AUCTION - vihn.netpmi.vihn.net/auction/Files/3_41576_Multi Location 7_11_2013.pdf · CNC & Manual Machine Tools & Fab & Welding Equipment; ... BULLARD DYN-AU-TAPE 56", G.E. 1050 CNC

AUCTIONONE DAY SALE OF SURPLUS EQUIPMENT FROM (11) LOCATIONS ACROSS TEXAS & OKLAHOMA

As New As 2011 Featuring:CNC & Manual Machine Tools & Fab & Welding Equipment; Heat Treat;

Sand Blast; Q.C. & Testing; Plant Support; Trucks; Trailers; Truck Crane; Forklifts; More.

Theater-Style Digital Color Slide Auction to be

Conducted Off-Site at the

HOLIDAY INN EXPRESS & SUITES

125 AIRTEX DRIVE HOUSTON, TX 77090(See Directions on Back Page)

AUCTION: THURSDAY JULY 11 • 10:00 A.M.

INSPECTION: Monday–Wednesday, July 8, 9, & 10,

9:00 A.M.–4:00 P.M. & Morning of Sale.

Other Times Available by Appointment.

Read Partial Terms and Conditions on Back Page of Brochure

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: [email protected]: www.pmi-auction.com

Bob Braman TX Lic. #6362 • Ron Moore TX Lic. #7314HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

On-Site Bidding in Houston, TX or Bid Via Webcast at BUYER’S PREMIUM: 13% ONSITE

16% VIA WEBCAST

Car Bottom StreSS relieving FurnaCe

Piranha 110 t. CaP. hydrauliC ironworker

hySter 8,000 lB. CaP. lPg ForkliFt

Freightliner Century ClaSS heritage edition truCk traCtor

(1 oF 4) elkhart & minSter 45 t. CaP. gaP Frame PreSSeS

Sullivan Palatek 100 hP rotary SCrew

tyPe air ComPreSSor

(1 oF 2) giddingS & lewiS 48" CnC vert. Boring millS

CNC mori Seiki 24" x 120" mdl. tl-40 CnC latheCNC

2011 20072009

2001

2 3

(1 oF 2) g&l 48" CnC vert. Boring millS

>Bullard 54" vert.

Boring mill g&l 4" mdl. 340-t taBle tyPe horiz. Boring mill

g&l 6" CaP. Floor tyPe Boring mill

CNC VERTICAL BORING MILLSGRAY RINGMASTER 60" 4-AXIS, remanufactured by Gray in 1988, 4-jaw chuck, 68" max. swing w/o side head, 60" under rail, 48" vert. ram travel, 36" horiz. ram travel right of center, 22" horiz. ram travel left of center, tbl. spds.: 9.5–290 RPM, 50 HP, pendant, pwr. indexing ram head, pwr. indexing side head, (no CNC control), S/N 9836. (Location B)BULLARD DYN-AU-TAPE 56", G.E. 1050 CNC control, 4-jaw pwr. combi-nation chuck, 68" max. swing, 68" under rail, 50" ram vert. head stroke, 100 HP, 320 RPM, HD 12.75" ram, 16-station tool block changer, S/N 33527. (Location B)SCHIESS-FRORIEP MDL. 16DS125 WITH FORKHARDT VALVE INDEXING/ROTATING CHUCK, 63" max. swing, 40" vert. ram travel, 40" horiz. ram travel, 17,600 lb. max. workpiece, table spds.: 3.15–315 RPM, 75 HP, 12 tool cap. tool changer, S/N 1171.0452. (Location B)(2) GIDDINGS & LEWIS 48" MDL. VTC48, G&L 800B CNC control, 48" tbl., 4-jaw chuck, 60" swing, 60" under rail (12" extra), tbl. spds.: 15–320 RPM, 60 HP, 12-tool cap. tool changer, S/N 512-178-82, S/N 512-201-82. (Loca-tion J)GIDDINGS & LEWIS 36", G&L 802L CNC control, 36" tbl., 48" swing, spndl. spds.: 4.5–480 RPM, 75 HP, 36" under rail, 36" 4-jaw chuck (no master or top jaws), S/N 511-54-80. (Location B)BULLARD 30", remanufactured 1994, Fanuc OTA CNC control, 3-jaw pwr. chuck, 44" max. swing, 25" max. height under rail, tbl. spds.: 0–500 RPM, 30 HP, S/N 26986. (Location B)

VERTICAL BORING MILLSSCHIESS 70" MDL. 20DKE180, 70.9" tbl., 4-jaw chuck, 73" swing, 49.2" under rail, tbl. spds.: 4–2,000 RPM, 4 pos. pwr. turret, side head, (no main drive motor or pendant), S/N 378996. (Location B)BULLARD 54", 50" plain tbl., 56" swing, 35.5" under rail, 3.5–60 RPM, 5 pos. turret, 25 HP, side head, S/N 23428. UNDER POWER. (Location B)BULLARD 42" CUTMASTER, 42" plain tbl., 5 pos. pwr. turret, spds.: 5.5–200 RPM, side head w/4 pos. turret, 30 HP main drive motor, Duplomatic hyd. Motors for tracing attach., S/N 27355. (Location A)

CNC HORIZONTAL TABLE TYPE BORING MILLS

LUCAS 6" MDL. 40T88, Camsoft PC based CNC control, 60" x 110" tbl., No. 50 taper w/tool ejector, 96" X-axis tbl. cross travel, 96" Y-axis vert. headstock travel, 48" Z-axis spndl. long. travel, 48" W-axis saddle travel, 210" saddle length, spndl. spds.: 5.6–1,120 RPM, 50 HP, pwr. drawbar, coolant, outriggers, S/N 40T0159. (Location B)GIDDINGS & LEWIS 4" MDL. 70-4JE-3X, Mfd. 1968, Machine Mate PC based controls, 36" x 60" tbl., No. 50 PDB taper, 48" X-axis table cross travel, 48" Y-axis vert. headstock travel, 84" saddle length, spndl. spds.: 6.9–1,320 RPM, 20 HP, 3 shear vert. ways, 4 bed ways, hard bed and saddle ways, Hansen refrigeration unit, S/N 405-28-68. UNDER POWER. (Location B)

FLOOR TYPE HORIZONTAL BORING MILLGIDDINGS & LEWIS MDL. 360-L, 6" main spndl. w/46" travel, spds. 24–500 RPM, aux. high speed spndl. w/12" travel, spds. 33–2,000 RPM, travels: 360" X- axis, 144" Y- axis, (4) 101" x 97" x 15" tbls. w/1-1/4" t-slots, pendant control, Anilam Wizard 550 2-axis DRO, S/N 190-8-55. UNDER POWER. SEE VIDEO. (Location C)

TABLE TYPE HORIZONTAL BORING MILLSGIDDINGS & LEWIS MDL. 340-T, 4" main spndl. w/#5 taper, 32" travel, spds. 25–450 RPM, aux. high spd. spndl. w/8" travel, spds. 25–1,500 RPM, 30" x 60" tbl., travels: 48" X-axis, 30" Y-axis, 40" W-axis, outboard support, S/N 4845. UNDER POWER. SEE VIDEO. (Location C)3" GIDDINGS & LEWIS MDL. 330T, 3" main spndl. cap., 2" hi-speed spndl. cap., 30" x 62" tbl., travels: 48" X-axis, 36" Y-axis, 36" Z-axis, 24" Z-axis (main spndl.), 9" Z-axis (hi-speed spndl.), spds.: 8.3–500 (main spndl.), 25–1,500 (hi-speed spndl.), rapid traverse, S/N N.A. UNDER POWER. (Location B)

PORTABLE BORING & FACING MACHINES(4) MASTER MACHINE TOOLS, 4-spd. gearbox, 18" saddle travel, 2" facing head travel, spds.: 10–40 RPM, 10 HP, Morse SCR motor spd. control, facing head holder, S/N 9072-GMC-A, S/N 9072-GMC-B, S/N 9072-GMC-2A, S/N 9072-GMC2-B. (Location B)

CNCg&l 4" CnC taBle tyPe horiz. Boring mill

CNC

<gray ringmaSter 60" CaP. 4-axiS CnC vert. Boring mill

CNC

LARGE

CAPACITY

2 3

(1 oF 4) maSter maChine toolS PortaBle Boring & FaCing maChineS

>Skoda

78.5" x 78.5" inFeed

rotary taBle

BridgePort ez-Path CnC Flat Bed lathe

>giSholt mdl. 5 maSterline

ram tyPe turret lathe with BarFeeder

haaS mdl. hl1 Slant Bed CnC ChuCker

INFEED ROTARY TABLESKODA 78.75" X 78.75", new 1989, T-slots, 55,000 lb. load cap., 48" infeed travel, 5 HP feed motor, pwr. infeed, rack and pinion infeed, S/N 24121. (Location B)

POSITIONING FLOOR TABLEMADISON 96" X 96", flip-up style, 96" x 96" platen, (2) 48" x 24" bolt-on extensions, S/N N.A. (Location B)

CNC LATHESMORI SEIKI 24" X 120" MDL. TL-40, Fanuc MF T4 CNC control, 24.4" swing, 13.8" max. turning dia., 120" btwn. centers, 9.3" X-axis travel, 116" Z-axis travel, 4.1" spndl., 1,500 RPM max. spndl. spd., 8-station turret, tailstock, 25 HP, 12" 3-jaw chuck, chip con-veyor, (3) SMW SLK314 hyd. steady rests, S/N 2379621. UNDER POWER. (Location B)MAZAK MDL. M-5, Fanuc 5T CNC control, 24" swing over bed, 13" swing over crosslide, 80" dist. btwn. centers, 4" spndl., 30 HP, 15" 3-jaw chuck, 2,000 RPM spndl. spd., front and rear turrets, tailstock, chip conveyor, S/N 40395. UNDER POWER. (Location B)MAZAK MDL. M-4, Fanuc 5T CNC control, 22" swing over bed, 11" swing over crosslide, 60" dist. btwn. centers, 3.125" spndl., 12" 3-jaw pwr. chuck, spndl. spds.: 13–2,200 RPM, 20 HP, front and rear turrets, tailstock, chip conveyor, S/N 12716, parts only. (Location B)HAAS MDL. HL1 SLANT BED CHUCKER, new 2/1996, Haas CNC control, 20" swing over bed, 24" centers, 8" dia. 3-jaw chuck, 2" spndl. hole, 10 pos. turret, 50–3,750 RPM, 15/20 HP motor, mist collector, S/N 60317. (Location H)BRIDGEPORT ROMI EZ-PATH, new 1996, new color CRT, 16.5" sw. x 40" centers, 8" swing over crosslide, 2" hole, spds.: 37.5–3,000 RPM, 4MT tailstock, Buck 8" dia. 6-jaw chuck, 5C lever action collet closer attach., S/N 002-081116-325. SEE VIDEO. (Location A)

ENGINE LATHESDAEWOO 25" X 120" MDL. DA25, 24.375" swing over bed, 15.375" swing over crosslide, 120" dist. btwn. centers, 3" spndl. bore, spndl. spds.: 25–2,000 RPM, taper, threading, S/N 040060. (Location A)BIRMINGHAM 22" X 80", 22" swing over bed, 13" swing over crosslide, 32" swing in gap, 80" dist. btwn. centers, 3-3/16" spndl., spndl. spds.: 16–1,600 RPM, 10 HP, S/N V020. (Location A)MONARCH 20" X 78" MDL. 2013x78, 20" swing, 78" dist. btwn. centers, 13" swing over crosslide, 12" dia. 3-jaw chuck, taper attach., spds.: 12–1,500 RPM, 2" hole through spndl., S/N 51810 (new 1976). (Location K)STERLING 18" X 60" MDL. LG-1760DS, 10" dia. 3-jaw chuck, taper attach., spds.: 14–1,600 RPM, inch/metric thdng., gap in front of chuck, swings approx. 20" in gap, S/N 94-5-57. Shift mechanism needs work. (Location H)CLAUSING COLCHESTER 15" X 50" MDL. 8031, 9.5" swing over crosslide, 2.0625" spndl., 7.5 HP, spndl. spds.: 25–2,000 RPM, taper, toolpost, threading, 6 pos. rear turret, S/N 14960. (Location B)LEBLOND REGAL 14" X 42", 8" dia. 6-jaw chuck, taper attach., spds.: 45–1,800 RPM, inch thdng., S/N 2B1505. (Location H)SOUTHBEND 13" X 20" MDL. CL-1307, 7" swing over crosslide, 4,000 RPM variable spndl. spds., 5 HP, steadyrest, S/N 72 SP 132. (Location A)

RAM TYPE TURRET LATHESKIA MDL. 4AII, 19.25" swing over bed, 16.5" swing over carriage, 9.5" swing over crosslide, 2.375" spndl. bore, spndl. spds.: 40–2,000 RPM, 10 HP, 6 pos. pwr. turret, 8" 3-jaw chuck, toolpost, S/N N.A. (Location A)GISHOLT MDL. 5 MASTERLINE, spds.: 30–1,500 RPM, collet chuck w/hyd. barfeed, pre-select headstock, 4-way on front carriage, 3.5" bar cap., S/N 3716-9. UNDER POWER. (Location B)

AUCTION: THURSDAY, JULY 11 • 10:00 A.M.

LARGE

CAPACITY

mori Seiki 24" x 120" mdl. tl-40 CnC lathe

CNC

4AVAILABLE

NEW

COLOR CRT

CNC

CNC

4 5

vanguard mdl. 7vSlB vert. turret mill

g&l BiCkFord 8' x 19" radial arm drill

devlieg mdl 4h-60 Jig mill

mittS & merrill no. 2 keySeater

HIGH SPEED VERTICAL GEAR HOBBERS

(2) VANGUARD, new 2006, 7.87" max. workpiece dia., 45 deg. max. workpiece helical angle, 5.51" max. hob dia., spndl. spds.: 79–498 RPM, 10 HP, Morse No. 5 hob arbor, S/N 0029, S/N 0030. UNDER POWER. (Location B)

CNC KEYSEATERFROMAG MDL. RA CNC 100/750, Fromag CNC control, 19.68" x 30.31" tbl., 12.0" ht. tbl., 0.118" to 3.93" max. keyway width, 29.52" max. keyway length, 0.393" to 19.68" bore dia., 77 lb. max. workpiece weight, 15 HP motor, S/N 46701 ASK3348-4. (Location A)

KEYSEATERMITTS & MERRILL NO. 2, 12" max. keyway length, 1.25" max. keyway width, S/N 6639. UNDER POWER. (Location B)

RADIAL DRILLSGIDDINGS & LEWIS BICKFORD 8' X 19" TRACK TYPE, spndl. spds.: 10–1,250 RPM, 3 HP, No. 6 MT spndl. taper, pwr. elevation, pwr. clamping, pwr. head traverse, pwr. traverse to base, S/N 956-00138-65. (Location B)IKEDA 4' X 13" MDL. RM1150, spndl. spds.: 30–1,500 RPM, 7.5 HP, No. 5 MT spndl. taper, pwr. elevation, pwr. clamping S/N 84087. (Location A)CARLTON 3' X 9", spndl. spds.: 80–2,000 RPM, 5 HP, No. 4 MT spndl. taper, pwr. elevation, box tbl., S/N 1A105. UNDER POWER. (Location B)MORRIS 3' X 9", spndl. spds.: 75–1,500 RPM, 3 HP, No. 4 MT spndl. taper, pwr. elevation, S/N G-290. UNDER POWER. (Location B)

METAL DISINTEGRATORELECTRO ARC MDL. HK6, 51" x 37" tbl., S/N 7287. (Location B)

CNC VERTICAL MILLHURCO MDL. KM3P, Hurco CNC control, 14" x 49" tbl., 10" x 38" work surface, 24" long. travel, 13.7" cross travel, 15.5" knee travel, spndl. spds.: 60–4,000 RPM, 3 HP, S/N KDB-8015129E. (Location A)

VERTICAL TURRET MILLSVANGUARD MDL. 7VSLB, new 2007, 60" x 14" tbl., No. 40 spndl., variable spndl. spds.: 50–5,000 RPM, 7.5 HP, 2-axis D.R.O., pwr. tbl. feed, pwr. knee elevation, pwr. drawbar, box ways, S/N TR1212. UNDER POWER. (Location B)BRIDGEPORT SERIES II, 58" x 11" tbl., variable spndl. spds.: 50–3,500 RPM, 4 HP, pwr. feeds, hard chrome saddle ways, S/N 5025. UNDER POWER. (Location B)INDEX MDL. 745, 9" x 48" tbl., swivel vise, 2-axis D.R.O., pwr. cross feed, S/N 15093. (Location H)

JIG MILLDeVLIEG MDL. 4H-60, 40" x 60" T-slot tbl., 4" spndl., 48" vert. headstock travel, spndl. spds.: 26–1,220 RPM, threads and feeds, rapid feeds, way covers, lubrication system, Accu-Rite 3-axis D.R.O., S/N 8358. UNDER POWER. (Location D)

UNIVERSAL HORIZONTAL MILLKEARNEY & TRECKER NO. 310-CH-14, 64" x 13.5" tbl., spndl. spds.: 15–1,500 RPM, 10 HP, No. 50 spndl., dbl. overarm, S/N 6-9344. UNDER POWER. (Location B)

PLAIN HORIZONTAL MILLSHERCULES MDL. 3P, 63" x 12" tbl., spndl. spds.: 56–1,503 RPM, vert. head, S/N 1770. UNDER POWER. (Location B)CINCINNATI NO. 2MH, 52.75" x 10.5" tbl., spndl. spds.: 23–1,200 RPM, No. 50 spndl., 5 HP, arbor suppt., S/N 5A2P1E-20. UNDER POWER. (Location B)HITACHI NO. 2M-P, 53" x 12" tbl., No. 50 spndl., spndl. spds.: 25–1,500 RPM, 10 HP, vert. attach., S/N 8706205. UNDER POWER. (Location B)KEARNEY & TRECKER NO. 650TF20, 106" x 19.5" tbl., 60" long. travel, spndl. spds.: 15–1,500 RPM, 50 HP, No. 50 spndl., twin elevating screws, dbl. overarm, hardened ways, S/N 57-1001-11. UNDER POWER. (Location B)

See Back Page for Equipment Location Index

hurCo CnC vert. mill

CNC

(1 oF 2) vanguard high SPeed vert. gear hoBBerS

CNC

2006

2007

DUAL

SCREENS

LARGE

CAPACITY

4 5

(1 oF 3) ComBination mill/drillS

(1 oF 4) leeS Bradner thread millerS

Startrite mdl. 316h 36" throat vert. BandSaw

trennJaeger 36" CaP. mdl. PmC-12 Cold Saw

FmB 10.25" x 10.25" hydrauliC Semi-auto mitre BandSaw

3m-matiC mdl. 77r-kS CaSe Sealer

w.F. wellS 25" x 40" twin PoSt horiz. BandSaw

THREAD MILLERS(2) LEES BRADNER 12" X 102" MDL. LT 12x102, 102" dist. btwn. centers, 24" sw. over bed, 12" sw. over carriage cutter, 3 HP mill head motor, 3 HP headstock motor, milling head, tailstock, 15" dia. 3-jaw chuck, follow rest, S/N HT-652, S/N HT-1434. (Location A)LEES BRADNER 24" X 54" MDL. HT 12x54, 54" dist. btwn. centers, 24" sw. over bed, 12" sw. over cutter carriage, 3 HP mill head motor, 3 HP headstock motor, milling head, tailstock, 15" dia. 3-jaw chuck, follow rest, S/N HT-604. (Location A)LEES BRADNER 8" X 36" MDL. LT 8x36, 36" dist. btwn. centers, 18" sw. over bed, 8" sw. over cutter carriage, 2 HP mill head motor, 2 HP headstock motor, milling head, tailstock, 12" dia. 3-jaw chuck, follow rest, S/N LT-220. (Location A)

PRODUCTION MILLCINCINNATI MILACRON MDL. 100 POWERMATIC SIMPLEX, 12" x 48" tbl., 24" tbl. travel, 6" quill dia., No. 50 NST spndl., spndl. spds.: 40–1,600 RPM, 7.5 HP drive, arbor suppt., S/N 11B1P1AHE-66. (Location A)

COMBINATION MILL/DRILLSPRO CUT MDL. RL80RF311 BENCH TYPE VERTICAL MILL/DRILL, S/N 534467. (Location F)RONG FU MDL. RF-30 BENCH TYPE VERTICAL MILL/DRILL, R-8 spndl., spndl. spds.: 120–2,500 RPM, 28.75" x 8.25" tbl., 2 HP, S/N 434905. UNDER POWER. (Location B)DAYTON MDL. 3W913B COMBINATION MILL/DRILL. (Location A )

CIRCULAR COLD SAWSTRENNJAEGER MDL. PMC-12, 36" max. dia. circular cold saw blades, spds.: 36" blade (16, 22, 32 and 44 FPM), helical hardened gears, S/N HA308. UNDER POWER. (Location B)BURKHARDT & WEBER MDL. HKSA450 AUTOMATIC, 20" dia. blade, 7.125" rd. cap., spds.: 16–106 RPM, spare blades, S/N 14374. (Location B)

COLD SAWDORIENGER MDL. D350, 14" (est.) blade, swivel guides for mitering. (Location H)

SEMI-AUTOMATIC TWIN POST HORIZONTAL BANDSAW

W.F. WELLS MDL. B-25-2, 25" x 40" cap. @ 90 deg., blade spds.: 75–500 SFPM, 1.5" blade, hyd. blade tension, hyd. vise, S/N 1828 B83235. UNDER POWER. (Location B)

AUTOMATIC HORIZONTAL BANDSAWSHEM MDL. H101A-1, 10" rd. bar cap., programmable Hem control, auto. feed tbl., self-contained coolant system, pwr. clamping, digital parts counter, S/N 625198. (Location H)KNUTH 10" X 11" MDL. ABS280B, 2 HP, S/N 50284. (Location H)

HORIZONTAL BANDSAWHYD-MECH 13" X 18" MDL. S-20, Series II, cutting head swivels to cut up to 60 deg. angle mitering capability, infeed rollers, coolant, 21-1/2" w. by approx. 10' l. H.D. roller conveyor. (Location K)

HYDRAULIC SEMI-AUTOMATIC MITRE BANDSAW

FMB MDL. MAJOR SERIES SEMIAUTOMB, 10.25" round cap., 10.25" x 10.25" square, 10.25" x 14.5" rect., vari. speed, 1.5 HP main motor, gear drive, coolant, S/N N101075. (Location F)

VERTICAL BANDSAWSSTARTRITE MDL. 316H, 36" cap., 36" throat, 26" x 26" sliding tbl., 22" x 13" support tbl., blade welder and grinder, 220/3/60, S/N 16948. (Location A)DOALL MDL. 3613-0, 24" sq. tbl., 36" throat, S/N 278-77788. (Location K)

PACKAGING EQUIPMENT3M-MATIC MDL. 77R-KS CASE SEALER, (2) 3" top and bottom tape heads, auto. adj. for height and width, 6" x 6" x 4.75" high min. box size, unlimited length x 20.5" x 20" high max. box size, 85 lb. max. box weight, (12) boxes per min., S/N 5394. UNDER POWER. (Location B)

AUCTION: THURSDAY, JULY 11 • 10:00 A.M. INSPECTION: Monday–Wednesday, July 8, 9, & 10, 9:00 A.M.–4:00 P.M. & Morning of Sale. Other Times Available by Appointment.

On-Site Bidding in Houston, Texas or Bid Via Webcast at

LARGE

CAPACITYLARGE

CAPACITY

6 7

>(1 oF 2) CryStal

lake ultra PreCiSion grinderS

vanguard 12" x 40" univerSal CylindriCl grinder

vanguard 10" x 20" reCiProCating SurFaCe grinder

BarneS mdl. 3010 vertiCal hone

UNIVERSAL CYLINDRICAL GRINDERSVANGUARD 12" X 40" MDL. ME1432B/1000, new 2008, 12.59" dia. max. external grinding, 4.92" dia. max. internal grinding, 39.37" btwn. centers, 330 lb. max. workpiece weight, 19.68" O.D. grinding wheel, 1,650 RPM grinding wheel spd., 12.8 HP total motor power, I.D. grinding spndl., coolant, S/N 200802. UNDER POWER. (Location B)

CRYSTAL LAKE MDL. 1020U, 10" swing, 20" btwn. centers, 42" tbl., 6,000 RPM grinding wheel spd., 10" dia. grinding wheel, variable workhead spds.: 0–1,700 RPM, 3 HP wheelhead motor, S/N 1020U-4901. UNDER POWER. (Location B)

PLAIN CYLINDRICAL GRINDERSCINCINNATI 10" X 36" HYDRAULIC, 10.5" swing, 36" btwn. centers, 30" dia. x 6" w. grinding wheel, workhead spds.: 40–245 RPM, 15 HP wheel-head motor, coolant, Acrasize II controls, Encyclone filtration unit, S/N 3538-2D77-001. (Location B)

CRYSTAL LAKE MDL. 608P, 6" swing, 10" btwn. centers, 6,000 RPM wheel spd., 7" dia. grinding wheel, variable workhead spds.: 0–1,700 RPM, 2 HP wheelhead motor, coolant, S/N 608-2322. UNDER POWER. (Location B)

CNC CURVIC COUPLING GRINDERGLEASON NO. 130, 60" max. dia., 50" max. dia. coupling, 0.375" max. full depth, 20 to 360 teeth index range, 10" sliding base travel, 20.5" dia. spndl. hole, 15 HP wheel drive motor, S/N 674302. (Location B)

CNC HORIZONTAL HONEBARNES MDL. 6F, Fanuc O-Mate-T control, 18" swing radius, 6" I.D. hone cap., 360" spndl. stroke, 20 HP spndl. motor, spndl. spds.: 65–374 RPM, reciprocating spds.: 10–90 FPM (infinite variable), infinite adj. hone feeds, rotating work rests, S/N ZP-10111. (Location B)

HORIZONTAL HONESSUNNEN MDL. MBB-1660, 0.060" to 6.5" I.D. dia. cap., 16" max. hone length, S/N 91724. UNDER POWER. (Location B)

SUNNEN MDL. MBB-1290D, 0.120" to 2.625" I.D. dia. cap., 18" max. hone length, S/N 17780. UNDER POWER. (Location B)

VERTICAL HONEBARNES MDL. 3010, 10" max. honing cap., 35" max. spndl. stroke, 10 HP mo-tor, spndl. spds.: 54–354 RPM, Barnes drill disposable media, S/N NP10456. (Location B)

INTERNAL GRINDERHEALD MDL. 172, 36" swing, 1' to 14" dia. hole grinding cap., 13" stroke, workhead spds.: 0–210 RPM, 5 HP spndl., pwr. feed, S/N 28503. (Location B)

RECIPROCATING SURFACE GRINDERSGMP 39.75" X 12.75" MDL. 3G 1000/400, 39.75" x 12.75" electromagnetic chuck, 39.75" long. tbl. travel, 12.75" cross travel, 13.7" max. work height, 13.6" x 1.6" x 6" bore grinding wheel, 5.5 HP, S/N 198614. (Location B)

VANGUARD 10" X 20" MDL. GM-Y250, new 2007, 9.84" x 19.68" electromagnetic chuck, 19.68" long. tbl. travel, 9.84" cross travel, tbl. spds.: 118–984 IPM, 7.87" dia. grinding wheel, 2,850 RPM wheel spd., 2 HP, S/N 087. UNDER POWER. (Location B)

BROWN & SHARPE 6" X 18" NO. 21, 10" vert. spndl. slide travel, 20" long. tbl. travel, 6.5" cross travel, 18" x 6" magnetic chuck, 3,200 RPM spndl., S/N 523-2-1408. UNDER POWER. (Location B)

BOYAR SCHULTZ CHALLENGER 6" X 18", 18" x 6" perm. magnetic chuck, 19" long. tbl. travel, 7" cross travel, 7" dia. grinding wheel, 3,000 RPM spndl. spds., 1 HP, S/N CH-3755-2A. UNDER POWER. (Location B)

TOOL & CUTTER GRINDERSLUX MDL. TM-40A, 16" long. travel, 10" cross travel, 1 HP, motorized workhead, swivel wheelhead, S/N 10304. UNDER POWER. (Location B)

CINCINNATI NO. 2, 16" long. travel, 10" cross travel, 1 HP, tilting wheelhead, motorized workhead, S/N 1D2T5M-84. UNDER POWER. (Location B)

CINCINNATI NO. 2, 24" long. tbl. travel, 10" cross travel, 1 HP, motorized work-head, tilting wheelhead, S/N 1D2T6T-85. UNDER POWER. (Location B)

CINCINNATI NO. 2, 16" long. tbl. travel, 10" cross travel, 1 HP, S/N 1D2T1Y-531. UNDER POWER. (Location B)

PEDESTAL GRINDERLINNS, 10" wheel cap., 1 HP, S/N 197677294. (Location B)

Brown & SharPe 6" x 18" reCiProCating SurFaCe grinder

See Back Page for Equipment Location Index

INSPECTION: Monday–Wednesday, July 8, 9, & 10, 9:00 A.M.–4:00 P.M. & Morning of Sale. Other Times Available by Appointment.

BarneS mdl. 6F CnC horiz. hone

CNC

<gleaSon mdl. 130 CnC CurviC CouPling grinder

CNC

20082007

LARGECAPACITY

6 7

emPire mdl. PrS-6S BlaSt unit ComPonent oF SandBlaSt SyStem

u.S. Filter BaghouSe ComPonent oF SandBlaSt SyStem

vanguard tumBle BlaSt tyPe Shot BlaSt maChine

air-dex Pneu. 12-PoS. lathe and mill attaChment

JoneS & lamSon 30" CaP. oPtiCal ComParator

Car Bottom StreSS relieving FurnaCe

CAR BOTTOM STRESS RELIEVING FURNACETHOMAS INDUSTRIAL SERVICES/HTF, new 2001, natural gas fired, internal dims: 107" w. x 107" dp. x 75" ht., 15 T. car weight cap., 0–1,400 deg. F temperature range, overall outside dims. approx. 148" dp. x 166" w. x 160" ht., 5-zone, Hauck SVG burners, Fisher Controls feed units, pneu. door seal system, vent piping with NYB exhaust blower, electrical control cabinet, S/N N.A. (Location A)

HEAT TREAT FURNACELUCIFER MDL. DL-8008-C DUAL CHAMBER, 2,000 deg. F. max. temp., upper cham-ber I.D.: 21" dp. x 10" w. x 10" ht., lower chamber work space I.D.: 18" dp. x 9" ht. x 9" w., 10 KW, 43.5 amps, 230/1/60, Honeywell thermostat, Partlow controls, S/N 4046. (Location D)

SHOT BLAST MACHINEVANGUARD MDL. LP-500 PEDRAIL TUMBLE BLAST MACHINE, new 2007, 1,100 lb. max. load, 66 lb. max. unit weight of workpiece, productivity: 3300 – 4400 lb./hr. 16.5" wheel dia., 2,880 RPM wheel speed, overall size of main body: 79" l. x 81" w. x 179" h.; Overall size of dust collector: 40" l. x 59" w. x 128" h., S/N 0611032. (Location B)

SANDBLAST ROOM & EQUIPMENTSYSTEM CONSISTS OF: EMPIRE MDL. PRS-6S SANDBLAST UNIT W/RECOVERY SYSTEM & 10 HP NYB BLOWER, skid mtd., S/N P-16699; U.S. FILTER BAGHOUSE, 182" ht. (plus fan equipment) x 72" dp. x 78" w., Magnehelic gauge, gravity bottom cleanout; BLAST ROOM w/fluorescent lighting, 18' dp. x 14' w. x 10' ht., (6) fluores-cent light fixtures, (1) man door, (1) 96" ht. x 110" w. entry door w/integral man door. (Location D)

VIBRATORY FINISHING MACHINESHUTSON MDL. HB25VA, 25 cu. ft. cap., 75" bowl dia., 10 HP, S/N B25807. (Location A)SWECO MDL. FMD-20HA, 20 cu. ft. cap., 57" bowl dia., 10 HP, S/N 20FM-469-49. (Location A)GIANT MDL. W-3, 3 cu. ft. cap., 1 HP, low profile, sound cover, S/N 1056. (Location A)

TOOL CABINETSTANLEY VIDMAR 60" W. X 59" HT. X 28" DP., (10) roller bearing drawers. (Location H)

VALVE TEST STANDS(2) BARBEE MDL. H-6000 HYDROSTATIC, 10,000 PSI, clamping fixture. (Location B)

OPTICAL COMPARATORJONES & LAMSON 30" MDL. EPIC-230, double spndl. design, 9" x 12" travels, Metronics Mdl. Quadra-Chek 2000 2-axis control, S/N 805. (Location A)

COORDINATE MEASURING MACHINEBENDIX CORDAX MDL. 1805, 17.7" x 21.6" tbl., 19.7" X-axis x 15.7" Y-axis x 11.8" Z-axis measuring range, 14.8" work height, Renishaw TP-1 probe, S/N 2-4566-0884. UNDER POWER. (Location B)

LAYOUT MACHINEPORTAGE MDL. 36A, 50" x 70" tbl., 12" rotary tbl., S/N 36612. (Loca-tion B)

QUALITY CONTROL EQUIPMENTSURFACE PLATE, 24" x 36" x 4" thk., black granite, on H.D. tbl. (Loca-tion A)SURFACE PLATE, 22" x 32" x 4" thk., gray granite, on H.D. cart w/casters. (Location A)

BARFEEDERS(2) SMW MDL. SPAC2200, S/N 13-527-01-2006, S/N N.A. (Location H)

PRECISION MACHINE ACCESSORIES & TOOLING

AIR-DEX MDL. 12 12-POSITION ROTARY TURRET ATTACHMENT, for lathes and mills, pneumatic power (80 PSI), thru-the-tool coolant, toolholders, S/N N.A. (Location A)CHUCKS; CHUCK JAWS; DRILLS; COLLETS; TOOLHOLDER; ROTARY INDEXER. (Location H)APPROX. (30) UNUSED HORIZONTAL MILLING CUTTERS UP TO 8" DIA.; 3" and 4" REAMERS; MORE. (Location A)

(1 oF 2) BarBee mdl. h-6000 valve teSting StandS

AUCTION: THURSDAY JULY 11

10:00 A.M.

2007

2001 10.000

PSI CAP.2AVAILABLE

8 9

(1 oF 2) CoaSt horiz. hydrauliC PiPe and tuBe BenderS

PineS mdl. 5t vert. hyd. PiPe and tuBe Bender

PlaSma SyStemS 120" x 480" CnC oxy. Fuel Flame Cutter

CinCinnati CnC Shuttle tyPe laSer Cutting SyStem

PeddinghauS 170 t. CaP. CnC Single end PunCh

verSon 300 t. x 10' hyd. PreSSBrake

CNC LASER CUTTING CENTERCINCINNATI MDL. CL-707 6X12, new 1/1999, (2) 6' x 12' shuttle type cutting tbls., Rofin Sinar Mdl. 2000SMX resonator, S/N 609000, Mac dust collector, Koolant Koolers Mdl. HCV10000-2PR-NF-FILT refrigeration unit, S/N 13338, 10 HP compressor, Kaser Mdl. KLD-80 air dryer, S/N 3333-2-9903-3KD, Cincinnati control panel, Dell computer, S/N 51143. (Location K)

CNC OXY-FUEL FLAME CUTTING MACHINEPLASMA SYSTEMS, Burney 10LCD CNC control, 120" max. cutting width, 480" max. cutting length, (2) oxy. fuel torches, (6) 16' track sections w/riser pedestals, S/N N.A. UNDER POWER. (Location B)

HYDRAULIC PRESSBRAKESVERSON 300 T. CAP. MDL. H-300-10, 120" bed and ram length, 78" btwn. hous-ings, 16" throat, 12" stroke, front operated manual backgauge, no pit required, S/N 15009. UNDER POWER. (Location B)

PACIFIC 200 T. CAP. 12' X 1/4" MDL. K200-15, 15' overall bed, 12' dist. btwn. housings, 2-1/2" side frames, Merlin Mdl. ISB safety light curtain, foot pedal control, S/N 5829. (Location K)

CHICAGO DRIES & KRUMP 200 T. CAP. MDL. 200HV10, 174" bed and ram length, 124" dist. btwn. housings, 8" throat, 12" stroke, no pit required, S/N H1047. (Location B)

DIACRO 110 T. CAP. MDL. RG-103, up-acting, 102" bed, 102" btwn. housings, 15.75" throat, 3.93" vert. stroke, Hurco CNC backgauge, tooling, S/N 20 100 30 1180. (Location B)

NOTE: ADDITIONAL PRESSBRAKE TOOLING AVAILABLE – SEE CATALOG

CNC BEAM PROCESSING EQUIPMENTPEDDINGHAUS 100 T. CAP. BEAM PUNCH LINE, Mdl. BLP1000/5D, Fagor 8025GP CNC controls, (5) punch assemblies, punch cap.: 15/16" through 1-1/16", 1" dia. through 1" and 1-1/2" dia. through 5/8", 2,500 PSI hyd. pressure, 25 HP motor, S/N PBL-120. (Location A)

PEDDINGHAUS AUTOMATED STRUCTURAL BURNING SYSTEM, Mdl. ABCM-1250/3B, Fagor CNC control, for burning processes such as flange bevel, copes, blocks, flange thinning, cut-offs, haunches, castellations and beam splitting, 50" max./3" min. beam width, 24" max. flange height, 6" max./1/4" min thick-ness, (4) controlled-axes, approx. 50' infeed tbl., S/N 41441. (Location A)

CNC HYDRAULIC PIPE BENDERCOAST 4" MDL. 1004-CNC-A, IPS Schedule 80 steel pipe, 195 deg. max. bend, 40' carriage travel, 40 HP, bend resolution encoder, carriage position encoder, Allen Bradley PLC-5 control, hyd. update 1996, S/N 1004-91-400. (Location B)

HYDRAULIC TUBE & PIPE BENDERSPINES MDL. 5T VERTICAL, rebuilt 2000, bend cap. 1-1/4" x 0.065" wall (1 tube), 1" x 0.065" wall (2 tube), 100 deg. max. bend angle, 20 HP, dual die holders, S/N 44350-63005. UNDER POWER. (Location B)

COAST 4" MDL. 4HRD, IPS Schedule 80 steel pipe, 185 deg. max. bend, 40 HP, retrofit 2002 with new electrics, S/N 4HRD-B-PC-81-223. (Location B)

PIPE BENDER TOOLINGHUGE QUANTITY 4" TOOLING TO FIT PINES AND OTHER BENDERS. (Location A and B)

HYDRAULIC IRONWORKERSPIRANHA 110 T. CAP. MDL. PII-110, 1.375" dia. through 1" thk. max. punch cap., flat bar shear, 5" x 5" x 0.5" angle cap., 2" round bar cap., coping, notching, 15 HP, S/N PII110 020. UNDER POWER. (Location B)

PIRANHA MDL. P50, 50 T. cap. punch rated for mild steel, flat bar shear, 5" x 5" x 3/8" angle shear, 1-1/2" round bar cap., 2-3/4" x 4" x 1/4" coper/notcher, S/N 11257. (Location F)

HILL ACME MDL. 5, capacities: 1" x 4" flats, 3/4" x 6" flats, 5/8" x 10" flats, 1-7/8" rounds, 1-3/4" square, 5" x 5" x 1/2" 90 deg. angles, 4" x 4" x 3/8" T’s, 3" x 3" x 1/2" notches, flanges of beams and channels ranges from 4" to 7", self-contained hyd. reservoir in base, die storage tbl., assortment of punches and dies, S/N 541955. (Location K)

MECHANICAL IRONWORKERBUFFALO 105 T. CAP. MDL. 2-1/2, shear, punch, coper, notcher, bar cutter, flats, angle iron, plates, bar, 7.5 HP, S/N 59Y2531. UNDER POWER. (Location B)

CNC SINGLE END PUNCHPEDDINGHAUS 170 T. CAP. MDL. F1170/B, new 2004, Fagor CNC control, 30" throat, 30" x 60" max. plate size, 1.5" max. hole, 1.25" max. plate thickness, 2" stroke, 8" x 8" x 1.125" max. angle cap., 30 HP, triple gang attach., S/N 45959 SC. UNDER POWER. (Location B)

AUCTION: THURSDAY, JULY 11 • 10:00 A.M.

CNC CNC

CNC CNC2004

(2) 6' X 12' TABLES

4"

CAPACITY

LARGECAPACITY

REBUILT2000

8 9

Piranha 110 t. CaP. hydrauliC ironworker

weBB 10' x 1/2" CaP. Plate Bending roll

(1 oF 4) elkhart & minSter 45 t. CaP. gaP Frame PreSSeS

roundo 4.5" x 4.5" x 1/2" angle Bending roll

Partial view oF miller mdl. 652 welding Power SourCeS

HORIZONTAL/VERTICAL ANGLE BENDING ROLL

ROUNDO MDL. R-5, new 1998, 4-1/2" x 4-1/2" x 1/2" cap., individual roll adj., dies, pedestal control, S/N 986766. (Location K)

PLATE BENDING ROLLSWEBB MDL. 9L2A, 10' overall, 13" dia. rolls, 1/2" (est.) cap. (Location K)LOWN MDL. B400, 3-roll type, 4" dia. rolls, 12 ga. (est.) cap., S/N B4494. (Loca-tion K)

TUBE END FORMERLEONARD/CONRAC MDL. 3CP-HD TUBEMASTER 3" CAP., flaring, beading squar-ing, deburring, flanging, 175–500 RPM vari.-spd. spndl., clamping, 1 HP motor, S/N 84137-33. (Location A)

GAP FRAME PRESSES(2) ELKHART 45 T. CAP. MDL. 45, 3" stroke, 3" slide adj., 28" x 18" bed area, 18" x 12" slide area, 7.5 HP, air clutch and brake, Wintriss Smart PAC controls, PFS Systems-Waddington stock feeder/straightener, S/N 45096004, S/N 45096005. (Location B)MINSTER 45 T. CAP. MDL. 5SS HIGH SPEED, new 1992, 2" stroke, 2.5" slide adj., 28" x 18" bed, 24" x 14" slide area, spds.: 150–300 SPM, 7.5 HP, air clutch and brake, Wintriss Autoset 1500 Plus load analyser, Wintriss Dipro 1500 die protec-tor, S/N 5SS-FB-28158. (Location B)MINSTER 45 T. CAP. NO. 5 O.B.I. TYPE, remanufactured 1996, 2" stroke, 2.75" slide adj., 28" x 18" bed area, 18" x 12" slide area, spds.: 85–250 SPM, 5 HP, air clutch and brake, PFS-Waddington stock feeder/straightener, Wintriss Dipro 1500 die protector, S/N 5-18645. (Location B)

HYDRAULIC PRESSES(2) ACAL 8 T. CAP., 19.5" L-R btwn. uprights, 10" F-B btwn. uprights, 16" x 14" tbl., dbl. action hyd. cylinder, fixed post parallel, digital pressure gauge, shuttle loading tbl., S/N’s N.A. (Location B)

SINGLE ROLL FEEDERMINSTER MDL. MEF3-10, 10" max. stock width, indramat controls, programmable limit switch, S/N 18-50433. (Location B)

COIL WINDERPOTTER-RAYFIELD MDL. WV, S/N 2-22-80-B. (Location A)

MISCELLANEOUS FABRICATING EQUIPMENT

(2) IDLER ROLLS. (Location K)

LARGE COIL STOCK PAYOUT REEL. (Location A)

PORTABLE PLASMA CUTTERS(2) HYPERTHERM POWERMAX MDL. 100, 100 amp, cart mtd., S/N 70-008859, S/N 70-2059. (Location G)

HYPERTHERM MDL. 1250, S/N 1250-018777. (Location F)

HYPERTHERM POWERMAX MDL. 200, S/N 200-003270. (Location G)

PORTABLE WELDING POWER SOURCE/GENERATOR

MILLER BOBCAT 3-PHASE WELDER/GENERATOR, new 2011, 11,000 watt/3-phase generator, 10,000 watt/sgl. phase generator, 225 amp max. for stick, 28 volts max. FCAW/MIG(CV), 130.5 H.O.M., S/N MB210023H. (Location F)

WELDING POWER SOURCES(18) MILLER MDL. DELTAWELD 652, as new as 2006, rated at 650 amps output @ 44 v. DC, 100% duty cycle. (Location A)

(4) MILLER MDL. DELTAWELD 452, rated at 450 amps output @ 38 v. DC, 100% duty cycle. (Location A and G)

(16) MILLER MDL. MAXTRON 450, rated at 450 amps output @ 38 v. DC, 100% duty cycle. (Location A)

(6) LINCOLN MDL. POWER WAVE 450, rated at 450 amps output @ 38 v. DC, 60% duty cycle. (Location A)

(19) AFTEK MDL. MV445DPM DEMAND PULSE MIG WELDERS, new 2000, constant current power source, 5–445 amp range, 400 amp output at 60% duty cycle, 60 V open circuit voltage, stick, TIG, MIG and arc gouging, 230/460-60 Hz, Made in the USA. (Location G)

(3) MILLER MDL. SR400-32, S/N HK258571, S/N HK258572, S/N HK25-8578. (Location G)

(2) MILLER MDL. MILLERMATIC 350P, new as 2011, rated at 300 amps output @ 32 v. DC, 60% duty cycle, S/N MB1000036B (2011), S/N LH49-0932B (2007). (Location F)

LINCOLN MDL. POWER MIG 350MP, 350 amp welding power source, chopper technology. (Location F)

(2) MILLER MDL. 330ST, S/N’s N.A. (Location G)

MILLER MDL. 330A/BP, S/N HJ172841. (Location G)

(3) MILLER MDL. SHOPMASTER 300 CC/CV AC/DC. (Location G)

LINCOLN MDL. IDEALARC TIG 300/300 AC/DC, S/N AC774831. (Loca-tion G)

MILLER MDL. MILLERMATIC 210 MIG, new 2006, 210 amp cap., mig gun, S/N LG410700B. (Location A)

MILLER MDL. MP-65E, S/N HK264734. (Location G)

HOBART MDL. EXCEL6045CV, S/N N.A. (Location G)

WIRE FEEDERS(9) MILLER SINGLE SIDED; (1) PRO-FAX. (Location G)

See Back Page for Equipment Location Index

INSPECTION: Monday–Wednesday, July 8, 9, & 10, 9:00 A.M.–4:00 P.M. & Morning of Sale. Other Times Available by Appointment.

(75+) WELDERS

HORIZ. OR

VERT.

OPERATION

AS NEW AS

2006

50 T. ALSO

AVAILABLE

10 11

2008 BenSon 48' aluminum air ride trailer

Sullivan Palatek 100 hP rotary SCrew tyPe air ComPreSSor

10,000 PSi PortaBle PreSSure teSt Skid2005 PeterBilt 387 hi-riSe SleePer & 2009 maCk Chu613 t/a day CaB

ROTARY SCREW AIR COMPRESSORS

SULLIVAN PALATEK MDL. 100UD, new 2009, 440 ACFM cap., 120 PSI full load, 1,480 RPM, 100 HP, direct drive rotor coupling, skid mtd., S/N 09E021. (Location B)100 HP GARDNER-DENVER ELECTRA-SAV-ER-2 MDL. ECPOMC, 1,780 RPM, motor, 460V, new electric motor, air end needs work, S/N M45521. (Location A)SULLIVAN PALATEK MDL. H75UDJ-TE, new 2006, 340 ACFM cap., 145 PSI full load, 1,775 RPM, 75 HP, direct drive rotor coupling, skid mtd., S/N 06E036. (Location B)(2) PALATEK MDL. 25D4F, new 1998, 95 ACFM cap., 120 PSI full load, 1,775 RPM, 25 HP, direct drive rotor coupling, tank mtd., S/N 98E062, S/N 98L030. (Location B)

RECIPROCATING TYPE AIR COMPRESSOR

INGERSOLL RAND MDL. 2475 2-STAGE, vert. tank mtd., S/N 7022 116. (Location F)

ELECTRIC GENERATORMARATHON ELECTRIC MAGNAMAX MDL. 431RSL2008 TYPE BB300W GEN. SET, ran-dom wound, single bearing, up to 480 volts, S/N XB3780402, with Murphy MGC100 Cas-cade generator control panel. Requires drive engine. (Location A)

PORTABLE HYDRAULIC POWER UNITS

(5) HI-POWER SKID MOUNTED SYSTEMS in-cluding Marathon 15 HP 230/460 volt drive 3,520 RPM motors, integral cooler, (2) units have Enrange Mdl. FLEX-4EX wireless radio remote control system. (Location C)

PORTABLE PRESSURE TESTING SKID

10,000 PSI PUMP POWERED BY DIESEL ENGINE, skid mounted with integral lifting cradle. (Location A)

PLATFORM TRUCKS, STOCK TRUCKS & CARTS

(12) 4-WHEEL THREE-SIDED STOCK TRUCKS, I.D.: 45" x 30" x 60" ht., green. (Location E); (20) 6-WHEEL H.D. PLATFORM TRUCKS, 32" W. x 64" L., large cast-ers, blue. (Location E); (3) 6-WHEEL PLATFORM TRUCKS, orange. (Location E); (15) 4-WHEEL PLAT-FORM TRUCKS, orange. (Location E); (12) 6-WHEEL FLAT LUMBER TWO-LEVEL CARTS, 60" x 30", 2-level, orange. (Location E)

TRUCK TRACTORS2007 FREIGHTLINER CENTURY CLASS HERITAGE EDITION, Sleeper Mdl. MBE-4000, yellow, 10-spd. trans., Twinscrew slider, Mercedes Benz engine, recent upgrades includes: (6) new tires, new starter, new AC lines and parts, new motor mounts, new oil pan, new brakes and drums on rear axles, new air bags on rear axles, Odo. reads: 725,555 miles, VIN 1FJBBCV07-PZ 34090. (Location E)2005 PETERBILT MDL. 387 HI-RISE SLEEPER, tan-dem axle, dual-wheel, CAT C15-475 diesel engine, Eaton Fuller 10-speed transmission, 246" wheelbase, 68" high rise integral sleeper, air ride susp., 5th wheel, Axles: 12,000 lb. front, 40,000 lb. rear, ODO reads: 1,118,690, VIN 1XP7DB9X35D842621. (Location L)2009 MACK MDL. CHU613 T/A DAY CAB, Mack MP-8 445 HP diesel engine, Eaton Fuller 10-spd. trans., air ride cab and suspension, 206" wheelbase, Axles: 12,000 lb. front, 40,000 lb. rear, 5th wheel, alum. frt., wet kit, PTO, ODO reads: 537,542, VIN 1M1AN07-Y29N003693. (Location L)

ROLL-OFF TRUCK2005 KENWORTH MDL. T300 S/A, CAT C7 engine with ACERT technology, Allison auto. trans., Hendrickson air ride susp., demountable concepts Mdl. DS24TTS rolloff, ODO reads: 241,928, VIN 3BKMHDX55F 082147. (Location L)

TRUCKS2008 FORD MDL. F350 CAB, chassis, dual rear tires on sgl. axle, gooseneck ball hitch. (Location F)2006 FORD MDL. 150 CREW CAB PICKUP TRUCK, bed cover system, running boards, gray, ODO approx. 160,000. (Location F)CHEVROLET MDL. C5500 DURAMAX, crew cab, diesel engine, 5th wheel hitch, stake bed w/headache rack. (Location B)(2) 2001 FORD F550 WELDING BOTTLE SUPPLY FLATBED TRUCKS, Triton V10 engine, ODO reads 180,288 on VIN 1FDAF56711EC13917 and 181,903 on VIN 1FDAF56512EB32386. (Location F)

ALUMINUM AIR RIDE TRAILER

2008 BENSON 48', 102" w., spread axle, air ride suspen-sion (new air bags installed 3/2013) and (slack adjusted 3/2013), all new tires, VIN 5DMFABTB2BC002385. (Location E)

GOOSENECK TRAILERS2011 30' L. DIAMOND C FLEETNECK SERIES, tandem axle, dual wheel, 22,500 lb. GVWR, stake sides, sway control, VIN: 46UFU3022B1132425. (Location L)

2011 24' L. DIAMOND C FLEETNECK SERIES, tandem axle, dual wheel, 22,500 lb. GVWR, stake sides, VIN 46UFU2420B1135439. (Location L)

SHOP SUPPORT EQUIPMENTDAYTON 12" FLOOR TYPE DRILL PRESS; OSHA APPROVED BOTTLE STORAGE RACK; DIP VAT; ALUMINUM 3-SECTION WASH TANK; H-FRAME PRESSES; LADDERS; RETRACTABLE HOSE REELS; CHAIN HOISTS; BENCH TOP DBL. END GRINDER; BARREL DOLLIES; LB WHITE TRADES-MAN 155 and 170 SHOP HEATERS; BENCH VISE; COME-A-LONG; HELPER STANDS; GARDEN TOOLS; TORCH CARTS; ASSORTED UNUSED LU-BRICANTS; COPPER TUBING; FITTINGS; HAND TOOLS; CIRCULAR SAW; SHOP VACUUMS; TANK SPRAYERS; EXTENSION CORDS; (50+) PNEUMAT-IC 3/8" DRILLS; SIOUX 3/4" PORTABLE ELECTRIC HEAVY DUTY ELECTRIC DRILL, Cat. #1575R, 400 RPM, reversible, removable rear handle and offset helper bar, 110 volt, 10 amp, S/N A3550; GRAY MDL. LTL-400 15 T. CAP. PNEUMATIC TRUCK LIFT JACK; 48" RD. SHOP FAN; PLASTIC UTILITY SHOP CART, parts trays on both sides, fold-up/down edges on tbl. top. (Location A)

BANDING CARTS; SHOP FANS; FIRE EXTINGUISH-ERS; ELECTRICAL BREAKERS; WIRE CONNECTORS; FASTENERS; HELPER STANDS; HAND TOOLS; WELD-ING ROD; WELDING WIRE; WELDING LEADS; CAR-BON MONOXIDE MONITOR; SAFETY HARNESSES; TUNGSTON ELECTRODES; REDI HEATER PRO 1000 SHOP HEATER; LARGE CASTERS; COOPER LIGHTING SHOP LIGHT FIXTURES; MORE. (Location F)

MISCELLANEOUS EQUIPMENT

RIDGID PIPE THREADER; W(3) EVERETT MDL. 20C CHOP SAWS w/20" blades; INGERSOLL RAND AIR COMPRESSOR, 4-cylinder, S/N E84-937; (2) IN-TERFACE CONTROLLERS; (9) AFTEK WELDING GRIDS; (5) UNIVERSAL 50,000 BTU PROPANE HEATERS; (4) UNIVERSAL 75,000 AND 125,000 BTU PROPANE HEATERS; ADDRESSOGRAPH MDL. 6400 TAG MACHINE; (4) 18" FLEX JOINTS, unused. (Location G)

INSPECTION: Monday–Wednesday, July 8, 9, & 10, 9:00 A.M.–4:00 P.M.

& Morning of Sale. Other Times Available by Appointment.

2009

2008

2009

2005

10 11

hySter 8,000 lB. CaP. lPg ForkliFt

Partial view oF material handling equiPment

drexel 4,000 CaP. narrow aiSle Swing maSt eleCtriC ForkliFt

taylor 30,000 lB. CaP. mdl. ty300S dieSel ForkliFt

P&h mdl. 650a 50 t. truCk Crane

LATTICE BOOM TRUCK CRANE

P&H MDL. 650A 50 T. CAP., 90' boom: (2) 30', (1) 20' and (1) 10' section, Cum-mins 6-cyl. power on hoist system, two winches, 3-sheave block. Cummins 6-cyl. power on carrier w/5-spd. manual trans-mission, hyd. outriggers, S/N 37798. Carrier Ord. #854500. UNDER POWER. SEE VIDEO. (Location C)

LARGE CAPACITY FORKLIFTS

CLARK 35,000 LB. CAP. MDL. C500Y-350D, Perkins 6-cylinder diesel engine, auto. trans., 115" standard mast, 120" lift height, 8' forks, 5,500 H.O.M., pneu. tires, S/N Y2030-03-7020CB. (Location A)

TAYLOR 30,000LB. CAP. MDL. TY300S, 30,000 lb. cap. @ 24" load center, short wheel base machine 110", 17' max. lift ht., 14' lowered mast ht., 4' free lift, 453 De-troit Diesel engine, power shift trans, 1200 x 20 tires, 90" forks, side shift, fork positioners, CAB, 3,332 H.O.M., S/N 14707. (Location C)

FORKLIFTSCLARK 10,000 LB. CAP. MDL. CGC50, new 2004, LPG, 3-stage mast, cushion tires, 6' forks, S/N CGC470L-0038-6768FB. (Location F)

HYSTER 8,000 LB. CAP. MDL. H80FT, new 2011, LPG, 89" triple-stage mast, 194" lift height, 48" forks, pneu. tires, side shift, S/N P005C04957J. (Location A)

HYSTER 8,000 LB. CAP. MDL. H80FT, new 2006, LPG, 83" triple-stage mast, 173" lift height, 48" forks, pneu. tires, side shift, S/N N005V01761D. (Location A)

(2) HYSTER 8,000 LB. CAP. MDL. S80XM, new 2005, LPG, 83" standard mast, 122" lift height, 42" forks, cushion tires, S/N F004V03400C, S/N F004V03-418C. (Location A)

HYSTER 8,000 LB. CAP. MDL. S80XL, new 1999, LPG, 83" triple-stage mast, 171" lift height, 42" forks, cushion tires, side shift, S/N D004D07059W. (Location A)

TOYOTA 7,000 LB. CAP. MDL. 8FGCU32, new 2010, LPG, 88" triple-stage mast, 187" lift height, 42" forks, cushion tires, side shift, S/N 13894. (Location A)

HYSTER 6,000 LB. CAP., Mdl. H60C, gasoline engine, 83" 2-stage mast, pneu-matic tiers, 48" forks, S/N C5D2150F. (Location L)

TOYOTA 5,000 LB. CAP. MDL. 8FGCU25, new 2010, LPG, 83" triple-stage mast, 187" lift height, cushion tires, side shift, S/N 27323. (Location A)

TOYOTA 5,000 LB. CAP. MDL. 7FGCU25 QUAD MAST, new 2004, LPG, 83" four-stage mast, 240" lift height, cushion tires, side shift, S/N 86399. (Location A)

(3) HYSTER 5,000 LB. CAP. MDL. S50XM, new 2003, LPG, 83" triple-stage mast, 189" lift height, 42" forks, cushion tires, side shift, S/N D187V29002A, S/N D187V29005A, S/N D187V29057A. (Location A)

SWING MAST NARROW AISLE

ELECTRIC FORKLIFTDREXEL 4,000 LB. CAP. MDL. SL44/4, new 2000, recently reconditioned, 115" mast height, 261" max. lift height, 42" forks, 48 v. charger, full free lift, Clearview mast, new cushion tires, unit operates in 6' W. aisles, 4,259 H.O.M., S/N 960027-523. UNDER POWER. SEE VIDEO. (Location E)

ELECTRIC FORKLIFTTCM 3,600 LB. CAP. MDL. FCB20E3, 189" max. lift height, 42" forks, 3-stage mast, 36 v. system, side shift, charger, S/N A72F00493. (Loca-tion B)

ELECTRIC FLOOR SCRUBBERTENNANT MDL. 5700ES WALK-BEHIND TYPE, battery charger. (Loca-tion H)

VACUUM TYPE SHEETLIFTERVAC-U-LIFT MDL. 3200-6-2-4-4-B10, 1,660 lb. max. cap.–(4) 415 lb. pads, S/N 89-29-4668-1. (Location K)

MATERIAL HANDLING EQUIPMENTFORKLIFT BARREL LIFTING ATTACHMENT; BARREL TRANSPORT DOLLY; HK PORTER HYDRAULIC NUT SPLITTER; (2) CHISOLM-MOORE MDL. CYCLONE 1/2 T. CAP. CHAIN FALL HOISTS; LARGE GEARED HEAD TROLLEY; (2) HW FOOT OPERATED 1,000 LB. JACKS; 1 T. CAP. RATCHET OPERATED BUMPER JACK. (Location A)(5) 6' X 4' SCRAP BINS; (2) ADJUSTABLE ARM SINGLE-SIDED CANTILEVER TYPE MATERIAL RACKS; FABRICATED PLATE RACKS; ADJUSTABLE PALLET RACKING; FABRICATED WELDING TBLS.; ROLLER CONVEYOR; PIGEON HOLE SHELVING; FASTENALL PARTS CABINET; PALLET JACK. (Location F)

OFFICE EQUIPMENTRICOH MDL. 5510L DUAL LINE FAX MACHINE, (2) Super G3 modems, (2) 500 sheet paper supply trays, auto. document feeder, all-in-one unit copier/fax/printer/scanner, Energy Star compliant. (Location A)FILING CABINETS; CALCULATORS; DESKTOP ACCESSORIES; PENCIL SHARPENERS; MORE. (Location A)

CNC HORIZONTAL TABLE TYPE BORING MILLAVAILABLE FOR PRIVATE NEGOTIATON

LOCATED IN HOUSTON TEXASGIDDINGS & LEWIS 6" MDL. G60T, new 1997, G&L 8000B CNC control, 40" x 60" removable CNC contouring tbl., 25,000 lbs. rotary tbl. load cap., 60" x 120" tbl., 60,000 lb. tbl. load cap.,120" tbl. cross travel, 96" vert. headstock travel, 50" saddle travel, 255" saddle length, 36" spndl. travel, Cat-50 spndl., spndl. spds.: 12–2,500 RPM,40 HP, 100 tool ATC, dbl. outriggers, coolant through spndl., Renishaw probe, S/N 450-0353-97.Call Ron Braman at (713) 691-4401 to schedule an inspection.

2011

RECONDITIONED

LARGECAPACITY

QS-0017589

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

ONE DAY SALE OF SURPLUS EQUIPMENT FROM

(11) LOCATIONS ACROSS TEXAS & OKLAHOMA

As New As 2011 Featuring:CNC & Manual Machine Tools & Fab

& Welding Equipment; Heat Treat; Sand Blast; Q.C. & Testing; Plant Support; Trucks; Trailers;

Truck Crane; Forklifts; More.

Theater-Style Auction in

HOUSTON, TEXAS

AUCTION

PUBLIC INVITEDAUCTION: THURSDAY, JULY 11 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

UNABLE TO ATTEND?Bid on-line in real time at TO PARTICIPATE YOU MUST:

1. Register at www.BidSpotter.com. DO IT NOW. 2. Either wire transfer, or mail a cashier’s check deposit in the

amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO A 16% BUYER’S PREMIUM.

EQUIPMENT LOCATION INDEXLOCATION A: Conroe Storage Facility, Stone Machinery Movers Warehouse, 3 Clarke Drive, Conroe, Texas 77301LOCATION B: Houston Storage Facility

14309 Sommermeyer Street, Houston, Texas 77041LOCATION C: Warfab, Inc.

350 Joy Lane, Hallsville (Longview area), Texas 75650LOCATION D: NAES Corp.

7618 Bluff Point Drive, Houston, Texas 77086LOCATION E: Fisher Equipment

8127 Easthaven Blvd., Houston, Texas 77034LOCATION F: Angleton Storage Facility

200 Henderson Road, Angleton, Texas 77515LOCATION G: Team Fabricators, LLC

650 Main Avenue, Port Arthur, Texas 77642LOCATION H: Parker Instrumentation

6575 Tram Road, Beaumont, Texas 77713LOCATION J: Oklahoma City, Oklahoma. Call Ron Braman at

(713) 691-4401 for appointment to inspect.LOCATION K: Mac Process Inc.

13813 FM 529, Houston, Texas 77041LOCATION L: Four Seasons Development Co.

5825 W. Sam Houston Pkwy. N., Houston, TX 77041Information and driving directions are on

PMI’s website auction calendar page for July 11 or call (713) 691-4401

DIRECTIONS TO HOTEL BALLROOM AUCTION SITE

FROM GEORGE BUSH INT'L AIRPORT: Take JFK Blvd./Airport Rd. south to Beltway 8. Turn right (west) on Beltway 8 and pro-ceed onto I-45 North. The first exit traveling north on I-45 will be Exit 62 for Airtex Dr. Exit and turn left (west) onto Airtex Dr. The Holiday Inn Express & Suites auction site will be just ahead on your left. Watch for auction signs.

LODGING/AUCTION LOCATIONHoliday Inn Express & Suites .............................. (281) 876-7378125 Airtex Drive, Houston, Texas 77090

PARTIAL TERMS & CONDITIONS A 13% Buyer’s Premium Will Apply On-site.A 16% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bid-ders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until August 12, 2013.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated dam-ages. All items must be removed by the time an-nounced at the start of the sale.Lots not paid for and/or removed within the time al-lowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has in-spected all of the assets upon which he will be bidding and/or does purchase.Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being pur-chased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of in-surance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportu-nity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postpone-ment. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by an-nouncement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.