Autodesk® Inventor® for Plant Kimberley Hendrix, Solutions Consultant D3 Technologies, LLC Tulsa, OK PD2681 I have all of our equipment modeled already for fabrication in Autodesk Inventor. Do I have to recreate that for my AutoCAD® Plant 3D models? The short answer is NO. Learn the process, along with some tips and tricks, to use your existing 3D models inside your AutoCAD Plant 3D models. This class will cover getting your existing 3D models into your Plant 3D environment without crippling your model and without recreating your work. Learning Objectives At the end of this class, you will be able to: • Manipulate your full fabrication models from Inventor so they are useful in Plant 3D • Use the features of the AEC Exchange, including the BIM information • Set up connection points so that you can correctly pipe up to your equipment • Use the step-by-step instructions to facilitate the process in your work environment About the Speaker Based in Tulsa, OK, Kimberley provides custom solutions for lean engineering, using Autodesk products and industry knowledge to streamline design and engineering departments. Kimberley has worked in the manufacturing/Plant industry for 24 years and specialized in automated solutions for the Heat Exchanger industry. She has worked with Autodesk® products since 1984. Kimberley is associated with D3 Technologies, LLC, as a Solutions Consultant, focusing on Plant, Automation, and Mechanical issues. [email protected]
12
Embed
Autodesk® Inventor® for Plant Kimberley Hendrix, …help.autodesk.com.s3.amazonaws.com/sfdcarticles/kA...Autodesk® Inventor® for Plant Kimberley Hendrix, Solutions Consultant D3
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Autodesk® Inventor® for Plant
Kimberley Hendrix, Solutions Consultant D3 Technologies, LLC Tulsa, OK
PD2681
I have all of our equipment modeled already for fabrication in Autodesk Inventor. Do I have to recreate that for my AutoCAD® Plant 3D models? The short answer is NO. Learn the process, along with some tips and tricks, to use your existing 3D models inside your AutoCAD Plant 3D models. This class will cover getting your existing 3D models into your Plant 3D environment without crippling your model and without recreating your work.
Learning Objectives
At the end of this class, you will be able to:
• Manipulate your full fabrication models from Inventor so they are useful in Plant 3D
• Use the features of the AEC Exchange, including the BIM information
• Set up connection points so that you can correctly pipe up to your equipment
• Use the step-by-step instructions to facilitate the process in your work environment
About the Speaker
Based in Tulsa, OK, Kimberley provides custom solutions for lean engineering, using Autodesk
products and industry knowledge to streamline design and engineering departments. Kimberley
has worked in the manufacturing/Plant industry for 24 years and specialized in automated
solutions for the Heat Exchanger industry. She has worked with Autodesk® products since 1984.
Kimberley is associated with D3 Technologies, LLC, as a Solutions Consultant, focusing on