masonry. build in style Lightweight, Loadbearing and Fire Rate Block System Australite TM
100mm Core holes are spaced at 200mm centres300mm*
Corner
10.34 may be added for extra stabilitySteel bars
30.9320.96
Starter bar spacing to engineers details (usually 400mm)
10-04 may be added for extra support to next course
100
20.96
Starter bar spacing to engineers details (usually 400mm)
10-03 required to make up wall width
100
10-04
30.93
10.34
10.03 must be added to make up wall thickness
20.96
20.96
200mm Clean-out Course for 20.91
masonry. build in style
Lightweight, Loadbearing
and Fire Rate Block System
Australite
AM57
59 B
ROW
NIN
K
The product images in our brochures give a general indication of colour for your preliminary selection. We recommend you also view current product samples before making your final selection. Printed July 2013.
www.australmasonry.com.au
A division of
1300 MASONRY (1300 627 667)
www.australmasonry.com.au
Austral Masonry National Offices
New South Wales 44 Clunies Ross Street Prospect NSW 2148
PO Box 6137 Seven Hills BC NSW 2147
Tel +61 2 9840 2333 Fax +61 2 9840 2344
[email protected] [email protected]
Victoria 59 Elliott Road Dandenong VIC 3175
PO Box 4068 Dandenong South VIC 3164
Tel +61 3 9791 6988 Fax +61 3 9791 1644
Queensland 184 Burnside Road Ormeau QLD 4208
PO Box 502 Beenleigh QLD 4207
Tel +61 7 3441 7500 Fax +61 7 3807 7033
Austral Masonry AustraliteTM Range
Retaining Wall Details20.421 and 20.48 Clean-out Course and Starter Bar Spacing
Core Spaces at Ends and Corners for 20.91/30.91 systems
Corner Details
300mm200mm blocks maintain bond without special blocks other than 20.92
Approximate Material Quantities for 1m3 of Mortar• There are 12.5 full blocks per square metre of wall surface area.
• Approximately 1m3 of mortar mix (allowing for wastage) is required for every 800 to 1200 blocks.
Core Fill Quantities
Block Type No. Blocks Filled per m3 of concrete grout15.42 19015.91 17520.42 12020.142 12520.91 10020.48 10030.91 65
Grey Block Grey Block
M3
Mix in 1:1:6 proportions Mix in 1:5 proportionsCement: 7 bags (40kg each) Cement: 8 bags (40kg each)
Lime: 5 bags (40kg each)Methyl cellulose (to suppliers instruction)
8 litres
Sand: 1.7 tonnes Sand: 1.7 tonnes
M4
Mix in 1:0.5:4.5 proportions Mix in 1:4 proportions
Cement: 9 bags (40kg each) Cement: 10 bags (40kg each)
Lime: 3 bags (40kg each)Methyl cellulose (to suppliers instruction)
10 litres
Sand: 1.7 tonnes Sand: 1.7 tonnes
30.48 Clean-out Course and Starter Bar Spacing
1. Stock colours and textures Blocks are available in Smooth or Split Face finishes in nominal 90 or 190mm thicknesses. All series 140 coloured blocks are made to order and a surcharge may apply. Part sizes are cut on site. A surcharge applies to orders less than the set minimum quantity.
2. Textures Finishes including Honing, Polishing and Shot-blasted are produced on a “made to order” basis. Lead times apply as the product must be cured for four weeks to harden sufficiently before processing. Contact your nearest Austral Masonary office for approximate lead times and premiums on special textured finishes.
3. Colour and texture variation The supply of raw materials can vary over time. In addition, variation can occur between product types and production batches.
4. We reserve the right to change the details in this publication without notice.
5. For a full set of Terms and Conditions of Sale please contact your nearest Austral Masonry sales office.
300mm Clean-out Course for 30.91
10.34
10.3420.92
20.92
15.0315.01
15.0115.01
15.22
15.01
15.0115.22
10.0310.01
10.0110.02
10.0110.02
10.0110.01
TM
200mm Cleanout course for 20.91
Blockwork Product Guide
10.01 10.02 10.03 10.34 10.12 Full Three Quarters Half Quarter Lintel or Bond Beam 9.5 kg 6.1 kg 4.3 kg 2.7 kg 9.0 kg 180 per pallet 240 per pallet 360 per pallet 432 per pallet 180 per pallet
10.83 10.31 Half High Solid Solid 5.2 kg 12.4 kg 288 per pallet 144 per pallet 10MPa
15.01 15.02 15.03 15.22 15.49 15.12 Full Three Quarters Half Corner Open End Lintel or Bond Beam 10 kg 7.7 kg 5.2 kg 9.0 kg 9.6 kg 12.4 kg 144 per pallet 160 per pallet 252 per pallet 135 per pallet 144 per pallet 120 per pallet 2hour when filled 2hour when filled
15.83 15.421* 15.91 15.48 15.401 Acousticell (15AC) Half High Solid Recessed Web Stretcher ‘H’ Block 4 hour insulation FRL Full 8.6 kg 9.8 kg 9.4 kg 9.8kg 15.5 kg (Made to Order) 192 per pallet 144 per pallet 144 per pallet 144per pallet 120 per pallet 10.8kg 2hour when filled 2hour filled 10MPa 120 per pallet
20.01 20.02 20.03 20.04 20.12 Full Three Quarters Half Quarter Lintel 11.6 kg 8.7 kg 6.8 kg 4.3 kg 16.4 kg 108 per pallet 120 per pallet 180 per pallet 360 per pallet 90 per pallet
20.71 50.31 20.401 Half High Capping 4 hour insulation FRL 5.9 kg 5.3 kg 13 kg 216 per pallet 160 per pallet 90 per pallet 10M
20.421* 20.91 20.48 20.93 20.92 20.96 + 10.34 Recessed Web Stretcher “H” Block Half End Corner & End (Sold Separately) 11.4 kg 11.2 kg 10.5kg 7.3 kg 11.4 kg Clean Out 108 per pallet 108 per pallet 108 per pallet 180 per pallet 108 per pallet 11.4 kg 4hour filled 4hour filled 4hour filled 108 & 432 per pallet
30.91 30.48 30.93 30.92 20.96 + 10.03 20.49 Stretcher ‘H’ Block Half End End (Sold Separately) Open end 13.6 kg 14kg 8.7 kg 16.8 kg Clean Out 11.4 kg 72 per pallet 72per pallet 120 per pallet 60 per pallet 15.7 kg 108 per pallet 4hour filled 4hour filled 108 and 360 per pallet
10.101 10.109* Full Half High 13.9 kg (Made to order) 144 per pallet 7.2 kg 1 core is deleted 288 per pallet from 1 in 3 blocks for splitting corners
10.01 15.01* 15.42* Full Made to order Made to order 11.1 kg Full Recessed Web 180 per pallet 15.0 kg 15.0 kg 120 per pallet 120 per pallet
20.01 20.42 Note: Smoothface Full Recessed Web 20.01 and 20.42 14.8 kg 14.2 kg are sold on 1 pallet 90 per pallet 90 per pallet (1 pallet = 90 blocks made up of 75 x 20.42 and 15 x 20.01) Product code 20.421
50.31 Capping
Size (mm) 230 x 110 x 76 290 x 90 x 162 230 x 110 x 162
Code Common 90162LSG 11.162SG
Weight (kg) 3.15 5.4 6.2
Units per square 48.5 19.40 24.20
Durability EXP EXP EXP
Characteristic unconfined compressive strength ƒ˙uc
≥12MPa ≥10MPa ≥12MPa
# per pallet 400 288 300
FRL 90/90/90 90/90/90 90/90/90
Rendered 10mm both fares 120/120/120 120/120/120 120/120/120
AustraliteTM Smooth Faced BlocksAll available in Standard Grey (Note colour variations may occur between part sizes and full length blocks)
100mm Series {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
150mm Series {ƒ˙uc = 15MPa unless noted) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
200mm Series {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
AustraliteTM Smooth Faced BlocksAll available in Standard Grey (Note colour variations may occur between part sizes and full length blocks)
200mm Series Retaining Wall Units {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
300mm Series Retaining Wall Units {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
Architec Designer MasonryTM
Colours, Alabaster, Almond, Charcoal and Pearl GreySplit Face {ƒ˙uc = 15MPa)
Fire Light (FL)
120 minute insulation FRL, ƒ˙uc 4MPa
Concrete Commons
15.121* 15.142* Full Recessed Web (Made to order) (Made to order) 16.6 kg 15.5 kg 120 per pallet 120 per pallet 1 core is deleted from 1 in 4 blocks for splitting corners
20.121 20.142 Full Recessed Web 17.7 kg 17.0 kg 90 per pallet 90 per pallet
11.162FL 4.5 kg 24.2 per m2 300 per pallet
Colours, Alabaster, Almond, Charcoal and Pearl GreySmooth, Shot-Blast, Honed and Polished {ƒ˙uc = 15MPa)
All these products are available in Honed, Shot-Blast or Polished finish. For corner applications, these products are available with the face and one end Honed. Shot-Blasted or Polished. Lead times apply.
*Note: 1 pallet contains 108 blocks = 90 off 20.42 and 18 off 20.01 Product code: 20.421
290390
190
120mm Series 2 hour insulation FRL
12.01 Full 8.8 kg 150 per pallet 15MPa
*Note: 1 pallet contains 144 blocks = 108 off 15.42 and 36 off 15.01 Product code: 15.421
Coloured smooth and split face blocks sold in full pallets only.
12.01 FL Full 7.5 kg 150 per pallet 4MPa
110390
190
390
190
140
190390
190
90390
190
90290
190
90190
190
90 90
190
90
390
190
90
390
90
90
390
190
140
390
190
140290
190
140 190
190
140390
90
140340
190
140
390
190
140390
190
140390
190
140390
190
140390
190
140390
190
190390
190
190290
190
190 190
190
190 90
190
190390
190
190390
90
194390
40
190390
190
190390
190
190390
190
33
190
190190 190390
190
190
390190
Optional
290 390
190
290190
190
290 390
190
90
390
190
190
190
190
95
390
190
95
390
90
145390
190
145390
190
195390
190
195 390
190
110230
162
90
390
190
140
390
190
140390
190
190390
190
190390
190
194390
40
110230
76
Made to order110 230
162
190390
190
110390
190
Made to order90
290
162
Blockwork Product Guide
10.01 10.02 10.03 10.34 10.12 Full Three Quarters Half Quarter Lintel or Bond Beam 9.5 kg 6.1 kg 4.3 kg 2.7 kg 9.0 kg 180 per pallet 240 per pallet 360 per pallet 432 per pallet 180 per pallet
10.83 10.31 Half High Solid Solid 5.2 kg 12.4 kg 288 per pallet 144 per pallet 10MPa
15.01 15.02 15.03 15.22 15.49 15.12 Full Three Quarters Half Corner Open End Lintel or Bond Beam 10 kg 7.7 kg 5.2 kg 9.0 kg 9.6 kg 12.4 kg 144 per pallet 160 per pallet 252 per pallet 135 per pallet 144 per pallet 120 per pallet 2hour when filled 2hour when filled
15.83 15.421* 15.91 15.48 15.401 Acousticell (15AC) Half High Solid Recessed Web Stretcher ‘H’ Block 4 hour insulation FRL Full 8.6 kg 9.8 kg 9.4 kg 9.8kg 15.5 kg (Made to Order) 192 per pallet 144 per pallet 144 per pallet 144per pallet 120 per pallet 10.8kg 2hour when filled 2hour filled 10MPa 120 per pallet
20.01 20.02 20.03 20.04 20.12 Full Three Quarters Half Quarter Lintel 11.6 kg 8.7 kg 6.8 kg 4.3 kg 16.4 kg 108 per pallet 120 per pallet 180 per pallet 360 per pallet 90 per pallet
20.71 50.31 20.401 Half High Capping 4 hour insulation FRL 5.9 kg 5.3 kg 13 kg 216 per pallet 160 per pallet 90 per pallet 10M
20.421* 20.91 20.48 20.93 20.92 20.96 + 10.34 Recessed Web Stretcher “H” Block Half End Corner & End (Sold Separately) 11.4 kg 11.2 kg 10.5kg 7.3 kg 11.4 kg Clean Out 108 per pallet 108 per pallet 108 per pallet 180 per pallet 108 per pallet 11.4 kg 4hour filled 4hour filled 4hour filled 108 & 432 per pallet
30.91 30.48 30.93 30.92 20.96 + 10.03 20.49 Stretcher ‘H’ Block Half End End (Sold Separately) Open end 13.6 kg 14kg 8.7 kg 16.8 kg Clean Out 11.4 kg 72 per pallet 72per pallet 120 per pallet 60 per pallet 15.7 kg 108 per pallet 4hour filled 4hour filled 108 and 360 per pallet
10.101 10.109* Full Half High 13.9 kg (Made to order) 144 per pallet 7.2 kg 1 core is deleted 288 per pallet from 1 in 3 blocks for splitting corners
10.01 15.01* 15.42* Full Made to order Made to order 11.1 kg Full Recessed Web 180 per pallet 15.0 kg 15.0 kg 120 per pallet 120 per pallet
20.01 20.42 Note: Smoothface Full Recessed Web 20.01 and 20.42 14.8 kg 14.2 kg are sold on 1 pallet 90 per pallet 90 per pallet (1 pallet = 90 blocks made up of 75 x 20.42 and 15 x 20.01) Product code 20.421
50.31 Capping
Size (mm) 230 x 110 x 76 290 x 90 x 162 230 x 110 x 162
Code Common 90162LSG 11.162SG
Weight (kg) 3.15 5.4 6.2
Units per square 48.5 19.40 24.20
Durability EXP EXP EXP
Characteristic unconfined compressive strength ƒ˙uc
≥12MPa ≥10MPa ≥12MPa
# per pallet 400 288 300
FRL 90/90/90 90/90/90 90/90/90
Rendered 10mm both fares 120/120/120 120/120/120 120/120/120
AustraliteTM Smooth Faced BlocksAll available in Standard Grey (Note colour variations may occur between part sizes and full length blocks)
100mm Series {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
150mm Series {ƒ˙uc = 15MPa unless noted) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
200mm Series {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
AustraliteTM Smooth Faced BlocksAll available in Standard Grey (Note colour variations may occur between part sizes and full length blocks)
200mm Series Retaining Wall Units {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
300mm Series Retaining Wall Units {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
Architec Designer MasonryTM
Colours, Alabaster, Almond, Charcoal and Pearl GreySplit Face {ƒ˙uc = 15MPa)
Fire Light (FL)
120 minute insulation FRL, ƒ˙uc 4MPa
Concrete Commons
15.121* 15.142* Full Recessed Web (Made to order) (Made to order) 16.6 kg 15.5 kg 120 per pallet 120 per pallet 1 core is deleted from 1 in 4 blocks for splitting corners
20.121 20.142 Full Recessed Web 17.7 kg 17.0 kg 90 per pallet 90 per pallet
11.162FL 4.5 kg 24.2 per m2 300 per pallet
Colours, Alabaster, Almond, Charcoal and Pearl GreySmooth, Shot-Blast, Honed and Polished {ƒ˙uc = 15MPa)
All these products are available in Honed, Shot-Blast or Polished finish. For corner applications, these products are available with the face and one end Honed. Shot-Blasted or Polished. Lead times apply.
*Note: 1 pallet contains 108 blocks = 90 off 20.42 and 18 off 20.01 Product code: 20.421
290390
190
120mm Series 2 hour insulation FRL
12.01 Full 8.8 kg 150 per pallet 15MPa
*Note: 1 pallet contains 144 blocks = 108 off 15.42 and 36 off 15.01 Product code: 15.421
Coloured smooth and split face blocks sold in full pallets only.
12.01 FL Full 7.5 kg 150 per pallet 4MPa
110390
190
390
190
140
190390
190
90390
190
90290
190
90190
190
90 90
190
90
390
190
90
390
90
90
390
190
140
390
190
140290
190
140 190
190
140390
90
140340
190
140
390
190
140390
190
140390
190
140390
190
140390
190
140390
190
190390
190
190290
190
190 190
190
190 90
190
190390
190
190390
90
194390
40
190390
190
190390
190
190390
190
33
190
190190 190390
190
190
390190
Optional
290 390
190
290190
190
290 390
190
90
390
190
190
190
190
95
390
190
95
390
90
145390
190
145390
190
195390
190
195 390
190
110230
162
90
390
190
140
390
190
140390
190
190390
190
190390
190
194390
40
110230
76
Made to order110 230
162
190390
190
110390
190
Made to order90
290
162
Blockwork Product Guide
10.01 10.02 10.03 10.34 10.12 Full Three Quarters Half Quarter Lintel or Bond Beam 9.5 kg 6.1 kg 4.3 kg 2.7 kg 9.0 kg 180 per pallet 240 per pallet 360 per pallet 432 per pallet 180 per pallet
10.83 10.31 Half High Solid Solid 5.2 kg 12.4 kg 288 per pallet 144 per pallet 10MPa
15.01 15.02 15.03 15.22 15.49 15.12 Full Three Quarters Half Corner Open End Lintel or Bond Beam 10 kg 7.7 kg 5.2 kg 9.0 kg 9.6 kg 12.4 kg 144 per pallet 160 per pallet 252 per pallet 135 per pallet 144 per pallet 120 per pallet 2hour when filled 2hour when filled
15.83 15.421* 15.91 15.48 15.401 Acousticell (15AC) Half High Solid Recessed Web Stretcher ‘H’ Block 4 hour insulation FRL Full 8.6 kg 9.8 kg 9.4 kg 9.8kg 15.5 kg (Made to Order) 192 per pallet 144 per pallet 144 per pallet 144per pallet 120 per pallet 10.8kg 2hour when filled 2hour filled 10MPa 120 per pallet
20.01 20.02 20.03 20.04 20.12 Full Three Quarters Half Quarter Lintel 11.6 kg 8.7 kg 6.8 kg 4.3 kg 16.4 kg 108 per pallet 120 per pallet 180 per pallet 360 per pallet 90 per pallet
20.71 50.31 20.401 Half High Capping 4 hour insulation FRL 5.9 kg 5.3 kg 13 kg 216 per pallet 160 per pallet 90 per pallet 10M
20.421* 20.91 20.48 20.93 20.92 20.96 + 10.34 Recessed Web Stretcher “H” Block Half End Corner & End (Sold Separately) 11.4 kg 11.2 kg 10.5kg 7.3 kg 11.4 kg Clean Out 108 per pallet 108 per pallet 108 per pallet 180 per pallet 108 per pallet 11.4 kg 4hour filled 4hour filled 4hour filled 108 & 432 per pallet
30.91 30.48 30.93 30.92 20.96 + 10.03 20.49 Stretcher ‘H’ Block Half End End (Sold Separately) Open end 13.6 kg 14kg 8.7 kg 16.8 kg Clean Out 11.4 kg 72 per pallet 72per pallet 120 per pallet 60 per pallet 15.7 kg 108 per pallet 4hour filled 4hour filled 108 and 360 per pallet
10.101 10.109* Full Half High 13.9 kg (Made to order) 144 per pallet 7.2 kg 1 core is deleted 288 per pallet from 1 in 3 blocks for splitting corners
10.01 15.01* 15.42* Full Made to order Made to order 11.1 kg Full Recessed Web 180 per pallet 15.0 kg 15.0 kg 120 per pallet 120 per pallet
20.01 20.42 Note: Smoothface Full Recessed Web 20.01 and 20.42 14.8 kg 14.2 kg are sold on 1 pallet 90 per pallet 90 per pallet (1 pallet = 90 blocks made up of 75 x 20.42 and 15 x 20.01) Product code 20.421
50.31 Capping
Size (mm) 230 x 110 x 76 290 x 90 x 162 230 x 110 x 162
Code Common 90162LSG 11.162SG
Weight (kg) 3.15 5.4 6.2
Units per square 48.5 19.40 24.20
Durability EXP EXP EXP
Characteristic unconfined compressive strength ƒ˙uc
≥12MPa ≥10MPa ≥12MPa
# per pallet 400 288 300
FRL 90/90/90 90/90/90 90/90/90
Rendered 10mm both fares 120/120/120 120/120/120 120/120/120
AustraliteTM Smooth Faced BlocksAll available in Standard Grey (Note colour variations may occur between part sizes and full length blocks)
100mm Series {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
150mm Series {ƒ˙uc = 15MPa unless noted) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
200mm Series {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
AustraliteTM Smooth Faced BlocksAll available in Standard Grey (Note colour variations may occur between part sizes and full length blocks)
200mm Series Retaining Wall Units {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
300mm Series Retaining Wall Units {ƒ˙uc = 15MPa) 2 hour insulation FRL on standard grey blocks unless otherwise specified.
Architec Designer MasonryTM
Colours, Alabaster, Almond, Charcoal and Pearl GreySplit Face {ƒ˙uc = 15MPa)
Fire Light (FL)
120 minute insulation FRL, ƒ˙uc 4MPa
Concrete Commons
15.121* 15.142* Full Recessed Web (Made to order) (Made to order) 16.6 kg 15.5 kg 120 per pallet 120 per pallet 1 core is deleted from 1 in 4 blocks for splitting corners
20.121 20.142 Full Recessed Web 17.7 kg 17.0 kg 90 per pallet 90 per pallet
11.162FL 4.5 kg 24.2 per m2 300 per pallet
Colours, Alabaster, Almond, Charcoal and Pearl GreySmooth, Shot-Blast, Honed and Polished {ƒ˙uc = 15MPa)
All these products are available in Honed, Shot-Blast or Polished finish. For corner applications, these products are available with the face and one end Honed. Shot-Blasted or Polished. Lead times apply.
*Note: 1 pallet contains 108 blocks = 90 off 20.42 and 18 off 20.01 Product code: 20.421
290390
190
120mm Series 2 hour insulation FRL
12.01 Full 8.8 kg 150 per pallet 15MPa
*Note: 1 pallet contains 144 blocks = 108 off 15.42 and 36 off 15.01 Product code: 15.421
Coloured smooth and split face blocks sold in full pallets only.
12.01 FL Full 7.5 kg 150 per pallet 4MPa
110390
190
390
190
140
190390
190
90390
190
90290
190
90190
190
90 90
190
90
390
190
90
390
90
90
390
190
140
390
190
140290
190
140 190
190
140390
90
140340
190
140
390
190
140390
190
140390
190
140390
190
140390
190
140390
190
190390
190
190290
190
190 190
190
190 90
190
190390
190
190390
90
194390
40
190390
190
190390
190
190390
190
33
190
190190 190390
190
190
390190
Optional
290 390
190
290190
190
290 390
190
90
390
190
190
190
190
95
390
190
95
390
90
145390
190
145390
190
195390
190
195 390
190
110230
162
90
390
190
140
390
190
140390
190
190390
190
190390
190
194390
40
110230
76
Made to order110 230
162
190390
190
110390
190
Made to order90
290
162
100mm Core holes are spaced at 200mm centres300mm*
Corner
10.34 may be added for extra stabilitySteel bars
30.9320.96
Starter bar spacing to engineers details (usually 400mm)
10-04 may be added for extra support to next course
100
20.96
Starter bar spacing to engineers details (usually 400mm)
10-03 required to make up wall width
100
10-04
30.93
10.34
10.03 must be added to make up wall thickness
20.96
20.96
200mm Clean-out Course for 20.91
masonry. build in style
Lightweight, Loadbearing
and Fire Rate Block System
Australite
AM57
59 B
ROW
NIN
K
The product images in our brochures give a general indication of colour for your preliminary selection. We recommend you also view current product samples before making your final selection. Printed July 2013.
www.australmasonry.com.au
A division of
1300 MASONRY (1300 627 667)
www.australmasonry.com.au
Austral Masonry National Offices
New South Wales 44 Clunies Ross Street Prospect NSW 2148
PO Box 6137 Seven Hills BC NSW 2147
Tel +61 2 9840 2333 Fax +61 2 9840 2344
[email protected] [email protected]
Victoria 59 Elliott Road Dandenong VIC 3175
PO Box 4068 Dandenong South VIC 3164
Tel +61 3 9791 6988 Fax +61 3 9791 1644
Queensland 184 Burnside Road Ormeau QLD 4208
PO Box 502 Beenleigh QLD 4207
Tel +61 7 3441 7500 Fax +61 7 3807 7033
Austral Masonry AustraliteTM Range
Retaining Wall Details20.421 and 20.48 Clean-out Course and Starter Bar Spacing
Core Spaces at Ends and Corners for 20.91/30.91 systems
Corner Details
300mm200mm blocks maintain bond without special blocks other than 20.92
Approximate Material Quantities for 1m3 of Mortar• There are 12.5 full blocks per square metre of wall surface area.
• Approximately 1m3 of mortar mix (allowing for wastage) is required for every 800 to 1200 blocks.
Core Fill Quantities
Block Type No. Blocks Filled per m3 of concrete grout15.42 19015.91 17520.42 12020.142 12520.91 10020.48 10030.91 65
Grey Block Grey Block
M3
Mix in 1:1:6 proportions Mix in 1:5 proportionsCement: 7 bags (40kg each) Cement: 8 bags (40kg each)
Lime: 5 bags (40kg each)Methyl cellulose (to suppliers instruction)
8 litres
Sand: 1.7 tonnes Sand: 1.7 tonnes
M4
Mix in 1:0.5:4.5 proportions Mix in 1:4 proportions
Cement: 9 bags (40kg each) Cement: 10 bags (40kg each)
Lime: 3 bags (40kg each)Methyl cellulose (to suppliers instruction)
10 litres
Sand: 1.7 tonnes Sand: 1.7 tonnes
30.48 Clean-out Course and Starter Bar Spacing
1. Stock colours and textures Blocks are available in Smooth or Split Face finishes in nominal 90 or 190mm thicknesses. All series 140 coloured blocks are made to order and a surcharge may apply. Part sizes are cut on site. A surcharge applies to orders less than the set minimum quantity.
2. Textures Finishes including Honing, Polishing and Shot-blasted are produced on a “made to order” basis. Lead times apply as the product must be cured for four weeks to harden sufficiently before processing. Contact your nearest Austral Masonary office for approximate lead times and premiums on special textured finishes.
3. Colour and texture variation The supply of raw materials can vary over time. In addition, variation can occur between product types and production batches.
4. We reserve the right to change the details in this publication without notice.
5. For a full set of Terms and Conditions of Sale please contact your nearest Austral Masonry sales office.
300mm Clean-out Course for 30.91
10.34
10.3420.92
20.92
15.0315.01
15.0115.01
15.22
15.01
15.0115.22
10.0310.01
10.0110.02
10.0110.02
10.0110.01
TM
200mm Cleanout course for 20.91
100mm Core holes are spaced at 200mm centres300mm*
Corner
10.34 may be added for extra stabilitySteel bars
30.9320.96
Starter bar spacing to engineers details (usually 400mm)
10-04 may be added for extra support to next course
100
20.96
Starter bar spacing to engineers details (usually 400mm)
10-03 required to make up wall width
100
10-04
30.93
10.34
10.03 must be added to make up wall thickness
20.96
20.96
200mm Clean-out Course for 20.91
masonry. build in style
Lightweight, Loadbearing
and Fire Rate Block System
Australite
AM57
59 B
ROW
NIN
K
The product images in our brochures give a general indication of colour for your preliminary selection. We recommend you also view current product samples before making your final selection. Printed July 2013.
www.australmasonry.com.au
A division of
1300 MASONRY (1300 627 667)
www.australmasonry.com.au
Austral Masonry National Offices
New South Wales 44 Clunies Ross Street Prospect NSW 2148
PO Box 6137 Seven Hills BC NSW 2147
Tel +61 2 9840 2333 Fax +61 2 9840 2344
[email protected] [email protected]
Victoria 59 Elliott Road Dandenong VIC 3175
PO Box 4068 Dandenong South VIC 3164
Tel +61 3 9791 6988 Fax +61 3 9791 1644
Queensland 184 Burnside Road Ormeau QLD 4208
PO Box 502 Beenleigh QLD 4207
Tel +61 7 3441 7500 Fax +61 7 3807 7033
Austral Masonry AustraliteTM Range
Retaining Wall Details20.421 and 20.48 Clean-out Course and Starter Bar Spacing
Core Spaces at Ends and Corners for 20.91/30.91 systems
Corner Details
300mm200mm blocks maintain bond without special blocks other than 20.92
Approximate Material Quantities for 1m3 of Mortar• There are 12.5 full blocks per square metre of wall surface area.
• Approximately 1m3 of mortar mix (allowing for wastage) is required for every 800 to 1200 blocks.
Core Fill Quantities
Block Type No. Blocks Filled per m3 of concrete grout15.42 19015.91 17520.42 12020.142 12520.91 10020.48 10030.91 65
Grey Block Grey Block
M3
Mix in 1:1:6 proportions Mix in 1:5 proportionsCement: 7 bags (40kg each) Cement: 8 bags (40kg each)
Lime: 5 bags (40kg each)Methyl cellulose (to suppliers instruction)
8 litres
Sand: 1.7 tonnes Sand: 1.7 tonnes
M4
Mix in 1:0.5:4.5 proportions Mix in 1:4 proportions
Cement: 9 bags (40kg each) Cement: 10 bags (40kg each)
Lime: 3 bags (40kg each)Methyl cellulose (to suppliers instruction)
10 litres
Sand: 1.7 tonnes Sand: 1.7 tonnes
30.48 Clean-out Course and Starter Bar Spacing
1. Stock colours and textures Blocks are available in Smooth or Split Face finishes in nominal 90 or 190mm thicknesses. All series 140 coloured blocks are made to order and a surcharge may apply. Part sizes are cut on site. A surcharge applies to orders less than the set minimum quantity.
2. Textures Finishes including Honing, Polishing and Shot-blasted are produced on a “made to order” basis. Lead times apply as the product must be cured for four weeks to harden sufficiently before processing. Contact your nearest Austral Masonary office for approximate lead times and premiums on special textured finishes.
3. Colour and texture variation The supply of raw materials can vary over time. In addition, variation can occur between product types and production batches.
4. We reserve the right to change the details in this publication without notice.
5. For a full set of Terms and Conditions of Sale please contact your nearest Austral Masonry sales office.
300mm Clean-out Course for 30.91
10.34
10.3420.92
20.92
15.0315.01
15.0115.01
15.22
15.01
15.0115.22
10.0310.01
10.0110.02
10.0110.02
10.0110.01
TM
200mm Cleanout course for 20.91