DUE TO PLANT CONSOLIDATION – SURPLUS AT 5 LOCATIONS: MARINE SEISMIC CABLE MANUFACTURING EQUIPMENT Featuring: Plastic Extrusion Line; Twiners; Braiders; Tapers; Capstans; Payoffs; Take-Ups; Vertical & Horizontal Injection Molders; Ultrasonic Welders; Glue Pumps; Material Mixers; Pressure Test Systems; Environmental Test Chamber; Air Compressors; Blast Cabinets; Dust Collector; Forklifts; Jib Cranes; Conveyor; Machine Tools; Shop Support Equip.; More! Surplus to the Ongoing Operations of SERCEL, INC. Theatre Style Auction to Be Conducted at Location #1: 10570 Bissonnet Drive HOUSTON, TEXAS 77002 (See Directions on Back Page) AUCTION: THURSDAY, MARCH 9 10:00 A.M. CST INSPECTIONS: LOCATIONS 1–4: Tues. & Wed., March 7 & 8, 9:00 A.M. to 4:00 P.M. LOCATION 5: By Appointment Only Read Partial Terms and Conditions on Back Page of Brochure AUCTION BUYER’S PREMIUM: 15% ON-SITE • 18% WEBCAST On-Site Bidding in Houston, Texas or Bid Via Webcast at FAX: (713) 672-7905 1304 Langham Creek Drive, Suite 454, Houston, Texas 77084 E-MAIL: [email protected] • WEBSITE: www.pmi-auction.com Ron Moore, Texas Lic. #7314 • HOUSTON • DALLAS • ST. LOUIS PHONE: (713) 691-4401 Sale Conducted By: In Conjunction With: 105 Revere Drive, Suite C Northbrook, IL 60062 Phone: 224-927-5320 Fax: 224-927-5311 www.pplauction.com PARTIAL VIEW OF DAVIS-STANDARD ENGINEERED EXTRUSION LINE DOMEKS COILING & WRAPPING LINE CNC AUTOJECTORS 280 T. VERT. PLASTIC INJECTION MOLDER SAMPLE VIEW OF REEL-O-MATIC PAYOFF AND TAKE-UP MACHINES PARTIAL VIEW OF OMA BRAIDING LINE 2010 2007 2013
12
Embed
AUCTION - Plant & Machinery Inc. - Auctioneer in …pmi.vihn.net/auction/Files/3_1000001237_pmi_3.9.pdfEAGLE FOAM MIXER HOPPER, w/Conair Dustbeater, bottom gravity dropout. NATIONAL
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DUE TO PLANT CONSOLIDATION – SURPLUS AT 5 LOCATIONS: MARINE SEISMIC CABLE MANUFACTURING EQUIPMENT
Featuring: Plastic Extrusion Line; Twiners; Braiders; Tapers; Capstans; Payoffs; Take-Ups; Vertical & Horizontal Injection Molders; Ultrasonic Welders; Glue Pumps; Material Mixers; Pressure Test Systems; Environmental Test Chamber; Air Compressors; Blast Cabinets;
MEASURING SYSTEM, new 2010, S/N 24-10-7819, S/N 24-10-7815, S/N 24-10-7816 (contains 3 units in overall line, hooked up to D-S control station)
• CONAIR MDL. W400 DRYER AND HOPPER, S/N 221211
• AMERICAN KUHNE ULTRA SERIES 3.5" MDL. AK350 EXTRUDER, new 2005, 24:1 l/D, (4) zones electrically heated, air cooled, S/N 5093, equipped w/Marathon Electric Mdl. CVL444THFN8036DDF21 125 HP AC motor, S/N 11010286-01, rated 2,700 max. RPM (currently set-up 60 Hz, 125 HP motor, 1,788 RPM, 460 v., 144 amp), Koellman gear box rated 130 HP, size UNEX 5.1, S/N 2259705-1, ratio 17.2:1, 1,750 RPM input, 1,022 RPM output (incl. a free standing control unit for this extruder that is in storage since D-S control system integrates extruder w/the line), spare screw for extruder
• DAVIS-STANDARD MASTER CONTROL UNIT, Job No. FM-009115 (integrates control over all line functions)
• WATER COOLING SYSTEM, consisting of AEC chiller, stainless steel trough w/(11) 10' sections, plastic water tank, various pumps and fittings
CONCENTRIC TAPERSU.S. MACHINERY MDL. LST1500 SINGLE, 90" x 68" x 65" @ 2,500-lbs., rebuilt 2014 by Wire Plastic Machinery Corp. and never returned to service, S/N N.A.
U.S. MACHINERY MDL. LST1500 SINGLE, 90" x 68" x 65" @ 2,500-lbs., S/N 640426.
LAYOUT LINELINE #2 CONSISTING OF: KALMARK PAYOFF; STERLING DAVIS ELECTRIC DANCER, S/N C4789; REEL-O-MATIC MDL. LT-200 HIGH ACCURACY MEASURER, 1/64" to 2" dia. material cap., new 2003, S/N 21-1052-F03.
DRYERS & HOPPERSCONAIR MDL. MDC30-SC-D CAROUSEL DRYER w/hopper, S/N 139609; NOVATEC MDL. VL-4 DRYER AND HOPPER; NOVATEC 200-LB. CAP. DRYER AND HOPPER, new 2006, S/N 10A3402-966419583; NOVATEC DRYER AND HOPPER.
LAYOUT LINE W/COMPONENTS AS NEW AS 2003 DOW CORNING
SILICONE PUMPCONAIR CAROUSEL DRYER
BRANSON 910IW ULTRASONIC WELDER
BRANSON 921AES ULTRASONIC WELDER
NATIONAL BULK EQUIPMENT MIXING HOPPER
BESCO CABLE ENCAPSULATION MACHINE
U.S. MACHINERY CONCENTRIC TAPER
SETIC TYPE TRC500N CONCENTRIC TAPER
LOCATION 1: CONTINUED
AS NEW AS2003
REBUILT20142006
4
LARGE QUANTITY GRAVITY FEED ROLLER CONVEYOR
QUINCY 30 HP AIR COMPRESSOR
AIRTEK REFRIGERATED AIR DRYER
NISSAN 5,250-LB. CAP. LPG FORKLIFT
>BLUE GIANT
3,300-LB. CAP. ELECTRIC
WALK-BEHIND FORKLIFT
HYSTER 3,000-LB. CAP. LPG FORKLIFT
AIR COMPRESSORS & SUPPORT EQUIPMENT
QUINCY MDL. QGD-30 AIR COMPRESSOR; SULLIVAN PALATEK AIR COMPRESSOR; SULLIVAN PALATEK REFRIGERATED AIR DRYER; AIRTEK MDL. ECP250 REFRIGERATED AIR DRYER, S/N 11G-D011398; AIR RECEIVER.
MISCELLANEOUS PLANT SUPPORT EQUIPMENT
HARDNESS TESTER, analog type; 36" MANUAL CRANK PAYOFF REEL; ELITE SERIES 5,500 WATT PORTABLE GASOLINE GENERATORS; (2) STORM RESPONDER 5,500 WATT PORTABLE GASOLINE GENERATORS; BALDOR GRINDER BUFFER; MILLER THUNDERBOLT WELDER; POWER MAX DRILL PRESS; LARGE QUANTITY GRAVITY FEED ROLLER CON-VEYOR; MORE.
CNC COILING CUT-OFF & WRAPPING LINEDOMEKS MDL. DM1600, new 2013, take-up/payoff reel designed for cables on drum dia. 560 mm to 1,600 mm, 300 mm to 1,100 mm reel width, 2,500 kgs. max. reel weight, 50 to 600 meters/minute winding spndl. (can be used for either motorized payoff or brake controlled payoff); DOMEKS MDL. COILMATIK 500 HIGH SPD. CABLE COIL WRAPPER, pneu. controlled horiz. accumulator, Precision tension control, approx. 50 meters accumulating cap., used for flexible insulated single wire and Ridgid or multi-wire cable w/cross sections from approx. 1.5 mm to 6 mm, Siemens Simatic multi-panel digital touch control panel.
LOCATION 2:“FALLSTONE BUILDING A”
SERCEL, INC.10502 FALLSTONE ROAD, HOUSTON, TEXAS 77099(Enter at Guard Shack on Brooklet Drive, Bldg. A is on the left)
INSPECTION: Tuesday & Wednesday, March 7 & 8, 9:00 A.M. to 4:00 P.M. & Morning of Sale, 8:00 A.M. to 10:00 A.M.
2004
AUCTION: THURSDAY, MARCH 9 10:00 A.M. CST
6
NEWBURY 30 T. CAP. VERTICAL PLASTIC INJECTION MOLDER
NEWBURY 30 T. CAP. PLASTIC INJECTION MOLDER SHOWN W/CONAIR THERMOLATOR
<CINCINNATI MILACRON VECTOR 150 T. CAP. VERTICAL INJECTION MOLDER
<(1 OF 2) CONAIR PORTABLE DRYERS
>AUTOJECTORS
40 T. CAP. MDL. HCS-40
INJECTION MOLDER
AUTOJECTORS 40 T. CAP. PLASTIC INJECTION MOLDER W/CONAIR MOLD TEMP. CONTROLLER AND DRYER
LOCATION 2: CONTINUED
VERTICAL PLASTIC INJECTION
MOLDING MACHINESCINCINNATI MILACRON 150 T. CAP., new 1997, Vector Mdl. CH150-S CNC control, Camac VCX controller, S/N 3958Z01/97-2, Conair Mdl. TW Thermolator, S/N 205854, Novatec Mdl. MD-15 dryer, S/N 10483A-1924 w/Mdl. MD hopper, new 1995, 60-lb. cap., S/N 10483A2111.AUTOJECTORS 40 T. CAP. MDL. HCS-40, new 2001, 5 oz. shot size, Matrix CNC control, S/N AJ002905-0301, Conair Thermolator Mdl. TW mold temp. controller, S/N 235360, Novatec Mdl. MD-15 dryer, S/N 40P7498-2058.AUTOJECTORS 40 T. CAP. MDL. HCS-40, 15 oz. shot size, Matrix CNC control, S/N AJ002906-030, Conair mold temp. controller, Conair small carousel dryer.NEWBURY 30 T. CAP. Mdl. V3-30RS, 3 oz. shot size, S/N 1-5867-30S-80, Conair Thermolator Mdl. TW mold temp. controller, S/N 130819, Novatech dryer, Novatech Mdl. MDM hopper, 30-lb. cap., S/N 3-7179-0397.NEWBURY 30 T. CAP. MDL. V3-30RS, 3 oz. shot size, S/N 11-6351-30S-81, Conair mold temp. controller, Novatech dryer.POLYJECTOR, manual control, used for proto-type and test work.
POLYJECTOR VERTICAL PLASTIC INJECTION MOLDER
1997
2001
PROXY BIDSIf you cannot attend this sale or bid online, we will bid on your behalf.
Contact Houston office at (713) 691-4401 for instructions,
or go to our website at www.pmi-auction.com.
On-Site Bidding in Houston, Texas
or Bid Via Webcast at
7
TRUE 3-DOOR REFRIGERATED DISPLAY CASE
VAN DORN 200 T. CAP. HORIZONTAL PLASTIC INJECTION MOLDER DONALDSON TORIT DUST COLLECTOR COMOCO MICRO-ABRASIVE BLASTER
HYDROVANE MDL. HV22ACE08-460D 30 HP ROTARY SCREW AIR COMPRESSOR, 460 v. @ 41.8 FLA, 3 phase 60 Hz, S/N B138A 8 1 3-0 A000217; SULLIVAN PALATEK 40 HP MDL. 40DG ROTARY SCREW AIR COMPRESSOR; SULLAIR 40 HP MDL. LS-10 ROTARY SCREW AIR COMPRESSOR; STYLAIR DES-ICCANT TYPE AIR DRIER; AIR RECEIVER.
REBUILT
2000
10
VECTRAX 14" X 40" ENGINE LATHE
TOOLS INC. VERTICAL TURRET MILL
MSC VERTICAL BANDSAW
LOCATION 4: “PARK ROW”
SERCEL, INC.17200 PARK ROW DRIVE HOUSTON, TEXAS 77084
(Enter at Gate 4. Watch for signs.)INSPECTION: Tuesday & Wednesday, March 7 & 8, 9:00 A.M. to 4:00 P.M.
HYDRAULIC SHAFTLESS PAYOFF & TAKE-UP REELS
(2) HYDRAULIC COMPONENT SERVICE, adjust-able 39" to 55", one w/integral hyd. power unit.
SHOP TOOLSVECTRAX 14" X 40" ENGINE LATHE, new 2007, Mdl. 82837915, 70 to 1,500 RPM, geared head, english/metric threading, D1-4 spndl. nose, tool post, 3-jaw chuck, 2 HP main motor, 220 v, 1 phase, S/N 062194; TOOLS, INC. (TAI CHIN) VERTICAL TURRET MILL-ING MACHINE, pwr. long. table feed, 190 to 3,180 RPM, S/N N.A.; MSC VERTICAL BANDSAW, blade welder/grinder, S/N N.A.DAYTON 7" X 12" HORIZ. BANDSAW, Mdl. 4YG30A, S/N 62194; DELTA FLOOR-TYPE DRILL PRESS, S/N 114-3032; WESTWARD MDL. 4TM71 8" DOUBLE-END PEDESTAL GRINDER.
RING & MOLD LINES W/CNC VERTICAL
PLASTIC INJECTION MOLDERSAUTOJECTORS 280 T. CAP. MDL. HCR, new 2001, Matrix Mdl. HCR-280 CNC controller, 480 v. /3 phase, 40 HP motor, S/N AJ002891-0701; NOVATEC MDL. NBD-50 DRYER; NOVATEC MDL. 200# DRYER, mtd. on carbon steel stand; CONAIR MDL. TW THER-MOLATOR MOLD TEMP. CONTROLLER; H.C.S. 39" TO 55" HYD. SHAFTLESS PAYOFF REEL w/Womack hyd. pwr. pack; H.C.S. 39" to 55" hyd. shaftless take-up reel (molds and clamps not included).
DEMAG/NEWBURY MDL. 30-5, new 2006, Pathfinder 5000 CNC controls, reported 5.5 oz. shot size, S/N 5504-210; HCS 5' DIA. CAPSTAN; H.C.S. 39" TO 55" HYD. SHAFTLESS PAYOFF; REEL-O-MATIC MDL. FMPT10, 24" to 96" dia. x 12" to 60"W. x 10,000-lbs. take-up reel, S/N 2-4380-L07; HYDRAULIC POWER UNIT (molds not included).DEMAG/NEWBURY MDL. 30-5, new 2004, Pathfinder 5000 CNC controls, reported 5.5 oz. shot size, S/N 5504-220; 5' DIA. CAPSTAN; H.C.S. 39" TO 55" HYD. SHAFTLESS PAYOFF AND TAKE-UP REELS; SPRE-CHER/SCHUH HYD. UNIT (molds not included).
2007
2001
2006
AUCTION: THURSDAY, MARCH 9 • 10:00 A.M. CST
On-Site Bidding in Houston, Texas or Bid Via Webcast at
(2) HYDRAULIC SHAFTLESS PAYOFF AND TAKE-UP REELS
DIRECTIONSFROM THE GEORGE BUSH INTERCONTINENTAL AIRPORT TO LOCATION #1/TECHWAY SOUTHWEST BUSINESS PARK–SERCEL, INC.: Follow the signs out of the airport south to Beltway 8/Sam Houston Toll Road. Turn right (west) onto Beltway 8 and enter the freeway. Stay west on Beltway 8 and it will be-come the Sam Houston Toll Road. Proceed counterclockwise around Houston on the toll road and when you reach the west side of Houston you will come to the exit for Bissonnet Street. Turn right (west) onto Bissonnet Street and pro-ceed to the auction site ahead on your right. Watch for auction signs.FROM TECHWAY TO LOCATION #2 AND #3: Exit onto Bissonnet and turn right (west). Proceed to the traffic light at Wilcrest. Turn left (south) on Wilcrest and proceed to Kinghurst. Turn left (east) and proceed to Brooklet Drive. Turn right and the next right turn will be for the parking lot and guard shack behind Fallstone Buildings A and B. (Locations 2 and 3). Park and sign in at guard shack and you will be escorted to the items for viewing.FROM TECHWAY TO LOCATION #4: Turn left onto Bissonnet and proceed to the Sam Houston Toll Road. Turn left onto the toll road frontage road and then enter the toll road heading south towards I-10. Take I-10 west towards San Antonio and proceed to the exit for Park Ten Blvd. Turn right onto Park Ten Blvd. and proceed to Park Row. Turn left (west) onto Park Row and proceed to the Sercel Building via Gate 4 ahead on your right. Watch for auction signs.
FROM TECHWAY TO LOCATION #5: ALL INSPECTIONS HERE ARE BY APPOINTMENT ONLY. CONTACT JOEL DISALVO FOR APPOINTMENT AT (281) 209-8170. Turn left onto Bissonnet and proceed to the Sam Houston Toll Road. Turn left onto the toll road frontage road and then enter the toll road heading north towards George Bush Airport. As you wind around Houston clockwise you will come to the exit for the Hardy Toll Road North/Airport. Take the Hardy Toll Road North and proceed to the exit for East Richey Road. Turn right onto E. Richey Road and proceed to the Aires building ahead on your left at 1501 E. Richey Road.
AREA LODGINGHampton Inn & Suites ............................................................... (281) 530-7776 6440 W. Sam Houston Pkwy. S
Hilton Garden Inn Westbelt ...................................................... (713) 270-6100 6855 W. Sam Houston Pkwy. S
RECOMMENDED RIGGERABLE MACHINERY MOVERS HAS BEEN ON-SITE WORKING FOR SERCEL IN THEIR PLANT RELOCATION PROJECT. WE SUGGEST THAT YOU CALL THEM TO
OBTAIN A QUOTE TO REMOVE YOUR PURCHASES.ABLE MACHINERY MOVERS DARREN BOLES: Estimator • MOBILE: (713) 539-0644 • [email protected]
REMOVAL DEADLINEAll items must be removed from ALL locations by 5:00 P.M. Friday, March 31, 2017 or they will be considered abandoned and ownership will revert back to the Seller.
A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until April 10, 2017.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS
ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harm-less from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be atten-tive to those announcements and to the catalog language.
PARTIAL TERMS & CONDITIONS
LOCATION 5: “ARIES”ARIES WORLDWIDE LOGISTICS
1501 EAST RICHEY ROAD, HOUSTON, TEXAS 77073INSPECTION: By appointment only. Contact Joel DiSalvo for an
appointment to inspect at (281) 209-8170
PRESSURE VESSEL TEST TANKPRESSVESS ASSOC. INDUSTRIES LTD. 300 PSI SHELL AND DISHED END DESIGN, new 2002, carbon steel, design pressure 330 PSIG, 0 to 50 deg. C, test pressure; 440 PSIG, max. working pressure: 300 PSIG, design code: BS5500 1997 construction Cat 2, radiography: 10%. overall dims. temp. gauge reads 0–140 deg. F/0-60 deg. C, corrosion al-lowances: 1 mm internal, 0 mm external, approx. dimen-sions: 14'W. x 14.5'L. x 14'H. w/attachments, vessel only: approx. 9'H. x 9' dia., weight: 31,306-lb., S/N W1422.
AUCTION: THURSDAY, MARCH 910:00 A.M. CST
12QS-0036264
PROXY BIDSIf you cannot attend this sale or bid online, we will bid on your behalf.
Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.
UNABLE TO ATTEND?Bid on-line in real time at
TO PARTICIPATE YOU MUST:
1. Register at www.BidSpotter.com. Use the link to BidSpotter on PMI’s website calendar. DO IT NOW.
2. Either send wire transfer, or, overnight delivery service a cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, Texas 77084 Wire transfer instructions can be found at pmi-auction.com
You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.
If you need assistance, don’t hesitate to call (713) 691-4401.
ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.