Copyright ACI Operations Pty Ltd 2011. Not to be copied in whole or part without the prior written permission of ACI Operations Pty Ltd. This design drawing contains information which is confidential to ACI Operations Pty Ltd and must be used only as directed by ACI Operations Pty Ltd. This design drawing must not be disclosed to anyone without the prior written consent of ACI Operations Pty Ltd. Customer hereby indemnifies and holds ACI operations Pty Ltd ("ACI") harmless for any loss, damage or liability which ACI may incur if the design, manufacture and supply of the bottles in accordance with the instructions or requirements of customer infringes the intellectual property rights of any third party. SPECIFICATION AGREEMENTS ARE BASED ON TOLERANCED DIMENSIONS ONLY. DO NOT SCALE DRAWING. ALL DIMENSIONS ARE IN MILLIMETRES. AP_A2_WS_02 Pure Performance Packaging S A F E R E C Y C L A B L E S U S T A I N A B L E 15.4 Recommended max. label 191.3 330.0 #2.0 78.5 #1.6 212.0 4.6 71.4 #1.6 27.75 Punt 35.0 29.6 28.3 Contact 4.4 Bearing surface 62.3 63.0 12.8 3.0 DESIGN/CHECK REVISIONS DATE No CR Was 191.8. 30840-WS added to Note. Redrawn to latest format. 30 Mar 10 8 SJW/NB 05388-WS reference removed, Recycle logo added 23 Nov 11 9 MOULD/SAP NUMBER 05369 DRAWING NUMBER 05369-WS DATE CHECKED 30 Mar 10 DATE CR DESIGNER Stock 750ml Reverse Taper Claret DESIGN REFERENCE RETURNABLE NO PROCESS B&B MAX GAS VOLUME 0.0 FINISH DESIGNATION C001A Cork Mouth [GCM-39197] 748g CONTAINER WEIGHT 753.0ml # 5.6ml CONTAINER RATED CAPACITY ( FILLPOINT ) 772.0ml Nominal CONTAINER OVERFLOW CAPACITY ( BRIMFUL ) BRIMFUL VERIFIED YES MINIMUM THROUGH BORE 17.5 mm TILT ANGLE PREDICTED: 13.25 $ VERIFIED: 15.0 $ SURFACE TREATMENT PERMANENT VACUITY 2.5% SCALE 1:1 N.P.D. PROJECT NUMBER NPD-000224 A03 A01 PLANT MOULD EQUIPMENT ORDERED BY: N/A NNPB EQUIVALENT ASIA PACIFIC AUSTRALIA 36 Burwood Road Hawthorn VIC 3122 +61 3 9236 2311 Concept and Container Design Note: Refer to Glass Finish Specification for details of bore control. The fill point of this container is designed for a cork up to 50mm long. This container is manufactured with other finishes, refer 30840-WS. 753.0ml #5.6ml This container has a 18.5mm nominal bore to suit a table wine cork. OM-5 machine stipple in punt area. Recycle logo