Top Banner
INSTALLATION 2 Suggest installing near the bathtub to determine seat back and handle bar left or right placement. NOTE: BEFORE ASSEMBLY, SEE BACK PAGE TO SWITCH FOR RIGHT OR LEFT HAND USE. B152-11 B156-11 1 a. Remove commode bucket holder frame. b. Remove seat back (L-Bars). d. Rotate seat. e. Re-Attach 4 screws. f. Replace seat back noting direction. g. Replace commode bucket holder frame c. Remove 4 screws. TO SWITCH COMMODE SEAT DIRECTION: OUTSIDE
2

B152-B156 INST Commode IN - Rehabmart.com

Mar 23, 2022

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: B152-B156 INST Commode IN - Rehabmart.com

INSTALLATION

2

Suggest installing near the bathtub to determine seat back and handle bar left or right placement.

NOTE: BEFORE ASSEMBLY, SEE BACK PAGE TO SWITCH FOR RIGHT OR LEFT HAND USE.

B152-11B156-11

1

a. Remove commode bucket holder frame.

b. Remove seat back (L-Bars).

d. Rotate seat. e. Re-Attach 4 screws.

f. Replace seat back noting direction.

g. Replace commode bucket holder frame

c. Remove 4 screws.

TO SWITCH COMMODE SEAT DIRECTION:

OUTSIDE

Page 2: B152-B156 INST Commode IN - Rehabmart.com

Carex Health Brands All Rights Reserved© 2009 Carex Health Brands

40-B152-11_00Carex Health Brands

4

Slide leg attachments with tips onto bottom of all four legs.

Make sure pin has clicked into holes and that all legs are level.

Assemble legs with armrest on side nearest commode cut-out section.

Assemble legs without armrest on side away from commode cut-out section.

Slide in commode bucket.

7

Clips must be secured on all 4 legs.

3 5

6

INSIDE