AUCTION - vihn.netpmi.vihn.net/auction/Files/5_42146_PMI June 19 Multi-Location Revised.pdf2 3 taiyo seiki mdl. 4-t axelson 22-1/2" x 78", saddle type turret lathe mori seiki mdl.

ITEMS AT (15) LOCATIONS IN TEXAS, CALIFORNIA & LOUISIANAFeaturing: CNC & MANUAL Boring Mills, Hollow Spindle & Engine Lathes; Drills; Grinders; Gear Machines; Drop Hammer; Stress Relief Oven, CNC & MANUAL Brakes, Burning Machines and Tube Benders; Shear; Ironworkers; Saws; Welding Positioner & Manipulator; Seam Welder; Welders; Coating & Laminating

Line; Material Handling, Wrapping & Winding Equip.; Wax Filler; Industrial Sewing Machines; Air Handlers new in 2009; Dust Collectors; Fire Pump; Compressors; Transformers; Phone System; Office F&F; Trade Show Booth; PLUS: (20) Forklifts up to 50,000 lb. cap. new as 2011; Tugger; Van; More!!

Theatre-Style Digital Color Slide Auction to be Conducted Off-Site at the

HOLIDAY INN & SUITES125 Airtex Dr., HOUSTON, TX 77090

(See Directions on Back Page)

INSPECTION: Wednesday

June 18 9:00 A.M. to 4:00 P.M. &

By Appointment

AUCTION: THURSDAY JUNE 19

10:00 A.M.

Name ST LIC. #0000000Name ST LIC. #0000000

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

AUCTION

Read Partial Terms and Conditions on Back

Page of Brochure

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: [email protected]: www.pmi-auction.com

Ron Moore TX Lic. #7314HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

On-Site Bidding in Houston, TX

or Bid Via Webcast at

BUYER’S PREMIUM: 15% ONSITE

18% VIA WEBCAST

MAZAK 34" HOLLOW SPINDLE OIL COUNTRY LATHE

LEBLOND 46" X 30' MDL. 4025-32 LONG BED HEAVY DUTY ENGINE LATHE

>RIGGER LIFT 50,000 LB.

CAP. RIGGING TYPE FORKLIFT

>MAZAK POWERMASTER N CNC

HOLLOW SPINDLE OIL COUNTRY LATHE

<COATING/LAMINATION COMPLETE FRONT END PROCESSING EQUIPMENT

<5" GIDDINGS & LEWIS MDL. G50TX CNC TABLE TYPE HORIZONTAL BORING MILL

CNC

2011

RETROFIT2009

14.25"

HOLE

10.25"

HOLE

46" X 30'

CNC

2 3

54" BULLARD SPIRAL DRIVE VERTICAL TURRET LATHE

KINGSTON 30" HOLLOW SPINDLE OIL COUNTRY LATHE

MAZAK 30" HOLLOW SPINDLE OIL COUNTRY LATHE

MAZAK MDL. VQC20/50B VERTICAL MACHINING CENTER

HOLLOW SPINDLE OIL COUNTRY LATHES

MAZAK 34", Mdl. 34, 14.25" spndl. bore, 34" sw. over bedways, 120" max. dist. btwn. cen-ters, 14.25" dia. hole through spndl., front and rear through hole chucks, taper attach., 26" max. sw. over crosslide, infinitely variable spd. range to 300 RPM, S/N C-193. (Location A) See Cover Photo

MAZAK 30", 12.5" spndl. bore, 30" sw. over bedways, 120" dist. btwn. centers, 300 RPM, 15kW main motor, front and rear 4-jaw chucks, taper attach., tailstock, coolant, S/N 186W. (Location A)

KINGSTON 30", new 2007, Mdl. HK-3000, 12.5" spndl. bore, 30" sw. over bedways, 20.5" sw. over crosslide, 118" dist. btwn. centers, spds: 5–300 RPM, front and rear 4-jaw chucks, steadyrest, taper attach., 20 HP main motor, S/N 03870612G. (Location A)

CNC LATHESMORI SEIKI MDL. LL-7, Fanuc 6TB CNC cntrl., 42.9" sw. over bed, 20.4" sw. over crosslide, 6.75" hole through spndl., 31.5" dia. chuck, 50 HP main motor, spndl. spds: 6–1,150 RPM, (2) 4-pos. turrets, tailstock, chip conveyor, (also w/guards and doors not pictured), S/N 150. (Location A)

MAZAK MDL. M-4, 22" sw. over bed, 11" over cross slide, 60" btwn. centers, Mazatrol T-1 CNC cntrl., 3-1/8" spndl. hole, ASA A2-8" spndl. nose, MT 5 taper, 4-11/16" front spndl. dia., 4-5/16" rear spndl. dia., 13–2,200 RPM spndl. spds., 8-pos. oct. disc turret, 6-pos. hex. boring turret, 20 HP, coolant, hard ways, chip conveyor, 12" 3-jaw pwr. chuck, turret tooling, in plant under pwr., S/N N.A. (Location K)

ENGINE LATHESCRAVEN 58" SW. X 156" CENTERS, 12" raised, (16) spndl. spds: 4–400 RPM, 1-1/2" spndl. hole, 48" sw. over crosslide, 28-1/4" W. bed, 40" 4-jaw faceplate type chuck, toolpost, 20 HP, pwr. rapid traverse, tailstock, inch/metric thdng., S/N 17235/2 T956. (Location A)

TUDA 49.5" SW. X 118" CENTERS JUMBO 1250 X 3000 GAP BED, 65" sw. in gap, 35.8" sw. over carriage, 22" L. gap, spds.: 6–590 RPM, 3.14" spndl. hole, #6 MT tailstock taper, inch/metric thdng., 30 HP, 39" 4-jaw chuck, tool post, steadyrest, S/N 80007. (Location A)

LEBLOND 46" X 30' MDL. 4025-32 LONG BED HEAVY DUTY, 46" max. sw. over bedways, 30' max. dist. btwn. centers w/additional 36" bed extension, 36" dia. 4-jaw chuck, 3" hole through spndl., 34" W. bedways, (2) steady-rests, toolholder, S/N 3NK919. (Location A) See Cover Photo

CNC TABLE TYPE HORIZONTAL BORING MILL

5" GIDDINGS & LEWIS MDL. G50TX, Fanuc Oi-MD CNC cntrl. (retrofit 2009), 5" spndl., #50 taper, 36" spndl. trvl., 14–3,000 RPM spndl. spds., 48" x 120" tbl., 40,000 lb. load, 120" tbl. cross trvl., 96" hdstk. vert. trvl., 91" above tbl., 255" saddle length, 50" saddle trvl., 0.01–150 IPM feeds, 30 HP, 42" x 42" Producto rot. tbl., 24" dia. Producto trunnion rot. tbl., 40-tool ATC, dbl. outriggers, coolant, pendant, auto. lube, (2) angle plates, in plant under pwr., S/N 450-309-93. (Location K)

HORIZONTAL BORING MILL4" LUCAS TABLE TYPE, 48" x 74" tbl., 4" spndl., spds.: 9–1,200 RPM, Travels: 25" spndl., 48" vert., 60" cross, 60" long, 103" max. nose to outboard sppt., #5 MT spndl., feed range: .001–1.038 IPR, 20 HP, Digiline 2-Axis DRO, pendant, outboard sppt., outriggers, OAD: 214" x 103" x 110", S/N 42B0818. (Location A)

CNC VERTICAL MACHINING CENTERRIFA MDL. RFMV105, 49.1" x 21.6" tbl., 1,760 lb. load, 41.3" X-axis trvl., 23.6" Y-axis trvl., 23.6" Z-axis trvl., 5.5"–29.1" spndl. to tbl., 25.2" spndl. to col., 7,000 RPM spndl. spd., ISO 40 taper, 10/15 HP, 24-tool ATC, Fanuc 0i CNC cntrl., in plant under pwr., S/N N.A. (Location K)

MAZAK MDL. VQC20/50B, 21.6" x 48.8" tbl., 1,764 lb. load, 39.4" long. tbl. trvl., 20" spndl. trvl., 18.1" vert. spndl. trvl., 12.6" col. face to spndl. center, 7.9"–26" tbl. to spndl., 24-tool ATC, #50 CAT spndl. taper, 20–3,150 RPM spndl. spds., 15 HP, Mazatrol CAM M-2 CNC cntrl., chip conveyor, coolant, in plant under pwr., S/N N.A. (Location K)

VERTICAL TURRET LATHESBULLARD 42" CUTMASTER, 42" plain tbl., pwr. turret, spds: 5.5–200 RPM, side head w/4-pos. turret, 30 HP main drive motor, S/N 27355. (Location A)

54" BULLARD SPIRAL DRIVE, 50" 4-jaw chuck tbl., 56" sw., 35-1/2" under rail, 48-1/2" under turret face, tbl. spds (12), 3.5–60 RPM, (16) feeds, 0.002–0.500 IPR, 27" vert. turret head trvl., 56" hor. turret head trvl., 29" vert. side head trvl., 25 HP, 5-pos. turret head, 4-pos. side head, fine feeds, pwr. rail elev., pwr. rapids, plant under pwr., S/N 21308. (Location K)

CNC HOLLOW SPINDLE OIL COUNTRY LATHE

MAZAK POWERMASTER N, Mazatrol T-Plus CNC cntrl., 35" max. sw. over bed, 43" max. sw. in gap, 10-1/4" hole through spndl., front and rear 23-1/2" dia. 4-jaw chucks w/10-1/2" through holes, 10' max. dist. from face of chuck to tailstock, 4-sided I.D. turret, 8-pos. O.D. turret, electrical cabinet, hyd. unit, transformer, full length chip conveyor, protective guards and doors, S/N 133243. (Location A) See Cover Photo

5" GIDDINGS & LEWIS MDL. G50TX CNC TABLE TYPE HORIZONTAL BORING MILL

CNC

RIFA MDL. RFMV105 VERTICAL MACHINING CENTER

CNC

RETROFIT2009

12.5"

HOLE 12.5"

HOLE

See Back Page for Equipment Location Index

CNC

2007

2 3

TAIYO SEIKI MDL. 4-T SADDLE TYPE TURRET LATHE

MORI SEIKI MDL. LL-7 CNC LATHE (W/COVER REMOVED)

ENGINE LATHES, CONTINUEDKINGSTON 26" X 120", new 2006, Mdl. HK26120, 4-jaw chuck, taper attach., 4-way toolpost, inch/metric thdng., Trav-A-Dial thread dial, S/N CH06990. (Location B)MONARCH MDL. 25'N, 33.5" actual sw., 120" max. dist. btwn. centers, S/N 42298. (Location B)AXELSON 25" X 120", Mdl. 25/16, 2-1/4" hole, taper, 18" chuck, S/N 4995. (Location M)AXELSON 22-1/2" X 102", Mdl. 20, 21" dia. 4-jaw chuck, taper, 15 HP motor, taper, S/N 4613. (Location M)AXELSON 22-1/2" X 80", Mdl. 20, 15" dia. 3-jaw chuck, 1.5" hole, 15 HP motor, taper, S/N 4542. (Location M)AXELSON 22-1/2" X 78", Mdl. 20, 15 HP, 1-1/2" hole, taper, no chuck, S/N 4524. (Location M)AXELSON 22-1/2" X 69", Mdl. 18, 2" hole, 12" dia. 3-jaw chuck, taper, 15 HP (est.) motor, no tailstock, S/N 2734. (Location M)AXELSON 20-1/2" X 120", Mdl. 18, 2" hole, taper, 15" chuck, S/N 3575. (Location M)AXELSON 20-5/8" X 93", Mdl. 18, 2-1/4" hole, 19" dia. 4-jaw chuck, no tailstock or toolholder, S/N 2398. (Location M)AXELSON 18-1/2" X 150", Mdl. 16, taper, no chucks, 10 HP motor, S/N 4554. (Location M)AXELSON 18-1/2" X 78", Mdl. 16, 1-1/2" hole, 12" dia. 3-jaw chuck, taper, S/N 3543. (Location M)JET 18" X 60" GAP BED TYPE, 20" sw. in gap, 12" 4-jaw chuck, hardened and ground bedways, spds.: 40–1,600, thdng., 3" spndl. hole, toolpost, steadyrest, follow rest, 5.5kW motor, 220/440. (Location E)

SADDLE TYPE TURRET LATHETAIYO SEIKI MDL. 4-T, 12-5/8" spndl., 75 HP main motor, 38" (est.) sw. over bed, 6-pos. crossliding turret w/(6) various flanged toolholders and (2) boring bars, front and rear taper attachs., full length leadscrew thdng. w/quick change gearbox, spndl. spds: 20–530 RPM, thread range from 1–36 TPI, 31" dia. 3-jaw chuck w/12-5/8" hole, S/N 764010. (Location A)

RAM TYPE TURRET LATHEHERBERT #5 SENIOR PREOPTIVE MONOSLIDE, 15.75" max. sw., 8.75" sw. over crosslide, 2.5" spndl. hole, 24" working centers; 17.75" turret stroke; 10 HP, spds.: 21–1,500, assorted tool-ing, S/N 3211526 S. (Location E)

VERTICAL TURRET MILLACRA 12" X 58", new 1996, Mdl. AM-5V, 5 HP, pwr. tbl. and knee feeds (one is new), 8" riser, spds.: 50–3,750, pendant cntrl., Newall C80 2-axis DRO, 240/480, S/N 961459. (Location E)

RADIAL DRILLSCINCINNATI BICKFORD 6' X 19", drills to center of 144" circle, (36) spndl. spds: 8–1,000 RPM, (18) spndl. fds: .004–.125 IPR, tap leads: 8, 11-1/2, 14, 18, 20, 27 TPI, No. 6 MT spndl., 20 HP, pwr. elevation, pwr. clamping, pwr. head traverse, box tbl., S/N 6E-931. (Location A)AMERICAN 6' X 17", drills to center of 144" circle, spndl. spds: 20–1,600 RPM, 18" spndl. travel, No. 5 MT, fds: .003–.125 IPR, tap leads: 8, 11-1/2, 14 and 18 tap leads, 48" vert. arm travel, approx. 20 HP, box tbl., pwr. elevation, pwr. clamping, coolant, S/N 72449. (Location A)

YOSHIDA (YUASA), 5' arm, 12" dia. column, 1,800. (est.) max. RPM, box tbl., S/N 6082030. (Location B)

HORIZONTAL EJECTOR DRILLS(2) NATCO, 32" x 80" work platform, 55" (est.) horiz. travel, sharing high-pressure coolant system, S/N S-4450 w/Allen Bradley 7100 cntrl. and manual clamping and S/N S-4451 w/manual cntrls. and hyd. clamping and (1) 2-tube type high-pressure coolant. (Location M)

SHORT STROKE GUN DRILL. (Location M)

>MONARCH MDL. 25’N

ENGINE LATHE

>ACRA 12" X 58"

VERTICAL TURRET MILL

<TUDA 49.5" X 118" JUMBO GAP BED LATHE

<KINGSTON 26" X 120" ENGINE LATHE

<CINCINNATI BICKFORD 6' X 19" RADIAL ARM DRILL

AUCTION: THURSDAY JUNE 19

10:00 A.M.

INSPECTION: Wednesday, June 18, 9:00 A.M. to 4:00 P.M. & By Appointment

2006

CNC

12-5/8"

HOLE

6.75"

HOLE

75 HP

5 HP

4 5

GOULD & EBERHARDT MDL. 72H GEAR HOBBER

MATTISON 42" X 48" X 144" LARGE CAPACITY RECIPROCATING TYPE SURFACE GRINDER

FELLOWS MDL. 6 GEAR SHAPER

INDUSTRIAL REFRACTORY SERVICES CAR BOTTOM STRESS RELIEF OVEN

LARGE CAPACITY RECIPROCATING TYPE SURFACE GRINDER

MATTISON 42" X 48" X 144", 44" x 144" magnetic chuck (3–48" sections), neutrofier, wheel dresser, 48" max. dist. wheel to tbl., 75 HP main motor, coolant system, S/N 20889. (Location A)

VERTICAL UNIVERSAL GRINDERSPRINGFIELD MDL. 3TR, 42" tbl., 52" max. sw., 48" dist. under column, Springfield spndl. unit, coolant system, self-contained hyd. unit, pendant cntrl., S/N 54167. (Location A)

PLAIN INTERNAL GRINDERHEALD MDL. 276 W/48" EXTENDED BRIDGE, 18" sw. over bridge, 30" sw. over ways, 72" chuck to spndl., 16" 4-jaw chuck, Red Head #496-18 11,000 RPM spndl., Baldor Inverter, steadyrest, coolant/oil pump/tank, taper to tbl., 5 HP spndl. motor, 1.5 HP wheel head, rapid traverse, S/N 42727. (Location A)

ABRASIVE FLOW DEBURRING MACHINEDYNAFLOW PROCESS MDL. HL60CF-830, (2) fixture bases, 25 HP internal hyd. system, 2-station rotating fixture, media cooler system. (Location A)

SPLINE HOBBING MACHINEPFAUTER MDL. 312/1932; RS8, 148" bed length, 12" dia. 4-jaw chuck, 10" sw., spiral hobbing. (Location B)

GEAR HOBBERGOULD & EBERHARDT MDL. 72H, 72" dia. cap., 40" tbl. w/10.5" through hole, change gears, S/N 2880A8. (Location B)

GEAR SHAPERFELLOWS MDL. 6, 36" dia. cap., 6" stroke, S/N N.A. (Location B)

DROP HAMMERCHAMBERSBURG CECOSTAMP 48" X 56", 3,000 lb. cap., 48" x 56" bed, 48" dist. floor to top of bottom die area, 48" x 35-1/2" top die ram , 34" x 25-1/2" min. die area, 46" approx. max. die opening, 84-1/2" x 42-1/2" x 12-1/2" thck. bottom base area, 48" dist. btwn. way on columns, 48" x 37" x 2-1/2" thck. T-slotted bolster plate, disassembled, S/N 2037. (Location A)

CAR BOTTOM STRESS RELIEF OVENINDUSTRIAL REFRACTORY SERVICES, new 2007, interior dims: 9' W. x 18' dp. x 8' ht., work area on cart: 8' W. x 17' dp. x 6' ht., rail mtd. car w/winch, soft fiber refractory, chart recorders, S/N 27050. (Location C)

PRECISION MACHINE ACCESSORIES & TOOLING(2) SHUTER NC/CNC TOOL CARTS FILLED w/assorted tooling; NAREX BORING HEADS UP TO 4"; RENISHAW MDL. MP9 PROBE w/M17 machine interface; NEWALL MDL. DP7 D.R.O.; JOB BOSS DATA COLLECTION SYSTEM w/keypads and handheld scanners; COLLET SETS; 36" HT. X 18" W. TOMBSTONE TYPE 4-SIDED MACHINING FIXTURE; 8" ROTARY INDEXER w/tailstock; 12" X 12" T-SLOTTED TILTING TABLE; (2) 7" LONG THROW MACHINE VISES; CARBIDE BORING BARS and INSERT TOOLHOLDERS; DRILL BITS; SPADE DRILL BLADES; CARBIDE MILLING CUTTERS; TAPS; REAMERS; HERBERT COLLET CHUCKS; BRIDGE-PORT REIGHT ANGLE MILLING HEAD w/arbor and support. (All Location E)

QUALITY CONTROL & MEASURING INSTRUMENTSMITUTOYO O.D. MICROMETER SET, from 0–25 mm up to 275–300 mm; PINPOINT LASER SYSTEMS MDL. MICROGAGE 1000 LASER w/Robosquare; REFRACTOMETER; MACHINIST SQUARE; 28" DIAL HEIGHT GAUGE. (Location E)

CNC PRESS BRAKEDIACRO 35 T. X 6', Mdl. 1472, hydro-mechanical design, Hurco Auto Bend IV CNC cntrl., 6' W. x 14 ga. cap., 62" btwn. housings, 2" stroke, 9" shut ht., spds.: 6–24 SPM, 9" throat, 24" back range, 2-spd. ram, 3 HP, pallet w/tooling, S/N A8023020. (Location G)

PRESS BRAKEPACIFIC 5/16" X 10' CAP. MDL. K225-12, hydraulic, requires pit, S/N 5861. (Location P)

BOX & PAN BENCH BRAKETENNSMITH 4' W. x 16 GA. CAP., Mdl. U48-16, S/N 27656. (Location N)

POWER SQUARING SHEARDIACRO 10 GA. X 6.5' CAP., Procam Type GTH-420, (9) holdowns, front op. pwr. back gauge, 30" back gauge range, 7.5 HP, sq. arm, front support arm, S/N 331. (Location G)

IRONWORKERSMETAL MUNCHER 135 T. CAP. MDL. GB-135-18, gap frame hydraulic, 1-11/16" x 1" punch capacity, 18" throat, S/N 01120296. (Location A)PIRANHA 90 T. CAP. MDL. P-4, hydraulic, 6" x 6" angle shear punch rated 1" dia. through 1" plate, 12" brake and plate shear, S.N. N.A. (Location A)

ASSORTED QC EQUIPMENT INCLUDING MITUTOYO MIC. SET

PARTIAL VIEW PRECISION MACHINE ACCESSORIES

On-Site Bidding in Houston, Texas or Bid Via Webcast at

<SPRINGFIELD MDL. 3TR VERTICAL UNIVERSAL GRINDER

2007

INSPECTION: Wednesday,

June 18 9:00 A.M. to

4:00 P.M. & By

Appointment

4 5

PIRANHA 90 T. CAP. MDL 9-4 IRONWORKER

DIACRO 35 T. X 6' CNC PRESS BRAKE

JETLINE MDL. LWS-48 EXTERNAL SEAM WELDER

DIACRO 10 GA. X 6.5' CAP. POWER SQUARING SHEAR

COATING/LAMINATION COMPLETE FRONT END PROCESSING EQUIPMENT

ESAB MDL. SABRE SBX3500 VIS 52 CNC PLATE BURNING MACHINE

KOIKE ARONSON 10' X 10' MANIPULATOR

CNC PLATE BURNING MACHINEESAB MDL. SABRE SBX3500 VIS 52, new 2006, Esab CNC cntrl., (4) oxy./acy. burning heads, 10' x 20' burning tbl. (Location B)

FLAME CUTTING SYSTEMCUTTING SYSTEMS, INC. MDL. 5, new 2001, 6-head oxy. fuel machine, Burny 10 control/software, 32' track x 13' wide cutting area, dual drive, Servo Pack 250. (Location L)

SAWSMARVEL SERIES 8 MITERING VERTICAL BANDSAW, 17-1/2" throat, 33" x 25" table, S/N N.A. (Location A)BEWO TYPE 250 LT COLD SAW, 10" steel blade, water cooled, 0.55/1.1kW motor, pedestal mounted and welded on structural steel base, S/N 1505-07-93. (Loca-tion A)AUTOMATIC CUT-TO-LENGTH LINE FOR TIMBER, PLC control. (Location E)CTD DOUBLE-END ADJUSTABLE MITER SAW. (Location E)

CNC TUBE BENDERPINES MDL. 5, more specs to follow – See catalog. (Location L)

SEMI-AUTOMATIC TUBE BENDERPINES #5 VERTICAL w/Control-A-Bend cntrl., Mdl. CAB-2-VERTICAL. (Location L)

H-FRAME PRESSK.R.WILSON 50 T., Mdl. 37E-MD-4, hydraulic. (Location E)

WELDING POSITIONERKOIKE ARONSON 10,000 LB. CAP., new 2006, Mdl. HD100VF, 6"–60" chucking cap., pwr. tilt and rotation, S/N 42407. (Location B)

SUB-ARC WELDING MANIPULATORKOIKE ARONSON MDL. 99–10x10, new 2006, 120" elevation, 120" reach, Sub-Arc system w/wire feeder, Lincoln Mdl. DC-1000–1000 amp pwr. source, S/N U-1061007132, manipulator, S/N 42107. (Location B)

EXTERNAL SEAM WELDERJETLINE MDL. LWS-48, 0.020"–3/8" thck. cap., 42" work ht., 91" carriage travel, 122" overall length of track, 4" vert. travel of work head, carriage spd. to approx. 139 IPM, Jetline Mdl. SWC-3A, Union Carbide UEC 8 wire feeder cntrl., hi/lo pressure gauges, retractable edge aligning, clamping cntrl., backup mandrel, pressure hold-down, hold-down fingers, S/N 86696. (Location A)

WELDING POWER SOURCES(2) LINCOLN MDL. CV-655, 650 amp, new 2008 w/Lincoln Mdl. LF-72 wire feeders, S/N U1080902223, S/N U1081003130. (Location A)MILLER MDL. DIMENSION NT 450, new 2008, MIG, TIG, Stick & Flux Core capability, 450 amp, Miller S-74D wire feeder, S/N LJ400352C. (Location B)

LINCOLN MDL. CV-400, 400 amp, new 2003 w/Lincoln Mdl. LN-7 wire feeder, S/N U1030404223. (Location A)

WELDING MACHINELINDE MDL. CE-300 300 AMP POWER SOURCE, S/N C-75P7516. (Location L)

MISCELLANEOUS WELDING & CUTTING EQUIPMENTKOIKE TRACK TORCH w/6' track section; MILLER SPOOLMATIC MDL. 30A MIG GUN; TORCH CART w/torch, hose and gauges. (Location E)

COATING/LAMINATION COMPLETE FRONT END PROCESSING EQUIPMENT – SYSTEM INCLUDES:

COATER/LAMINATOR: Up to 44" wide cap. Up to 400 FPM. Includes transmission assembly (“clutch” w/a slip differential) to synchronize rolls and let roll turn freely at thdng. of web. Also includes motor w/encoder to electronically tie coater/laminator to other manufacturing line functions needed.

EXTRUDER: Estimated Output 1 lb./min., includes Conair Automatic Blender w/(4) Feed Supply Bins each w/its own Pellet Access Loader and a Merlin Thermo NES Lab Chiller for Zone #1 of the Extruder.

(3) ZENITH/NORDSON GEAR PUMP FEED PACKAGE: each gear pump w/its own motor, gear box and heated piping and (3) Baldor VS1ST Gear Pump Drives.

CONTROL PANELS: w/SSD Eurotherm Drives w/Remote, Gefran Controllers and pwr. disconnects, all built in an off-the-shop floor Operator’s Work Platform

CONAIR POLYMER PELLET DRYER/HOPPER: included anti-static pellet feed lines to Extruder

DELTA-THERM HOT OIL HEATER.

“HOT LOOP” PUMP SYSTEM W/WENESCO HEATED TANK: 1 Zenith Gear Pump Package. Used to re-circulate excess heated liquid polymer during operation. (All Location A)

MATERIAL WINDERVOORWOOD SLITTER REWINDER, rebuilt 2010, new motor, mandrel, etc., automa-tion tie-in software and hardware, custom mandrel. (Location A)

See Back Page for Equipment Location Index

CNC CNC

20062006

HIGH

SPEED

COATING/LAMINATION COMPLETE FRONT END PROCESSING EQUIPMENT – SYSTEM INCLUDES:

COATER/LAMINATOR: Up to 44" wide cap. Up to 400 FPM. Includes transmission assembly (“clutch” w/a slip differential) to synchronize rolls and let roll turn freely at thdng. of web. Also includes motor w/encoder to electronically tie coater/laminator to other manufacturing line functions needed.EXTRUDER: Estimated Output 1 lb./min., includes Conair Automatic Blender w/(4) Feed Supply Bins each w/its own Pellet Access Loader and a Merlin Thermo NES Lab Chiller for Zone #1 of the Extruder.(3) ZENITH/NORDSON GEAR PUMP FEED PACKAGE: each gear pump w/its own motor, gear box and heated piping and (3) Baldor VS1ST Gear Pump Drives.CONTROL PANELS: w/SSD Eurotherm Drives w/Remote, Gefran Controllers and pwr. disconnects, all built in an off-the-shop floor Operator’s Work PlatformCONAIR POLYMER PELLET DRYER/HOPPER: included anti-static pellet feed lines to ExtruderDELTA-THERM HOT OIL HEATER.“HOT LOOP” PUMP SYSTEM W/WENESCO HEATED TANK: 1 Zenith Gear Pump Package. Used to re-circulate excess heated liquid polymer during operation. (All Location A)

6 7

DONALDSON TORIT MDL. DFO 4-48 DUST COLLECTION SYSTEM

AUTOMATIC PALLET STRETCH WRAPPING SYSTEMLANTECH POWER ROLLER STRETCH WRAPPER, rebuilt 2010, Allen Bradley Data-Liner digital display, recently rebuilt, inclds.: turntbl., conveyor and pallet advancing conveyor sections and gravity feed sections, electric eyes (incl. one or more that recognize the color “black”), automatic operation, S/N A-1014. (Location A)

PALLET LOADING & UNLOADING EQUIPMENTLEWCO MDL. NS-UNLOAD STATION PALLET UNLOADER, new 2010, pneumatic pallet tilter, 240/3/60, S/N 39338-001. (Location A)LEWCO PALLET MDL. NS-LOAD STATION PALLETIZER, new 2010, pneumatic pallet tilter, scissor type pallet lowering/raising system, pneumatic “pusher” to force product into loaded position, 240/3/60, S/N 39338-002. (Location A)

POWER CONVEYORLEWCO 80' L. X 36" W. BELT, new 2010, motor, drive, electric eyes, various equip-ment mounts, (2) belts, inclds. material trolley system w/base trolley assembly, back-up motor, gearbox and wheel items, cntrl. panel, drive, remote keypad, wiring, mounts, etc. (Location A)

ELECTRIC WATER ACTIVATED TAPE/LABEL DISPENSERBETTER PACKAGES MDL. 754 ELECTRONIC TAPER, custom fabricated stand for label feed. (Location A)

COLOR CAMERA MONITORING SYSTEM(5) SWANN COLOR CAMERAS w/infrared, low-light capabilities; (1) SWANN DVR-8 2500 DIGITAL VIDEO RECORDER w/Internet connection; (5) NOVA LT-8508 LCD COLOR MONITORS; (3) DYNEX COLOR MONITORS. (Location A)

PARTS WASHERRAMCO MDL. CM48ESS, 4' W. X 3' dp. X 3' ht., 500 lb. cap., 18kW heater, cycle timer, 1/3 HP circulating motor. (Location E)

WAX MOLD FILLERJBN DESIGN MDL. FH-IV 10-PISTON, new 2004, 1-row, S/N T14-10XFPYADX51304, portable, mtd. on Genie Superlift Advantage Mdl. SLA-5 material lift. (Location E)

(20) INDUSTRIAL SEWING MACHINES(3) JUKI MDL. LH3 578S; JUKI MDL. LH 3178; (2) JUKI MDL. LH 1152-4; (2) JUKI MDL. LH-1152-5; DURKOPP ADLER MDL. K370 990090; ADLER MDL. 449195; ADLER MDL. 440488; ADLER MDL. LT-230; MITSUBISHI MDL. LS2-1180; MITSUBISHI MDL. LS-1180; MITSUBISHI MDL. LS2-190; (3) MITSUBISHI MDL. LT2-230; PFAFF SINGLE NEEDLE. (All Location L)

PACKAGED OUTDOOR AIR HANDLING UNITS(2) AAON MDL. RN-30 30 T. CAP., new 10/2009, minimal usage, provides 100% air exchange w/both temperature and humdity cntrl., water cooled, up to 16 EER rating, 9,000 nominal CFM, incl. optional 36" ht. curbs for ground mounting and horiz. return, large qty. replacement filters, contact auctioneer for additional specs., S/N N.A. (Location F)

DUST COLLECTION SYSTEMSDONALDSON TORIT MDL. DFO 4-48, dry type, airflow: 4,560–38,300 SCFM, 100% efficiency, cartridge type filter, pulse jet cleaning, large qty. replacement bags, minimal usage, blower, S/N IG774980-001. (Location A)DANTHERM BAGHOUSE TYPE W/HIGH CAPACITY BLOWER. (Location E)CUSTOM DUST COLLECTION SYSTEM, 55 HP motor, hoppers, vacuum system, duct work and compactor. (Location L)

FIRE PUMPPEERLESS PUMP, Mdl. S0647412, Spec: 555, Detroit Diesel engine, 475 HP at 2,300 RPM, max. 2,500 RPM, 440 H.O.M., S/N N.A. (Location N)

AIR COMPRESSORQUINCY 25 HP RECIPROCATING TYPE, 2-stage, 120 gal. horiz. air receiver. 230/460. (Location E)

TRANSFORMERSEATON CUTLER-HAMMER 112.5 KVA, class AA DTB, 3-ph., 60Hz, catalog V48M24T12F, frame 915B, sec volts 240 Delta, S/N J03801058; GE 30 KVA, Mdl. 9+123B3872, HV 480 LV 208 LV 120, 3-ph., 60Hz, class AA, S/N KN. (Location E)TRANSFORMER, 225 KVA, 480 Delta, 280V/120. (Location L)

TELEPHONE SYSTEMCISCO MDL. 7941, (21) hand sets. (Location L)

OFFICE FURNITURE & EQUIPMENTDESKS; CHAIRS; CREDENZAS; FILE CABINETS; 3M MDL. OH1800AJB OVER-HEAD PROJECTORS, S/N 325862, S/N 18119658; HEWLETT-PACKARD DESIGNJET 1050C PLUS MDL. C6074B, (2) ink cartridges, S/N SG1641311T; OKI MDL. C9500 PRINTER; BIZHUB MDL. Di3510 COPIER; OFFICE CUBICLES; HARDWARE. (All Location L)

TRADE SHOW SALES BOOTHSALES BOOTH AND SUPPLIES w/rolling storage container that checks on w/luggage. (Location A)

JBN DESIGN MDL. FH-IV 10-PISTON WAX MOLD FILLER

PEERLESS FIRE PUMP<SEVERAL TRANSFORMERS

>AAON MDL.

RN-30 30 T. CAP. PACKAGED

OUTDOOR AIR HANDLING UNIT

<LANTECH POWER ROLLER AUTOMATIC PALLET STRETCH WRAPPING SYSTEM

INDUSTRIAL SEWING MACHINE >

INSPECTION: Wednesday, June 18

9:00 A.M. to 4:00 P.M. & By Appointment

RAMCO MDL. CM48ESS PARTS WASHER

See Back Page for Equipment Location Index

2004

REBUILT

2010

LIKE

NEW20092AVAILABLE

20AVAILABLE

6 7

HYSTER 10,000 LB. CAP. FORKLIFT

RIGGING TYPE FORKLIFTSRIGGER LIFT 50,000 LB. CAP MDL. R50, delivered new in 11/2011, 50,000 lb. cap. at 24" loadcenter, 100" max. lift ht., 112" lowered ht., 10 deg. tilt forward and back, GM Industrial 8.1 liter 496 CI, LPG, 2x2 Powershift trans., power steering, digital function monitor, 8' forks, 40 x 24 solid drive and 35 x 12 solid steer tires, OSHA light safety package, much more, 1,340 H.O.M., S/N 0511-R50-002. (Location Q)HYSTER 15,000 LB. CAP., Mdl. S-150 “Spacesaver”, LPG, telescoping rigging boom, manual trans., 6' forks, new cushion tires, S/N N.A. (Location H)HYSTER 15,000 LB. CAP., Mdl. S-150A “Spacesaver”, LPG, telescoping rigging boom, 84" 2-stage mast, 100" lift. ht., 5' forks, cushion tires, S/N A024D04070Z. (Location H)

FORKLIFTSHYSTER 18,000 LB. CAP., Mdl. H180E, Perkins diesel, 180" 2-stage mast, side shift, pneumatic tires, S/N B7P6374S. (Location D)CLARK 13,500 LB. CAP., Mdl C500135, LPG, 95" standard mast, 135" mast ht., 48" forks, cushion tires, S/N 915- 22-6040CB. (Location D)CLARK 13,500 LB. CAP., Mdl C500135, LPG, 83" standard mast, 111" mast ht., 48" forks, cushion tires, S/N 915- 6366CB. (Location D)KOMATSU 10,000 LB. CAP., Mdl. FG45ST-4, gas, 110" quad. mast, 310" lift ht., 42" forks, cushion tires, S/N 1308794. (Location D)HYSTER 10,000 LB. CAP., new 2006, Mdl. S100XM, LPG, 108" standard mast, 160" lift ht., 42" forks, cushion tires, side shift, 1,168 H.O.M., S/N F004V03941C. (Location D)CLARK 10,000 LB CAP., Mdl C500S100, LPG, 83" triple-stage mast, 167" lift ht., 42" forks, cushion tires, S/N 685-0005-9150. (Location D)(2) CATERPILLAR 8,000 LB. CAP., new 2009, Mdl. DP40K-D2, diesel engine, 89/187 3-mast side shift, S/N AT19C20390 (w/dual drive pneu. tires), S/N AT19C20393 (w/pneu. tires). (Location D)

(2) LINDE 8,000 LB. CAP., as new as 2009, Mdl. H35T, LPG, 83" standard mast, 123" lift ht., 42" forks, pneu. tires, S/N H2X393W05919 (2009), S/N H2X39306900 (2006). (Location J)

MISTUBISHI 8,000 LB. CAP, Mdl. FG40, LPG, 126.5" 2-stage mast, 199" max. lift ht., side shift, pneumatic style cushion tires, 60" forks, S/N AF29-00887. (Location E)TOYOTA 6,000 LB. CAP., new 2000, Mdl 7FGCU30, LP, 83" triple-stage mast, 171" lift ht., 42" forks, cushion tires, side shift, S/N 60134. (Location D)(2) CATERPILLAR 5,000 LB. CAP., new 2004, Mdl. GC25K, LPG, 83" 3-stage mast, 188" max. lift ht., cushion tires, 42" forks, S/N AT82D03567, S/N AT82D03573. (Location D)

(2) HYSTER 5,000 LB. CAP., new 2006, Mdl. H50FT, LPG, 83" triple-stage mast, 189" lift ht., 42" forks, pneu. tires, side shift, S/N L177B10163B, S/N L177B10808D. (Location J)YALE 5,000 LB. CAP., Mdl. GLC050, LPG engine, 84/194 triple-mast SS, cushion tire, 42" forks, S/N E187V23452B. (Location D)YALE 5,000 LB. CAP., Mdl. GLC050, LPG engine, 83/190 triple-mast SS, cushion tire, 42" forks, S/N A823N01689S. (Location D)YALE 4,000 LB. CAP., Mdl. GC040RGNUAE082GS, LPG, 82" triple-stage mast, 189" lift ht., 42" forks, cushion tires, S/N E187V06967V. (Location D)

TOW TRACTORUNITED MDL. SM340F, 5,000 lb. cap. drawbar pull, 1,536 H.O.M., S/N 17009. (Location D)

CARGO VAN2005 CHEVROLET ASTRO, four wheel drive, auto., A/C, bucket seats, odo reads: 118,340, VIN 1GCDL19X25B130310. (Location L)

MATERIAL HANDLING EQUIPMENT(2) SCISSOR LIFT TABLES W/ROLLER CONVEYOR SURFACES; SINGLE-SIDED AD-JUSTABLE CANTILEVER STORAGE RACK, (3) 8' ht. uprights, (12) 3' arms; (2 SEC-TIONS) 12' HT. X 8' W. X 3' DP. ADJUSTABLE; (5 SECTIONS) 24' HT. X 8' W. X 36" DP. X 4-TIER ADJ. PALLET RACK; PALLET RACK, wooden shelf inserts, 3-tier; (2 SEC-TIONS) 12' HT. X 8' W. X 42" DP. ADJUSTABLE PALLET RACK, wooden shelf inserts; 12' HT. X 12' W. X 42"' DP. ADJUSTABLE PALLET RACK. (All Location E)VAC-U-LIFT 4-PAD STYLE MDL. 3200-6-2-4-B10, 415 lb. pad cap., 1,660 unit cap., 115 v.; (2) YALE MDL. EE ELECTRIC WALK-BEHIND PALLET JACKS, S/N D540024, S/N D540025. (All Location L)

MISCELLANEOUS SHOP SUPPORT EQUIPMENT37.5 KVA ELECTRICAL TRANSFORMER; AIR/WATER PUMPS, NOZZLES AND CON-TROLS; ELECTRIC HEATERS AND CONTROLLERS. (All Location A)20' SHIPPING CONTAINER W/A/C AND LOCKING MAN DOOR; MILWAUKEE MAG-NETIC BASED DRILL; MILWAUKEE ABRASIVE CHOP SAW; TAPPER; PAINT POT; BANDING CART W/TOOLS; C-CLAMPS; PLATE DOGS; CLEVISES; LIFTING EYES; CHAIN HOISTS; PRY BARS; RIDGID 48" PIPE WRENCH; SLEDGE HAMMERS; 9' LONG FORKLIFT FORK EXTENSIONS; DAYTON 55,000 BTU PORTABLE OIL FIRED HEATER; ASSORTED ROUND AND PEDESTAL SHOP FANS UP TO 48" DIA.; DAYTON JOB BOX; ELECTRICAL SWITCHGEAR; FORKLIFT MANLIFT BASKET, 6' W. X 3.5' x 4'. (All Location E)TOLEDO MDL. 999 2" MAX. CAP. PIPE THREADER; GENERAL ELECTRIC 5 HP AIR COMPRESSOR, Mdl. 5KZ54D136, reciprocating; STEVECO MDL. 96TD0835 LIQUID LINE FILTER DRYER; 1-1/2" 316SS DIAPHRAGM PUMP; SANDING BELTS; EMORY CLOTHES; CHILLER PUMPS; (35) COLLAPSIBLE SHIPPING CRATES, plastic, 44.5" x 48"; METTLER TOLEDO SCALE; AUTOMATIC RIVETING MACHINE. (All Location L)

RIGGER LIFT 50,000 LB. CAP. RIGGING TYPE FORKLIFT

UNITED MDL. SM340F TOW TRACTOR

SAMPLE VIEW OF SHOP TOOLS

<LEWCO MDL. NS-LOAD STATION PALLETIZER

2006

2009

2010

2AVAILABLE

LINDE 8,000 LB. CAP. FORKLIFT

2011

QS-0021744

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

ITEMS AT (15) LOCATIONS IN TEXAS, CALIFORNIA

& LOUISIANAFeaturing: CNC & MANUAL Boring Mills, Hollow Spindle & Engine Lathes; Drills; Grinders; Gear

Machines; Drop Hammer; Stress Relief Oven, CNC & MANUAL Brakes, Burning Machines and Tube Benders; Shear; Ironworkers; Saws; Welding

Positioner & Manipulator; Seam Welder; Welders; Coating & Laminating Line; Material Handling,

Wrapping & Winding Equip.; Wax Filler; Industrial Sewing Machines; Air Handlers new in 2009; Dust

Collectors; Fire Pump; Compressors; Transformers; Phone System; Office F&F; Trade Show Booth; PLUS: (20) Forklifts up to 50,000 lb.

cap. new as 2011; Tugger; Van; More!!

Sale Conducted in

HOUSTON, TEXAS

AUCTION

PUBLIC INVITEDAUCTION: THURS., JUNE 19 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

LOCATION A Dixie Cullen Interests Storage Facility 8501 East Freeway (I-10) Houston, TX 77029LOCATION B Patterson-UTI Drilling Co., LLC #1 4607 West Industrial Avenue Midland, TX 79706LOCATION C Patterson-UTI Drilling Co., LLC #2 915 West Industrial Avenue Midland, TX 79706LOCATION D Forklift City Storage Facility 2120 North Loop 12 Irving (Dallas area), TX 75061LOCATION E RST Manufacturing 8516 Highway 6 South Houston, TX 77083LOCATION F Sunbelt Spas 8500 Highway 6 South Houston, TX 77083LOCATION G Universal Metalworking Equipment 5815 Armour Drive Houston, TX 77020

LOCATION H Stone Machinery Movers, Inc. 13991 Henry Harris Road Conroe, TX 77306LOCATION J Eagle Forklift 152 East End, Pomona, CA 91761LOCATION K Slidell Welding Services, Inc. 38123 Hwy. Dept. Road Slidell, LA 70452LOCATION L Advanced Steel Solutions 16003 Wood Drive Channelview, TX 77530LOCATION M Silva Technologies 215 N. Sampson, Houston, TX 77008LOCATION N Steven Levy Enterpirses, Inc. 1412 Pennsylvania South Houston, TX 77587LOCATION P Worldwide Machinery 16031 I-10 East, Houston, TX 77530LOCATION Q Naegli Transportation Inc. 7201 Easthaven Boulevard Houston, TX 77017

DIRECTIONS TO HOTEL BALLROOM AUCTION SITEFROM GEORGE BUSH INT’L AIRPORT: Take JFK Blvd./Airport Rd. South to Beltway 8. Turn right (west) on Beltway 8 and proceed onto I-45 North. The first exit traveling north on I-45 will be Exit 62 for Airtex Dr. Exit and turn left (west) onto Airtex Dr. The Holiday Inn Express & Suites auction site will be just ahead on your left. Watch for auction signs.

LODGING/AUCTION LOCATIONHOLIDAY INN EXPRESS & SUITES 125 Airtex Dr., Houston, TX 77090........(281)876-7378

PARTIAL TERMS & CONDITIONSA 15% Buyer’s Premium Will Apply On-site. A 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bidders for cash in accordance w/the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK W/BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until July 18, 2014.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together w/all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.Buyer agrees to accept assets purchased “AS IS,” “W/ALL FAULTS” and “W/REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consign-ment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

EQUIPMENT LOCATION INDEX