A Hilco Global Company Vested in Your Success 31555 West Fourteen Mile Road, Suite 301 Farmington Hills, Michigan 48334 USA Ph 248-254-9999 • Fx 248-254-9995 www.hilcoind.com AVAILABLE IMMEDIATELY Littlefield, Texas High Quality Denim Fabric Production Facility with Equipment as New as 2013
10
Embed
AVAILABLE IMMEDIATELY - Microsoft · Frame Equipped with Automatic Bobbin Load and Off, Ring Frame Linked to Savio Orion E Automatic Bobbin Winders, S/Ns 370.045.99 381.013.99 (New
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
A Hilco Global CompanyVested in Your Success
31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995
www.hilcoind.com
AVAILABLE IMMEDIATELY
Littlefield, Texas
High Quality DenimFabric Production
Facility with Equipmentas New as 2013
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2
Visit Our Website for Complete Lot Catalog www.hilcoind.com/ACG
For more information, please visit us on the web at www.hilcoind.com/ACG 3
OPEN END & RING SPINNING FRAMES
(3) AVAILABLESPINNING EQUIPMENT
3 – SCHLAFHORST MODEL AUTOCORO 8 OPEN END SPINNING FRAMES, S/Ns 161-0212-0093, 161-0212-0097, 161-0212-0103 (All 2012), 480-Positions,Spinbox SE20, Digi Piecing, (4) Automatic Packaging / Doffing Units, TubeMagazine, Corolab XQ Sensor System, Equipped with MultiLot 5 and Fancynation(Add Ons)
3 – MARZOLI MODEL FILATOIO NSF4 RING SPINNING FRAMES, S/Ns 2133, 2132,N/A (All 1998), 1,296 Spindles, Frame Retrofitted with Pinter Slubbing Unit (New2012), with Multi Count and Twist Adjustment Capability, Pinter Filament / Detector(New (2013), Frame Equipped with Automatic Bobbin Load and Off, Ring FrameLinked to Savio Orion E Automatic Bobbin Winders, S/N 371.04499 (New 2000), 33-Position Winder, Equipped with Uster Quantum Clearers and Auto Doffer, JacobiOverhead Clearer
1 – MARZOLI MODEL FILATOIO RST1 RING SPINNING FRAME, S/N 14 (2000),1,200 Spindles, Frame Retrofitted with Marzoli Slubbing Unit (New 2013), with MultiCount and Twist Adjustment Capability, Frame Equipped with Automatic Bobbin Loadand Off, Ring Frame Linked to Savio Orion E Automatic Bobbin Winders (New 2000),S/N 381.012.99, 33-Position Winder, Equipped with Uster Quantum Clearers andAuto Doffer, Jacobi Overhead Clearer
2 – MARZOLI MODEL FILATOIO RST1 RING SPINNING FRAMES, S/Ns 15, 16 (Both2000), 1,200 Spindles, Frame Retrofitted with Pinter Slubbing Unit (New 2012), withMulti Count and Twist Adjustment Capability, Pinter Filament / Detector (New (2013),Frame Equipped with Automatic Bobbin Load and Off, Ring Frame Linked to SavioOrion E Automatic Bobbin Winders, S/Ns 370.045.99 381.013.99 (New 2000), 33-Position Winder, Equipped with Uster Quantum Clearers and Auto Doffer, JacobiOverhead Clearer
ROVING FRAMES • INDIGO DYE RANGE
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4
ROVING EQUIPMENT2 – MARZOLI MODEL BANCO FT1D ROVING FRAMES,
S/Ns 20, 19 (Both 2000), 84-Spindles, 7 x 16Packages, PK 1500 Drafting, Electric Eye Stop Motion,Jacobi Overhead Cleaner and UTIT Linked BobbinTransport System
1 – MARZOLI MODEL FT1D ROVING FRAME, S/N 1(1999), 120-Spindles, 7 x 16 Packages, PK 1500Drafting, Electric Eye Stop Motion, Jacobi OverheadCleaner and Linked Bobbin Transport System
BLENDING LINES, Each Consisting of: Rieter ModelUnifloc A10, Blendomat Fiber Bale Picker, S/N N/A(Est.1990), 180° Swivel Tower, 1.6 Meter Arm, (40)Bale Lay Down, Including Line Controls, HumpMagnet, 12" Dia. Fiber Transport Piping andTransport Fans. *Hergeth Model Reserve Chute, 60"Fiber Reserve Chute Machine, (Est. 1980's),Consisting of: 5-HP Transport Fan (Suspended),Fiber Controls 60" Fiber Condenser, with SuctionFan, Floor Mounted 5-P Transport Fan (Exit), RieterModel Uniclean B1, Fiber Opener and Cleaner, S/N N/A (New 1993), with Machine Controls, FiberTransport Fan and Waste Suction Fan *Rieter ModelAeromixer, Fiber Mixer.Blending/Reserve Unit, S/NN/A (Est. 1980's), with (3) Fiber Transport Fan, (2) Rieter Model ERM B5/5, Mono Cylinder CourseFiber Openers, S/N N/A (New 1988), with (2) FiberTransport Fans and (2) Waste Suction Fans, (2) Rieter Model Uniflex B50, Mono Cylinder FineCleaners, (New 1995), with Fiber Transport Fans andWaste Suction Fans, Including Line SupportEquipment: Rieter Line Controls, Argus FireSupression System, Argus Metal Detector
54405-041-1-7, NA6 (1976), with 15-HP Motor, Reed Stand, MagazineCreel, 468 Live Ends, Double Sided Creel, (39) Posts Per Side, (6) Positions Per Post, 11" Vertical Spacing, 13" Horizontal Spacing,Appalachian Electronic Tensioner, Electronic Stop Motion, OverheadCleaner
2 – REED CHATWOOD BALL WARPERS, S/N 119-56770-1989 (1989), with15-HP Motor, Reed Stand, Magazine Creel, 378 Live Ends, Double SidedCreel, (32) Posts Per Side, (6) Positions Per Post, 11" Vertical Spacing,13" Horizontal Spacing, Appalachian Electronic Tensioner, Electronic StopMotion, Overhead Cleaner
1 – WEST POINT BALL WARPER, S/N 25009 (2000), with 10-HP Motor,Reed Stand, Magazine Creel, 502 Live Ends, Double Sided Creel, (39)Posts Per Side, (6) Positions Per Post, 11" Vertical Spacing, 13" HorizontalSpacing, Appalachian Electronic Tensioner, Electronic Stop Motion,Overhead Cleaner
YARN CONDITIONER1 – XORELLA MODEL CONTEXXOR YARN CONDITIONER, S/N 10220-2
(1992), 84" Dia. x 98"m +4/-1 Bar Working Pressure, 115C WorkingTemperature, 11,685-Liter Volume, 180-kW Electrically Heated and PushButton Control Panel
OPENING ROOM WASTE RECLAIMATION SYSTEM1 – INTERNATIONAL BALER CORP. MODEL C54 HORIZONTAL
HYDRAULIC BALER, S/N N/A (1990), with Twin Tank Feed System, (1) 5-Stage Vacuum Pump with 75-HP Motor, 6-Stage Vacuum Pump with100-HP Motor and Waste Collection Tank
2 – INTERNATIONAL BALER CORP. MODEL C54 HORIZONTALHYDRAULIC BALERS, S/Ns C5-1551-S1, C5-1552-S1 (Both 1995), withTwin Tank Feed System
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)8
FINISHING1 – ALEXCO REROLL MACHINE, S/N 2020 (2001), with
(2) Double Roll Unwind Stands, Yardage Counter, Back LitInspection Screen, Foot Controlled, with Traversing SewingHead and Process Controls, Feed System, A-Frame DriveStand
3 – BOND FABRIC RE-INSPECTION ROLL TO ROLLMACHINE (1975), with Back Lit Inspection Screen, (2) Double Roll Winders, Yardage Counter, ProcessControls and Take Away Conveyor
1 – WILLIAMSON MODEL AIRPACK FLOW THROUGHPLASTIC WRAPPING MACHINE (Est. 1997), with VariableSpeed Drive Rolls, Feed Through Power Belt Conveyor,Transfer Conveyor, 30"W x 100'L Power Belt FeedConveyor, Ultrasonic End Sealer and Process Controls
1 – INTERNATIONAL BALE CORP. VERTICAL HYDRAULICBALER
SEWING1 – SIRUBA SERGER MODEL 757 SEWING MACHINE,
S/N F-516M2-35, with Console 1 – KANSAI MODEL DLR-1508PR 4-NEEDLE SEWING
MACHINE, S/N 0509455, with Console 1 – JUKI SINGLE NEEDLE SEWING MACHINE, with Console 1 – PFAFF DOUBLE NEEDLE SEWING MACHINE,
S/N 437937, with Consoles 1 – JUKI MODEL LH-2172-6 DOUBLE NEEDLE SEWING
MACHINE, with Console 1 – BROTHER MODEL N SERIES NEEDLE SEWING
MACHINE, S/N MA4-N31-92-61 – JUKI MODEL MFB-860 NEEDLE SEWING MACHINE,
S/N MFEXE105391 – BROTHER MODEL DH4-B980-02 NEEDLE SEWING
MACHINE, S/N D85663431 – UNION SPECIAL MODEL 63900AML 1/2 NEEDLE
SEWING MACHINE1 – JUKI MODEL DDL-5550-6 NEEDLE SEWING MACHINE1 – PEGASUS MODEL M700 NEEDLE SEWING MACHINE,
S/N 81583881 – UNION SPECIAL MODEL 35800DN SEWING MACHINE,
S/N 15028971 – JUKI MODEL DDL-5550 SINGLE NEEDLE SEWING
MACHINE, with Console1 – BROTHER MODEL S7200 SINGLE NEEDLE SEWING
MACHINE, with Console 1 – NEW YORK PRESSING MACHINE MODEL SEAL-85
STEAM CLOTHES PRESS, S/N 81782
MATERIAL HANDLING1 – HYSTER MODEL S100E 10,000-LB. LP GAS FORKLIFT
TRUCK, S/N C004D08995H, Not In Service 1 – HYSTER MODEL S50XM 3,000-LB. LP GAS FORKLIFT
TRUCK, S/N D187V23646Y, 3-Stage Mast, Side Shifter, LowLift Capacity, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N D238944
1 – CATERPILLAR MODEL GC18K 3,000-LB. LP GAS FORKLIFTTRUCK, S/N A781C-02597, Not In Service
1 – CATERPILLAR MODEL V40E 3,000-LB. LP GAS FORKLIFTTRUCK, S/N 5NG01043, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N C592483, 3-Stage Mast, Solid Rubber Tires, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N C831727, 3-Stage Mast, Solid Rubber Tires, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N C592943, 3-Stage Mast, Solid Rubber Tires
1 – CLARK MODEL Y35-522-4321 3,000-LB. LP GAS FORKLIFTTRUCK, S/N Y355-522-4321, (Out of Service)
1 – SKYJACK MODEL 3020 20' ELECTRIC SCISSOR LIFT1 – SKYJACK ELECTRIC SCISSOR LIFT, S/N N/A
MAINTENANCE SHOP • PLANT SUPPORT EQUIPMENT
For more information, please visit us on the web at www.hilcoind.com/ACG 9
PLANT SUPPORT1 – SOUTHERN MONORAIL 2-TON X 58'W DOUBLE GIRDER TOP RUNNING BRIDGE CRANE,
with 2-Ton Pendant Controlled Cable Hoist 1 – CUSTOM DESIGNED & FABRICATED 58' DOUBLE GIRDER TOP RUNNING BRIDGE
CRANE, ECSA (Engineered Crane Systems of America), with (6) Fixed Position Blowers withProgrammed Travel Computer System
1 – 58' DOUBLE GIRDER TOP RUNNING BRIDGE CRANE, ECSA (Engineered Crane Systems ofAmerica), with (6) Fixed Position Blowers
1 – 58' DOUBLE GIRDER TOP RUNNING BRIDGE CRANE, ECSA (Engineered Crane Systems ofAmerica), with (6) Fixed Position Blowers
1 – VAHLE 1-1/2 TON X 30'L SINGLE GIRDER BOTTOM RUNNING BRIDGE CRANE, withDayton 2-Ton Pendant Controlled Chain Hoist
1 – ONAN MODEL 30DDA 37.5-KVA DIESEL BACKUP GENERATOR, S/N F760138141 (1976)1 – 12'D X 80'H CARBON STEEL VERTICAL STORAGE SILO, with (2) 25-HP Roots Vacuum
Blowers, and Electric Gate Valve Please Note: Difficult Removal Due to Size1 – 32" SCALLOPED EDGE GUILLOTINE CUTTER1 – RIETER MODEL RSB-951 BREAKER DRAW FRAME AUTO LEVELER, S/N N03150-4 (1995),
40" x 48" Single Can Delivery, Stationary Creel3 – ABINGTON 6-STAGE VACUUM PUMPS, Including, (1) 125-HP, S/N HP6-9807-826,
(1) 100-HP, S/N HP6-9806-825, (1) 100-HP, S/N HP7-9410-763, Each With Abington SteelWaste Collection Tank, Overhead Collection Hopper, Motor Starters
1 – RIETER MODEL B2/5 FIBER WASTE OPENER, S/N 1012007 (1990), with 6' Conveyor FeedBelt, Hump Magnet and CMC Pre-Feed Unit
2 – ARMSTRONG RUBBER COTTS GRINDERS, S/N 8L491, BL370LARGE QUANTITY OF PLANT & PRODUCTION SUPPORT EQUIPMENT, Including: Over 300Sections of Pallet Racking - 5 Tier with Metal Decking, Metal Work Desks, Pallet Jacks, Ladders,Safety Ladders, Bench Grinders, Floor Drill Presses, Rolling Carts, Banding Machines, Floor Fans,Portable Air Cooling Unit, Work Tables, Metal Storage Cabinets, Vacuum Cleaners, Push Carts, Etc.QUANTITY OF OFFICE FURNISHINGS & BUSINESS MACHINES, Including: Desks, DeskChairs, Book Shelves, Credenza, Small Conference Tables, Filing Cabinets, Conference RoomTables with Chairs, Audio Equipment, Computers, Printers, Networking Hardware, Etc.
MAINTENANCE SHOP1 – SOUTH BEND MODEL NORDIC 25 25" X 120" GAP BED ENGINE