0 Schweizerische Eidgenossensc Confëdëration suisse (_onfederazione Svizzera a ft Confederaziun svizra Swiss Confederation Federal Office of Civil Aviation FOCA -- Maintenance Training and Examination anisation Approval Certificate S 0 n na rf1-(E-a} -ü6)ät8/113ä-of the European Parliamentand of the Council and to Commission Regulatio®Hl}No432t72Öl4, for the time being in force and subject to the condËtion specified below, the Federal –Office of Civil Aviation of Switzerland hereby certifies Aviotrace Swiss SA CH-6850 Mendrisio,Via Rime 1 IT-00138 Roma, Via SalarËa851 IT-21013 Gallarate, Via Lazzaretto 12 IT-63076 Monteprandone (AP), Via dell'Artigianato V' traversa n' 1 as a maintenance training organisation in compliance with Section A of Annex IV (Part-147) of Regulation (EU) Na 1321/2014, approved to provide training and conduct examinations listed in the approval schedule attached and to issue related certificates of recognitionto students using the above references, CONDITIONS 1. This approval is limitedto what is specified in the scope of work section of the approved maintenance trainingorganisation exposition as referred to in Section A of Annex IV (Part-147); and 2. this approval requires compliance with the procedures specified in the approved maintenance trainingorganisation exposition: 3. thiM\ lattdw}ü1We approved maintenance training organisation remains in compliance with Annex IV (Part-147) of Regulation (EU) No 1321/20Tl;*an&__ Hubject to compliance with the foregolng ëÖhditiorts, this approval shall remain valid for an unlimitedduration unless the ®Dva+++a&Lreviously been surrendered, supersedëct„su_9pended or revoked HeRB=_ •HHÜ•n_ Date of original issue: of this revision: -iiö6:2al I" 13. 10.2020 Revision No Gianmario Giäëänelli. Director He7d’ of Safety DivisËoh-Aircraft bn- rä7;11nzenhauser, Head of Section ions Bern 1/3 _++-- EASA Form 11 issue 6
3
Embed
Aviotrace Swiss SAType/Tasks B1 T1 Airbus A318/A319/A320/A321 (CFM56) T1 Airbus A319/320/321 · (IAE PW11 OOG) T1 Airbus A319/A320/A321 (CFM LEAP-1A) T1 Airbus A319/A320/A321 (IAE
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
-- Maintenance Training and Examinationanisation Approval Certificate
S 0n na
rf1-(E-a} -ü6)ät8/113ä-of the European Parliament and of the Council and to CommissionRegulatio®Hl}No432t72Öl4, for the time being in force and subject to the condËtion specified below, theFederal –Office of Civil Aviation of Switzerland hereby certifies
Aviotrace Swiss SACH-6850 Mendrisio, Via Rime 1IT-00138 Roma, Via SalarËa 851IT-21013 Gallarate, Via Lazzaretto 12IT-63076 Monteprandone (AP), Via dell'Artigianato V' traversa n' 1
as a maintenance training organisation in compliance with Section A of Annex IV (Part-147) of Regulation (EU) Na1321/2014, approved to provide training and conduct examinations listed in the approval schedule attached and toissue related certificates of recognition to students using the above references,
CONDITIONS1. This approval is limited to what is specified in the scope of work section of the approved maintenance training organisation
exposition as referred to in Section A of Annex IV (Part-147); and2. this approval requires compliance with the procedures specified in the approved maintenance training organisation exposition:
3. thiM\ lattdw}ü1We approved maintenance training organisation remains in compliance with Annex IV (Part-147) ofRegulation (EU) No 1321/20Tl;*an&__
Hubject to compliance with the foregolng ëÖhditiorts, this approval shall remain valid for an unlimited duration unless the®Dva+++a&Lreviously been surrendered, supersedëct„su_9pended or revoked
Maintenance Training and Examination Organisation AppFdValScheM&-„-_______' _____
Reference CH.147.0014
Organisation name:
Date:
Aviotrace Swiss SA
13.10.2020
This approva1 schedule is limited to those trainings and examinations specified tn the scope of work section of theapproved maintenance training organisation exposition.
Maintenance Training Organisation Exposition reference: lssue 3 Revision 5
Date of original issue: 26.04.201 1Date of this revision: 08.10.2020 Revision No: lssue 3 Revision 5/08.10.2020
ity:'tea.at
o Giacomelli. DirectorHpäa of Safety Division Aircraft