AUTHOR: Lect. PhD. Eng. LIANA IUREŞ Politehnica University of Timişoara Buildings Faculty Civil Engineering and Installations Department NEW SUSTAINABLE BUILDING MATERIALS
Jan 07, 2016
AUTHOR:
Lect. PhD. Eng. LIANA IUREŞ
Politehnica University of TimişoaraBuildings Faculty
Civil Engineering and Installations Department
NEW SUSTAINABLE BUILDING MATERIALS
Main Characteristics Main Characteristics of Industrial Wastes as of Industrial Wastes as
to be Used in to be Used in Sustainable Building Sustainable Building
MaterialsMaterials
Industrial wastes - Industrial wastes - generalities generalities
• From Wikipedia, the free encyclopedia
• Industrial waste is the waste produced by industrial activity which includes any material that is rendered useless during a manufacturing process such as that of factories, mills and mines.
• It has existed since the outset of the industrial revolution.[1] Some examples of industrial waste are chemical solvents, paints, sand paper, paper products, industrial by-products, metals, and radioactive wastes.
• Toxic waste, chemical waste, industrial solid waste and municipal solid waste are designations of industrial waste. Sewage treatment plants can treat some industrial wastes, i.e. those consisting of conventional pollutants such as biochemical oxygen demand (BOD). Industrial wastes containing toxic pollutants require specialized treatment systems.
INDUSTRIAL WASTE:
- FLY ASH
1.FINE
2. ULTRAFINE
3. DENSE SLLURY
- MICROSILICA (SILICA FUME)
- PHOSPHO-GYPSUM
X-ray deffraction:X-ray deffraction:
• The industrial wastes represent a huge problem in our days.
This simple sentence represents the base problem that makes the starting point of the scientific researches all over the world in all the research fields. Researches in the building material follow this trend.
• New building materials having industrial waste into their composition were tested and designed all over the world. These materials can make a big difference into the industrial wastes management.
• Speaking about environmental and climate protection, building material industry occupies an important place because it generates about a quarter of the total amounts of wastes. If this industry is to further develop it should take into consideration of producing new sustainable materials.
• The fundamental characteristic of a friendly environmental building material is to reduce its negative impact and to enhance positive impact on the environment into its manufacturing procedure as well as into its composition.
• Taking into consideration all above mentioned facts, one can state that the future building materials must be made using the existing wastes from all industrial wastes.
• One power plant produces annually around 1,170,000 tons of fly ash wastes which are to be deposited on fields near populated areas, resulting in health problems for humans and animals in the same manner, affecting also the surrounding vegetation.
Figure 1. Fly ash deposit
• The utilisation of fly ash by the construction industry is regulated by technical standards, such as the EN450 standards in Europe, the ASTM C-618 standards in the USA and their equivalents in Asia.
• Various methods have been attempted to improve the quality of fly ash in an effort to make it more suitable for industrial applications. The most simple and commonly applied process is to grade the fly ash by particle size, which categorises it for a range of cementitious applications. This is referred to as Classified Ash.
• Additional improvements are made by the removal of some carbon in an effort to bring the overall Loss on Ignition (LOI) content below the 7 per cent demanded by BSEN450 Category A & B for use as a CEM I replacement in ready-mixed concrete.
• The XXI st century has a big problem to solve: to reduce the environmental problems that appeared during the big industrial development in the past century. This leads to important problems regarding the design and preparation of the building products and materials, so that finally to obtain an economic cost of the product, on short and long time periods, also a “friendly with the environment” during its fabrication process.
• Romania it is one of the world’s biggest fly ash producers, this is because of burning a low quality of coals. In the 1980 year, 15 millions tones of fly ash were produced.
• The fly ash it is an important industrial waste that resulted from the burning of powder coal at temperatures between 1.200 – 1.600 °C. From each tone of coal it results 0.15 – 0.6 tones of fly ash.
• In our days, in Romania there are recorded 951 industrial waste deposits that cover a surface over 11000 hectares.
• Table 1 present the industrial waste deposits as they are presented by Government Department.
• The reuse of fly ash as an engineering material primarily stems from its pozzolanic nature, spherical shape and relative uniformity. Nearby Timisoara City at Utvin, there it is one of the biggest air pollution sources from west Romania: the fly ash deposit of Power Plant South Timisoara. This deposit covers 50 hectares and it was started since 1987. In this moment, special equipment is in function which produces dense slurry. This dense slurry is and admixture of fly ash and water in 1:1 proportion.
• Fly ash utilization, especially in concrete, has significant environmental benefits including:
• - increasing the life of concrete roads and structures by improving concrete durability;
• - net reduction in energy use and greenhouse gas and other adverse air emissions when fly ash is used to replace or displace manufactured cement;
• - reduction in amount of coal combustion products that must be disposed in landfills;
• - conservation of other natural resources and materials.
Experimental programmeExperimental programme• Experimental determinations were made on
new building materials realized with ultra fine fly ash (from Timisoara Power Plant) classical binders and sand.
• There were realized mixtures with the following compositions:
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
COMPOSITIONS:
For series 1, 3 and 5, the materials structures are: - Water = 20%;
For series 2 and 4, the materials structures are: - Water = 15%;
- Dry Materials = 80% from:
aggregate = 40% (sand 0-4 mm);
blended binders = 60%.
- Dry Materials = 85% from:
aggregate = 40% (sand 0-4 mm);
blended binders = 60%.
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
COMPOSITIONS:
BATCHWater
[%]
Lime
L
[%]
Cement
C
[%]
Fly Ash
FA
[%]
Sand
0-4 mm
[%]
Superplasticiser
Series 1 L10 C10
20 4.8 4.8 38.4 32 FM 40
Series 2 L10 C10
15 5.1 5.1 40.8 34 FM 40
Series 3 L10 C10
20 4.8 4.8 38.4 32 Plaston
Series 4 L10 C10
15 5.1 5.1 40.8 34 Plaston
Series 5 L10 C10
20 4.8 4.8 38.4 32 -
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Physical and mechanical characteristics of building materials with fly ash:
Batch
Apparent density
a, [kg/m3]
Tensile strength
ft, [N/mm2]
Compression strength
fc, [N/mm2]
7 days 28 days 7 days 28 days 7 days 28 days
Series 1 L10 C10 1843 1690 2.60 2.74 10.23 20.87
Series 2 L10 C10 1947 1840 3.96 2.58 13.32 20.01
Series 3 L10 C10 1684 1465 3.14 1.87 11.83 12.95
Series 4 L10 C10 1919 1725 3.69 2.57 12.55 15.16
Series 5 L20 C10 1895 1804 2.48 2.11 7.70 17.10
To establishing the blended binders compositions was used the next model:
%Blended binders=%(classic binders + UFA) = 100% (1)
where:
- classic mineral binders=cement (C)+lime (L);
- UFA=ultra fine fly ash from Power Plant.
• The blended binder compositions were fixed by using 10%, 20% and 25% of lime (L), 5%, 10% and 20% of cement and ultra fine fly ash (UFA) was obtaining from relation:
%UFA=100%-%Blended binders (2)
• During the compound mixing the superplasticizer (polycarboxylatether) was added in 0.5% from blended binder’s mass proportion.
• The prismatic samples have been made with 40x40x160 mm dimensions.
The samples were realized in two steps:
▪first was prepared a manual dry mixture from sand, ultra fine fly ash, lime/cement;
▪second, water was added, the mixture was
2 minutes mechanical mixed, superplasicizer was added and 2 minutes mechanical mixed again.
The compactness was performed on jolting table in two sequences: 30 jolts in 30 seconds for the first half fresh material and 30 jolts in 30 seconds for the steel mould filled with all fresh material quantity.
The samples were kept into wet air box until 28 days age.
Experimental resultsExperimental results
Apparent density, bending tensile Apparent density, bending tensile
strength and compression strength and compression
strength are present into Table 3.strength are present into Table 3.
The apparent density at 28 days age for different batches, presented in Table 3, have a value between 1762 kg/m3 and 1987 kg/m3 which framed the materials in medium heavy mortars category or cell concretes.
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Tensile strength
2.6
3.96
3.14
3.69
2.482.74
1.87
2.57
2.11
2.58
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
20% Series 1 L10C10
30% Series 2 L20C10
20% Series 3 L10C10
20% Series 4 L10C10
20% Series 5 L10C10 BATCH
fct [N/mm2]
7 days
28 days
Legend:
(L+C)
Compression strength
11.83
20.8720.01
15.1617.1
12.5513.32
10.23
7.7
19,00
0
4
8
12
16
20
24
28
32
20% Series 1 L10C10
30% Series 2 L20C10
20% Series 3 L10C10
20% Series 4 L10C10
20% Series 5 L10C10 BATCH
fc [N/mm2]
7 days
28 days
Legenda:
(L+C)
• For materials of G1 group• Mechanical strength obtained at 7 and 28
days age, have the optimal behaviour for series 1 L10 C10 and series 3 L20 C10.
• Although have obtained high levels of fc to 28 days (> 30 N / mm2), fct presents a decrease for the age of 7 days to 28 days. These characteristics are proper for small items such as paving plates.
• For a constant percentage of 10% cement, the increase of the percentage of lime of 10% (series 6 L10 C10) to 20% (series 8 L20 C10) led to lower fct with 0.35 N/mm2, representing 12.0% and to increase fc with 3.74 N/mm2.
• For the case of constant quantity of lime (10%) and increasing the proportion of cement to 10% (Series 6 L10 C10) at 20% (series 9 L10 C20) an increase of fct with 0.12 N/mm2 (4.1%) and of fc with 8.82 N/mm2 (46.4%).
• The thermal conductivity coefficient was determinate with Almemo 2290-8 device for series 1 L10 C10 and the values obtained was l = 0.70 W/(m●K). This coefficient is the same like brick and less than concrete thermal conductivity.
• The technical efficiency, thermal efficiency, economic efficiency and sustainability index are presented into Table 4.
• A reference Materials was chosen as an ideal material for comparison with classical as well as with new materials.
• The technical, thermal and economic efficiency was express taking into account three coefficients as follow:
• From Table 4 and Fig. 1 it can be concluded:
• The thermal efficiency b1 as the ratio between the thermal resistance R and the cost C, has the maximum value for Reference Material (25) and for cell concrete (10.8). The new materials are characterized by thermal efficiency between 2.2 to 3.4. The small value were obtained for ordinary concrete b1=1.0 and solid brick b1=1.2.
• The economical efficiency b2 expressed by the ratio between the compressed strength and cost has the minimum values are for cell concrete (8) and solid brick (9) due to smaller value of the compressive strength. Economical efficiency for new material with the values between 45 and 62 is very similar with the Reference Material (50).
• Technical efficiency, as ratio between the compressive strength and the apparent density is with the maximum value for the Reference Material (33). From the new materials the Series 3 (18.4) and Series 4 (18.2) are characterized with the higher value. The ordinary concrete as well as the cell concrete has obtained the smaller values (11 and 8.9); the minimum value is for solid brick b3=5.9.
Sustainability of new materialsThe sustainability index was calculated by
formula:
• This index refers to four components of the sustainability dimensions: ecological (by E=energy), economic (by C=cost) and social (by R=thermal transfer resistance and fc=compressive strengths).
)f
f0.15
R
R(0.15
C
C0.3
E
E0.4S
Rc
cR
RR
• The results of the analysis of sustainability are presented into Table 4 and Fig. 2. Reference material was chosen to have the maximum value of sustainability index (S=1).
• The solid brick is characterized by a minimum value of S=0.271 as well as cell concretes with S=0.478 due to of high energy included for obtaining, a higher cost and a small compressive strength. The new materials have a sustainability index of S=0.612-0.817 which is higher as compared with ordinary concrete S=0.53.
• The sustainability was expressed, too, by the energy only with the next relation:
• where: ER is the energy of the Reference Material and E is the energy incorporated by the other materials. The energy sustainability index was obtained as S1=0.444-0.920 for new materials with ultra fine fly ash and of S1=0.364 for cell concrete as well as of S1=0.332-0.388 for ordinary concrete. The minimum values has the solid brick S1=0.271.
E
ES
R
1
ConclusionConclusion• The new materials are characterised by
an important economical efficiency like Reference Materials.
• Technical efficiency, as a ratio between the compressive strength and apparent density is a high one as compared with reference Material.
• The thermal efficiency expressed by the thermal efficiency index b1 as well as by energetic sustainability index S1 of the new materials is much better as compared with ordinary concrete (the best value were obtaining for series 6 and 10).
• A comprehensive characterisation of the new materials was defined by a new concept: sustainability index S (see formula 6).
• According to this index the new materials (especially series 6 and 10) are very close to Reference Material which means they are sustainable.
• Taking into account the characteristics presented before, the new materials with industrial waste (ultra fine fly ash) are recommended to be used as prefabricated blocks for masonry and slabs for pavement.
MATERIALS FOR ROAD INFRASTRUCTURE
COMPOSITIONS:
BatchWater
[%]
CementC
[%]
Fly AshFA[%]
Sand0-4 mm
S[%]
Series 1 C5 25 5 70 25
Series 2 C10 25 10 65 25
Series 3 C15 25 15 60 25
Series 4 C20 25 20 55 25
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Physical and mechanical characteristics of building materials with fly ash:
Batch
Apparent density
a, [kg/m3]
Tensile strengthft, [N/mm2]
Compression strength
fc, [N/mm2]
7 days 28 days 7 days 28
days 7 days 28 days
Series 1 C5 1539 1348 0.54 0.63 2.99 3.45
Series 2 C10 1560 1321 0.68 0.89 3.46 3.71
Series 3 C15 1610 1436 0.72 1.06 5.11 5.92
Series 4 C20 1642 1462 1.15 1.75 5.44 6.33
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
C5 C10
C15C20
7 days
28 days
6.33
5.29
3.713.45
5.44
5.11
3.46
2.99
1
2
3
4
5
6
7fc [N/mm2]
BATCH
Compressive strength
7 days
28 days
Legend:
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
The composition mixture with industrial recycling waste (fly ash and silica fume):
No. Batch Water[%]
Lime[%]
Cement
[%]
Silica fume[%]
Fly ash[%]
Sand[%]
1. Series 1L10 C10 22.4 4.7 4.7 - 37.2 31
2. Series 2L10 C10 M5 22.4 4.7 4.7 2.3 34.9 31
3.Series 3L10 C10 M10
22.4 4.7 4.7 4.7 32.5 31
4. Series 4L10 C20 M5 22.4 4.7 9.4 2.3 30.2 31
5.Series 5L15 C15 M10
22.4 7.0 7.0 4.7 27.9 31
6.Series 6L10 C20 M10
22.4 4.7 9.4 4.7 27.8 31
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Physical and mechanical properties
No. Batch
Apparent density
a, [kg/m3]
Tensile strength
ft, [N/mm2]
Compression strengthfc, [N/mm2]
7 days
28 days
7 days
28 days
7 days
28 days
1. Series 1L10 C10 1726 1718 0.70 2.62 4.14 11.62 6.76
2.Series 2L10 C10 M5
1735 1724 1.61 3.75 5.83 15.04 8.72
3.Series 3L10 C10 M10
1747 1736 1.61 4.03 6.10 16.60 9.56
4.Series 4L10 C20 M5
1774 1743 2.23 4.21 8.70 20.18 11.58
5.Series 5L15 C15 M10
1754 1754 2.22 4.45 7.66 21.51 12.34
6.Series 6L10 C20 M10
1784 1758 2.64 4.68 10.04 23.79 13.53
,a
cf
kg
mkN
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Compressive strengths:
(L+C+M)
11.62
15.04
20.1821.51
23.79
10.04
4.145.83
7.668,70
6,10
16,60
0
3
6
9
12
15
18
21
24
27
20% Series 1 L10C10
25% Series 2
L10C10M5
30% Series 3
L10C10M10
35% Series 4
L10C20M5
40% Series 5
L15C15M10
40% Series 6
L10C20M10 BATCH
Rc [N/mm2]
7 days
28 days
Legend:
f
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
The material composition with fly ash and phospho-gypsum:
No. Batch Water[%]
Lime[%]
Cement
[%]
Phospho-
gypsum[%]
Fly ash[%]
Sand[%]
1. Series 1G10 L10 C10 20 4.8 4.8 4.8 33.6 32
2. Series 2G10 L20 C10 20 9.6 4.8 4.8 28.8 32
3. Series 3G10 L10 C20 20 4.8 9.6 4.8 28.8 32
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
The physical and mechanical characteristics for material with fly ash and phospho-gypsum:
No. Batch
Apparent density
a, [kg/m3]
Tensile strength
ft, [N/mm2]
Compression strength
fc, [N/mm2]
7 days
28 days
7 days
28 days
7 days
28 days
1. Series 1G10 L10 C10 1821 1812 1.16 4.80 4.64 26.60 14.67
2. Series 2G10 L20 C10 1846 1831 1.18 7.03 4.65 28.02 15.30
3. Series 3G10 L10 C20 1858 1847 1.39 6.91 5.61 32.39 17.53
,a
cf
kg
mkN
,R
a
c
kg
mkN
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Tensile strength:
1.16 1.18 1.39
7.03 6.91
4,80
0
1
2
3
4
5
6
7
8
30% Series 1
G10L10C10
40% Series 2
G10L20C10
40% Series 3
G10L10C20 Batch
R i [N/mm2]
7 days
28 days
Legend:
(L+C+G)
f
t
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Compressive strength:
4.64 4.655.61
26.628.02
32.39
0
5
10
15
20
25
30
35
30% Series 1
G10L10C10
40% Series 2
G10L20C10
40% Series 3
G10L10C20 Batch
Rc [N/mm2]
7 days
28 days
Legend:
(L+C+G)
f
BUILDING MATERIALS WITH ULTRA FINE FLY ASH:
Group BATCH Water[%]
Lime[%]
Cement[%]
Ultra fine Fly Ash
[%]
Sand0-4 mm
[%]
Sand4-8 mm
[%]
G1
Series 1 L10 C10 20 4.8 4.8 38.4
32 -
Series 2 L20 C5 20 9.6 2.4 36.0
Series 3 L20 C10 20 9.6 4.8 33.6
Series 4 L10 C20 20 4.8 9.6 33.6
Series 5 L25 C10 20 12.0 4.8 31.2
G2
Series 6 L10 C10 15 3.4 3.4 27.2
51 -Series 7 L20 C5 15 6.8 1.7 25.5
Series 8 L20 C10 15 6.8 3.4 23.8
Series 9 L10 C20 15 3.4 6.8 23.8
G3
Series 10 L10 C10 15 3.4 3.4 27.2
32 19Series 11 L20 C10 15 6.8 3.4 23.8
Series 12 L10 C20 15 3.4 6.8 23.8
Physical and mechanical characteristics of hardened mixtures:
BATCH
Apparent densitya, [kg/m3]
Bending tensile strengthft, [N/mm2
Compressive strengthfc, [N/mm2]
7 days age 28 days age 7 days age 28 days age 7 days age 28 days age
Series 1 L10 C10 1855 1762 4.42 2.76 19.76 30.01
Series 2 L20 C5 1813 1766 3.61 1.87 15.75 28.91
Series 3 L20 C10 1853 1773 4.07 2.50 19.28 32.56
Series 4 L10 C20 1850 1780 3.01 2.57 19.33 32.43
Series 5 L25 C10 1840 1790 3.63 1.98 17.05 30.01
Series 6 L10 C10 2017 1987 4.36 3.51 16.44 24.26
Series 7 L20 C5 1965 1940 3.06 3.40 12.63 24.93
Series 8 L20 C10 1989 1896 3.69 3.21 14.51 27.29
Series 9 L10 C20 1938 1839 3.92 3.28 14.43 28.17
Series 10 L10 C10 1932 1822 2.90 2.92 11.80 19.01
Series 11 L20 C10 1920 1805 2.35 2.57 11.85 22.75
Series 12 L10 C20 1906 1820 3.27 3.04 15.66 27.83
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA MATERIALS SUSTAINABILITYMATERIALS SUSTAINABILITY
SUSTAINABILITY:
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA MATERIALS SUSTAINABILITYMATERIALS SUSTAINABILITY
SUSTAINABILITY:
Environmental 40%
Economic 30%
Social 30%
Embodied energy (CO2 emission)
70p
Cost of operation and maintenance
35p
Protection of health
25p
Recycled material 10p
Erection time 30p
Comfort25p
Waste, dust and noise 10p
Long service life 25p
Structure safety 25p
Land use 10p
Recycled material 10p
Architectural adaptability
25p
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
The technical efficiency:
x100xC1
x100CR
1 λβ The thermal
efficiency:
x100Cfc
2 βThe economical efficiency:
a
c3
fρ
β
Energetic sustainability index: E
ES
R
1
)ff
0.15RR
(0.15CC
0.3EE
0.4S Rc
cR
RR
SUSTAINABILITY INDEX:
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
1.16
62.23
46.92
57.50
45.23
56.77
41.85
9.26
33.33
0.992.84 2.912.922.753.003.202.232.482.422.672.96
10.80
25.00
3.39 8.10
50.00
45.06
52.5052.42
54.3556.23
55.1554.13
8.93
5.88
11.04
15.2912.60
10.43
15.32
14.3912.8512.2116.77
18.2218.36
16.37
17.03
0.0
10.0
20.0
30.0
40.0
50.0
60.0S
eri
es
1
Se
rie
s 2
Se
rie
s 3
Se
rie
s 4
Se
rie
s 5
Se
rie
s 6
Se
rie
s 7
Se
rie
s 8
Se
rie
s 9
Se
rie
s 1
0
Se
rie
s 1
1
Se
rie
s 1
2
C 1
6/2
0
So
lid B
rick
Ce
ll co
ncr
ete
Re
f. M
at.
Eff
icie
ncy In
dex
Thermal Efficiency Economical Efficiency Technical Efficiency
Fig.1 Technical, Thermal and Economical efficiency
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
0.72
0.60
0.51 0.520.44
0.86
0.74
0.630.67
0.92
0.65 0.67
0.33
0.16
0.36
1.00
0.0
0.2
0.4
0.6
0.8
1.0
Serie
s 1
Serie
s 2
Serie
s 3
Serie
s 4
Serie
s 5
Serie
s 6
Serie
s 7
Serie
s 8
Serie
s 9
Serie
s 10
Serie
s 11
Serie
s 12
C 1
6/20
Solid
Bric
k
Cel
l con
cret
e
Ref
. Mat
.
Ener
getic
sus
tena
bilit
y, S
1
Energetic sustainability of Reference Materials and new materials
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Sustainability Index of Reference Materials and new materials
0.78
0.700.67 0.68
0.61
0.820.76
0.710.75
0.82
0.690.74
0.53
0.27
0.48
1.00
0.0
0.2
0.4
0.6
0.8
1.0
Serie
s 1
Serie
s 2
Serie
s 3
Serie
s 4
Serie
s 5
Serie
s 6
Serie
s 7
Serie
s 8
Serie
s 9
Serie
s 10
Serie
s 11
Serie
s 12
C 1
6/20
Solid
Bric
k
Cel
l con
cret
e
Ref
. Mat
.
Sust
enab
ility
Inde
x, S
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
CONCRETES SUSTAINABILITY:
MaterialOrdinary concrete SCC
Composition [kg/m3]
Price[€/m3]
Composition [kg/m3]
Price[€/m3]
Cement CEM I 42,5 R 405.9 38.09 477.2 44.8Limestone filler 91 5.4 - Silica fume - - 53.5 78Fly ash - - 53.5 50Fine aggregate
0/4 mm river - - 987.3 580/4 mmcrushed
839.8 40 - -
Coarse aggregate
4/8 mmcrushed
447.9 27 - -
4/8mm river 526.5 31
Super-plasticizer
GLENIUM ACE 30
6.1(1.5% from cement)
6 7.2(1.5% from cement) VISCOCRETE
7
Water 367.4 0.5 198.8 0.2W/C 0.905 - 0.416 -
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
SUSTAINABILITY:
ORDINARY CONCRETE:
SELF COMPACTING CONCRETE:
685.03.03.04.02
21
OC
UHPC
OC
UHPC
OC
UHPC
Noise
Noise
Cost
Cost
CO
COS
740.03.03.04.02
22
SCC
UHPC
SCC
UHPC
SCC
UHPC
Noise
Noise
Cost
Cost
CO
COS
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
CONCRETE ELEMENTS DURABILITY: CARBONATION
PROFESSOR C. BOB FORMULAINITIAL PERIOD
- average depth of carbonation or chloride penetration, mm; - concrete compressive strength, N/mm2; - time of CO2 or/and Cl- action, years;
Numerical values of c, k and d:Carbonation process Chloride ion penetration
c - cement type - CEM c - cement type - CEM
Cement
I 52,5
(R)
I 42,5
(R)
II A-S32,5R
II B III A Cement I 42,5-I52,5
II A-S32,5R II B III A
c 0.8 1.0 1.2 1.4 2.0 c 1.00 0.90 0.75 0.67k - environmental conditions k - environmental conditions
Environmental conditions
Indoor
OutdoorWet concrete Environmental conditions Value of k = k1 · k2Protect
edAverag
e
RH, % ≤ 60 70-75 80-85 > 90 Temp
0C 0-5 5-15 15-25 25-35 35-45
k10.67 0.75 1.00 1.25 1.50
k 1.0 0.7 0.5 0.3 RH% 50 85 100
k2 0.75 1.00 0.75
d – concentration of CO2 d – concentration of chloride ion
CO2 in% 0.03 0.10 % of surface
concentration0% in front 20% 50% 65
% 85%g/m3 0.36 1.20
d 1.00 2.00 d 2.00 1.00 0.50 0.33 0.16
tf
dkc150x
c
_
cf
t
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Clay bond for masonry:
BatchWater Lime Cement Saw
dustClay
bond
[%] [%] [%] [%] [%]
Series 1 C10 30 0 8 0 72
Series 2 C15 SD5 30 0 7 3,5 59.5
Seres 3 C10 SD5 30 0 10 3,5 56.5
Series 4 C10 SD5 25 0 10 3,5 61.5
Series 5 L15 SD5 25 10 0 3,5 61.5
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Clay bond
No. crt. BATCH
a,
[kg/m3]fc,
[N/mm2]
7 zile 7 zile
1. Series 1C10 1149 1,34
2. Series 2C15 SD5 1229 1,38
3. Series 3C10 SD5 1259 1,56
4. Series 4C10 SD5 1323 2,19
5. Series 5L15 SD5 1259 1,25
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
SAW DUST
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
CLAY BOND SOIL
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
UNIVERSITY POLITEHNICA OF TIMISOARA UNIVERSITY POLITEHNICA OF TIMISOARA BUILDING MATERIALS WITH INDUSTRIAL WASTEBUILDING MATERIALS WITH INDUSTRIAL WASTE
Politehnica University of TimişoaraBuildings Faculty
Civil Engineering and Installations Department
THEORETICAL CONSIDERATIONS AND LAB DETERMINATIONS REGARDING CONCRETE SHRINKAGE
1.Theoretical considerations upon drying shrinkage of concrete
The main factors that influence the size of drying shrinkage process are:-The aggregates used in the concrete -The water content-The building elements dimensionsThe cement characteristics have a little or no
influence upon concrete shrinkage
• The long period of shrinkage development in the concrete elements having a big volume/surface ratio, it can be computed (CEB-FIB, 1990) by use of the following relationship:
000, tttt ssss s0 = 1 x 2
1
2
h0
s
t
t0
- initial shrinkage coefficient;
- factor which depends on the enviroment;
- factor which depends on h0;
- thickness coefficient , depends on the elements dimension and enviromental humidity;
- factor of shrinkage time evolution, depends on h0;
- concretes age;
- the age at which the contretes drying started.
2. Used shrinkage admixtures
The experimental tests were based on establishing the optimum utilisation procentage of three different additives for shrinkage reducing of the hardened concrete; also the optimisation of the compositions and manufacturing technology for these types of concretes, by using the products and materials tipically for our country
•The tested additives were:
•SR - 2 it is an superior alchool base admixture,the recomanded dosage it is (0,5 – 3,0) % from C
•ECLIPSE the recomanded dosage it is (1,0–2,5) % from C
•FM 40 the recomanded dosage it is (0,2 – 2,5) % from C
3. Characteristic shrinkage and cracking index
1.) - Characteristic shrinkage, eguals to the ratio between the shrinkage presented by the concrete element and its compression strength determined on cubic samples with l=15 cm, at 28 days.
=
For building elements, when has the smallest values, the admixtures efficiency it should be considered bigger.
c
cf
ε
Nm2
on
Characteristic shrinkage – admixture percentage
• 2.) γ – cracking index equals to the ratio between the effort which is present into concrete element and its bending tensile strength determined on standard prisms at 28 days.
γ =
• It will be considered that the concrete element will crack if γ 1.
ctfσ
γ= ct
cfεE
Cracking index γ – admixture percentage
0
1
2
3
4
5
6
7
8
1,5 1,6 1,7 1,8 1,9 2 2,1 2,2 2,3 2,4
Admixture percentage
Cra
ck
ing
in
de
x
Eclipse
SR - 2
FM 40
Martor
• Introducing the two new coefficients, - characteristic shrinkage and γ – cracking index, one should can estimate accuratly yhe cracking tendency of a hardened concrete, taking into account its mechanical strengths. This manner is of useful hand when designing concrete structures and also for estimations regarding to the durability of such structures.
By mean of these coefficients, - characteristic shrinkage and γ – cracking index, it can also be established the efficiency of an admixture in shrinkage reduction, leading to an optimisation of shrinkage reduced concretes composition.Taking into account these two coefficients, it is proposed, as future work, the writing of provizory instructions for the compositions of shrinkage reduced concretes.
Thank You for Your Attention!