Automotive applications

SensorsInstrumentationData Acquisition Systems

automotive applications

www.leane.it

international

HRB Test System relies on Dewesoft hardware and software for measurement and data acquisition (Dewetron hw supported up to DEWESoft 7 or X1 version). A customized interface developed in NI-Labviewallows to manage the braking tests according to the company’s standard procedures, driving DEWESoft to perform data acquisition. So it is possible to use the power and flexibility of DEWESoft configure standard and non standard test setup and to be to provide effective visual feedback to the test driver.

HANDLING, RIDE AND BRAKING

The PCF Test System relies on DEWESoft software for data acquisition, managed via DCOM interface (as for HRB Test System) by a specific user interface developed in NILabview. The system is able to manage vehicle data, test session, data acquisition and standardized file naming, data processing, visualization and export.

Performance & Fuel Consumption

General Configuration panel

General Configuration panel Quick look panel end test

Real time test panel Configuration panel result Time history recovery test

Calculated acceleration in a test shooting in sicth gear

Test Configuration panel

Static acquisition selection panel

measurement to data analysisYour partner for vehicle testing from

HANDLING, RIDE AND BRAKING

PERFORMANCE & FUEL CONSUMPTION

ADAS

HOMOLOGATION: 13H

POWERTRAIN CHARACTERIZATION AND ANALYSIS

TESTING SOLUTIONS, CONSULTING, SERVICES

HRB Test System for a complete evaluation of the vehicle dynamic behaviour: driving feeling, emergency handling, ABS, TCS, ESC, track lap etc.

PFC Test System for measurement and analysis of vehicle performances, drag force (cost-down) and fuel consumption.

PWT Test System solution based on Rototest technology for quick characterization of the powertrainunit, evaluation of fuel consumption in NEDC or custom mission profile, transmission drag torque, NVH etc.

ADAS Test System for evaluation AEB, ACC, FCW, LDW, Blind-spot detection, Pre-crash, etc. Full solution

based on ABD robots, or DAQsolutions based on DEWESoft.

13H Test System for automation of brake homologation test procedure, allows data acquisition,analysisand reportaccording to reg.13 H.

Capability to deliver complete solutions for vehicle testing, from the selection of theright sensors and devices to training to testing outsourcing, including professional driver support.

HRB TS

PFC TS

13H TS

DAS TS

SR60 Steering robot

Guide soft target

PWT TS

Soft Pedestrian Target

Main program panel DTB

Start panelBrake test panel

The ADAS Test System relies mainly on ABD driving robots and control hardware and software, for driver o driverless testing. Synchronized data transmission between hunter and target vehicle is ensuredby a specific wireless connection. The included data processing software calculates the quantities neededfor objective assessment according to NCAP standard, or allows to export data to MATLAB to run customanalysis tools.

The ABD system can be integrated DEWESoft acquisition system in order to acquire relevantvariables for CAN bus in addition to the vehicle motion variables, and to create custom data display and on-board analysis procedures.

A system that is capable of automaticaly adjusting the speed of a vehicle to mach the speed of the car or truck in front of it.

The 13H Test System allows to run the brake homologation test according to reg. 13H procedure,in a fully automates way, guiding the driver step by step through the test sequence. Also this package is based on DEWESoft harware and software for data acquisition, managed by a specificuser interface developed in NI-Labview.

ADAS

Homologation: 13H test procedure

Brake efficiency loss panel

Time history end speed test

Time history end speed test brake pedal force

STATE OF THE ART TESTING EQUIPMENT

Sensors & Transducers

Data acquisition systemsA full range of data acquisition systems, from 4 upto hundreds of channels, for synchronous acquisitionof analog signals, CAN, GPS, video, thermography. Powerful and ready to use software, essential for the setup of all the devices and the management of data acquisition.

ABD Driving robotsDriving robots and static and guided soft targets forhigh reproducibility of vehicle dynamics and ADAS testing to asses system performances in all kind oftest required by NCAP standard procedures, or to create custom scenarios. The product range includesdriverless systems, which are essential to test dangerous situations or vehicle misuse cases dangerous situations or vehicle misuse cases involving too high accelerations for a human driver.

Rototest chassis dynamometersTurnkey solutions, for a complete analysis of the powertrain unit, including performance, fuel consumption, transmission drag torque, energy recuperation, NVH, and more. Modular architecture,available with hydraulic or electric actuation, suitablefor Internal Combustion Engine, HYBRID and Full Electric vehicles, for 2WD or 4WD.Electric vehicles, for 2WD or 4WD.

Sensors and signal amplifiers for measurement of all the relevant quantities

• GPS (basic, RTK, dGPS)• Inertial measurement Unit (IMU)• Linear and angular displacement• Position, speed, acceleration• Force, torque, pressure, temperature, noise and vibration• High quality sync. camera

Dual GPD/GLONASS/RTK AntennaDS-DISP-12dist > 0.5 m

EFFECTIVE SUPPORT AND PROVEN EXPERTISE

Technical support on DEWESOFT hardware and software

Customized software applications

Consulting & Services

Capability to develop applications based on DEWESoft or other softwares tailored according customer’s specific needs, in order to make the whole testing process even more automated, robust and efficient.Applications may cover:

• Data Acquisition

• ON board analysis and test validation

• Post processing and reporting

• Support defining the right service/product

• ON site technical Objective and subjective tests outsourcing, including professional driver

• Data analysis according to standard or custom procedures

• Development of procedures and methodologies

• Custom sensors development and production

DS-IMU2

S-BOX+ Sirius+ BP2

LEANE International Srl

PARMA

Headquarter:

Viale Partigiani d’Italia, 1 43123 Parma - Tel.: +39 0521.242495 Fax: +39 0521.24250 - E-mail: [email protected]

LEANE International is present since 1978 on the Italian market of both electronic instrumentation and sensorand is able to provide its customers with comprehensive solutions (from the sensor to report) in the field of data acquisition.

www.leane.it