· The Repico® GLP - Grip type coupling low pressure is designed to replace traditional pipe joining methods (welded, flanged, threaded etc.). · Sealing against 6 bar (87psi).. · Max. angular deflection 5°. · Completely made out of stainless steel 316. · Green PTFE coated bolts. · No special tools or skilled people are required to install the Repico® pipe couplings. · Light weight appr. 30% in comparison with flanged connections. · Quick to install (minutes). It requires limited space for installation, just a bit bigger than the pipe OD. · Connects different materials. No transition couplings required, allows pipe section replacement. · 60% noise reduction compared to rigid connections. Features: Product description: Repico® GLP - Grip type coupling low pressure (tensile / axial restraint) for gas, water and wastewater max. +40° C AVK's Repico® product program consists of stainless steel pipe couplings and repair clamps for pipe diameters from DN 15 up to DN 2000 depending on the Repico® type. These products are fully assembled and ready to install with only a torque wrench. They do not only guarantee a quick and simple assembly, but also offer an economical and sustainable solution. AVK Repico® pipe couplings absorbs noise and vibration, allow angular deflection and expansion/contraction (non restraint). Tensile / axial restraint, stainless steel 316, NBR AVK REPICO® - GRIP TYPE COUPLING LOW PRESSURE (GLP) 745/10-112 1/2 27-sep-2018 11:35 yvkr - The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range. COPYRIGHT©AVK GROUP 2018