Audio Code

AudioCodes Configuration

Types of Audio codes• Analog gateway

– MP1xx– MP11x

• Digital gateway

– Mediant 1000– Mediant 2000

Default IP address

• MP-1XX FXS IP : 10.1.10.10

• MP-10X FXS IP : 10.1.10.11

• Subnet Mask : 255.255.0.0

• Default Gateway : 0.0.0.0

IP assigning method

• Web Browser

• Bootp/TFTP Server

Web Browser

• Take AudioCodes in the Browser with default ip.

• Assign new ip address,NAT ip,subnet mask and default gateway.

• Save the configuration into flash memory and reboot the Audiocodes.

• Take Audiocodes with new ip address

Bootp/Tftp server• Connect an Audiocode direcly to

Bootp/Tftp server with a cross cable.

• Enter into the Bootp program.

• Enter into ‘Services’ and then click ‘Clients’

• Now you can see the client configuration window

• Add client details such as MAC address,IP address,subnet mask and default gateway

• Click apply,apply&reset then ok

• IP has been assigned to the Audio code

General Configurations

• SIP Parameter • Coder • End point phone table• Authentication prefix• DTMF and Dialing• Voice setting and RTP setting

SIP Parameter• Nextone (SIP) server ip address

Coder• Sify and our carrier supports G729 codec

End point phone• Assign phone number to the channel

Authentication prefix

DTMF and Dialing

Voice settings

RTP Settings

Configuration file• Download/upload configuration (ini) file

from/into the Audio code.

Software Upgrade

• Upgarde the firrmware of the Audio code

• Click start software upgrade button and load Cmp file then reset the Audio code.

Status & Diagnostics

• Call Details

• Channel status

• Message log

• System Information

Call Details

Channel Status

Message Log

System Information

Save Configuration• Save the configuration to Flash memory

Reboot • Finally reboot the Audio code.