Avionics Test Equipment Catalog - VIAVI Solutions...A portable unit designed for the testing of navigation instruments and communication systems. 4 VIAVI Avionics Test Equipment...

VIAVIAvionicsTest Equipment

PRODUCT CATALOG

VIAVIAvionicsTest Equipment

VIAVI avionics test equipment is used to support the development, manufacture, test and maintenance of commercial, private and military airborne electronic systems. Our innovative test solutions provide the critical data needed to ensure a safe flying environment, with the quality and performance you have come to expect from VIAVI.

Communication / Navigation / SurveillanceFlight Line Test SetsAVX-10K Flight Line Test Set ....................................... 4IFR4000 Nav/Comm Flight Line Test Set .............. 6IFR6000 Flight Line Test Set ....................................... 8IFR6015 Military Flight Line Test Set ..................... 10APM-424(V)5 MK XII/A Flight Line Test Set ........12ADS-B INTEGRITYTM Test App ...................................14Antenna Couplers ...........................................................16

Bench Test SetsATB-7300NG NAV Bench Test Set ...........................18IFF-45TS MK XIIA/TACAN Bench Test Set ...........20ATC-5000NG ATC/DME Test Set ............................. 22RGS-2000NG TCAS Test Set .....................................24

RF Automatic Test Equipment (ATE)IFF-7300S Series Automated Test System ...........26RF Expansion Module for ATEC® Series ATE ......28

GPS SimulatorsGPSG-1000 GPS/Galileo Portable Positional Simulator ...........................................................................30

Radio AltimetersALT-8000 FMCW/Pulse Radio Altimeter Flight Line Test Set ....................................................... 32ALT-8015 Military Pulse Radio Altimeter Flight Line Test Set .......................................................34ALT-9000 Radio Altimeter Test Set and Altitude Simulator ...........................................................................36

Fuel QuantityFuel Quantity Test Sets ...............................................38Fuel Interfaces................................................................ 40

SupportService Centers ...............................................................42CARE Support Plans .....................................................43

Table of Contents

4 VIAVI Avionics Test Equipment

AVX-10KThe Future of Flight Line Avionic System Testing

The AVX-10K from VIAVI is a comprehensive flight line test solution providing today’s Avionics Technician with an easy-to-use instrument for testing many required day-to-day testing needs.

From a quick airborne system auto-test to an in-depth troubleshooting tool, testing can conveniently be done in and around the aircraft using your mobile device and the VIAVI Mobile Tech App. Users can also access technical documentation and videos or implement workflow management with the Mobile Tech App.

The StrataSync online asset management and reporting tool assures your AVX-10K is up-to-date with the latest firmware, test capabilities, and provides access to test report data.

Communication / Navigation / SurveillanceFlight Line Test Sets

Performance testing of Communication/Navigation/Surveillance airborne systems.

5viavisolutions.com

Communication / Navigation / SurveillanceFlight Line Test Sets

Features

y Communication

- AM/FM/SELCAL

y Navigation

- VOR/DME/ILS

y Surveillance

- XPDR/ADS-B/UAT/TCAS

y Test Tools

- VSWR/DTF

y Mobile Tech App

y StrataSync

y Built in GPS Receiver

Benefits

y Comprehensive, configurable test solution

y ADS-B/ADS-R/TIS-B Traffic and ELT

y Troubleshooting and fault location

y Remote testing in and around the aircraft

y Technical and supporting documentation at your fingertips

y Android™ and iOS® compatible

y Asset and report management

y Accurate testing of ADS-B positional data

A portable unit designed for the testing of navigation instruments and communication systems.


IFR4000Nav/Comm Flight Line Test Set

The VIAVI IFR4000 Flight Line Test Set is designed for testing ILS, VOR, Marker Beacon, HF/VHF/UHF Communications (NAV/COMM) Systems, and ELT Short Range Emergency Beacons and 406 MHz COSPAS/SARSAT Long Range Emergency Beacons. The menu-driven functionality and guided test capability make this instrument extremely easy to use.

7viavisolutions.com

Features y Morse code provides 1-4 characters transmitted in the VOR and ILS localizer mode

y Generation of ARINC 596 Selective Calling Tones

y Simulation of Localizer and Glideslope (CAT I, II, and III) Signals with variable DDM settings

y Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)

y Simulation of marker beacon, selectable outer, middle, and inner marker tones

Benefits y Battery operation 8 hours plus y Guided test capability reduces total test time y Low cost ELT option y Software updates downloaded via website y Frequency counter provides external frequency

Applications y Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone

y Accurate measurement of 406 MHz COSPAS/ SARSAT emergency beacon transmitter frequency and output power

y Decode and display all location and user protocols


IFR6000Flight Line Test Set

The VIAVI IFR6000 is the industry standard flight line test set that allows for fast, reliable, and functional testing of installed avionics systems. Referenced in many OEM manuals and supported with procedures, the IFR6000 provides the operator with the confidence necessary for performance testing.

Test modes A/C/S, 1090 MHz ADS-B and 978 MHz UAT, TCAS I & II, and DME.

9viavisolutions.com

Features

y Transponder Auto Test (DO-181E)

y Automated ADS-B performance testing and reporting

y Monitor and decode

– ADS-B (DO-260A/B)

– AC 20-165B surface/air auto test

– UAT

y Target generator

– ADS-B 1090 MHz (DO-260A/B surface and air)

– UAT 978 MHz (ADS-B, TIS-B, FIS-B)

y Comprehensive GICB test

y DME ground station simulation

y UUT parametric tests

y User programmable TCAS scenarios

y Altitude encoder

y Over-the-air, direct, or coupled testing

y Battery operation six hours plus

Benefits

y Provides a full FAR Part 43, Appendix F test

y Verification of ADS-B/UAT installed systems

y Avoid ATC interference with optional coupler

y Data dump of transponder test results to PC

y Software updates available via website


IFR6015Military Flight Line Test Set

The VIAVI IFR6015 is a user friendly flight line test set that allows for fast, reliable, and functional testing of military transponder, TCAS and TACAN installed systems. Referenced in many OEM manuals and supported with procedures, the IFR6015 provides the operator with the confidence necessary for system performance testing.

Test Transponder Modes 1, 2, 3/A, C, and S, DME, TCAS I & II, ADS-B UAT, TIS I, Military E-TCAS and TACAN Avionics Systems.

EXPORT CONTROL: This product is subject to the Export Administration Regulation (EAR) 15 CFR 730-774, and may not be exported, re-exported, or otherwise transferred to a foreign person or outside the United States without authorization from the U.S. Department of Commerce.

11viavisolutions.com

Features

y IFF Modes 1 & 2

y TACAN/DME interrogator testing

y Military E-TCAS

y Transponder Auto Test (DO-181E)

y Automated ADS-B AC 20-165B surface/air performance testing

y ADS-B (Out) monitor and decode

y ADS-B (In) target generation

y UUT parametric tests

y User programmable TCAS scenarios

y Altitude encoder

y Over-the-air, direct, or coupled testing

y Battery operation six hours plus

Benefits

y TACAN ground station simulation

y Legacy TACAN test set emulation

y Provides a full FAR Part 43, Appendix F test

y Verify ADS-B /UAT installed systems

y With the optional antenna coupler, avoid ATC interference and the need for frequency allocation approval (DD 1494)

y Performs TACAN/DME testing Ground-to-Air (G/A), Air-to-Air (A/A)

y Simulate ATCRBS or Mode S intruders for TCAS testing


APM-424(V)5MK XIIA Flight Line Test Set

The VIAVI APM-424(V)5 easily accommodates a variety of aircraft, ground, and ship platforms to test transponder and interrogator performance. The APM-424(V)5 is a Mode 5 and ADS-B performance and capability upgrade to the TS-4530 and APM-424 legacy test sets. The unit closely replicates legacy operation for utilization of existing procedures, making the APM-424(V)5 a cost effective, highly accurate upgrade to fielded test sets.

Simple verification of mission critical Mode 5 IFF systems.

EXPORT CONTROL AND WARNING: VIAVI Solutions military products are controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States. This product may not be sold or proposed or offered for sale to certain countries including: Belarus, Burma, China, Cuba, Haiti, Iran, Liberia, Libya, North Korea, Somalia, Syria, Sudan, and Vietnam. See ITAR 126.1 for complete information.


Features

y DoD AIMS certified

y Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77, and SIT-2010 crypto appliqués

y Transponder Test Modes 1, 2, 3/A, C, S (EHS/ELS), 4, Mode 5 (Level 1 and 2)

y Interrogator Test Modes 1, 2, 3/A, C, S, 4, Mode 5, TCAS, ETCAS (Level 1 and 2)

y DO-260B compliant; ADS-B Out test capability

y Supports testing with antenna couplers

y Remote Interface Program allows testing from a PC

Benefits

y Time may be acquired via the embedded GPS receiver, pulled from the crypto or set manually.

y Hand-held and battery powered

y Self-diagnostic, point and shoot Go/ No-Go operation

y Parametric test results can be stored for downloading to a PC for review or maintenance logging

Applications

y Mode 5 TX/RX pulse measurement

y Mode 5 squitter data

y Mode 5 data acquisition formats 0-23

y Includes the TS-4542 shipboard interrogator test capability

y ADS-B Out testing

y KIV-77 & SIT-2010 and KIV-78 support


ADS-B INTEGRITYTM ADS-B Out Performance Test Application

The ADS-B INTEGRITY™ software application, supports Supplemental Type Certification (STC) and post approval testing for ADS-B Out equipment installations. For accuracy and integrity performance test, the software controls the VIAVI IFR6000 or IFR6015 Transponder Test Set. An additional positional accuracy test is accomplished with the VIAVI GPSG-1000 Positional Simulator.

For R&D requirements, the application will control the IFF-45TS/A MK XII/A Bench Test Set and the GPSG-1000 for ADS-B Out performance.

A complete detailed ADS-B Out compliance report in FAA format is generated showing Pass/Fail criteria.

A time-saving tool for performance testing of ADS-B Out systems.


Benefits

y ADS-B equipment installation verification

y Complete AC 20-165B fast and convenient reporting to identify installation issues

y Eliminate post STC operational flights

y Coupled testing in the hangar or on the flight line eliminates:

– Open sky requirements – GPS repeater – Weather issues – Interference with ATC operations

y Comprehensive solution for accurate system latency measurements

y Ability to measure latency and associated errors over a variety of simulated velocities and positions

y Cross check verification of transponder configuration

y Save time and money

Applications

y Performance verification of: – ADS-B Transponders – UAT Transceivers – GPS receivers

Accurate, repeatable test results while reducing interference with air traffic control operations.


Antenna Couplers

VIAVI couplers solve the problem of reliable FAR, Part 43, Appendix ‘F’ ERP (Effective Radiated Power) and transponder MTL (Minimum Trigger Level) testing, in multi-path environments.

Provides >20 dB of attenuation to minimize false targets for ATC, TCAS or ADS-B In equipped aircraft.

For the military, use of our couplers also eliminate the need for DD-1494 frequency authorization.

Our couplers securely mount directly over the aircraft transponder antenna(s) allowing for shielded testing of the complete system, while connected to any of the VIAVI transponder or TCAS test sets: AVX-10K, IFR6000/6015, APM-424, ATC-5000NG, or the IFF-45TS.



Features

y Reliable effective radiated power and minimum trigger level testing

y Allows for testing in a high multi-path environment

y Provides >20 dB of isolation

y Single and dual antenna kit configuration

y Rugged design for ramp use

Benefits

y Effective ADS-B performance testing in the airborne condition

y Reduces false intruders and interference with air traffic control

y Reduces issues reported by FAA’s SAFO 17002

y High level of measurement repeatability is achieved, saving test time

y Universal design allows coupler to be used with any suitable transponder test set

y Eliminate DD-1494 requirements

Model Part Number

UC-584 Coupler Kit 112350 (single antenna)112349 (dual antenna, includes UC-584S top mount coupler)

F-15 IFF Coupler Kit 113532 (ITAR controlled)

F-16 IFF Coupler Kit 140600 (ITAR controlled)

GC-130 GPS Coupler Kit 141193

TC-201A TCAS/ Transponder Coupler

140889

Antenna couplers available:


ATB-7300NGAvionics NAV Bench Test Set

The ATB platform is a powerful leading edge design tailored for end-users from OEMs to repair shops and can be used for all stages of the avionics life cycle: Product development; Design verification & validation; Certification; Manufacturing; Return-to-service; and Service / calibration.

The ATB-7300NG Navigation Test Set is based on the new VIAVI AXIe Avionics Test Bench (ATB) platform.

Communication / Navigation / SurveillanceBench Test Sets


FeaturesVHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequencesILS/LOC Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse codeILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDMVOR Generator - Provides control of 30 Hz Var/Ref and 9960 Hz tone frequencies, modulation depths, 9960 Hz deviation, VOR bearing, to/from and IDENT settingsADF Generator - Provides control of modulation frequency, modulation depth and IDENT settingsMarker/Beacon Generator - Provides selection of Outer, Middle and Inner marker beacon tones and control of tone frequencies, modulation depth and IDENT settingsUser Interface y Basic Graphical User Interface (GUI) allows access to test features

y The ATB offers an Ethernet remote control interface

y Commands set compatibility offered for the following legacy products:

- NAV-2000R - Collins 479S-6A

- ATB-7300

Communication / Navigation / SurveillanceBench Test Sets

A leading edge RF signal generator/receiver designed for engineering, manufacturing and return-to-service applications.


IFF-45TS MK XIIA/TACAN Bench Test Set

The IFF-45TS test set provides RF signal generation and parametric measurement of MK XIIA and TACAN equipment. Replies and interrogations can be individually configured to support testing requirements. ADS-B Out testing monitors ADS-B, TIS-B, ADS-R and Acquisition squitters. The IFF-45TS emulates either a TACAN ground transponder or a TACAN airborne interrogator, providing six TACAN test modes.



Features

y DoD AIMS certified

y Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77 & SIT-2010 crypto appliqués

y Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators

y Separate connections for direct or over-the-air testing

y Software defined radio design allows waveform flexibility and future growth potential

y Dual signal generator design allows coordinated signal production for interference and echo testing

Applications

y Engineering – Development and qualification testing for MK XIIA, ADS-B Beacon, and TACAN equipment

y Manufacturing - factory calibration and verification testing

y Depot/Service - Level 1 and 2 return-to-service testing

y Support for DO-260B, AIMS 03-1000, and DO-181E certification testing

y Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators

y Industry-wide use for development and end item testing of transponders and interrogators


ATC-5000NGATC/DME Test Set and ADS-B Target Generator

The VIAVI ATC-5000NG is an RF signal generator/receiver for testing Mode 3/A, C and S transponders. The ATC-5000NG was designed with modern software defined radio technology and is the replacement product for the commercial functionality of the SDX-2000, ATC-1400A and S-1403DL. The ATC-5000NG is capable of performing most MOPS tests for DO-181E, DO-260, DO-260A, DO-260B, and DO-282B and is the ideal test equipment for engineering development, certification, manufacturing and service.

The ATC-5000NG tests the following: y Transponders (Mode S/ADS-B Out) y ADS-B In receivers y UAT receivers y 1090MHz DF18 emitters (surface vehicles) y ADS-B In ground station receivers y ADS-R, TIS-B ground station transmitters y DMEs

Prepare for Global ATC Modernization with NextGen test technology.


Features

y Target generation - independently configure up to 600 ADS-B, TIS-B, or ADS-R target types (32 dynamic and 568 static); ATCNGOPT03 Multi-receiver option required

y Software-driven design allows for field updates to add new features, capabilities or modifications

y ADS-B squitter decode and logging for ADS-B Out testing (DO-260, DO-260A and DO-260B data parsing)

y DO-260B MOPS preconfigured tests available (Option ATCNGOPT06)

y Generates ATCRBS/Mode S interrogations

y Multi-receiver test capability (ATCNGOPT03)

y UAT TX/RX capability (ATCNGOPT02)

y Pulse and frequency measurement

y Remote controlled via GPIB or Ethernet

y Two independent transmitters and receivers

y TX/RX data logging capability

y Legacy command set option

y Full diversity testing capability

Benefits

y Internal pulse measurement capability eliminates need for oscilloscope

y Support for Air Traffic Control Modernization mandates (NextGen, SESAR)

y Modern architecture design will support future standards changes


RGS-2000NGTCAS Test Set and ADS-B Target Generator

The RGS-2000NG TCAS Test Set is an RF signal generator/receiver for testing Traffic Alert and Collision Avoidance Systems (TCAS) with an option available for testing transponder LRUs. The RGS-2000NG was designed with modern software-driven digital modulation technology and is the RGS-2000 replacement for engineering development, design validation, manufacturing and return-to-service testing.

Equipment tested includes TCAS computers, ADS-B In receivers (including ground station), ADS-R and TIS-B ground station transmitters, and Mode S/ADS-B Out transponders (with transponder option, RGSNGOPT10).

The premier test solution for development, certification, test and repair of Traffic Collision Avoidance Systems (TCAS) and transponders.


Features

y Target generation - independently configure up to 600 TCAS, ADS-B, TIS-B, or ADS-R target types (32 dynamic and 568 static)

y Software-driven design allows for field updates to add new features, capability or modifications due to industry changes


y ADS-B squitter encode/decode

y DO-260, DO-260A and DO-260B data parsing

y Pulse and frequency measurement


y Full diversity testing capability

Benefits

y Replacement for the legacy RGS-2000

y Modern architecture design will support NextGen mandates and future standards changes

Applications

y Engineering development, certification, manufacturing and service

y Capable of performing most MOPS tests for DO-185A, DO-185B, DO-260, DO-260A, DO-260B, DO-181E and DO-300

A powerful computer based system designed for the test and diagnosis of military avionics, including IFF transponders, interrogators, cryptos, and TACAN transceivers.


IFF-7300S SeriesIFF/Crypto/TACAN Automated Test System

RF Automatic Test Equipment


The IFF-7300S Series can be configured for purchase in a number of ways: y Test IFF Mode 4 or Mode 5 UUTs and TACAN receiver-transmitters (IFF-7300S-01/02/03/04)

y Configure with two RF signal generator/receivers (VIAVI IFF-45TS) for dedicated cryptographic appliqué testing (IFF-7300S-50)


RF Automatic Test Equipment

Aircraft emulation and test setupThe IFF-7300S contains all required resources and emulates all necessary signals that the aircraft exerts on the unit under test (UUT).

y No need for an external power supply

y The radio is completely set up and ready for full testing

Test modes y Automated return-to-service testing (Level 1)

y Automated module level diagnostics (Level 2)

y Manual mode testing using the VIAVI proprietary Virtual Panel application software.

Individual Test Program Sets (TPSs) are available for each LRU. The IFF-7300S system is expandable. To add test capability, simply buy additional TPSs.

Automated testing per OEM procedures y Significant time is saved over manual testing

y Automated “test scripts” eliminate possibility of inconsistent testing

y Test reports are automatically stored electronically for future reference

y Traceability of results available for audits

The RF Expansion Module (RFEM) is specifically designed to support testing of airborne RF components on the ATEC® Series ATE. Developed and manufactured by VIAVI Solutions in partnership with SPHEREA Test & Services, the RFEM provides a convenient platform that is compatible with new and existing ATEC® Series ATE systems.


RF Expansion Modulefor Spherea ATEC® Series ATE

A library of TPS solutions has been developed by VIAVI that will test the full range of navigation, communication, TCAS, transponder, and other RF systems. The product strategy has full OEM support and CMM listing.

The RF instrumentation package includes PXI format synthetic instrument modules and the VIAVI NextGen bench test equipment.


Key Customer Advantages

y VIAVI designed RF test system, fully integrated into the ATEC® Series ATE

y Simple Ethernet interface between RFEM and ATEC® Series ATE, permits easy retrofit to existing ATE installations

y Powerful test executive interface offers many advantages to the test operator

y Global service and support provided jointly by SPHEREA Test & Services and VIAVI Solutions

y Extensive CMM-listed TPS library developed to test Nav, Comm, TCAS, Transponder, GPS, and other RF systems

y Complete RFEM and TPS information can be found on the SPHEREA Customer Support and Services MySpherea Internet web site

Complete RFEM and TPS information can be obtained from the Spherea Test & Services web site or the VIAVI web site at viavisolutions.com

An economical simulator with high-end test capability, ideal for validating the performance of GPS enabled devices.


GPSG-1000 GPS/Galileo Portable Positional Simulator

The VIAVI GPSG-1000 is a software upgradable, single carrier, multi-channel simulator. This versatile, time-saving test set is designed for GPS/Galileo receivers, including WAAS/EGNOS SBAS (satellite based augmentation systems) simulation.

The GPSG-1000 provides 3D positional simulation and allows any combination of visible SV’s to be selected. One or two channels may be allocated to SBAS simulation.

GPS Simulators


GPS Simulators

Features

y GPS signals simulated

- L1, L1C, L2C, L5

y Galileo signals simulated

- E1, E5, E5a, E5b

y Static and dynamic simulations

y NMEA-0183 File Record and Playback functionality

y 12 channel configuration (RAIM supported)

y Programmable space vehicle (SV) parametrics and health

y User or built-in GPS receiver referenced time and date

y Remote control interface via Ethernet

Benefits

y Simultaneous GPS/Galileo simulation

y Software/firmware upgradeable

y PVT (position, velocity, time) data available via RS-232

Applications

y General testing of civil GPS and Galileo receivers

y Testing of non-encrypted military GPS receivers

y TAWS / WAAS / GBAS / LPV / ADS-B

y Allows sensitivity testing of the GPS System

Versatile, time-saving, portable test set for testing installed FMCW and pulse radio altimeters.


ALT-8000FMCW/Pulse Radio Altimeter Flight Line Test Set

The VIAVI ALT-8000 is the world’s first and only RF-based portable radio altimeter flight line test set. The ALT-8000 tests from the TX/RX antennas to the indicator in the cockpit, allowing the operator to replicate in-flight conditions and isolate a bad component of the installed system.

Radio Altimeters


Features

y Remote control interface (Ethernet)

y Direct-connect to UUT T/R or to installed system via antenna couplers

y Programmable multi-leg climb/ descend profiles

y Software updates downloaded via website

y Parametric measurements of TX power / frequency / pulse width / FM deviation / PRF

Benefits

y Battery operation of four hours plus between recharges

y Test pulse radio altimeters (non-pulse compression type)

y Create profiles to control dynamic altitude simulations

y Test FMCW radio altimeters including analog

y Radio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified

Applications

y Terrain Awareness Warning System (TAWS) installation

y Simulate a complete landing approach, including a flare out

y Simulate a take-off and departure

y Replicate actual airborne conditions

y See ALT-8000 supported RADALT Equipment List for a complete, up-to-date list

Radio Altimeters


ALT-8015FMCW/Military Pulse Radio Altimeter Flight Line Test Set

The VIAVI ALT-8015 is the world’s first and only RF-based portable radio altimeter flight line test set. The ALT-8015, designed for military applications, tests from the TX/RX antennas to the indicator in the cockpit, allowing the operator to replicate in-flight conditions and isolate a bad component of the installed system.

Versatile, time-saving, portable test set for testing installed FMCW and military pulse radio altimeters.

EXPORT CONTROL: This product is subject to the Export Administration Regulation (EAR) 15 CFR 730-774, and may not be exported, re-exported, or otherwise transferred to a foreign person or outside the United States without authorization from the U.S. Department of Commerce.


Features

y Tests military pulse radio altimeters: Including AN/APM-171 (V), AN/APN-194(V) and AN/APN-209(V)

y Tests FMCW radio altimeters including CDF types

y Direct-connect to UUT T/R or to installed system via antenna couplers

y Fast detector for tracking LPI radio altimeters with TX power management

y Software upgradeable

y Parametric measurements of TX power / frequency / pulse width / FM deviation / PRF

y Remote control interface (Ethernet)

Benefits

y Perform a complete system test, allowing the operator to replicate in-flight conditions and isolate a bad component of the installed system

y Create profiles to control dynamic altitude simulations

y Radio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified

Applications

y Terrain Awareness Warning System (TAWS) installations

y Simulate a complete landing approach, including a flare out

y Simulate a takeoff and departure

y Replicate actual airborne conditions


ALT-9000Radio Altimeter Test Set and Altitude Simulator

The ALT-9000 provides altitude simulations with true RF time delay and path loss models to test any format of radio altimeter system including Low Probability of Intercept (LPI), Combined Altitude Radar Altimeter (CARA) & Next Generation variants.

Quickly test or troubleshoot all types of installed radio altimeter test systems.


Features

y RF/Fiber optic delay line based test set supports all formats of radio altimeters

y Portable ruggedized enclosure for flight line or benchtop use

y Over 4 hours of battery operation

y Simulates static altitudes from 0* ft. to 10,000 ft. in 10 ft. steps (*minimum simulated altitude dependent upon AID and test cable length)

y +20 dB of power level offset from nominal loop loss value

y Touch-screen operation or remote control interface

y Direct-connect to UUT T/R or installed system via antenna couplers

Convenient Touch Screen Controls

y TX Power

y TX Frequency*

y FM Deviation*

y Sweep Rate*

y Pulse Width*

y PRF*

y Optional VSWR and cable loss measurements

* Dependent on LRU technology


Proven performance for safe and accurate testing of critical fuel quantity systems.

Fuel Quantity Test Sets

VIAVI fuel quantity test sets will accurately test or troubleshoot any AC or DC capacitive fuel, water, LOX or Engine Oil system when used with VIAVI aircraft specific interface cables/units.

Fuel Quantity


Features

y Measures/simulates capacitance

y Measures voltage

y Meggar test for troubleshooting

y Supported with aircraft specific procedures

y Easy to operate

y Lightweight and portable

y Rechargeable battery

y Self-test

Test sets available and systems tested:

Fuel Quantity

System Commercial Military

PSD60-2R AC üPSD30-2AF DC ü üPSD60-1AF AC üPSD90-1C AC/DC ü ü

Note: Aircraft-specific interface cables are required and can be purchased separately. Contact VIAVI for your application.

VIAVI has a large selection of aircraft-specific interface cables supporting many rotary and fixed wing aircraft.

Note: Aircraft-specific interface cables are required and must be purchased separately. Contact VIAVI for your application.


Fuel Interfaces

VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system. If you are unable to find your aircraft listed here, we also offer design services for the development of new interfaces and aircraft test procedures.

Features

y Interface with the VIAVI Fuel Quantity Test Set(s)

y Provide FQIS interface at various points on the aircraft for complete testing

y Provide interface to probes (tank units), wiring harnesses, indicators, signal conditioners, etc.

y Provide level sensor and/or thermistor testing

y Provide densitometer and compensator testing



Service Centers

Take advantage of VIAVI Solutions authorized service center locations around the world:

Factory (OEM) calibration and repair

Customer equipment will be updated with latest software and/or required hardware modifications, at time of service.

Fast response time

Our centers maintain inventory on components and replacement modules for the quickest possible turn times.

Support

Our highly qualified service engineers are supported by factory OEM engineers.

Warranty

Our customers can have confidence that the work performed is backed with a service warranty.

Support

Plan Objective Technical Assistance

Factory Repair

Priority Service

Self-paced Training

5 Year Battery and Bag Coverage

Factory Calibration

Accessory Coverage

Express Loaner

ManufacturerWarranty

Repair/Manufacturer

DefectsStandard Plus

BronzeCare

Technician Efficiency Premium

Maintenance & Measurement

AccuracyPremium

SilverCare

*

MaxCare

High Availability Premium *

*5-year plans only


Support

Quality

Be assured that only OEM approved components are used, increasing the life of your equipment and maintaining the performance, to test critical airborne systems.

For the most up-to-date list of service center locations visit viavisolutions.com/maintenance.

Care Support Plans

VIAVI Care Support Plans streamline the start-up learning phase, as well as repair, calibration and loaner processes.*

How much is your time worth when there are always too many problems to solve? We help your team maximize productivity with support and maintenance services! Great service is a critical part of your VIAVI experience. Care Support Plans provide priority service at a low, fixed cost with exclusive benefits.

Plan Objective Technical Assistance

Factory Repair

Priority Service

Self-paced Training

5 Year Battery and Bag Coverage

Factory Calibration

Accessory Coverage

Express Loaner

ManufacturerWarranty

Repair/Manufacturer

DefectsStandard Plus

BronzeCare

Technician Efficiency Premium

Maintenance & Measurement

AccuracyPremium

SilverCare

*

MaxCare

High Availability Premium *

*5-year plans only

*Check for availability.

23

© 2021 VIAVI Solutions Inc. Product specifications and descriptions in this document are subject to change without notice.

Patented as described at viavisolutions.com/patents

viavisolutions.com

avionicstestequipment-ct-avi-nse-ae 30187568 907 0621

Contact us +1 800 835 2352

[email protected]

To find the VIAVI office nearest you, visit viavisolutions.com/contact

Avionics Test Equipment Catalog - VIAVI Solutions...A portable unit designed for the testing of navigation instruments and communication systems. 4 VIAVI Avionics Test Equipment...

Documents