1/17/2014 - jcS AutoCAD: Multi-view AutoCAD Multi-view drawing
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1/17/2014 - jcSAutoCAD: Multi-view
AutoCAD
Multi-view drawing
1/17/2014 - jcSAutoCAD: Multi-view
1. Initialize
• Limits
• Grid / Snap
• Toolbars
Note: These setup steps are optional
1/17/2014 - jcSAutoCAD: Multi-view
2. Layer Properties Manager
•
1/17/2014 - jcSAutoCAD: Multi-view
3. Construction• Draw:
Construction Line
Circle
• Modify:
Offset
•
1/17/2014 - jcSAutoCAD: Multi-view
4. Modify – First Feature
• Layers: Use Appropriate
• Draw
• Line: Object Snaps
• Offset: Construction
• Modify
• Trim
• Mirror
1/17/2014 - jcSAutoCAD: Multi-view
5. First Feature – Front View
• Xline –Add required
• Trim
• Layer
• Construction -> Object
1/17/2014 - jcSAutoCAD: Multi-view
6. Next Detail
• Repeat previous steps
1/17/2014 - jcSAutoCAD: Multi-view
7. Next detail
• Hidden in Top View
1/17/2014 - jcSAutoCAD: Multi-view
8. Holes
• Repeat Previous
1/17/2014 - jcSAutoCAD: Multi-view
9. Centerlines• Layer:
• construction -> centerline
• Modify
• Offsets: .0625
• Trim
• Erase
• LTSCALE: .25
1/17/2014 - jcSAutoCAD: Multi-view
10. Fillet / Chamfer
• Modify
• Chamfer
• Dist 1= .125
• Dist 2= .125
• No Trim
• Fillet
• Radius = .125
• Option: No Trim
• Draw
• Line
1/17/2014 - jcSAutoCAD: Multi-view
11. Complete Views
• Object
• Hidden
• Centers
• Layer
• Off: Construction
1/17/2014 - jcSAutoCAD: Multi-view
12. Section View - Setup
• Modify
• Trim
• Layer:
• Hidden -> Object
• Erase:
1/17/2014 - jcSAutoCAD: Multi-view
13 Hatch
• Boundaries
• Pick Points
• Pattern
• Type= ANSI31
• Properties
• Angle= 0
• Scale= .5
1/17/2014 - jcSAutoCAD: Multi-view
14. Threads (Symbolic)
• Front View
• Snap
• Line / Offset (.0625)
• Copy Selection (Array)
• Top View
• Offset .0625
1/17/2014 - jcSAutoCAD: Multi-view
15. Check / Dimensions
• Layer: Dimension
• Object Snap
• Dimension
• Linear
• Diameter
• Radius
1/17/2014 - jcSAutoCAD: Multi-view
16. Lineweight - Setup
• Layer Properties Manager
• Lineweight
1/17/2014 - jcSAutoCAD: Multi-view
17. Final Display
• LWT
• Layer 0:
• Threads
• Section lines
1/17/2014 - jcSAutoCAD: Multi-view
18. Multi-view Practice
• Setup (Miter)
• Previous
• Construction
• Trim
• Layers
Related Documents
