Top Banner
Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate the audio mixer during the actual production. They must balance all audio levels including pre-recorded sounds (audio special effects, I pods, CD’s ) with the voice levels during the recording. They must also “strike the set” at the end and wrap up all cables, put mics away, take out batteries. Etc.
22

Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Dec 24, 2015

Download

Documents

Louisa Ward
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Audio Production

Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer

and then operate the audio mixer during the actual production. They must balance all audio levels including pre-recorded sounds (audio special effects, I pods, CD’s ) with the voice levels during the recording. They must also “strike the

set” at the end and wrap up all cables, put mics away, take out batteries. Etc.

Page 2: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Audio Terms: VU meter: an audio meter which

measures the intensity of sound in volume units. Could be a series of green lights that turn to red or an actual meter.

Acceptable level is 80 to 100% modulation with occasional peaks into

the red.

Page 3: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

What does a microphone do?

The mic is a transducer, in other words, an energy converter. It senses acoustical energy (sound) and translates it into

equivalent electrical energy.

Page 4: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Microphones have different Pick-up patterns:

• Audio pick up refers to how the microphone responds to sounds coming from different directions. There are two general types:

• Omni-directional: (all) the microphone will receive sounds from all sides equally without favoring sounds from any particular direction (angle)

• Uni-directional: (one) most sensitive to sounds emanating from one direction and to reject sounds coming from the rear and sides of the mic.

Page 5: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Pick up patterns:

Page 6: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Just as there are different pick-up patterns, there are also

different types of microphones

Lavalier (lapel) mic – can be clipped onto the lapel of a coat, shirt or a tie.

Omnidirectional . Good for studio interview

Page 7: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Parabolic micA parabolic microphone :uses a parabolic reflector to collect and focus sound waves onto a receiver, in much the same way that a parabolic antenna (e.g., satellite dish) does with radio waves. Typical uses of this microphone, which has unusually focused front sensitivity and can pick up sounds from many metres away, include nature recording, field audio for sports broadcasting, eavesdropping (and law enforcement.

Page 8: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Hand Held Microphones

• Good for interviews, omnidirectional, good for sounds that are close to the sound source and for videos that is it acceptable to see the microphone in the shot.

Page 9: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

BOOM mic

• Position the mic so that it is just out of camera range but where it can still pick up sound, most common is a hand held on a fish pole.

Page 10: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

PZM or boundary mic

• Sometimes called a “conference” mic, lays flat on a table and can be used when there are not enough inputs on the audio mixer for every person to have their own microphone.

• Good back – up mic for when you do not know what the format of the program will be and you do not know the order of the speakers.

Page 11: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Shot gun mic

• Can be used as a boom on a pole• Highly direction pick up pattern• It can pick up sounds from a distance

Page 12: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Wireless microphones

• A mic with a built in transmitter• Allows performer total freedom of movement

since there is no audio cable connected to the audio mixer

• Problem: Can be subject to interference from other microphones in the room or can have interference from signalsin the air

Page 13: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Tips for proper microphone techniques:

• When testing a mic, never tap or blow into it. Test by reading actual lines from your script.

• Check for the proper distance between your mouth and the mic and then keep it at that spot.

• Try not to rattle your script pages • Never whisper a cue, the mic picks up everything• Always assume your mic is on, be respectful of others in the

room• Always remove batteries from the mics when not in use,

unless there is an on/off switch. If there is a switch, you can turn the mic off to conserve battery power.

Page 14: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Audio connectors:

Page 15: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Follow up questions:

• If a microphone has a pick up pattern from only one direction, what is that pattern called?

Page 16: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Pattern:

Uni-directional Or ( one direction)

Page 17: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Pick up patterns

• If a microphone has a pick up pattern that picks up sound from many directions, what is that pattern called?

Page 18: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Answer: omni directional

Page 19: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Types of microphones:

If I am doing an interview in a studio situation and I have a host and a guest, I would most likely use what type of mic?

Page 20: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Answer:

• The best type of microphone would be a Lavalier ( clip on ) microphone . One for me and one for my guest.

Page 21: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Microphone types:

• If I wanted to go around the school and do a “man on the street” type of video, the best microphone to use would be:

Page 22: Audio Production Audio engineer: selects the proper microphones and places them on the set. They also set each level on the audio mixer and then operate.

Types of microphones:A hand held microphone or it is

sometimes called a stick mic.