Timesaver 852.4CB 3-Head Wide Belt Cross Belt Sander W/Sensing CMS NC-TRIAX-PF-1.R8RR Single Table CNC Router Pneumafil 11.5-316-8 Dust Collector CMS PF102R4CURR Twin Table CNC Router W/ATC Wemhoner KT-M34/15V-300 Shuttle Style Membrane Hot Press & Boiler Ingersoll Rand SSR-EP100 100HP Air Compressor DuBois 54” Reverse Roll Coater Torwegge Veneer Jointer Technolegno TG2800 Dbl. Sided Profile Shaper/Sander Heesemann KSA4 3-Head Wide Belt Sander W/Cross Sanding Technolegno TG280/2 Dbl. End Tenoner Schelling FW330330 CNC Panel Saw Diehl SL-52 Wide Arm Straight Line Rip Saw Technolegno Dbl. Sided Profile Shaper/Sander Sandingmaster SCSB2-1300 2- Head Wide Belt Sander Mereen Johnson 640 Dbl. End Tenoner AEM 52” 2-Head Wide Belt Sander W/Cross Sanding AUCTION! AUCTION! ® PH: 717-854-0316 FX: 717-843-7826 INDUSTRIAL RECOVERY SERVICES, INC. P.O. Box 5086 • York, PA17405 United Plywood Industries Inc. United Plywood Industries, Inc. closes its Mocksville, NC plant! September 12 th Featured Items! Large Quantity of Maintenance Room Supplies! Portable & Hand Tools! Particle Board, MDF & Veneer! Diamond & Carbide Tooling, Shaper Cutters, Profile Cutters! Office Equipment! And More! 1996! 1995! 1990! 1996! Online Only! www.irsAuctions.com Air Compressors & Dryers • Bandsaws • Boilers • CNC Routers • Combination Machines • Conveyors • Drill Presses • Dust Collection • Edge Sanders • Edgebanders • Finishing Equipment • Forklifts • Glue Spreaders • Grinders • Jointers • Lumber • Maintenance Equipment • Material Handling • Misc. Sanders • Miscellaneous Equipment • Office Equipment • Packaging Equipment • Pallet Jacks • Pallet Racking • Panel Cleaners • Panel Saws • Planers Link • Portable & Hand Tools • Presses • Roll Coaters • Shapers • Straight Line Rip Saws • Tenoners • Tooling • Upcut & Hydracut Saws • Veneer Machinery • Welding Equipment • Wide Belt Sanders 217 Lots! • Wemhoner KT-M34/15V-300 Shuttle Style Membrane Hot Press (1995) & Boiler; 60” x 11’ heated platen, (5) 6” diameter hydraulic cylinders, (2) 60” x 15’ belt conveyors, 64” x 139” shuttle table. Heatel HCS 50G nature gas boiler, MAWP 150 psig # 600°F • CMS PF102R4CURR Twin Table CNC Router W/ATC (1996); (4) routing spindles, (2) with automatic tool change, (1) with C-axis, (2) with nut & collet, 61” x 121” X/Y travel (full 5 x 10 capability) • CMS NC-TRIAX-PF-1.R8RR Single Table CNC Router (1988); 49- 1/2” x 99-1/2” table, 2-zone capability, (8) turret routing heads – (1) tur- ret 7-position 32mm boring head • CMS NC.TRIAX.P.F.4T CNC Router (1986); 49-1/2” x 99-1/2” single table, 2-zone capability, (4) routing heads – 5.5hp, 12000-18000 rpm • Schelling FW330330 CNC Panel Saw (1988); 10’ capacity, (3) air flotation tables 22-1/2” x 80” each • Diehl SL-52 Straight Line Rip Saw; Approx. 15-20hp, 89” x 78” table, Wide arm, 48” throat • Dri-Quik Infrared Oven; Approx. 5hp, 40” x 56” infeed conveyor, 36” x 32’ full length belt conveyor • Technolegno TG280/2 Dbl. End Tenoner (1990); 60” width cap., 6” load space • Technolegno TG2800 Dbl. Sided Profile Shaper/Sander (1996); 60” width cap., 50” load space • Timesaver 852.4CB 3-Head Wide Belt Cross Belt Sander W/Sensing; 52” wide vacuum bed, 32” load space, Sensing – spaced 1-1/2”, 6” wide x 215” cross belt, 2nd head – contact, platen w/sens- ing, 25hp, 3rd head – contact, platen w/sensing, 20hp, 4th head – con- tact, platen w/sensing, 20hp • AEM 52” 2-Head Wide Belt Sander W/Cross Sanding: 52” cap. Vacuum bed, Cross belt 6” wide, 20/10hp, 460v motor, 24” load space, 2nd head: combination, 20/10hp, 460v motor, 3rd head – platen, 15/7.5hp, 460v motor • Ingersoll Rand SSR-EP100 100HP Air Compressor; 446 cfm cap. • Ingersoll Rand SSR-EP50SE 50HP Air Compressor; 194 cfm cap. • Ingersoll Rand TM400TE4 Thermal Mass Compressed Air Dryer (1994); Max. inlet air pressure 250 psig • Torit TD-2300-255 Dust Collector; 5HP, (12) 12” x 24” bags • Sandingmaster SCSB2-1300 2-Head Wide Belt Sander; 50” capacity • Heesemann KSA4 2-Head Wide Belt Sander W/Cross Sanding (1986); Width: 65-1/2” Loading space: approx. 24” Cap. 63” x 3”, Sensing for veneer sanding, (1) Cross belt stroke & (2) platen heads • Pneumafil 11.5-316-8 Dust Collector; (1) Carolina blower, 75hp, 230/460v, 3ph, 29” inlet