SandPro mSand Automa�c Dump System for Desander The Automa�c Dump System mSand for Desanders will provide a complete solu�on for sand dumping process during frack and produc�on opera�ons. The mSand will automa�cally detect the right condi�on to start the dumping process. Two plug/ball valves (PV1 and PV2) and one flow control valve CPO ON/OFF (CV3) will open and close in a sequence of opera�on in order to protect the plug/ball valves from erosion damage, using the calibrated orifice CPO ON/OFF (CV3) as the sacrificial component. Features: Advantages: • Reduced OPEX by fewer well visits. • Reduced maintenance costs by protec�ng the integrity of the valves. • Easy installa�on, predic�ve opera�on with low operator training �mes. • Traceability of the en�re opera�on (6 months storage). • Communica�on: SCADA (ModBus Protocol). • Sequen�al opera�on of opening / closing of complete system. • Suitable for loca�ons without power, op�onal photovoltaic system. • Mode of opera�on: Autonomous / Remote / Manual (Local) Fluid Descrip�on Specifica�on Hydraulic max outlet pressure 3.000 PSI Hydraulic Fluid SAE68- ISO/DIN 6473-4- 3 Lts 12VCC 30Ah deep cycle gel - Qty 2 48hs Solar panel or 24VCC external power supply 60Mpa - 0.5%FS - 4-20mA - Ex 60Mpa - 0.5%FS - 4-20mA - Ex - Qty 3 Pump pressure sensor Field pressure sensor Internal power supply External power supply OPEX Cost Reduc�on Suitable for loca�on without net power Intui�ve user Interface (* mSand Provisional File Patent*)