PRODUCTION RELEASE & REVISION REV DESCRIPT'N/BUYER DWG No PARTS No. BY CHK DATE 105(+/-5)mm 148+/-5)mm TITLE SIZE REV. SCALE MATERIAL UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN MM. - TOLERANCE LABEL +/- 3 MANUAL +/- 5 GUIDE +/- 5 COLOR DATE DRAWN CHKED APPROVALS PARTS LIST DESCRIPTION/MATERIAL ITEM QTY A4 DO NOT SCALE 2 MANUAL INSTRUCTION 50303467 NOTES 1.MODEL: HSUI-H75DxZ2U8 /NO BRAND (SDI 88pi AIO) 2.MATERIAL: 모조지 3.COLOR: BLACK 4.SIZE: 105(+/-5)mm x 148(+/-5)mm WHITE 3 BIND : STAPLES-2 B 전자 J.Y.LIU W.S.OH M.J.KWON A INITIAL ------------------- 50303467 J.Y.LIU M.J.KWON 02-26-M13 04-04-M13 Full HD 20x Auto-Focus ZOOM CAMERA Please read this manual thoroughly before use, and keep it handy for future reference. Design and specifications are subject to change without notice. 김경기 B INITIAL ------------------- 50303467 J.Y.LIU M.J.KWON 04-04-M13 04-04-M13 04-04-M13 04-04-M13 REV.B - 1p protocol 수정 2p 케이블라벨수정. 15p protocol&power input 수정 (재고 폐기 즉시적용)
21
Embed
Auto-Focus ZOOM CAMERAeng.hitron.co.kr/wp-content/uploads/2016/07/HSUI-H75DxZ2... · 2017-04-27 · 5) dzoom combiselect the digital-zoom display. on,off 6) zoom dispselect the zoom
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRODUCTION RELEASE & REVISION
REV DESCRIPT'N/BUYER DWG No PARTS No. BY CHK DATE
105(+/-5)mm
14
8+
/-5
)mm
TITLE
SIZE REV.
SCALE
MATERIAL
UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MM.- TOLERANCE LABEL +/- 3 MANUAL +/- 5 GUIDE +/- 5
A INITIAL ------------------- 50303467 J.Y.LIU M.J.KWON 02-26-M13
04-04-M13
Full HD 20x Auto-Focus
ZOOM CAMERA
Please read this manual thoroughly before use, and keep it handy for future reference.Design and specifications are subject to change without notice.
김경기
B INITIAL ------------------- 50303467 J.Y.LIU M.J.KWON 04-04-M13
04-04-M13
04-04-M13
04-04-M13
REV.B - 1p protocol 수정 2p 케이블라벨수정. 15p protocol&power input 수정
(재고 폐기 즉시적용)
Full HD 20x Auto-Focus
ZOOM CAMERA
Please read this manual thoroughly before use, and keep it handy for future reference.Design and specifications are subject to change without notice.
WARNING
CAUTION
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLSThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it any further.
Unplug the unit from the wall oulet if it is not going to be used for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials(curtains, draperies) that may block the ventilation holes.
Height and vertical linearity controls located at the rear panel are for special adjustments by qualified personnel only.
Clean the unit with a slightly damp soft cloth.Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish of the unit.
Retain the original carton and packing materials for safe transport of this unit in the future.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
ii
iii
FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
NORME NMB-003 DU CANADA.
WARNINGThis is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
CE COMPLIANCE STATEMENT
FCC COMPLIANCE STATEMENT
iv
IMPORTANT SAFETY INSTRUCTIONS
1
IMPORTANT : The user of this camera is responsible for checkingand complying with local, state, and federal laws and statutes concerningthe recording and monitoring of audio signals.
The 1/2.9” 2M full HD CMOS X20 ZOOM camera, especially for closed circuit
television CCTV and security surveillance application.
THE CAMERA FEATURES
INTRODUCTION
High performance SONY 1/2.9” Exmor CMOS.
2.2M 1080p Full HD, Excellent picture quality.
1920x1080p / 30fps, 1280x720p / 60fps.
20x Optical zoom. (x320 Zooming capability / Digital : 16x)
Zoom and Focus Control via Remote or Keyboard Controller.
Camera Mount : camera mount directly to the wall or ceiling.
TM
2
CAMERA CONNECTIONS
1. Lens : 20x Optical Zoom( f=4.7~94mm) Lens for wide area monitoring.2. Video(CVBS) : BNC connector used to connect the camera to a monitor, switcher, etc.3. Video(HD-SDI) : BNC connector used to connect the camera to a HD-SDI monitor, HD-SDI convertor, etc.4. Power : 24 AC input / 12V DC input Power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz Use Certified/Listed Class 2 power source only. * If using DC 12V power adaptor, use a power supply capable of supplying 15 Watts.5. RS 485 CONTROL GREEN : RS485+ BLUE : RS485-6. Day & Night External CONTROL7. ALRAM OUT8. GROUND How to Adjust ZOOM/FOCUS. - Remote Controller. Insert the din jack of remote controller to the hall of housing Adjust the zoom using up/down key. Adjust the focus using left/right key. - Keyboard Controller. Connect the 485(+)(-) of keyboard controller with 485(+)(-) Terminal Block. Adjust the zoom using tele/wide key. Adjust the focus using near/far key.
REMINDER:
Never aim the camera directly into the sun.
3
Screw Firmly attach the bracket to the wall or ceiling
DIMENSIONS
WATER INGRESS PREVENTION
UNIT : mm (inches)
REMOTE CONTROL PORT CAP
After using the Remote Control cable, disconnect it and insert the Remote Control Port Cap. Secure it tightly.
PACKAGE CONTENTS
Caution : This is a sealed camera with no internaladjustments and as such opening the case mayinvalidate the warranty.
(3.4) (6.5)
(10.9)
SUNSHIELD
SUNSHIELD-BOLT SCREWS REMOTE CONTROLLER
CAMERA
4
CAMERA FIXING
CAMERA ADJUSTMENT
CAMERA CONNECTION
5
Connect the remote control using the 6 pin din connector end to the socket within the camera:
Connect the BNC to a set up monitor to view the picture and On Screen Menus.
To Enter the menus press the button on the remote control.
To Navigate the menus, move the button left/Right/Up and Down, press the button to Enter.
END - takes you back a step in the OSD or exits from the OSD
EXPOSUREThe EXPOSURE menu is used to set the automatic light control method for the camera. It provides the ability to adjust the SHUTTER speed, BRIGHTNESS, AGC, DSS and ACEfunctions of the camera.
1) IRISSelect the IRIS open. ▶ CLOSE, F1.8 - F322) SHUTTERSelect the SHUTTER speed level.▶Auto,1/30(25), 1/60(50), FLK~ 1/240 - 1/60.000sec)3) BRIGHTNESSAdjust the BRIGHTNESS level. ▶ 0 ~ 204) AGCAdjust the Auto Gain Control level. ▶ 0 ~ 75) DSSSelct the Digital Slow Shutter level. ▶ OFF, x2 ~ x86) ACESelect the Adaptive Contrast Enhancer. (D-WDR) ▶ ON, OFF7) DEFOGSelect the DEFOG mode. ▶ OFF, LOW, MIDDLE, HIGH* When DEFOG is ON. ACE and WDR function can not turn on.
The LENS menu is used to set the AF lens control and initialization. It provides the ability to adjust zoom speed, focus speed, distance and lens initialization functions of the camera.
8
<EXPOSURE>
F1.8F NORETURN
<IRIS>
<EXPOSURE>
AUTOAUTOIIIIIIIII 7IIIIIIIII 5OFFOFFOFF
IRISSHUTTERBRIGHTNESSAGCDSSACEDEFOGRETURN
►
AWBThe screen color can be adjusted by using the Auto White Balance function. It compensates for deviations in the white color caused by changes in the color temmperature of the light source so that the colors are reproduced correctly.
1) AUTO Automatically adjust color temperature.2) AUTOext Automatically extended range of color temperature adjustment.3) PRESET Automatically readjust only by pressing PRESET.4) MANUAL Manual mode.
User can change Red and Blue gain value manually.COLOR TEMPERATURE LOW, MIDLE, HIGHR-GAIN 0 ~ 20B-GAIN 0 ~ 20
The WDR/BLC menu is used to the ability to expand the dynamic range and to prevent back lighting from the image.1) WDR Select the Dynamic Range level.
* When WDR is ON, ACE and DEFOG function can not turn on.GAIN Adjust gain level. ▶ 0 ~ 10 WEIGHT
2) BLC Adjust the size of Back Light Compensation area. X-POS Adjust the window X-Axis position.Y-POS Adjust the window Y-Axis position.X-SIZ Adjust the window X-Axis size.Y-SIZ Adjust the window Y-Axis size.
Adjust WDR level. ▶ 0 ~ 4
9
<DAY&NIGHT>
The DAY&NIGHT menu is used to configure the day and night related setting for the camera.
1) D&N AUTO- Input Method SENSOR DAY&NIGHT mode are changed according to the sensor inputs.
The IMAGE menu provides the ability to adjust the DNR, MOTION DET, PRIVACY, SHADING DET, DEFECT DET and PRESET functions of the camera.
1) DNR Select Digital Noise Reduction.▶ OFF, LOW, MIDDLE, HIGH
2) MOTION Detects the Motioned Object in the image. ▶ ON, OFFRESOLUTIONSENSITIVITYWINDOW USE
X-POS Adjust the AREA X-Axis position. ▶ 0 - 58
Y-POS Adjust the AREA Y-Axis position. ▶ 0 - 32
X-SIZ Adjust the AREA X-Axis size. ▶ 2 - 60
Y-SIZ Adjust the AREA Y-Axis size. ▶ 2 - 34
ALARM Motion Alarm ▶ ON, OFF
PRESET ▶ ON, PRESET - 6.
DWELL TIME Keep alarm out during dwell time. ▶ 3 - 60 SEC3) PRIVACY Hide an area you want to hide on the screen.4) SHADING DET Compensates for lens SHADING.5) DEFECT DET Compensates for bad pixels.
PROTOCOL Select RS485 PROTOCOL. ▶ FASTRAX, PELCO-P, PELCO-D,COMMANDBAUD RATE Select serial communication speed.▶2400, 4800, 9600, 19200, 38400 BPSSAVE Save the current settings.
2) CAM TITLE Maximum of 10 characters are allowed.3) DISPLAY Set the position of the camera ID. & title.4) OUT MODE Image output method.
RESOLUTION Select Digital output 1080P or 720P. ▶ 1080P, 720PVIDEO MODE Select NTSC or PAL.CVBS SCALE Select image scale. ▶ CROP(4:3), OFF, FULL(4:3)COLOR RANGE Select image color range. ▶ CLIP, FULL
5) LANGUAGE OSD menu LANGUAGE.6) VERSION Firmware VERSION.7) RESET Factory initialization of camera settings. ▶ NTSC, PAL
SYSTEM
The IMAGE menu provides the ability to adjust the RS485, CAM TITLE, DISPLAY,OUT MODE, LANGUAGE, VERSION and RESET functions of the camera.