AX32 | DX32 Monitor Control AX32 | Analogue Mic/Line AD/DA/DD matrix DX32 | Digital interface and matrix All trademarks are recognized as the property of their respective owners. The AX32 and DX32 provide a unique solution for easy and flexible monitor control and signal insert management using a variety of analogue and digital audio interfaces. Monitor control is made via EUCON™ enabled DADman software which can be configured for a variety of user defined I/O set-ups. The AX32 or DX 32 process the matrix settings, signal levels, summing and downmix. Using EUCON monitor enabled control surfaces, control room monitors and individual monitoring, cues, stims and signal inserts can be managed quickly and precisely. Control can also be performed directly from NTP 's DADman software. The AX32 and DX32 have identical ultra-high-quality audio processing. The AX32 frame can optionally be equipped with analogue and/or 3G-SDI audio cards. Monitor functionality is also available for the NTP Penta 720 and Penta 721 routing and networking interfaces. Key features � Monitor controller, talkback, cue mixer and folddown � Built-in matrix for flexible routing and digital insert � Monitor control via Avid EUCON 3 � Support for Avid Artist, S6, MC Pro and 5-MC � Monitor control via DADman GUI � All audio channel formats can be configured (eg. 5.1, 7.1) � Pristine mic pre A/D and D/A conversion � I/O via DigiLink™, MADI, AES3, Dante™, Analogue and SDI Sources Inserts Control Room & Monitor outputs Externals DAW TB Alt 2 Alt 1 Mon D Mon A Cntr Rm Mon Main Spkr Sel. Level Dim Cut Level & Cut Monitor Matrix mono ch. based Analogue Digilink MADI AES3 Dante SDI Sources Inserts Control Room & Monitor outputs Externals DAW TB Alt 2 Alt 1 Mon D Mon A Cntr Rm Mon Main Spkr Sel. Level Dim Cut Level & Cut Monitor Matrix mono ch. based Analogue Digilink MADI AES3 Dante SDI Avid S6 MTM master module