B1 NEMA 3R ENCLOSURES Section B Index RSC Series NEMA 3R Screw Cover Wall-Mount .........B2 RHC Series "Small" NEMA 3R Hinge Cover Wall-Mount ..............................................B4 "Medium" NEMA 3R Hinge Cover Wall-Mount ..............................................B6 LOH Series NEMA 3R Hinge Cover Wall-Mount .........B8 WCT Series NEMA 3R Screw Cover Wall-Mount .......B10 CT Series NEMA 3R Single Door Hinge Cover ......B12 NEMA 3R Double Door Hinge Cover .....B13 www.hubbell-wiegmann.com Data Subject To Change Without Notice
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
RHC Series"Small" NEMA 3R Hinge CoverWall-Mount..............................................B4"Medium" NEMA 3R Hinge CoverWall-Mount..............................................B6
LOH SeriesNEMA 3R Hinge Cover Wall-Mount .........B8
CT SeriesNEMA 3R Single Door Hinge Cover ......B12NEMA 3R Double Door Hinge Cover.....B13
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
RSC SERIES ENCLOSURESNEMA 3R SCREW COVER WALL-MOUNT
B2
FEATURES-SPECIFICATIONS
ApplicationsDesigned for use as wiring boxes andjunction boxes. Provide protection in out-door applications against rain, sleet, andsnow, or indoors against dripping water.
Construction• Bodies and doors fabricated from 16,
14, or 12 gauge carbon steel andpre-galvanized steel (reference table)
• Drip shield top and smooth seam-less sides and front
• Knockouts are standard on bottomof 4.00" and 6.00" deep enclosures(reference table)
• A slip-on reversible cover issecurely fastened with screwslocated along bottom edge
• No gasketing is required• Hasp for padlocking or meter seal
is provided
Finish• ANSI-61 gray polyester powder
inside and out over carbon steel• Pre-galvanized steel (unfinished)
Accessories• See pages J1-J22
Industry StandardsUL 50, Types 1 & 3RCSA Certified, Type 1 & 3RNEMA/EEMAC Type 1 & 3R
‡Not UL Listed. No hasp or meter seal.Must specify CSA Label when ordering.
Notes: For removal of cover, move downward, thenoutward.4.00x4.00x4.00 only has 2 mounting holescentered horizontally.4.00x6.00x4.00 only has 2 mounting holescentered vertically.
Note: 8", 10" and 12" deep enclosures do nothave mounting embosses in back ofenclosure, only mounting holes.
Note: Second numerical value of catalog #represents height.
**Also available with No KnockoutsAdd “NK” to Catalog Number
RSC060604
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
(+) All products, unless otherwise denoted by a (+), are: H+1/8", W+1/8", D+3/16"
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
RSC SERIES ENCLOSURESNEMA 3R SCREW COVER WALL-MOUNT
B3
H
DINSIDE
W
0.63 TYPSEE NOTE 1
A
A B A
B A AF F
BB A F A
A B A F A B A
15", 18", &24"WIDTH
12"WIDTH
10"WIDTH
6" & 8"WIDTH
4" WIDTH
Knockout Patterns
1.63 1.63
1.63 1.63 1.94 1.63
1.63 1.63 1.94 1.63 1.63
1.63 1.63 1.63 1.94 1.63 1.63 1.63
F
F
0.88TYP
1.56 TYP
0.13TYP
Ø0.84TYP
W-3.00
H-3.00
HASP &METER SEAL
4.00" X 6.00"MOUNTING
4.00" X 4.00"MOUNTING
NOTES:
1. Enclosures with D = 8.00" or more do not havean internal flange.
1.50
1.31
2.06
3.00
Ø0.28TYP
Ø0.28 TYP.
Ø0.28 TYP.
A -- 1/2" TO 3/4"B -- 3/4" TO 1"F -- 1" TO 1-1/4"
1.56
2.06
1.56 TYP
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
RHC SERIES ENCLOSURES“SMALL” NEMA 3R HINGE COVER WALL-MOUNT
B4
FEATURES-SPECIFICATIONS
ApplicationsDesigned for use as wiring boxes andjunction boxes. Provides protectionin outdoor installations against rain,sleet, and snow, or indoors againstdripping water.
Construction• Bodies and doors fabricated from
16 gauge carbon steel• Continuous hinge• Lid is supplied with a padlockable
draw latch
Industry StandardsUL 50, Types 1 & 3RCSA Certified, Type 1 & 3RNEMA/EEMAC Type 1 & 3R
UL Fi le E6924
CSA Fi le LL66078
CATALOG BODY/DOOR ENCLOSURE SIZE KNOCKOUT BACK PANEL CATALOG NUMBER* BACK PANELC E
NUMBER STEEL GAUGE H X W X D PATTERN WHITE PERFORATED SIZE A X B
• Hinge is made of carbon steel witha stainless steel hinge pin
• Standard size enclosures are providedwith knockouts in bottom
• Weldnuts provided for mountingoptional back panels
• External mounting plates, top andbottom of enclosure
• Knockouts on bottom of enclosure• Grounding provisions provided
* Back panels must be ordered separately.NOTE: Second numerical value of catalog # represents height.
Finish• ANSI-61 gray polyester powder
inside and out• Optional back panels are white
polyester powder• Optional perforated panels are
painted white polyester powder(See page I3)
Accessories• Back panels (reference tables)• See pages J1-J22
RHC060604
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
RHC SERIES ENCLOSURES“SMALL” NEMA 3R HINGE COVER WALL-MOUNT
B5
0.31 TYP
0.91
A
0.31 TYP
0.19
B
1.00 TYP ALL KO'S
D
C E H
W
(PATTERNS ARE CENTERED IN WIDTH)
3
0.44 INSIDE
F = 3/4" X 1" CONCENTRIC KOG= 1/2" X 3/4" CONCENTRIC KOH= 1" SOLID KOI = 1-1/4" SOLID KO
KNOCKOUT PATTERN
GIHGF
1.631.941.631.63
HINGECONTINUOUS DOOR LATCH
PADLOCKINGQUICK RELEASE
(ORDER SEPARATELY)OPTIONAL SUB PANEL
SLOT TYP0.31 X 0.56 MOUNTING
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
RHC SERIES ENCLOSURES“MEDIUM” NEMA 3R HINGE COVER WALL-MOUNT
B6
FEATURES-SPECIFICATIONS
ApplicationsDesigned for use as wiring boxes andjunction boxes. Provide protection inoutdoor installations against rain,sleet, and snow, or indoors againstdripping water.
Construction• Bodies and doors fabricated from14 gauge carbon steel
• Continuous hinge• Hinge is made of galvanized steelwith a stainless steel pin
• No knockouts• Collar studs provided for mountingoptional back panels
• External mounting plates, top andbottom of enclosure
• Hasp and staple provided forpadlocking
Finish• ANSI-61 gray polyester powderinside and out
• Optional back panels are whitepolyester powder
• Optional perforated panels arepainted white polyester powder(See pages I2-I7)
Accessories• Back panels (reference tables)• See pages J1-J22
Industry StandardsUL 508, Types 1 & 3RCSA Certified, Type 1 & 3RNEMA/EEMAC Type 1 & 3R
UL Fi le E6924
CSA Fi le LL66078
W-2.75OPENING
H-2.75OPENING
B
A
H
E
C
XX
F
0.50TYP
0.50TYP
0.31 X 0.56 SLOTSEE NOTE 1
OMIT MIDDLEDOOR SCREW IFH < 30.00"
PADLOCKINGHASP
D
1.09
PANELORDER SEPARATELY
DRIP SHIELD
1.50
1.50
0.88
0.88
OMIT MIDDLESTUD IF W = 30.00"
OR LESS
OMIT MIDDLESTUD IF H = 30.00"
OR LESS
VIEW WITHCOVER REMOVED
3/8 - 16COLLAR STUD
OMIT BODY STIFFENERIF H < 30.00"
CONTINUOUSHINGE
SECTION X-X
DOORSTIFFENER
1.16
12 GA.
1.250.69
NOTES:
1. RHC303012 & larger have a 0.38 X 0.63mounting slot.
0.27G
RHC161606
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
RHC SERIES ENCLOSURES“MEDIUM” NEMA 3R HINGE COVER WALL-MOUNT
B7
BACK PANEL CATALOG NUMBER*CATALOG BODY/DOOR ENCLOSURE SIZE
“MED I UM” RHC SER I E S H I NGE COVER ENC LOSURES
* Back panels must be ordered separately.
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
LOH SERIES ENCLOSURESNEMA 3R HINGE COVER WALL-MOUNT
B8
FEATURES-SPECIFICATIONS
ApplicationsDesigned for use as wiring box andjunction box. Provide protection inoutdoor installations against rain,sleet, and snow, or indoors againstdripping water.
Construction• Bodies and doors fabricated from
16 or 14 gauge carbon steel(reference table)
• Drip shield top and seam-freesides, front, and back
Industry StandardsUL 50, Types 1 & 3RCSA Certified, Type 1 & 3RNEMA/EEMAC Type 1 & 3R
UL Fi le E6924
CSA Fi le LL66078
CATALOG BODY/DOOR ENCLOSURE SIZE BACK PANEL BACK PANELC E F G H I J
NUMBER STEEL GAUGE H X W X D CATALOG NUMBER* SIZE A X B
* Back panels must be ordered separately. If a back panel is required, an optional panel mounting kit is required. See page B9.** One draw pull catch.Note: If mounting feet are required, an optional mounting foot kit is required. See page B9.
• Door is hinged on left side with liftoff hinges
• Stainless steel hinge pin• No knockouts• Mounting holes are provided on
back of enclosure• Door fastened securely with draw
pull catch• Provision for padlocking• Grounding provisions provided
Finish• ANSI-61 gray polyester powder
inside and out• Optional back panels are white
polyester powder
Accessories• Mounting feet kit (reference table,
see page B9)• Back panels (reference table)• For accessories see pages J1-J22
LOH121206
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
LOH SERIES ENCLOSURESNEMA 3R HINGE COVER WALL-MOUNT
B9
AE
C
B
TYPH
1.18
1.06
H TYP
HINSIDE
J
I
WINSIDE
Ø 0.28 TYP
G
KNOCKOUT PROVIDEDFOR OPTIONAL PANEL
MOUNTING KIT0.50
OPTIONALMOUNTING FOOT
OPTIONAL PANELMOUNTING KIT
LIFT-OFFHINGES
0.20
(Order Separately)PANEL
Door LatchPadlockingQuick-Release
0.50
0.50 F
INSIDED
View With Cover Removed & Panel Installed
0.63 TYPFLANGE3 SIDES
CATALOG NUMBER DESCRIPTION
WAPMK3RL016Panel Mount ing Ki t for16 ga. Enclosures
WAPMK3RL014Panel Mount ing Ki t for14 ga. Enclosures
PANE L MOUNT I NG K I T ( OPT I ONA L )
CATALOGDESCRIPTION
OVERALL GAUGE OF HOLE
NUMBER WIDTH OF FOOT MATERIAL SPACING
WAMFK3RL016Mount ing Foot Ki t for Enclosures 5.00 (127) 14 4.00 (102)16x12x6 and smal le r
WAMFK3RL014Mount ing Foot Ki t for Enclosures 14.00 (356) 10 13.00 (330)16x16x6 and larger
MOUNT I NG FOOT K I T ( OPT I ONA L )
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
WCT SERIES ENCLOSURESNEMA 3R SCREW COVER WALL-MOUNT
B10
FEATURES-SPECIFICATIONS
ApplicationsDesigned for use as transformerhousings, junction boxes, and serviceboxes.
Construction• Drip shield top and smooth seamlesssides and front
• A slip-on removable cover issecurely fastened with platedscrews located along bottom edge
Industry StandardsUL 50, Types 1 & 3RCSA Certified, Type 1 & 3RNEMA/EEMAC Type 1 & 3R
• No gasketing is required• Mounting holes on back of cabinet• Door handles provided• Hasp for padlocking and provisions
for meter seal are provided• For removal of cover, move down-
ward, then outward
Finish• ANSI-61 gray polyester powderinside and out
Accessories• See pages J1-J22
WCT242412
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
WCT SERIES ENCLOSURESNEMA 3R SCREW COVER WALL-MOUNT
B11
RIGHT SIDE
REAR VIEW
FRONT VIEW
0.13 TYP
D + 0.50
0.130.38
4.00
1.25
METER SEALHASP AND D
0.25 TYP
0.75
Ø 0.44 TYP
DRIP SHIELD
H - 3.00
W - 3.00
1.56 TYP
1.56 TYP
W
4.00
H/2
0.75
20.00
H
0.750.25 TYP
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
CT SERIES ENCLOSURESNEMA 3R SINGLE DOOR HINGE COVER
B12
FEATURES-SPECIFICATIONS
ApplicationsEnclosures are designed as a housingfor current and voltage transformers,recorders, meters, junction, servicebox, relay and/or for terminal instru-mentation.
Construction• Manufactured from 14 and 12
gauge carbon steel
Industry StandardsUL Listed Type 3R
UL Fi le E23553
CSA Fi le LL66078
CATALOG ENCLOSURE SIZE BODY PANELREBMUNGOLATACEGUAGDXWXHREBMUN
CT SER I E S S I NG L E DOOR H I NGE COVER ENC LOSURES
• Fully seam welded and groundsmooth, with weep hole
• Drip shield• Lift off hinges, gasketed doors• Supplied with non-locking 1/4 turn
latch• Meter seal provisions• Mounting holes in back
• Supplied with studs in back ofenclosure to support optionalwood sub panel
Finish• ANSI 61 polyester powder inside
and out
CTSD242412
2.12
LIFT-OFFHINGES
DRIP SHIELD
H
D
1.50W-3.00
1.50
H-3.00
1/4 TURNLATCH
W-4.75
H-4.75
ø 0.38 TYP.MOUNTING HOLES
3/8-16 PANELSTUD TYP(PANEL NOTINCLUDED)
FLANGE0.66 TYP.
FRONT VIEW(WITH COVER REMOVED)
W
OMIT MIDDLESTUDS IFW < 31.00
H < 31.00STUDS IFOMIT MIDDLE
NOTE: Second numerical value of catalog # represents height.
www.hubbell-wiegmann.comData Subjec t To Change Wi thout Not ice
CT SERIES ENCLOSURESNEMA 3R DOUBLE DOOR HINGE COVER
B13
FEATURES-SPECIFICATIONS
ApplicationsEnclosures are designed as a housingfor current and voltage transformers,recorders, meters, junction, servicebox, relay and/or for terminal instru-mentation.