and safe systems of work. It will also be made available to all interested parties through the company website and is also reviewed annually to ensure it remains relevant.
Page 19 of 50
BS OHSAS 18001:2015 Certificate
Page 20 of 50
Work safety statistics Company: BAC Corrosion Control 2017 2016 2015 2014 2013 2012 2011 2010 2009 First aid cases 6 4 2 1 10 0 2 7 5 Near Misses 3 5 1 3 14 6 3 11 7 Environmental incidents 2 0 0 3 2 2 Lost time accidents 0 1 0 0 0 0 0 1 1 Restricted workday cases 0 0 0 0 0 0 0 0 0 Incidents 0 0 0 3 16 8 0 8 7 Total lost manhours 0 15 0 0 0 0 0 237 19.5 Total manhours worked 54597 48726 51955 50034 50156 50924.5 49494 49494 49819 Average number of employees 35 32 33 32 31 30 33 33 32
Frequency rate = No of lost time accidents X 1 000 000 Total manhours worked Accident rate = No of lost time accidents X 1 000 Average No of employees Compilation of absence due to illness for the annual report Company: BAC Corrosion Control 2017 2016 2015 2014 2013 2012 2011 2010 2009 Total regular working-hours, in hours 54597 48726 51955 51973 51246 51457 48668 49494 49819
Total absence due to illness, in hours 2214 645 1000 1212 90 532.5 757.5 1358 1843
Total absence due to illness, in percentage of total regular working-hours
Absence due to illness over 60 days, in percentage of total absence due to illness
46% 0% 0% 41% 0 0 1 0 97
Annual working-hours is calculated as number of ordinary working days during year minus number of holidays multiplied with normal number of working hours per day X number of employees. If there are many employees who have been employed only part of the year, annual working hours have to be corrected accordingly.
Frequency rate = No of lost time accidents X 1 000 000 Total manhours worked
Accident rate =
No of lost time accidents X 1 000
Average No of employees Compilation of absence due to illness for the annual report
Page 22 of 50
3.13 Environmental The Environmental Management System is certified to ISO 14001:2004 by BM Trada. The scope of certification is:
• Design, manufacture, supply and installation of Cathodic Protection systems and components, power control systems and Pin Brazing equipment. Provision of Cathodic Protection and Pin Brazing services. Product stockholder, specialist distributor and supplier of Cathodic Protection and Pin Brazing equipment.
• Design, Development, Manufacture and Supply of Corrosion Monitoring, Chemical Injection and Material Testing Systems for the use in the Oil, Gas, Petrochemical, Water Utility and Civil Engineering Industries.
BAC employs an external consultant to manage and keep the environmental requirements fully up to date.
Environmental Policy BAC Corrosion Control Limited (including RCSL) specialists in corrosion protection and corrosion monitoring services, recognises its responsibility to ensure that our business activities do the least possible damage to the environment. The management of the company is committed to a policy of Environmental Management throughout the company’s activities, in compliance with the requirement of BS EN ISO 14001:2004, ensuring that services are provided in such a way as to minimise the environmental effects of material usage and disposal. Furthermore the company is committed to a process of continual improvement of environmental performance. The company will ensure that these objectives are achieved by:
• Minimising the use of resources (materials, fuel and energy) there by reducing wastage. • Re-using or re-cycling of waste materials whenever possible, prior to disposal. • Minimising all emissions and discharges (noise, gaseous, solid and liquid) hereby
reducing our carbon footprint and ensuring compliance with all regulatory controls. • Considering the environmental effects and commitment to pollution prevention in all
business decisions including the purchase of materials or equipment and the adoption of new technology/processes.
• Encouraging all third parties involved with our business to adopt a policy of environmental management.
• Providing adequate resources for the achievement of the policy objectives. • Compliance with the environmental, legal and other requirements to which the company
prescribes. Employees at every level of the company are expected to take all reasonable steps to safeguard the environment, and any other persons who may be affected by their acts or omissions whilst at work. BAC Corrosion Control Limited (including RCSL) will ensure that this policy is communicated and available to all relevant interested parties through the company website. This policy shall be reviewed for its effectiveness and suitability at least annually as part of the management review process.
Page 23 of 50
BS EN ISO 14001:2015 Certificate
Page 24 of 50
3.14 Certification
Corrosion Prevention Association Certificate
Page 25 of 50
NACE Certificate of Corporate Membership
Page 26 of 50
Institute of Corrosion Certificate
Page 27 of 50
BSI Membership
Page 28 of 50
CHAS Certificate
Page 29 of 50
Shropshire Chamber Membership Certificate
Page 30 of 50
3.15 Achilles/UDVB Certification
Achilles Certificate of Assessment
Page 31 of 50
Achilles Certificate of Registration
3.16 Employee Resumes
BAC aims to provide clients with the highest quality of expertise and service; as such personnel are all highly qualified and trained.
Detailed resumes of the BAC staff can be provided if needed.
Page 32 of 50
4. FINANCIAL
4.1 Financial Reports
Annual abbreviated audited accounts can be requested if needed
4.2 Trade References 1) Premier Cables Ltd 2) Specialised Wiring Accessories Unit 11, Abbey Mills
Fax: 01582 665060 Fax: 01453 842224 Monthly Turnover approx. £10,000 Monthly Turnover approx. £7,500 4 years + 4 years +
Page 33 of 50
5. COMPANY CAPABILITY
5.1 Market Areas
BAC's Engineering and Material supply services have been successfully utilised across a wide range of industries and particularly in the following sectors:-
• Pipelines
High Pressure Oil & Gas Water, Main Feeder & Distribution Fuel Products District Heating & Steam
• Marine
Floating Dolphins/Pontoons Jetties, Piers and Offshore Structures High Speed Water Jet Powered Craft Pleasure Boats
• Power Stations
Screening Areas Intake Pumps and Outlet Pipe work Condenser Water Boxes
• Industrial
Bulk Storage Tanks and Fuel Supply facilities Gas Production - Treatment and Liquefaction Oil Production Facilities – Injection and Oil Well Casings Refineries & Petro-Chemical Complexes Pressure Vessels
• Steel in Concrete
Bridge Decks Car Parks Steel Framed Buildings
• Railways – (Bright Bond)
Intercity Railways City, Metro/tram systems and Underground Railways
Page 34 of 50
Size of Contract
The resources of BAC and the parent company Midroc combine to enable the largest projects to be undertaken, as well as small, highly specialised contracts. Full financial resources are documented in the Group's Annual Reports Accounts and Interim Statements.
5.2 Operational Divisions
Projects and Manpower Services BAC provides clients with a complete engineering and technical service, undertaking audits, surveys, technical specifications and designs corrosion prevention systems, as well as manufacturing, installation and supervision of equipment during fabrication and construction.
BAC provides any one, or all of the following services for all corrosion prevention/control systems:-
• Consultancy • Initial Feasibility and Surveys • Design • Specifications, Procedures, Method Statements and Drawings • Procurement and Supply • Installation and Installation Supervision • Commissioning and Maintenance • Training • Seminars
BAC Products BAC maintains a comprehensive manufacturing facility in its modern United Kingdom based
headquarters. A wide range of products are stocked and manufactured at this location. Catalogues and brochures of all product ranges are available upon request or directly from www.bacgroup.com .
BAC's product range is constantly updated in keeping with technical developments and customer requirements.
BAC's extensive Products Catalogue Index is listed below:
6.0 Steel in Concrete 6.1 Al-Zn-In Metal Spraying 6.2 LPR Ladder Probes 6.3 Retrofit LPR Probes 6.4 LPR Corrosion Rate Meter 6.5 Portable LPR Probe Set 6.6 Mapeshield I 6.7 Mapeshield E25 6.8 MMO Discrete Anodes 6.9 MMO Net Anode 6.10 MMO Mesh Ribbon Anode
RCSL Products BAC/RCSL maintains a comprehensive manufacturing facility in its modern United Kingdom
based headquarters. A wide range of products are stocked and manufactured at this location. Catalogues and brochures of all product ranges are available upon request or directly from www.rcslgroup.com .
RCSL's product range is constantly updated in keeping with technical developments and customer requirements.
RCSL's extensive Products Catalogue Index is listed below:
1.0 Corrosion Monitoring 1.1 Electrical Resistance Probes & Accessories 1.2 Linear Polarisation Resistance Probes & Accessories 1.3 MS Instrumentation 1.4 Weight Loss Coupons 1.5 Miscellaneous 1.6 Access Fittings 1.7 Chemical Injection
BAC’s head office in Telford has a fully up to date IT system with a full Windows based network, Email:system, Website:hosting (www.bacgroup.com) and running Microsoft Office 365 suite of programs. Our drawing office is currently running Solidworks 2013 and Autocad 2013.
BAC will continue to invest in infrastructure, manufacturing, distribution, customer service, new products and engineering services to meet the needs of the industries that we serve. The office space is in the region of 370.5m², layout below of premises including workshop and storage.
The workshop facilities house automatic machinery used in the manufacture and production process of some of the BAC product range. Power press machines and an integrated compressed air system contribute in producing all products to ISO 9001:2008 standards. In the future, it is hoped that the manufacturing premises will develop into an independent facility with the needed control to ensure on time deliveries. The workshop and despatch area is 533m2.
BAC facilities meet all necessary standards regarding Health & Safety, with a company accident book, accident recording and near miss recording procedure in place to protect the employees. All machines in the workshop are maintained according to the manufacturer’s specifications, and where possible, are maintained by the manufacturer themselves.
Installed Equipment in BAC’s plant
- 1 ALT 25 ton rated power press - 1 ALT 40 ton rated power press - 1 EMI-MEC Autosprint - 4 EMI-MEC Microsprint - 1 Milling machine - 2 Standard lathes - 1 Guyson washing machine (Industrial) - 1 Airtowear 11 (Air compressor) - 2 Hydrotest rigs - Welding equipment - Electrical testing equipment - Bespoke Pin Manufacturing equipment
5.5 Storage Facilities & Capabilities BAC has storage and archiving facilities covering in the region of 351m². This space is used as a store for archived documentation and stock storage.
5.6 Outside Yard Area
Additional storage and work areas cover 328m².
5.7 Suppliers to BAC
BAC selects suppliers by filtering possible companies through the ISO 9001 Quality Systems using probing questionnaires, references and supplier audits as necessary. All records of these filtering methods are kept for future use.
Page 38 of 50
Responsible Sourcing Policy BAC Corrosion Control Limited (including RCSL) (BAC) specialises in the following activities: • Design, Manufacture and Supply of Cathodic Protection Systems, Components and
Pin Brazing equipment. • Provision of Cathodic Protection and Pin Brazing Services. Product Stockholder,
Specialist Distributor. • Supplier of Cathodic Protection and Pin Brazing Equipment. • Design, Development, Manufacture and Supply of Corrosion Monitoring, Chemical
Injection and Material Testing Systems for the use in the Oil, Gas, Petrochemical, Water Utility and Civil Engineering Industries.
BAC Corrosion Control Limited recognises the need to provide confidence to its customers, employees and other interested parties that materials used in manufacturing, installation, transportation and other services associated within the business are responsibly sourced and that the business is operated in a sustainable and ethical manner. The BAC - Integrated Management System (IMS) meets the requirements described in BES 6001:2009 - Framework Standard for the Responsible Sourcing of Construction Products. These requirements are fulfilled as follows: • BAC will comply with the principles of BS EN ISO 9001:2008 - Quality Management
System, BS EN 14001:2004 - Environmental Management, BS OHSAS 18001:2007 - Occupational Health & Safety Management Systems and any other relevant standards or documents which augment these including the adherence to Statutory and Regulatory requirements.
• BAC will reduce greenhouse gas emissions associated with its business, as described in the IMS Environmental and Energy Policies as a strategic business objective, in order to minimise their contribution to global warming. BAC will maintain metrics for measuring and reducing greenhouse gas emissions relating to manufacturing activities, products, installation, transportation and other services. The company will also maintain metrics to measure and reduce energy and mains water consumption, raw material usage and waste generation so as to minimise their associated environmental impacts.
• BAC will be responsible stewards of sites occupied in operating its business.
• BAC will supply life cycle assessment data for its products as and when required.
• BAC will operate a suitable supply chain management system within the IMS.
• BAC will operate an ethical business and support the principles of Equal Opportunity in employment and in the provision of its services. The company recognises the importance of developing a skilled and competent workforce.
• BAC will engage with the local community on business matters and by providing employment opportunities. We will also engage with trade associations, government bodies, industry committees and other parties to deliver a sustainable built environment in a manner that is profitable, ethical and operates within pre-determined environmental limits.
Page 39 of 50
6. COMPANY EXPERIENCE
6.1 BAC Recent Experience Projects have been undertaken and successfully completed by BAC’s engineering department since 1999, involving the following services:
− Consultancy − Initial Feasibility and Surveys − Design − Specifications − Procedures − Method Statements and Drawings − Procurement and Supply − Installation and Installation Supervision − Commissioning and Maintenance − Training and Materials/ Products Supply