FFC FLAT FLEXIBLE CABLES AXOJUMP FLAT CABLES WITH ROUND PINS AXOSTRIP BULK FLAT FLEXIBLE CABLES FLEXLINK ® FDC-FLAT DISPLAY CONNECTIONS AXOLINK FDC FOR HIGH SPEED (LVDS) & ULTRA HIGH SPEED (UHS) TRANSMISSION FDC 100 ® Range of Round-end Flat Cables (RFC) Can be soldered or inserted to achieve through holes board- to-board interconnections Available in several pitches including 1.00 mm, 1.25 mm, 1.27mm, 1.905 mm, 2.00 mm, 2.54 mm and 5.08 mm pitches Made up of tin plated copper insulated with Polyes- ter, Polyimide or Aramid tapes 2 types of ends are possible: - Round conductors on both ends: lower production costs since no connectors are required - Round conductors on one end, flat conductors on the other end: this version which is dismountable is compatible with ZIF connectors Advantages • High resistance to bending and vibration • Easy and fast installation • Power transmission • Ready to use : wire stripping and cutting to length is not required • Low assembly cost: the Round-end Flat Cables are wave-soldered with the other components • Excellent flexibility Designed for board to display interconnections Standard Flat Flexible Cables and connectors such as DF-9; DF-19, FI-SE, FI-X at one or both ends Flat Flexible Cables: 0.5, 1.00 and 1.25 mm pitches Advantages • Space saving: low profile, narrow width design. • Reliable connection • Excellent flex life and flexibility • Ready-to-plug connection • Foldable for easy integration mounting • FFC lengths to requirements but standardized lengths offered for quicker service • Simple locking mechanism (DF-9) • Shielded version for EMI protection AXON’ INTERCONNECTORS & WIRES: MADE-IN-INDIA CABLE ASSEMBLIES Axon’ Interconnectors & Wires PVT LTD designs and manufactures state-of-the-art wires and cable assemblies terminated with Micro-D connectors, as well as RF & microwave cable assemblies for defence and aerospace applications. The factory is equipped with an ISO 8 clean room dedicated to space applications. The company has been located in Bangalore since 2010 and has its own design department. Our engineers are able to provide customers with technical support for any product manufactured within the Axon’ group. Add-on flat flexible cables can be marked, folded or punched by our local skilled operators. APPLICATIONS Automotive • Consumer electronics • Defense & aeronautics electronics • Medical • Others • Increased flexibility: can retain the cables and the shielding without damage due to bending or pulling. Good shock and vibrations re- sistance: prevents fatigue and damages to internal compo- nents. Protects from physical, harsh and extreme environments: the PU material has very good abrasion resistance. Ingress protection: water and dust proof. Better finishing : smooth shape, with clean edges. Compact and lightweight Very good alternative to heat- shrink boots and backshells. Bare or tin plated copper conductors insulated with Polyester film For any application where space reduction and flexibility are the most important criteria Crimped contacts termination Custom designed solutions with specific conductors and pitches Advantages • Very flexible cables • Space saving cabling • Supplied on the reel: bulk flat flex cables can be cut to length to your needs • Compatible with most of the crimp contacts • Temperature rating: -40°C to 105°C AXON’ FLAT CABLES & ASSEMBLIES RANGE FLAT FLEXIBLE CABLES FOR ELECTRONICS As part of the Axon’ group, specialist in interconnect solutions, Axon’ Inter- connectors and Wires PVT is then able to offer a complete range of flat flexible cables and assemblies for very deman- ding applications. Flat Flexible Cables (FFC), Flat Cables with round pins for board-to-board interconnection, bulk Flat Flexible Cables for automotive, these are just a few examples of the so- lutions we are able to provide you. All the Axon’ flat cables and assemblies range are produced in Asia (China) and Europe (Hungary). The headquarters of the group is located in France. AXON’ GROUP QUALITY ASSURANCE CURRENT RATINGS PER CONDUCTORS FFC FLAT FLEXIBLE CABLES AXOJUMP 0.30 mm PITCH: 0.30A 0.50 mm PITCH: 0.35A to 0.55A 1.00 mm PITCH: 0.80A to 1.25A 1.25 mm PITCH: 0.80A to 1.40A 1A to 3A 0.9A to 3A For further details, please refer to the following technical brochure: http://www.axon-cable.com/publications/Flat-Flexible-Cables-and-Assemblies.pdf FLAT CABLES WITH ROUND PINS AXOSTRIP BULK FLAT FLEXIBLE CABLES FLEXLINK ® Designed for board-to-board interconnections and made up of flat conductors insulated with Polyester or Polyimide tapes (from 0.3mm to 1.25mm pitch) Custom designed Flat Flexible Cables incorporating folds, shields, notches, punching, slitting and marking Flat Flexible Cable termination is compatible with ZIF (Zero Insertion Force) / LIF (Low In- sertion Force) connectors: the cables are equipped with rein- forcement tape to strengthen the ends, or by soldering Advantages • Extremely small dimensions • Easy and fast installation • Excellent flexibility & flexlife • Flat cables with gold plating on the stripped end can be offered to guarantee the absence of tin whiskers • EMI shielding with aluminium tape • ISO 9001 • ISO 14001 • ISO 45001 • ISO TS 16949 • EN 9100 • ISO 13485