Page 1 FORM NO. 4AC14-100 (12/2017) BA16 PRODUCT SPECIFICATIONS 16 SEER SPLIT SYSTEM AIR CONDITIONER • R410A Refrigerant • High-quality condenser coil with copper tubing and enhanced lanced fin for maximum heat transfer capacity • Top discharge directs hot air and sound away from living area and shrubbery • All units factory run tested • Easy access to electrical panels, pre-wired for easy hook-up • Liquid line drier shipped loose • All units ETL and ETLC approved and AHRI Certified • Charged for 15 feet of interconnecting tubing • High pressure switch factory installed WARRANTY 10 year limited warranty on compressor,10 year limited warranty on all parts, extended warranty available* *Warranty provides for a total of 10 years of limited warranty coverage (Standard 5-year limited parts warranty plus an additional 5-year limited extended parts warranty). Warranty must be registered online within 60 days of installation to qualify for 10-year coverage. Unregistered equipment defaults to 5-year coverage. Lifetime limited heat exchanger warranty applies to registered equipment only (Standard 20 years with no online registration). See full warranty at www.alliedair.com for terms, conditions and exclusions.
41
Embed
BA16 Specifications...Page 1 FORM NO. 4AC14-100 (12/2017) BA16 PRODUCT SPECIFICATIONS 16 SEER SPLIT SYSTEM AIR CONDITIONER • R410A Refrigerant • High-quality condenser coil with
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1
FORM NO. 4AC14-100 (12/2017)
BA16 PRODUCT SPECIFICATIONS
16 SEER SPLIT
SYSTEM AIR CONDITIONER
• R410A Refrigerant • High-quality condenser coil with copper tubing and enhanced
lanced fin for maximum heat transfer capacity • Top discharge directs hot air and sound away from living area
and shrubbery • All units factory run tested • Easy access to electrical panels, pre-wired for easy hook-up • Liquid line drier shipped loose • All units ETL and ETLC approved and AHRI Certified • Charged for 15 feet of interconnecting tubing • High pressure switch factory installed
WARRANTY 10 year limited warranty on compressor,10 year limited warranty on all parts, extended warranty available*
*Warranty provides for a total of 10 years of limited warranty coverage (Standard 5-year limited parts warranty plus an additional 5-year limited extended parts warranty). Warranty must be registered online within 60 days of installation to qualify for 10-year coverage. Unregistered equipment defaults to 5-year coverage. Lifetime limited heat exchanger warranty applies to registered equipment only (Standard 20 years with no online registration). See full warranty at www.alliedair.com for terms, conditions and exclusions.
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required. 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 6
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 7
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 8
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Out
do
or U
nit Indoor Model
Furnace Model
SE
ER
EE
R
AHRI Rated Capacity
BTUH
Sensible Capacity
CFM
Evap Coil
BA
16L1
8P-1
BC1P29B 95G1UH070BE12 15.1 13 18000 13000 650
BC1P29B 95G2UH045BE12 15.1 13 18000 13000 620
BC1P29B 95G2UH070BE12 15.1 13 18000 13000 650
BC1P29B EFV08BC 15.1 13 18000 13000 650
BC1P30B 80G1UH070BE12 15.1 13 18000 13000 620
BC1P30B 95G1UH045BE12 15.1 13 18000 13000 620
BC1P30B 95G1UH070BE12 15.1 13 18000 13000 650
BC1P30B 95G2UH045BE12 15.1 13 18000 13000 620
BC1P30B 95G2UH070BE12 15.1 13 18000 13000 650
BC1P30B EFV08BC 15.1 13 18000 13000 650
BC1P36B 80G1UH070BE12 15.1 13 18000 13000 620
BC1P36B 95G1UH045BE12 15.1 13 18000 13000 620
BC1P36B 95G1UH070BE12 15.1 13 18000 13000 650
BC1P36B 95G2UH045BE12 15.1 13 18000 13000 620
BC1P36B 95G2UH070BE12 15.1 13 18000 13000 650
BC1P36B EFV08BC 15.1 13 18000 13000 650
BC4X23B 80G1UH070BE12 15.1 13 18000 13000 650
BC4X23B 95G1UH070BE12 15.1 13 18000 13000 650
BC4X23B 95G2UH070BE12 15.1 13 18000 13000 650
BC4X24A 80G1UH045AE12 15.1 13 18000 13000 650
BC4X24B 80G1UH070BE12 15.1 13 18000 13000 620
BC4X24B 95G1UH045BE12 15.1 12.5 18000 13000 635
BC4X24B 95G2UH045BE12 15.1 12.5 18000 13000 635
BC4X24B 95G2UH045BV12 15.1 13 18000 13000 650
BC4X24B EFV08BC 15.1 13 18000 13000 650
BC4X29B 80G1UH070BE12 15.1 13 18000 13000 620
BC4X29B 95G1UH070BE12 15.1 13 18000 13000 650
BC4X29B 95G2UH070BE12 15.1 13 18000 13000 650
BC4X29B EFV08BC 15.1 13 18000 13000 650
BC4X30B 80G1UH070BE12 15.1 13 18000 13000 620
BC4X30B 95G1UH045BE12 15.1 13 18000 13000 620
BC4X30B 95G1UH070BE12 15.1 13 18000 13000 650
BC4X30B 95G2UH045BE12 15.1 13 18000 13000 620
BC4X30B 95G2UH070BE12 15.1 13 18000 13000 650
BC4X30B EFV08BC 15.1 13 18000 13000 650
BC4X36B 80G1UH070BE12 15.1 13 18000 13000 620
BC4X36B 95G1UH045BE12 15.1 13 18000 13000 620
BC4X36B 95G1UH070BE12 15.1 13 18000 13000 650
BC4X36B 95G2UH045BE12 15.1 13 18000 13000 620
BC4X36B 95G2UH070BE12 15.1 13 18000 13000 650
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 9
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 10
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 11
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Out
do
or U
nit Indoor Model
Furnace Model
SE
ER
EE
R
AHRI Rated Capacity
BTUH
Sensible Capacity
CFM
Evap Coil
BA
16
L24P
-1
BC1P29B 95G1UH045BE12 15.1 13 23000 17000 760
BC1P29B 95G2UH045BV12 15.1 13 23000 17000 850
BC1P29B 95G2UH070BE12 15.1 13 23000 17000 800
BC1P29B 95G2UH070BV12 15.1 13 23000 17000 850
BC1P29B EFV08BC 15.1 12.5 23000 17000 850
BC1P30A 80G1UH045AE12 15.1 12.5 23000 17000 850
BC1P30A 80G2UH070AV12 15.1 13 23000 17000 850
BC1P30B 80G1UH070BE12 15.1 13 23000 17000 800
BC1P30B 95G1UH045BE12 15.1 13 23000 17000 760
BC1P30B 95G1UH070BE12 15.1 13 23000 17000 800
BC1P30B 95G2UH070BE12 15.1 12.5 23000 17000 800
BC1P30B 95G2UH070BV12 15.1 12.5 23000 17000 850
BC1P30C 95G2UH090CV12 15.1 13 23000 17000 850
BC1P36A 80G1UH045AE12 15.1 13 23000 17000 850
BC1P36B 80G1UH070BE12 15.1 13 23000 17000 820
BC1P36B 80G2UH090BV16 15.1 13 23000 17000 800
BC1P36B 95G1UH070BE12 15.1 13 23000 17000 800
BC1P36B 95G2UH045BV12 15.1 13 23000 17000 850
BC1P36B 95G2UH070BE12 15.1 13 23000 17000 800
BC1P36B EFV08BC 15.1 13 23000 17000 850
BC4X23A 80G2UH070AV12 15.1 13 23000 17000 850
BC4X23B 80G1UH070BE12 15.1 13 23000 17000 800
BC4X23B 80G2UH090BV16 15.1 12.5 23000 17000 800
BC4X23B 95G2UH070BV12 15.1 13 23000 17000 850
BC4X23B EFV08BC 15.1 12.5 23000 17000 850
BC4X24B 95G1UH045BE12 15.1 12.5 23000 17000 735
BC4X29A 80G1UH045AE12 15.1 13 23000 17000 850
BC4X29A 80G2UH070AV12 15.1 13 23000 17000 850
BC4X29B 80G1UH070BE12 15.1 13 23000 17000 800
BC4X29B 80G2UH090BV16 15.1 13 23000 17000 800
BC4X29B 95G2UH045BV12 15.1 13 23000 17000 850
BC4X29B 95G2UH070BV12 15.1 13 23000 17000 850
BC4X29B EFV08BC 15.1 12.5 23000 17000 850
BC4X30A 80G1UH045AE12 15.1 12.5 23000 17000 850
BC4X30A 80G2UH070AV12 15.1 13 23000 17000 850
BC4X30B 80G1UH070BE12 15.1 13 23000 17000 800
BC4X30B 95G1UH070BE12 15.1 13 23000 17000 800
BC4X30B 95G2UH070BE12 15.1 12.5 23000 17000 800
BC4X30B 95G2UH070BV12 15.1 12.5 23000 17000 850
BC4X30C 95G2UH090CV12 15.1 13 23000 17000 850
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 12
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 13
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 14
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 15
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 16
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 17
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 18
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Out
do
or U
nit Indoor Model
Furnace Model
SE
ER
EE
R
AHRI Rated Capacity
BTUH
Sensible Capacity
CFM
Evap Coil
BA
16
L36P
-1
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 19
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Out
do
or U
nit Indoor Model
Furnace Model
SE
ER
EE
R
AHRI Rated Capacity
BTUH
Sensible Capacity
CFM
Evap Coil
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 20
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 21
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 22
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 25
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 26
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 27
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 28
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 29
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 30
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 31
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 32
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 33
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 34
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 35
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 36
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 37
16 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
Note: 1 Certified in accordance with Unitary Air Conditioner Certification Program, which is based on AHRI Standard 210/240 2 Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required 3 A blower time delay relay is required to achieve AHRI rating. This feature is standard on all Allied Air Enterprises furnace and AH products.
Page 38
14 SEER SPLIT SYSTEM AIR CONDITIONER BA16
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES