Audio Line Monitor / WAL-402D, WAL-402A Precision Monitoring Bridge / MB-630 LED e-mail : si@ bronics.co.kr MICOM system operation 2 Digital & 2 Analog (stereo) Inputs 1 Analog (stereo) Line Output High quality 2 VU meter & speaker for line level monitoring • 1 Phase meter • 4 step Input level Attenuator Monitoring mode selector 2 Rack unit type • Digital Input Channel Impedance Sample rates Conversion Decodes 2CH AES/EBU 110 ohms balanced or 75 ohms unbalanced 30KHz to 100KHz 20 bit AES/EBU IEC 958 Analog Input Channel Impedance Level 2CH (stereo) 20 Kohms / 600 ohms balanced 4 step(-10, 0, +4, +8dB) Analog Output Channel Output Frequency response THD Signal to noise 1CH (stereo) +4dBu, NOR. ±0.5dB / 20Hz to 20KHz 0.2% -76dB(20Hz to 22KHz B.W) Digital 2CH + Analog 2CH L, R, Mono, Mute 10W Stereo Class- D 0 C to 40 C Free Voltage(AC 85~264V, 50/60Hz) 483(W) x 88(H) x 350(D)mm Input Select Mode Select Monitor Amp Operating temperature Power Dimensions Note : S pecifications are subject to change without notice Features Features Technical Specification Features Technical Specification Input Channel Impedance Level 4CH(stereo) 20 Kohms / 600 ohms balanced 4 step(-10, 0, +4, +8db) Output Channel Output Frequency response THD+N Signal to noise 1CH +4dBu, NOR. ±0.5dB, 20Hz to 20KHz 0.2% -76dB(20Hz to 22KHZ B.W) Mode select Monitor amp Operating temperature Power Dimensions Rear View WAL-402D Digital Audio Line Monitor Rear View Note : S pecifications are subject to change without notice WAL-402A Analog Audio Line Monitor Precision monitoring LED meters Inbuilt speaker (2) and Subwoofer VCA controlled output Phase display Audio monitoring of up to 16 channels Inputs C onnectors S ources 2 channel balanced Phoenix 3-way screw terminal connectors 75 ohm BNCs (for SDI, De-embedder and Analogue Video Options) 4x4 channel sources or 8x2 channel sources Outputs C onnectors Output Amplifiers Output S peakers 2 channel balanced Phoenix 3-way screw terminal connectors 3x 25w 2x 80mm magnetically shielded speakers(Left and Right) 1x magnetically shielded subwoofer Performance Meters Audio G ain Adjus tment 3x 48 High Performance LED (16x3 Colours) meters -10dBu or +4dBu nominal working level General R ear C onnertor External speakers. External amplifiers. Waveform displays Rear View MB -630 LE D P recision Monitoring B ridge Note : S pecifications are subject to change without notice WAL - 402D WAL - 402A Technical Specification MB - 630 LED MICOM system operation 4 Analog (stereo) Inputs 1 Analog (stereo) Line Output High quality 2 VU meter & speaker for line level monitoring • 1 Phase meter • 4 step Input level Attenuator Monitoring mode selector 2 Rack unit type • Analog 2CH (Stereo) Audio 입력과 Digital 입력을 수용하여 1개 채널 을 선택, 음량을 VU Meter와 스피커로 모니터함과 동시에 Line출력이 된다. 또한 위상 Meter도 있어 동위상 또는 역위상 확인이 가능하며 입력감도 설정을 4단계로 할 수 있다. MICOM을 장착 채널 1-4 선택시 Level ATT와 Mode 선택내용이 자동 으로 기억되어 선택된다. 본 장비는 4CH(Stereo) Audio 입력을 수용하여 1개 채널을 선택, 음량 을 VU Meter와 스피커로 모니터함과 동시에 Line 출력이 된다. 또한 위상 Meter도 있어 동위상 또는 역위상 확인이 가능하며 입력감 도 설정을 4단계로 할 수 있다. MICOM을 장착 채널 1-4 선택시 Level ATT와 Mode 선택내용이 자동 으로 기억되어 선택된다. MB-630 모니터는 고음질의 좌우 스피커와 중앙에 우퍼 스피커를 설치하여 음질이 풍부한 장점을 갖고 제작된 장비이다. 또한 VU메터는 기존형태의 바 늘이 움직이는 것이 아니라 소형의 LED 램프가 동작, 미려하게 표시되는 것 이 특징이기도 하다. 입력은 4 X 4로 되어 있어 한 개의 입력 소스는 4개의 채널을 선택하도록 설계되어 있어 모두 16개의 입력 소스를 모니터링 할 수 있다. 또한 AES/EBU, SDI신호를 Option으로 장착할 수 있어 다용도로 사용 이 가능한 장비이다. Ordering Information MB-630 LED MB-630 VU MB-AES MB-SDI / DE MB-630 LED KIT 16x Analog audio / LED Metering 16x Analog audio / VU Metering AES Input option SD 4X1 Input option LED Meter kit L, R, Mono, Mute 10W Stereo Class-D 0 C to 40 C Free Voltage(AC 85~264V, 50/60Hz) 483(W) x 88(H) x 350(D)mm