21A1KV15 ÷ 21A1KV30 21A1KV15 12 ~2 1,5 1,4 8 0 30 18 21A1KV20 37 ~5 2 2 22 16 12 35 30 14 21A1KV25 53 ~7 2,5 3,2 8 14 9 12 30 25 14 21A1KV30 3 4 8 10 6 12 25 18 14 20 Direct acting S.V. for interception of fluids compatible with the construction materials. Minimum operational pressure is not required. The materials used and the tests carried out ensure maximum reliability and duration. Automation Heating subplate mounting 8W - Ø 13 (1) BDA - BDS - BSA 155°C (class F) BDF - BDV 180°C (class H) 12W - Ø 13 UDA 155°C (class F) 14W - Ø 13 GDH - GDV 180°C (class H) (1) Explosion-proof housing for coils with electrical connections EN 175301-803 on request. MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN MATERIAL. Max. allowable pressure (PS) 40 bar Ambient temperature: with coils class F -10°C + 60°C with coils class H -10°C + 80°C USE: USE: COILS COILS The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification. 15-02-2012 ODE 21A1KV15 ÷ 21A1KV30 PIPES: PIPES: Solenoid valve 2/2 way N.C. Direct acting Gaskets Temperature Medium V=FKM (fluoroelastomer) - 10°C +140°C Mineral oils (2°E),gasoline gas oil, fuel oils (7°E) B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water E=EPDM (ethylene-propylene) - 10°C +140°C Water, steam SUBPLATE MOUNTING For seals other than FKM replace the letter “V” with the ones corresponding to the other seals. E.I. 21A1KB15. Pipe Code Max viscosity Ø mm Kv Power Pressure min M.O.P.D. cSt °E l/mn (watt) bar AC bar DC bar :PRESENTATION: :PRESENTATION:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
21A1KV15÷
21A1KV30
21A1KV15 12 ~ 2 1,5 1,48
0
30 18
21A1KV20 37 ~ 5 2 222 16
1235 30
14
21A1KV25
53 ~ 7
2,5 3,28 14 912
30 2514
21A1KV30 3 48 10 612
2518
14 20
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
connections EN 175301-803 on request.MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F -10°C + 60°Cwith coils class H -10°C + 80°C
USE:USE:
COILSCOILS
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:B=NBR E=EPDMOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
Direct acting S.V. for interception of fluids compatible with theconstruction material.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coil class F - 40°C + 60°Cwith coil class H - 40°C + 80°C
USE:USE:
COILS:COILS:
The “ODE” reserves the right to carry out technical and aesthetic modifications without prior notification.
15-02-2012 ODE 21A1KR10 ÷ 21A1KR30
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
NoteThe use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar..
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel series 300Fixed core Stainless steel series 400Plunger Stainless steel series 300Phase displacement ring Copper - Cu 99,9%Spring Stainless steel series 300Seal R=RUBYOrifice: Inserted slot Stainless steel series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:See coils list
2. Complete plunger:Code R450820/R
3. Complete armature tube:Code R450606
4. Gasket O-Ring:Code R990002/S
KT130KR30-A=2+3KIT:KIT:
21A1KR10 ÷ 21A1KR30 ODE 15-02-2012
DIMENSIONS:DIMENSIONS:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
08-06-2012 (Internal technical data sheet) ODE 21A1ZR15D-GB
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21A1ZR15D-GBSolenoid valve 2/2 way N.O.Direct acting - dampness-proof IP 67
Special item-not standard
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
INCAPSULAMENTO E ROCCHETTO SONO REALIZZATICON MATERIALE VERGINE AL 100%.Max. allowable pressure (PS) 40 barAmbient temperature:with coil class F - 40°C + 60°Cwith coil class H - 40°C + 80°C
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBYOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 67 EN 60529 (DIN 40050)
with coil fitted by connector dedicated
KIT:KIT:KT130ZR30-FG=2+3+4+5+6+8+9
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
21AN2ZR20D-TF
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
02-07-2012 (Internal technical data sheet) ODE 21AN2ZR20D-TF
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barEnvironment temperature:with coil class F - 40°C + 60°Cwith coil class H - 40°C + 80°C
NoteAvailable on request and with minimum quantities.The use of rigid sealings usually implies a slight leakage, limited within 2 scc/min at the pressure of 1 bar.
21AN2ZR20D-TF (Internal technical data sheet) ODE 02-07-2012
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBYOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MATERIALS:MATERIALS:
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
08-06-2012 (Internal technical data sheet) ODE 21A1ZV25D-X007
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21A1ZV25D-X007
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Solenoid valve 2/2 way N.O.Direct acting - dampness-proof IP 67
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure ( (PS) 40 barEnvironment temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
21A1ZV25D-X007 (Internal technical data sheet) ODE 08-06-2012
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal V=FKMOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
02-07-2012 (Internal technical data sheet) ODE 21A1ZR20D-TF
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21A1ZR20D-TF
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBYOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
21A3KV15÷
21A2KV55
G 1/8
21A3KV15 12 ~ 2 1,5 1,4 8
0
30 18
21A3KV20 37 ~ 5 2 222 16
12 35 3014
21A3KV25
53 ~ 7
2,5 3,28 14 9
12 30 2514
21A3KV30 3 48 10 6
12 25 1814 20
21A3KV45 4,5 6,58 5 212 12 714 8
G 1/4
21A2KV15 12 ~ 2 1,5 1,4 8 30 18
21A2KV20 37 ~ 5 2 222 16
12 35 3014
21A2KV25
53 ~ 7
2,5 3,28 14 9
12 30 2514
21A2KV30 3 48 10 6
12 25 1814 20
21A2KV45 4,5 6,58 5 2
12 12 714 8
21A2KV55 5,5 98 3 1
12 7 2,514 10 5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBR E=EPDMOrifice:< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
02-07-2012 (Internal technical data sheet) ODE 21A2KV30-W ÷ 21A2KV55-W
21A2KV30-W÷
21A2KV55-W
Solenoid valve 2/2 way N.C.Direct acting
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21A2KB30-W.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barEnvironment temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
NoteAvailable on request and with minimum quantities.Also available with brass body without lead.
Special item-not standard
21A2KV30-W ÷ 21A2KV55-W (Internal technical data sheet)ODE 02-07-2012
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:1. Coil:
See coils list2 . Complete plunger:
Code R450898/V-25613. Complete armature tube:
Code R450606
KIT:KIT:KT130KV55-AM=2+3
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBR E=EPDMOrifice:< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Body Brass - UNI EN 12165 CW617NWelded armature tube Stainless steel AISI series 300 +
Brass - UNI EN 12165 CW617NFixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBROrifice:< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.
USE:USE:
COILS:COILS:
15-02-2012 ODE 21A3KR15 ÷ 21A2KR30
Solenoid valve 2/2 way N.C.Direct acting
PIPES:PIPES:
NoteAlso available with brass body without lead.The use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar.
T=PTFE(polytetrafluorethylen) - 40°C +180°C Steam, water
Max. allowable pressure (PS) 40 barAmbient temperature:with coil class F - 40°C + 60°Cwith coil class H - 40°C + 80°C
For seals other than RUBY replace the letter “R” with the onescorresponding to the other seals. E.I. 21A3KT15.
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
:PRESENTATION::PRESENTATION:
21A3KR G 1/821A2KR G 1/4 B 8 14,5 25 30 42 54
MATERIALS:MATERIALS:
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: R=RUBY
On request: T=PTFEOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:See coils list
2. Complete plunger:Code R450820/R
3. Complete armature tube:Code R450606
KT130KR30-A=2+3KIT:KIT:
21A3KR15 ÷ 21A2KR30 ODE 15-02-2012
Type PipeISO 228/1 COIL
TYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COILS:COILS:
02-07-2012 (Internal technical data sheet) ODE 21A2KT55-W
21A2KT55-WSolenoid valve 2/2 way N.C.Direct acting
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coil class F - 40°C + 60°Cwith coil class H - 40°C + 80°C
Gaskets Temperature MediumT=PTFE(polytetrafluorethylen) - 40°C + 180°C Steam, water
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Note.Available on request and with minimum quantities.With double-frequency coils the MOPD is 15% lower
Special item-not standard
21A2KT55-W (Internal technical data sheet) ODE 02-07-2012
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:1. Coil:
See coils list2. Complete plunger:
Code R451234/T3. Complete armature tube:
Code R450606
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal T=PTFEOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
BOBINETYPE
PUISSANCENOMINALE Ecombrements
W MaintienVA ~
AppelVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
02-07-2012 (Internal technical data sheet) ODE 21A2K0E45-OR ÷ 21A2K0E55-OR
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21A2K0E45-OR÷
21A2K0E55-OR
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Solenoid valve 2/2 way N.C.Direct acting
Gaskets Temperature MediumE=EPDM(ethylene-propylene) - 10°C +140°C Water, steam
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PotenzaPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
G 1/421A2K0E45-OR
53 ~ 74,5 6,5
8 05 2
21A2K0E55-OR 5,5 9 3 1
NoteAvailable on request and with minimum quantities.Also available with brass body without lead.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.%.Max. allowable pressure (PS) 40 barEnvironment temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
21A2K0E45-OR ÷ 21A2K0E55-OR (Internal technical data sheet) ODE 02-07-2012
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:1. Coil:
BDF08024DS2 . Complete plunger:
Code R450898/E3. Complete armature tube:
Code R4506034. Gasket O-Ring:
Code R990000/E
KIT:KIT:KT130KE55-F=2+3+4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal E=EPDMOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
21A2KL45-RPW
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
02-07-2012 (Internal technical data sheet) ODE 21A2KL45-RPW
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COILS:COILS:
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
NoteAvailable on request and with minimum quantities.Also available with brass body without lead.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barEnvironment temperature:with coil class F - 40°C + 60°Cwith coil class H - 40°C + 80°C
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
G 1/4 21A2KL45-RPW 53 ~ 7 4,5 6,5 8 0 10 3,5
Gaskets Temperature Medium
L=Rulon(fluoropolimer) - 40°C +180°C
Water, air , inert gas,mineral oils (2°E), steam,
gasoline, gas oil
Special item-not standard
1. Coil:See coils list
2 . Complete plunger:Code R452718/L
3. Complete armature tube:Code R450603
4. Gasket O-Ring:Code R990000/V
21A2KL45-RPW (Internal technical data sheet) ODE 02-07-2012
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MATERIALS:MATERIALS:
KIT:KIT:KT130KL55-GM=2+3+4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RulonOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
21A3ZR15D÷
21A2ZR30G
G 1/8
21A3ZR15D 12 ~ 2 1,5 1,48
0
35 3521A3ZR20D 37 ~ 5 2 2 30 3021A3ZR25D
53 ~ 7
2,5 3,216 16
21A3ZR25G12
17 1714
21A3ZR30D3 4
8 10 10
21A3ZR30G12
15 1514
G 1/4
21A2ZR15D 12 ~ 2 1,5 1,48
35 3521A2ZR20D 37 ~ 5 2 2 30 3021A2ZR25D
53 ~ 7
2,5 3,216 16
21A2ZR25G12
17 1714
21A2ZR30D3 4
8 10 10
21A2ZR30G12
15 1514
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carries out ensure maximumreliability and duration.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 40°C + 60°Cwith coils class H - 40°C + 80°C
NoteAlso available with brass body without lead.The use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar.
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBYOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.O.Direct acting
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBROrifice:< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
02-07-2012 (Internal technical data sheet) ODE 21A5KT55-W
21A5KT55-WSolenoid valve 2/2 way N.C.Direct acting
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/min (watt) bar AC bar DC bar
G 3/8 21A5KT55-W - - 5,5 9 8 0 6 2
Gaskets Temperature MediumT=PTFE(polytetrafluorethylen) - 40°C + 180°C Steam, water
Note.Available on request and with minimum quantities.With double-frequency coils the MOPD is 15% lower
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barEnvironment temperature:with coils class F - 40°C + 60°Cwith coils class H - 40°C + 80°C
Special item-not standard
21A5KT55-W (Internal technical data sheet) ODE 02-07-2012
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:1. Coil:
See coils list2. Complete plunger:
Code R451234/T3. Complete armature tube:
Code R450606
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal T=PTFEOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
KIT:KIT:KT130KT55-AM =2+3
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Cmm
Dmm
Emm
Fmm
B 8 14,5 25 46 30 42 54
21A5KT45÷
21A8KT55
G 3/8
21A5KT45
- -
4,5 6,58
0
5 1,512 10 3,514 12 6
21A5KT55 5,5 98 3,5 112 6 214 7 5
G 1/2
21A8KT45 4,5 6,58 5 1,512 10 3,514 12 6
21A8KT55 5,5 98 3,5 112 6 214 7 5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
15-02-2012 ODE 21A5KT45 ÷ 21A8KT55
Guarnizioni Temperature MediumT=PTFE(polytetrafluorethylen) - 40°C + 180°C Water, steam
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 40°C + 60°Cwith coils class H - 40°C + 80°C
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal T=PTFEOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
DIMENSIONS:DIMENSIONS:
1. Coil:See coils list
2. Complete plunger:Code R451234/T
3. Complete armature tube:Code R450606
KIT:KIT:KT130KT55-A=2+3
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
FmmType Pipe
ISO 228/1Cmm
21A5KV45÷
21A8KV55
G 3/8
21A5KV45
53 ~ 7
4,5 6,58
0
5 212
127
14 8
21A5KV55 5,5 98 3 112 7 2,514 10 5
G 1/2
21A8KV45 4,5 6,58 5 212
127
14 8
21A8KV55 5,5 98 3 112 7 2,514 10 5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21A5KB55.
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:B=NBROrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
FmmType Pipe
ISO 228/1Cmm
212A5KV45÷
212A8KV55
G 3/8
212A5KV45
53 ~ 7
4,5 6,58
0
5 212
127
14 8
212A5KV55 5,5 98 3 112 7 2,514 10 5
G 1/2
212A8KV45 4,5 6,58 5 212
127
14 8
212A8KV55 5,5 98 3 112 7 2,514 10 5
Solenoid valve 2/2 way N.C.Direct acting
USE:USE:
COILS:COILS:
PIPES:PIPES:
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Body Brass - UNI EN 12165 CW617NWelded armature tube Stainless steel AISI series 300 +
Brass - UNI EN 12165 CW617NFixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal V=FKMOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
FmmType Pipe
ISO 228/1Cmm
21A5ZV45D÷
21A8ZV55G
G 3/8
21A5ZV45D
53 ~ 7
4,5 6,58
0
4 4
21A5ZV45G12
6-
14 621A5ZV55D
5,5 98 2,5 2,5
21A5ZV55G12
3,5-
14 3,5
G 1/2
21A8ZV45D4,5 6,5
8 4 4
21A8ZV45G12
6-
14 621A8ZV55D
5,5 98 2,5 2,5
21A8ZV55G12
3,5-
14 3,5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.O.Direct acting
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21A5ZB45D.
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 400Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:B=NBROrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)