Automotive Ethernet Solutions - Keysight … · 19/6/2019  · Compliance and protocol application are compliant to BroadR-Reach V3.2 and 100BASE-T1(IEEE 802.3bw), OPEN Alliance TC8

B R O C H U R E

Automotive Ethernet Solutions • AE6900T Automotive Ethernet Tx Compliance Solution

- AT6910T Automotive Ethernet compliance software

- D9020AUTP 100BASE-T1 Protocol Trigger & Decode

• E6962A Automotive Ethernet Rx Compliance Solution

• E6963A Automotive Ethernet Link Segment Compliance Solution

Compliance and protocol application are compliant to BroadR-Reach V3.2 and100BASE-T1(IEEE 802.3bw), OPEN All iance TC8 ECU, or 1000BASE-T1 (IEEE 802.3bp) specificatons respectively.

Page 2Find us at www.keysight.com

The cloudData services, reporting

and tracking

Climate controlsystems

Power seat control

Anti-lock braking

Tire pressuremonitoring

PODS for air bag systems

eCalls

Hands-freetelephony

GPS

Powertrain &engine management(MiL, SiL, HiL)

Rear-view camera

Backup sensors

77, 79 GHz

Collision avoidance

LTE-v

DSCR

Ethernet

Ethernet Ethernet Ethernet Ethernet Ethernet

Secure cloudaccess gateway

Body/comfortsystems

LIN

Chassis/safetysystems

CAN/CAN FD/FlexRay

Infotainmentsystems

USB

Powertrainsystems

CAN/CAN FD/FlexRay

Camera (ADAS)systems

Automotiveradar

V2Vcommunication

Automotive Ethernet-Driving the FutureAutonomous vehicles promise to change the nature of commercial and passenger

transportation over the roadways. Within new vehicles, data speed and bandwidth

requirements are increasing. With the development of automotive Ethernet, faster

data communications are now possible and the increasing demands for today’s

vehicles and future connected vehicles can be met. Unlike the slower speed

backplanes of CAN and LIN 100BASE-T1 Automotive Ethernet requires rigorous

compliance testing. Keysight’s full suite of automotive Ethernet solutions automate

testing and validation across Tx, Rx and link segment for 100 Mb/s and 1000 Mb/s

automotive Ethernet providing increased test accuracy and saving time.

Connected CarAutomotive electronics are increasingly complex with more sensors, controls, and

interfaces using higher bandwidth, which requires faster data throughput and more

reliable networks.

Ethernet has proven itself as a secure transfer medium that can move large amounts

of data as well as reduce connectivity costs and cabling weight.

The Connected Car

Page 3Find us at www.keysight.com

The Challenge

The standards for automotive Ethernet demand rigorous testing: IEEE 802.3bw, IEEE

802.3bp, OABR 3.2 and the OPEN Alliance TC8 ECU. System tests required to meet

these standards covers transmitters, receivers, and harness/connector assemblies.

Test instruments needed for the required measurements include vector network

analysis (S-parameters), bit error ratio (BER) testing, and protocol analysis of high-

speed digital signals.

When you move to an evolving technology, like automotive Ethernet, with complex test

requirements, your team is in unfamiliar territory, expertise with low-speed buses like

CAN/LIN is less relevant than you or they may want to believe. It takes a tremendous

amount of time to review and understand the details of each new standard. Additional

time is needed to fully understand the test cases, required equipment, and test

procedures. Interoperability can be a very time consuming issue, testing to the

standards prevents some of those issues surfacing after a product ships. Keysight

provides a solution that has thousands of hours invested in understanding the

standards and creating automated, repeatable compliance tests. Ready to help you

understand, integrate and deploy this technology.

Achieve Reliable, High-Performance Automotive EthernetKeysight has removed the complexity and headache involved in setting up and

executing the tests necessary for compliance with automotive Ethernet standards

for transmission, the harness and connector, and receiving connectivity. Keysight

automotive Ethernet solutions provide software, instruments, fixtures and cables

so you have everything you need for complete testing of 100BASE-T1 and

1000BASE-T1 standards. Whether you’re focused on design or validation, our

automotive Ethernet solutions will accelerate your innovations from debug to

characterization, to compliance, to completion.

Keysight 100BASE-T1 and 1000BASE-T1 test solutions perform end-to-end

functional and standards-compliance conformance testing of automotive Ethernet

devices, with optional protocol decoding. Our Automotive Ethernet solutions suite

not only give you all of the hardware, software, cables and accessories you need to

enable compliance tests, they also provide:

• A setup wizard for quick and easy setup, configuration and test

• A wide range of tests enabling faster and easier standards conformance

• Accurate and repeatable results from Keysight precision instrumentation

• Automated reporting with margin analysis

Keysight is fully invested in the creation of complete solutions for compliance testing, and we’ve built these solutions onupgradeable platforms. Our worldwide team of application and field engineers are is trained and ready to respond when you and your teams need assistance.

Page 4Find us at www.keysight.com

Faster, More Efficient Automotive Ethernet TestingKeysight’s automotive Ethernet compliance solutions perform a complete

set of conformance tests to meet the 100BASE-T1, 1000BASE-T1, and TC8

ECU specifications.

Transmitter Link Segment Receiver

Automotive Ethernet Compliance Solutions

Solution component overview

Key Features• Test software applications including:

• Protocol trigger and decode 100BASE-T1 (IEEE 802.3bw) standards

• All required 100BASE-T1 (IEEE 802.3bw), OPEN Alliance TC8 ECU, and 1000BASE-T1 Tx (IEEE 802.3bp) tests

• Highly automated and easy-to-use

• Report generation with pass/fail test results

• AE6900T Automotive Ethernet Tx Compliance Solution

- AT6910T Automotive Ethernet compliance software

- D9020AUTP 100BASE-T1 Protocol Trigger & Decode

• E6962A 100BASE-T1 Receiver Solution

• E6963A 100BASE-T1 Link Segment Application

Page 5Find us at www.keysight.com

Learn more at: www.keysight.com

For more information on Keysight Technologies’ products, applications or services,

please contact your local Keysight office. The complete list is available at:

www.keysight.com/find/contactus

This information is subject to change without notice. © Keysight Technologies, 2017-2019, Published in USA, June 19, 2019, 5992-2561EN

For further information go to: www.keysight.com/find/automotive-ethernet

Automotive Ethernet Solution BundlesBundles give you the licensed application software and the option to purchase connectors,

cables, and hardware for each solution. Choose from the application bundle model number

listed in Table 1.

Table 1.

AE6900T 100BASE-T1 Tx

E6962A 100BASE-T1 Rx

E6963A 100BASE-T1 Harness & Connector

SoftwareAT6910T compliance

softwareE6962A receiver

applicationE6963A link segment

application

D9020AUTP protocol trigger/decode

Accessories SMA cable and adapters SMA cable SMA cable and adapters

AE6950A frequency divider board 11636B power splitters

AE6941A Automotive Ethernet compliance test

fixture

AE6942A or AE6943A SMA to Molex/Mini-50 or SMA to

MATEnet adapter boards

Hardware DSOS254A S-Series Oscilloscope 2.5 GHz,

4 analog channels

M9010A PXIe Chassis E5071C Network Analyzer with option TDR and

N4431B Ecal 4 ports and connectors

33622A Function Arbitrary Noise Generator,

2 channel

M9037A PXIe

Embedded ControllerM3302A PXIe PXIe AWG and

Digitizer Combination

E5080B ENA Vector Network Analyzer,

options 440,181, 182 and N4431B Ecal 4 ports and

connectors

M3302A PXIe AWG