conforming to military grade specs! Antioxidants & Anticorrosives new standard of the highest standard of protection - 24/7 Engineered to the Highest Standard Engineered to the Highest Standard Introducing NEW Ethanol Shield 7 24 P R O T E C T I O N Conforms to Military Specifications (Mil-Spec) for Antioxidants and Anticorrosives...This Level of Protection Has Never Been Available To The General Public Until Now Proprietary Top Tier Detergent – reduces need for higher octane as machine ages Phase Separation Inhibitor Mil-Spec All Metal Anticorrosive Package (Top Level ASTM & NACE Ratings) Mil-Spec Antioxidant Package - Up To 25X More Anti- Oxidants Compared To Leading Competitors Bonds 2 Cycle Oil To Gasoline / Ethanol Mix Combustion Cool Technology (CCT) Upper Cylinder Lubrication 15% More Rubber and Plastic Protection Than Today’s Ethanol Shield Dramatically Slows Fuel Aging (See Third Party Verification Other Side) 704-674-6963 [email protected] www.EngineTech.us
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
conforming to military grade specs!Antioxidants & Anticorrosives
new standard of
the highest standard of protection - 24/7
Engineered to theHighest Standard
Engineered to theHighest Standard
Introducing NEW Ethanol Shield
724PROTECTIO
N
Conforms to Military Specifications (Mil-Spec) for Antioxidants and Anticorrosives...This Level of Protection Has Never Been Available To The General Public Until Now
Proprietary Top Tier Detergent – reduces need for higher octane as machine ages
Phase Separation Inhibitor
Mil-Spec All Metal Anticorrosive Package (Top Level ASTM & NACE Ratings)
Mil-Spec Antioxidant Package - Up To 25X More Anti-Oxidants Compared To Leading Competitors
Bonds 2 Cycle Oil To Gasoline / Ethanol Mix
Combustion Cool Technology (CCT)
Upper Cylinder Lubrication
15% More Rubber and Plastic Protection Than Today’s Ethanol Shield
Dramatically Slows Fuel Aging (See Third Party Verification Other Side)
704-674-6963 [email protected]
Nitrogen content is an indicator of cleaning ability.
RESULT: Our addi<ves (Top Tier Detergent) are shown to have a high Nitrogen content, known for its cleaning capability. Our targeted formula<on and resul<ng Nitrogen content will improve cleaning capability even further.
Oxida&on Stability (ASTM TEST D525)
Water Tolerance (Modified ASTM TEST
E1064)
Corrosion Ra&ng 1 -‐ 5 (NACE Standards TEST for ferrous metals)
Cleaning (Nitrogen Content)
Shows <me (in minutes) for fuel to become unstable (e.g. break down, form gums)
E10 Base Fuel
(10% Ethanol)
Ethanol Shield
Mil-‐Spec E10
Base Fuel (10% Ethanol)
Ethanol Shield Added
RESULT: Ethanol Shield greatly increases stabiliza<on, more than 6X than fuel without our addi<ves.
Shows the ra<ng from 1 (poor) to 5 (excellent) of the ability to resist corrosion, per NACE standards. NACE Interna,onal is the world’s leading professional organiza,on for the corrosion control industry.
RESULT: Ethanol Shield has the highest ra<ng for corrosion resistance, vastly improving fuel’s corrosion resistance beyond those without our addi<ves.
Ethanol Free Fuel vs Treated Fuel
Shows the tested Nitrogen content in Parts Per Million (PPM) of our products.
Ethanol Shield PPM*
* PPM test results indicate 2.05 for Ethanol Shield. New formula<ons increase PPM to targeted results of 30.
0
200
400
600
800
1000
1200
1400
1600
E10 Fuel (10% Ethanol) vs Treated Fuel
240 Minutes
(ASTM Min Standard)
1500 + Minutes .7
0
2
4
6
0
2
4
6
Ethanol Free Base Fuel
Ethanol Shield Added
5 (highest level)
E10 Base Fuel
(10% Ethanol) Ethanol Shield
Added
.7
5 (highest level)
E10 Fuel (10% Ethanol) vs Treated Fuel
Corrosion Protec&on (ASTM TEST D130)
This test evaluates the degree to which a lubricant will corrode copper-‐containing materials (i.e. bronze, brass) • Rates oils by immersing a
prepared copper strip in the lubricant at 2 temperatures in typical range of opera<on.
• Ra<ngs range from “1a” with slight discolora<on, but barely no<ceable (similar to a freshly polished strip), to “4c”or severely corroded, blackened and pi[ed.
RESULT: Ethanol Shield received the highest ra<ng of “1a”.
Ethanol Shield received a “1a” ra3ng in the ASTM
D130 test.
ASTM Copper Strip Corrosion Standards
.7
0
10
20
30
40 30
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
Shows % of water fuel is able to tolerate or “hold” in suspension un<l Phase Separa<on occurs.
Phase Separa,on is the point the ethanol and water in the fuel combine and reach a satura<on point. At satura<on, this mixture “falls out” and se[les on the bo[om of a tank.
.53%
.57%
RESULT: Our addi<ves are proven to increase the threshold at which Phase Separa<on occurs, thereby helping prevent Phase Separa<on and its nega<ve effects.
E10 Fuel (10% Ethanol) vs Treated Fuel
Third Par t y Lab Test ResultsThird Par t y Lab Test Results
the highest standard of protection - 24/7
conforming to military grade specs!Antioxidants & Anticorrosives
new standard of
704-674-6963 [email protected]
Related Documents
