availon_flyer_permanent_lubrication_en_2

The permanent lubrication systems for GE® 1.5 MW turbines.

Grease in all the right places.

Small solutions with great effect.

Overview of benefi ts:

• Improved reliability due to a permanent,

constant supply of lubricant

• Permanent, constant lubricating fi lm

• Prevention of excess lubrication

• Better protection against corrosion and wear

• Reduction of required maintenance and repair

• Grease cartridges only need to be changed once

a year

It only makes sense to develop upgrades if they specifi cally increase the performance of your WTGs or reduce operating costs. And this is precisely what we are able to achieve as a result of our practical experience and the WTG know-how of our service technicians and engineers. We are delighted to be able to off er you further benefi ts with our upgrades. But fi rst, here is a list of benefi ts of our permanent lubrication systems.

Practise of the old days? Manual lubrication of the yaw system by a service engineer.

W E L I S T E N .

24/7 customer Service.

For further information on our range of services, see www.availon.eu or contact us by email or by phone.

www.availon.eu

[email protected]

Information in Germany: +49 (0) 5971 8025-0Information in Italy: +39 06 64821977Information in Spain: +34 (0) 91 7812640

Technical advice: +49 (0) 5971 8025-250

Whether it is open gears, planetary gears, or roller bearings – the moveable, mechanical components of your WTG do most of the work to ensure a high energy yield.One more reason to look after them using the latest technology and optimum continuity.

Where manual lubrication reaches its natural limit, the eff ectiveness of our permanent lubrication systems commences. Perfectly even lubricating fi lm – and thus the prevention of excess lubrication – is something that cannot be achieved even by the most experienced engineer. But it is precisely these two advantages that positively aff ect corrosion protection, wear, and thus operating effi ciency.

Increase reliability, decrease required maintenance.The automatic and permanently reliable supply of lubricant to components increases the operational reliability of your WTG. At the same time, our permanent lubrication systems reduce the work required during regular maintenance. Only the grease car tridges have to be replaced once a year – ideally in four places in your WTG because our system has been developed precisely for four areas:

Main bearing | Generator bearing | Yaw gear ring | Pitch gear ring

The illustration on the left shows the automatic pitch-gear lubrication. A polyurethane pinion supplies the drive gear with a thin, constant lubricating fi lm. Manual lubrication is a thing of the past.

Everything to ensure smooth operation: four systems for better efficiency.

The above illustration shows our permanent lubrication for generator bearings. A battery-operated mechanical system

injects the grease under pressure into the respective bearing.

The permanent lubrication systems for GE® 1.5 MW turbines.

Grease in all the right places.

Small solutions with great effect.

Overview of benefi ts:

• Improved reliability due to a permanent,

constant supply of lubricant

• Permanent, constant lubricating fi lm

• Prevention of excess lubrication

• Better protection against corrosion and wear

• Reduction of required maintenance and repair

• Grease cartridges only need to be changed once

a year

It only makes sense to develop upgrades if they specifi cally increase the performance of your WTGs or reduce operating costs. And this is precisely what we are able to achieve as a result of our practical experience and the WTG know-how of our service technicians and engineers. We are delighted to be able to off er you further benefi ts with our upgrades. But fi rst, here is a list of benefi ts of our permanent lubrication systems.

Practise of the old days? Manual lubrication of the yaw system by a service engineer.

W E L I S T E N .

24/7 customer Service.

For further information on our range of services, see www.availon.eu or contact us by email or by phone.

www.availon.eu

[email protected]

Information in Germany: +49 (0) 5971 8025-0Information in Italy: +39 06 64821977Information in Spain: +34 (0) 91 7812640

Technical advice: +49 (0) 5971 8025-250