Automatic bollard -From Angeldp Bollards

Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,

Tel:0086 21 64766696 Fax:0086 21 64765594

ELECTRIC AUTOMATIC BOLLARD DP-PP-020

The Electric-Automatic bollard adopt the low voltage direct current machine with electronic brake as the power unit, it is safety and reliable with low

consumption, quick lift speed, low noise, stable running, ext. Through the connection with the third part access control system( smart card, RFID,

remote controller and program control ) . You can choose different auxiliary devices, such as loop, buzzer, and infrared prevention of collision. The

rise/fall time is 3-5 seconds, can satisfy the needs of high frequency access control.

The recommended electric automatic bollard maximum install spacing is 1.4, the depth of excavation have to depend on the different specifications

cylinder.

1. Application:

Public carport, private yard and other high frequency access control.

2. Technical parameter:

Bollards body weight: 48KG

Thickness: 3MM

Diameter: 114MM

Surface treatment: Polishing drawing

Height: 600MM

Embedment depth: 1200MM

Running model: DC machine

Reflective strip: Glosses Crystal lattice reflective tape 30MM

Noise DB: <60DB

Installation size: 320*300*1200 MM

Work environment: -20°+70°

Protection level: IP67

3. Component:

Reflector band

Various colors of Glossee reflecting band are optional .it

can be clear in the night only need weak light.

Top cover

The simple design can

compatible with all kinds of

architectural style. The

excellent workmanship bear

any proximity attack

Material 304 stainless steel,

LED light Various colors of LED lights are optional. Can make it beautiful and warn.


Tel:0086 21 64766696 Fax:0086 21 64765594

Limited It used to control the cylinder’s rise and fall position, when the contactor touch the limiting stopper, cut off the electricity supply will stop rising and falling, it has the function of over travel.

Flange Anti-skid flange.. Unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.

DC Motor

Voltage:24v Power:40W

Speed:3100RPM Torque：1.3kg.cm

Current：2.0A Brush service Life：

2000H

Electric-automatic Bollard

4. Installation note:


Tel:0086 21 64766696 Fax:0086 21 64765594

REMOVABLE BOLLARD DP-PP-027

Removable bollard aims at low frequency access control, it provides the best effective solution, not only increase the flexibility, but also simplifies the

balance of strength. Our professional mechanical locks and “T” type handle are patented, providing users with more beautiful appearance and easier

operations. Removable bollard can also work together with other series of bollards.

Removable bollard is easy to install, concrete slab is enough. The recommended maximum spacing is 1.4m, the depth of excavation of 30 cm.

1. Application:

Convenient store, supermarket and so on.



Thickness: 3MM

Diameter: 114MM


Height: 600MM


Running model: manual operation




3. Components

Base cover

To protect the base when the

removable bollard moving away and

used, can also be locked or released.

Reflector band Reflective crystal lattice glossee color

options with a variety of colors,

exposure to weak light, clearly visible at night.

Lock Base Bollards with a key to the base, after the upper surface of buried flush with the ground, keys can be locked or released Put bollards mobile.

Material 304 stainless steel, 316 stainless steel, carbon steel electrophoresis optional spray paint.

Anti-theft screws

A variety of optional anti-theft screws,

tools need to be exclusive.

Orient and lock Supporting the installation and locking.


Tel:0086 21 64766696 Fax:0086 21 64765594

It can assure the lock hole clean It can lock automatically after lifting or discharging

Removable Bollard

RETRACTABLE BOLLARD DP-PP-025

Retractable bollard is the most economical among the bollards. Its buried construction solves the problem of the cylinder storage in

access required. Unique flat double guides design save space and have good stability, it also minimizes the damage on surface of cylinder

and assures the service life. Our professional mechanical lock and “T” clamshell handle are patented, providing users with more beautiful

appearance and easier operations. Retractable bollard can also work together with other series Bollards.

The recommended maximum spacing is 1.4m , the depth of excavation should depend on the different specifications of cylinders.

1. Application:

Private garage, villa and so on.



Thickness: 3MM

Diameter: 114MM


Height: 600MM


Running model: manual operation




3. Components:

Reflector band

Various colors of Glossee reflecting

band are optional .it can be clear in the

night only need weak light.

Lock unique handle, friendly for up and down operation.


Tel:0086 21 64766696 Fax:0086 21 64765594

Material 304 stainless steel

Built-in lock bar It can assure the lock hole clean It can lock automatically after lifting or discharging

HYDRAULIC-AUTOMATIC BOLLARD DP-PP-021

Hydraulic-automatic bollards are used for high security access control; the rise-off can be stand-along controlled or linkage control not only by PCC

(Programmable Control Cabinet), but also by remote. It supports direction changes during the running and avoids accidents, the hydraulic automatic

bollard adopts high speed hydraulic unit, strong power, the rise/fall time is 4-6(adjustable), high reliability.

1. Application:

Government, nuclear power plant, the military warehouse, gas station, airport, docks and so on.


Power: 350W

Voltage: 220V/50HZ

Current: 2A


Goss weight: 120KG

Thickness: 6MM

Diameter: 219MM


Height: 600MM


Material: 304 stainless

Running model: hydraulic pressure

Rising and Falling time: 5-9 second

Reflective strip: Glosses Crystal lattice reflective tape

Install Size: 420*450*1000 MM


3. Components:


Tel:0086 21 64766696 Fax:0086 21 64765594

Reflector band




Top cover The simple design can compatible with all kinds of architectural style. The excellent workmanship bear any proximity attack

Material 304 stainless steel, 316stainiess steel, carbon steel with sprayed electrophoresis painting.

Pump parameter table

Motor Power 750W

Pump displacement 3.8L/min

Take-off and landing time 5sec

Flange Anti-skid flange Unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.

Hydraulic-automatic Bollard

4. Installation Note:

1) Using professional tool depend on geology to detect the size and the length for dig which decided by technology require.

2) Make sure the drainage of the soil( water flooding into the hole to observe the drainage speed, if they can’t be discharged in half an hour, it

will be necessary to arrange extra drainage system)

3) Lay down about 35CM thickness of sand, it should be enough strong to avoid to earth subsidence.

4) Connect all kind of wire and pipe, repeat to debug to make sure every cylinder of the whole system are in the level and line.

5) Pour concrete for fixing in a good drainage system condition.


Tel:0086 21 64766696 Fax:0086 21 64765594

PNEUMATIC-AUTOMATIC BOLLARD DP-PP-022

We can provide two kinds of system modes for different applications, open square type and access type.

The pneumatic-automatic bollards can be stand-along control, especially in square; one PCC (Programmable Control Cabinet) can control 20

bollards together. It also can fit the different rise-off time require, the fastest time is 3 sec. it also supports direction changes during the running and

avoids accidents, The pneumatic-automatic bollard does not need strong current construction, it has environmental power supply, reliable and safe.

1. Application:

Square, Public locations which need many bollards and have fast speed requirement.


Work Voltage: 24 V


Goss weight: 100KG

Thickness: 6MM

Diameter: 219MM


Height: 600MM


Material: 304 stainless

Running model: pneumatic pressure

Rising and Falling time: 3-5 second

Reflective strip: Glosses Crystal lattice reflective tape

Rise – off control: remote control (short range)/drive by wire(less than 100M)

Control cabinet size: 580*800*800

Bollard body size: 420 * 450 *900


3. Components:

Reflector band




Top cover

The simple design can compatible with all

kinds of architectural style. The excellent

workmanship bear any proximity attack


LED lights Various colors of LED lights are optional. Can make it beautiful and warn.


Tel:0086 21 64766696 Fax:0086 21 64765594

Air cylinder Choose air cylinder according to different specifications of bollards

Flange Anti-skid flange unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.

4. Installation Note:

1) Using professional tool depend on geology to detect the size and the length for dig which decided by technology require.

2) Make sure the drainage of the soil( water flooding into the hole to observe the drainage speed, if they can’t be discharged in half an hour, it

will be necessary to arrange extra drainage system)

3) Lay down about 35CM thickness of sand, it should be enough strong to avoid to earth subsidence.

4) Connect all kind of wire and pipe, repeat to debug to make sure every cylinder of the whole system are in the level and line.

5) Pour concrete for fixing in a good drainage system condition.

6) Pneumatic-automatic bollard need lay pipeline, and consider the location to installation.

Channel model

In Channel mode, each PCC can control 1-3penumatic-automatic bollards, bidirectional control valve, strong power, quick rise/fall speed, support direction changes during running, etc. it can also avoid circuit construction.(except for LED requirements) In case of power off condition, it still can have 3 times of operations, convenient for emergency treatment when have special circumstances.


Tel:0086 21 64766696 Fax:0086 21 64765594

Square mode

In Square mode, each PCC can control more than 20 pneumatic-automatic bollards. Distance can arrive to 50m, can be unified controlled by one or several units. You can debug every bollard in the whole system to keep the consistency. The power off mode can be set as NO and NC, to ensure the safety.

SEMI-AUTOMATIC BOLLARD DP-PP-026

Semi-Automatic bollard is suitable for higher security but low frequency access control system. Proceed from the economy, it is usually used

together with automatic Bollard, it has higher security protective effect and avoid of complex High/Low Voltage construction. As the safety

requirement increased, the bollard size becomes bigger, the air pressure assistant system of Semi-automatic Bollard will afford more load.

The decline process of Semi-automatic bollard is realized mainly by operator’s press. When the top of cylinder reach the ground level, the

mechanical lock by itself, the rise of Semi-Automatic bollard is realized 100% by the air pressure assistant system of Semi-automatic. After use the

special key to lose the lock, the cylinder will rise automatically to a certain level and locks automatically.

The recommended Semi-Automatic bollard maximum install spacing is 1.4M, the depth of excavation have to depend on the different specifications

cylinder. For special needs please contact local dealers.


Work Voltage: 24 V


Goss weight: 100KG

Thickness: 3MM

Diameter: 114MM


Height: 600MM


Running model: Gas spring


Noise dB (A) : < 60DB


Tel:0086 21 64766696 Fax:0086 21 64765594 Installation size: 280 * 235 *1200


Work environment: -10°+70°

2. Components

Reflector band


adhesive are optional .it can be clear in the

night only need weak light

Keys Can lock automatically to the correspondent Position on the top and bottom, unlocked by the special tool of Fwyoung.


Flange Anti-skid flange.. Unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.

Power Device According to the various of Semi-automatic bollard to choose the power Device system, it can assure the rise and fall process Success

Semi-automatic Bollard

Automatic bollard -From Angeldp Bollards

Business

electricautomatic bollard

program control

low noise

mmembedment depth

depth of excavation

shanghai angel dp

different auxiliary

dc machinereflective