8/18/2019 AU CE Solution Quiz 1
1/13
1 of 13
Air University
Department of Mechatronics Engineering
Semester: Spring – 2016
MT –
353 Control EngineeringDate: 25th February, 2016
Quiz No. 1Total Marks: 80
Time: 60 min
Name: ________________________________ Reg. / Roll No: ____________
Question No. 1 (20)
Find the Transfer Function, () ()() for the Electrical Network shown in figure 1
below;
Figure 1
Question No. 2 (20)
For the following Transfer Function F(s), find the inverse Laplace Transform and also write
MATLAB® Code.
()
( )
___________________________________________________________________________
For Examiner Use Only:
Marks Obtained: ____________________________ Signature: _____________________
8/18/2019 AU CE Solution Quiz 1
2/13
2 of 13
Question No. 3 (20)
Write the Equations of Motion (s – Domain) for the Translational Mechanical System shown
in figure 2 below;
Figure 2
Question No. 4 (20)
Answer the following questions briefly:
a) Define Transfer Function.
b) What are Closed Loop Systems? Explain with example and draw block diagram.
c)
What assumption is made concerning initial conditions when dealing with transferfunctions?
d) State Analysis and Design Objectives of a Control System
8/18/2019 AU CE Solution Quiz 1
3/13
3 of 13
8/18/2019 AU CE Solution Quiz 1
4/13
4 of 13
8/18/2019 AU CE Solution Quiz 1
5/13
5 of 13
8/18/2019 AU CE Solution Quiz 1
6/13
6 of 13
8/18/2019 AU CE Solution Quiz 1
7/13
7 of 13
8/18/2019 AU CE Solution Quiz 1
8/13
8 of 13
8/18/2019 AU CE Solution Quiz 1
9/13
9 of 13
8/18/2019 AU CE Solution Quiz 1
10/13
10 of 13
8/18/2019 AU CE Solution Quiz 1
11/13
11 of 13
8/18/2019 AU CE Solution Quiz 1
12/13
12 of 13
8/18/2019 AU CE Solution Quiz 1
13/13
13 of 13