AVM MTA Provisioning Guide v07.pdf

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

MTA voiceline provisioning with FRITZ!Box Cable

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

In the current implementation (minimum firmware version FRITZ!OS 05.50), only packetcable 2.0 (Basic flow) is supported. The Basic Flows are a simplified DOCSIS-like provisioning flows with no Kerberos or SNMPv3 security and no SNMP enrollment via SNMP INFORM. The following provisioning flow describes the activation of the MTA interface and the minimum setup of DHCP options:

- The CM requests the DHCP Option 122 - The Option 122 must include the Suboption "dhcp-server-1" and/or "dhcp-server-2" - If the CM is operational, the second Interface "mta0" will be activated and the Option 122 will be requested. This Interface will send in Option 60 (Vendor Class Identifier) "pktc2.0:". The coming offer must

include the Options:

Option 12 (host-name) : e.g.: MTA-0-24-fe-fa-c1-b5 Option 122.1 (dhcp-server-1) : e.g.: 212.42.239.35 Option 122.3 (provision-server) : e.g.: 0 "docsis.avm.de"; Option 122.6 (krb-realm-name) : only "BASIC.1" supported. Option 122.8 (timer value in sec.) : if offered, max. 30 (default 10)

- Than the MTA Interface will request TFTP Server and request the provided file, like:

Main { MtaConfigDelimiter 1; SnmpMibObject pktcMtaDevEnabled.0 Integer 1; SnmpMibObject avmSipGlobalCountryCode.0 String "49" ; SnmpMibObject avmSipGlobalOKZ.0 String "30" ; SnmpMibObject avmSipGlobalUseDQOS.0 Integer 1 ; SnmpMibObject avmSipGlobalDialogLimit.0 Integer 32 ; SnmpMibObject avmSipRegistrar.1 String "1und1.de" ; SnmpMibObject avmSipDTMFMethod.1 Integer 2; SnmpMibObject avmSipClirMethod.1 Integer 5; /* rfc3325 */ SnmpMibObject avmSipUseMWI.1 Integer 1 ; SnmpMibObject avmSipCCBSenable.1 Integer 1 ; SnmpMibObject avmSipPtime.1 Integer 30 ; SnmpMibObject avmSipEnable3XX.1 Integer 1 ; SnmpMibObject avmSipPtimeAttribute.1 Integer 1 ; SnmpMibObject avmSipSTUNServerFQDN.1 String "provider.de" ; SnmpMibObject avmSipUAUsername.1 String "4930NNNNNNNN" ; SnmpMibObject avmSipUANumber.1 String "NNNNNNNN" ; SnmpMibObject avmSipUAPassword.1 String "*****" ; SnmpMibObject pktcMtaDevProvConfigHash.0 HexString NNNNN ; MtaConfigDelimiter 255; }

Attached all MID discriptions and OIDs for AVM MIBs. Please note: due to new architecture in FRITZ!Box 6490 Cable (only) the TLV 220 (EDVA) must be enabled in CM File: >> GenericTLV TlvCode 220 TlvLength 3 TlvValue 0x010101;

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

MAC addresses for provisioning: On the bottom sticker of FRITZ!Box Cable are read- and scanable CM and MTA MAC-Adresses.* * These information are not yet available on all devices.

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

Global SIP Settings: OID: 1.3.6.1.4.1.872.1.4.1.X avmSipGlobalCountryCode : 1 avmSipGlobalOKZ : 2 avmSipGlobalUseDQOS : 3 avmSipGlobalFaxT38Enable : 4 avmSipGlobalGUIReadOnly : 5 avmSipGlobalTosSIP : 6 avmSipGlobalTosRTP : 7 avmSipGlobalTosRTCP : 8 avmSipGlobalDialogLimit : 9 avmSipGlobalLKZPrefix : 10 avmSipGlobalOKZPrefix : 11 avmSipGlobalCountryCode SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "country code without leading '0'" avmSipGlobalOKZ SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "area code without leading '0'" avmSipGlobalUseDQOS SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Use DQOS" avmSipGlobalFaxT38Enable SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Try to use T38 for fax" avmSipGlobalGUIReadOnly SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "customer is not allow to change any settings" avmSipGlobalTosSIP SYNTAX INTEGER (0..63) MAX-ACCESS read-write DESCRIPTION "Type of Service for SIP packets" avmSipGlobalTosRTP SYNTAX INTEGER (0..63) MAX-ACCESS read-write DESCRIPTION "Type of Service for RTP packets"

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

avmSipGlobalTosRTCP SYNTAX INTEGER (0..63) MAX-ACCESS read-write DESCRIPTION "Type of Service for RTCP packets" avmSipGlobalDialogLimit SYNTAX INTEGER (0..32) MAX-ACCESS read-write DESCRIPTION "max dialogs over all lines" avmSipGlobalLKZPrefix SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "LKZ prefix, default '00'" avmSipGlobalOKZPrefix SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "OKZ prefix, default '0'"

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

SIP profile settings avmSipProfile SYNTAX SEQUENCE OF AvmSipProfileEntry MAX-ACCESS not-accessible DESCRIPTION "Table for SIP profiles." avmSipProfileEntry SYNTAX AvmSipProfileEntry MAX-ACCESS read-only DESCRIPTION "Entries for SIP profiles." OID: 1.3.6.1.4.1.872.1.4.2.1.x avmSipProfileIndex : 1 avmSipUseOKZ : 2 avmSipUseLKZ : 3 avmSipEmergencyRules : 4 avmSipAKNRule : 5 avmSipKeepLKZPrefix : 6 avmSipKeepOKZPrefix : 7 avmSipGUIReadOnly : 10 avmSipProtocolPrefer : 11 avmSipRegistrar : 12 avmSipOutboundProxy : 13 avmSipOutboundProxyWithoutRouteHeader : 14 avmSipRegisterFetchUnsupported : 15 avmSipRegistrationTTL : 16 avmSipRegisterFailwait : 17 avmSipRegisterFailwaitMax : 18 avmSipSTUNServerFQDN : 19 avmSipSTUNServerPort : 20 avmSipDTMFMethod : 21 avmSipClirMethod : 22 avmSipUseDQOS : 23 avmSipClipNoScreening : 24 avmSipRouteOverInternet : 25 avmSipPtime : 26 avmSipPtimeAttribute : 27 avmSipRTCP-XRAttribute : 28 avmSipCallForwardingCfgType : 29 avmSipPAccessNetworkInfo : 30 avmSipNoPT2 : 31 avmSipEnable3XX : 32 avmSipFaxT38Version0 : 33 avmSipFaxT38ReinviteFromRemote : 34 avmSipFaxT38RejectWith488 : 35 avmSipCCBSenable : 36 avmSipUseRport : 37 avmSipUseSessionTimer : 38 avmSipIgnoreReceivedHeader : 39 avmSipUseMWI : 40 avmSipNATaware : 41 avmSipOnlyOneDialog : 42 avmSipRejectRefer : 43 avmSipINVITEwithoutRegistration : 44 avmSipPAssertedIdentityHeader : 45 avmSipPingEnabled : 46 avmSipPingInterval : 47

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

avmSip-3PTY-URI : 48 avmSipLocalSpeechDisable : 49 avmSipProfileIndex SYNTAX INTEGER (1..10) MAX-ACCESS not-accessible DESCRIPTION "Index used to order the SIP profiles." avmSipUseOKZ SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "always add OKZ, default yes" avmSipUseLKZ SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "always add LKZ, default yes" avmSipEmergencyRule SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "no OKZ in front of 110 +112, default yes" avmSipAKNRule SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "no OKZ in front of AKn, default yes" avmSipKeepLKZPrefix SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "keep LKZ prefix, default yes" avmSipKeepOKZPrefix SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "keep OKZ prefix default yes" avmSipGUIReadOnly SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "customer is not allow to change any settings" avmSipProtocolPrefer SYNTAX INTEGER (1..3) MAX-ACCESS read-write DESCRIPTION "What IP protocol to use (ipv4only(0), ipv6only(1), ipv4prefer(2), ipv6prefer(3))

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

avmSipRegistrar SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "FQDN or IP-Adress of registrar." avmSipOutboundProxy SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "FQDN or IP-Adress of proxy." avmSipOutboundProxyWithoutRouteHeader SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Don't add Route-Header for proxy" avmSipRegisterFetchUnsupported SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Registrar didn't support REGISTER fetch" avmSipRegistrationTTL SYNTAX INTEGER (120..604800) MAX-ACCESS read-write DESCRIPTION "Default 1800 secs." avmSipRegisterFailwait SYNTAX INTEGER (0..86400) MAX-ACCESS read-write DESCRIPTION "" avmSipRegisterFailwaitMax SYNTAX INTEGER (1..86400) MAX-ACCESS read-write DESCRIPTION "" avmSipSTUNServerFQDN SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "FQDN or IP-Adress of STUN server." avmSipSTUNServerPort SYNTAX INTEGER (1..65535) MAX-ACCESS read-write DESCRIPTION "Port of STUN server if not 3478." avmSipDTMFMethod SYNTAX INTEGER (1..3) MAX-ACCESS read-write DESCRIPTION "DTMF method (automatic(0), info-or-rtp-or-inband(1), rtp-or-inband(2), inband(3))"

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

avmSipClirMethod SYNTAX INTEGER (1..11) MAX-ACCESS read-write DESCRIPTION "CLIR method (none(0), displayname(1), display-and-username(2), aol(3), privacy(4), rfc3325(5), privacy-id(6), star31(7), star31star(8), toi(9), star31hash(10), star67star(11))" avmSipUseDQOS SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Use DQOS" avmSipClipNoScreening SYNTAX INTEGER (0..1) MAX-ACCESS read-write DESCRIPTION "Clip no screening method (off(0), asserted-identity(1))" avmSipRouteOverInternet SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "don't use voip/mta interface" avmSipPtime SYNTAX INTEGER (0..30) MAX-ACCESS read-write DESCRIPTION "TX packet size in ms." avmSipPtimeAttribute SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Use a=ptime:XX in SDP. See RFC4566." avmSipRTCP-XRAttribute SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Use a=rtcp-xr:voip-metrics." avmSipCallForwardingCfgType SYNTAX INTEGER (0..1) MAX-ACCESS read-write DESCRIPTION "standard(0), special(1)" avmSipPAccessNetworkInfo SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-write DESCRIPTION "Index used to order the SIP profiles." avmSipNoPT2 SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Don't offer G736-32 as payload 2."

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

avmSipEnable3XX SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Allow redirect with 3xx replies." avmSipFaxT38Version0 SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Try to use T38 for fax" avmSipFaxT38ReinviteFromRemote SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Let remote send reinvite for T38" avmSipFaxT38RejectWith488 SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Reject T38 with 488" avmSipCCBSenable SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Enable CCBS" avmSipUseRport SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Provider supports rport (RFC3581)" avmSipUseSessionTimer SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Provider supports Session Timer (RFC4028)" avmSipIgnoreReceivedHeader SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Don't get external ip adress from received header" avmSipUseMWI SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Provider supports MWI (RFC3482)" avmSipNATaware SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Provider is NAT aware"

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

avmSipOnlyOneDialog SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Only one call per number" avmSipRejectRefer SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Don't accept REFER" avmSipINVITEwithoutRegistration SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Send INVITE without even when not registered" avmSipPAssertedIdentityHeader SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Use P-Asserted-Identity Header" avmSipPingEnabled SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "Keep NAT-Mappings alive via SIP-ping" avmSipPingInterval SYNTAX INTEGER(10..3600) MAX-ACCESS read-write DESCRIPTION "Interval for SIP-ping" avmSip-3PTY-URI SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "IMS: URI for 3PTY" avmSipLocalSpeechDisable SYNTAX AVMBOOL MAX-ACCESS read-write DESCRIPTION "IMS: disable local speech"

v.0.7 HG 18/12/14 AVM GmbH, confidential Features subject to change

SIP UA settings avmSipUA SYNTAX SEQUENCE OF AvmSipUAEntry MAX-ACCESS not-accessible DESCRIPTION "Table for SIP UAs." avmSipUAEntry SYNTAX AvmSipUAEntry MAX-ACCESS read-only DESCRIPTION "Entries for SIP UAs." OID: 1.3.6.1.4.1.872.1.4.3.1.X avmSipUAIndex : 1 avmSipProfileReference : 2 avmSipUANumber : 3 avmSipUAUsername : 4 avmSipUAPassword : 5 avmSipUAIndex SYNTAX INTEGER (1..20) MAX-ACCESS not-accessible DESCRIPTION "Index used to order the SIP UAs." avmSipProfileReference SYNTAX INTEGER (1..20) MAX-ACCESS not-accessible DESCRIPTION "Reference to used profile" avmSipUANumber SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "Phone number" avmSipUAUsername SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "Username" avmSipUAPassword SYNTAX SnmpAdminString MAX-ACCESS read-write DESCRIPTION "Password"