AU 2009 Classes - by Track Architecture & Building Design Power Track 8:00 am - 9:30 am Intermediate Let's Stick Together: IPD Collaboration Between Disciplines Veronica Lamb Tue. 12/1 90-Minute Lab 8:00 am - 9:30 am All Levels Green Your Design with Autodesk® Ecotect® and Revit® Patrick Villella Tue. 12/1 90-Minute Class 8:00 am - 9:30 am Intermediate Collaborating Across Disciplines with Autodesk® Revit® Architecture, MEP, and Structure David Cohn Tue. 12/1 90-Minute Class 8:00 am - 9:30 am Advanced The Complete Guide to Configuring AutoCAD® Architecture 2010 for Your Office T.J. Meehan, AIA LEED AP Tue. 12/1 90-Minute Class 8:00 am - 9:30 am All Levels Autodesk® Revit® Architecture for AutoCAD® Architecture Geeks Matt Dillon Tue. 12/1 Power Track 1:00 pm - 2:30 pm Intermediate Conceptual Design in Autodesk® Revit® Architecture 2010 David Fano Tue. 12/1 90-Minute Lab 1:00 pm - 2:30 pm Intermediate A Quick Spin on Project Navigator in AutoCAD® Architecture Reid Addis Tue. 12/1 Un-Conference 1:00 pm - 2:30 pm Advanced Real-World AutoCAD® Architecture Schedule Use: How to Create Custom Schedules That Work for You and Your Company lauren stassi Tue. 12/1 90-Minute Class 1:00 pm - 2:30 pm Intermediate Insanely Great Stairs and Railings with Autodesk® Revit® Phil Read Tue. 12/1 90-Minute Class 1:00 pm - 2:30 pm Advanced LEED®-ing Your Project Into the Green Revolution: Achieving EQc 8.1 with Autodesk® Revit® Architecture 2010 and Energy Analys Nick Bower Tue. 12/1 Multi Part Session 3:00 pm - 4:30 pm All levels Schedule Anything in AutoCAD® Architecture or AutoCAD® MEP, Part 1 Matt Dillon Tue. 12/1 Power Track 3:00 pm - 4:30 pm Intermediate Not Your Dad's CAD: Phasing and Design Options in Autodesk® Revit® Beau Turner Tue. 12/1 Un-Conference 3:00 pm - 4:30 pm Intermediate How Do I Manage the CA Phase in Autodesk® Revit®? James Stoneberger Tue. 12/1 90-Minute Class 3:00 pm - 4:30 pm Power User AutoCAD® Architecture Secrets Exposed! Jeanne Aarhus Tue. 12/1 90-Minute Class 3:00 pm - 4:30 pm Intermediate Finding Your Way Around Shared Coordinates Ron Palma Tue. 12/1 Multi Part Session 5:00 pm - 6:30 pm Intermediate Schedule Anything in AutoCAD® Architecture or AutoCAD® MEP, Part 2 Matt Dillon Tue. 12/1 90-Minute Class 5:00 pm - 6:30 pm Advanced Using Autodesk® Revit® and 3ds Max® Design for Daylighting Eddy Krygiel Tue. 12/1 90-Minute Class 5:00 pm - 6:30 pm Intermediate Taking AutoCAD® Architecture to the Next Level David Butts Tue. 12/1 90-Minute Class 5:00 pm - 6:30 pm Intermediate "This is SO Not in the Book" About Revit® Architecture Donnia Tabor-Hanson Tue. 12/1 90-Minute Class 8:00 am - 9:30 am Intermediate Multi-Discipline Project Coordination with Autodesk® Revit® James Stoneberger Wed. 12/2 90-Minute Class 8:00 am - 9:30 am Intermediate All in the Family: Creating Parametric Parts in Autodesk® Revit® Architecture Matt Dillon Wed. 12/2 90-Minute Class 8:00 am - 9:30 am All Levels Mobilizing to Design for Carbon Neutrality: A Practical Approach Ken Hall Wed. 12/2 90-Minute Class 8:00 am - 9:30 am Power User Better Decisions, Better Buildings, Early Energy Analysis David Haynes Wed. 12/2 90-Minute Class 8:00 am - 9:30 am Advanced Advanced Curtain Wall Design in AutoCAD® Architecture James Upton Wed. 12/2 90-Minute Class 1:00 pm - 2:30 pm Power User Building Solutions: The AutoCAD® Architecture Power User Challenge Jeanne Aarhus Wed. 12/2 Page 1 of 34 Report Generated: 7/24/2009 4:39:54 PM
34
Embed
AU 2009 Classes - by Trackau.typepad.com/files/au2009classes_draft1.pdf · Autodesk® Revit® Architecture for AutoCAD® Architecture Geeks ... Custom Stairs and Railings in Autodesk®
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AU 2009 Classes - by TrackArchitecture & Building Design
Power Track8:00 am - 9:30 am IntermediateLet's Stick Together: IPD Collaboration Between DisciplinesVeronica Lamb Tue. 12/1
90-Minute Lab8:00 am - 9:30 am All LevelsGreen Your Design with Autodesk® Ecotect® and Revit®Patrick Villella Tue. 12/1
90-Minute Class8:00 am - 9:30 am IntermediateCollaborating Across Disciplines with Autodesk® Revit® Architecture, MEP, and StructureDavid Cohn Tue. 12/1
90-Minute Class8:00 am - 9:30 am AdvancedThe Complete Guide to Configuring AutoCAD® Architecture 2010 for Your OfficeT.J. Meehan, AIA LEED AP Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsAutodesk® Revit® Architecture for AutoCAD® Architecture GeeksMatt Dillon Tue. 12/1
Power Track1:00 pm - 2:30 pm IntermediateConceptual Design in Autodesk® Revit® Architecture 2010David Fano Tue. 12/1
90-Minute Lab1:00 pm - 2:30 pm IntermediateA Quick Spin on Project Navigator in AutoCAD® ArchitectureReid Addis Tue. 12/1
Un-Conference1:00 pm - 2:30 pm Advanced
Real-World AutoCAD® Architecture Schedule Use: How to Create Custom Schedules That Work for You and Your Companylauren stassi Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm IntermediateInsanely Great Stairs and Railings with Autodesk® Revit®Phil Read Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm Advanced
LEED®-ing Your Project Into the Green Revolution: Achieving EQc 8.1 with Autodesk® Revit® Architecture 2010 and Energy AnalysNick Bower Tue. 12/1
Multi Part Session3:00 pm - 4:30 pm All levelsSchedule Anything in AutoCAD® Architecture or AutoCAD® MEP, Part 1Matt Dillon Tue. 12/1
Power Track3:00 pm - 4:30 pm IntermediateNot Your Dad's CAD: Phasing and Design Options in Autodesk® Revit®Beau Turner Tue. 12/1
Un-Conference3:00 pm - 4:30 pm IntermediateHow Do I Manage the CA Phase in Autodesk® Revit®?James Stoneberger Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateFinding Your Way Around Shared CoordinatesRon Palma Tue. 12/1
Multi Part Session5:00 pm - 6:30 pm IntermediateSchedule Anything in AutoCAD® Architecture or AutoCAD® MEP, Part 2Matt Dillon Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm AdvancedUsing Autodesk® Revit® and 3ds Max® Design for DaylightingEddy Krygiel Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm IntermediateTaking AutoCAD® Architecture to the Next LevelDavid Butts Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm Intermediate"This is SO Not in the Book" About Revit® ArchitectureDonnia Tabor-Hanson Tue. 12/1
90-Minute Class8:00 am - 9:30 am IntermediateMulti-Discipline Project Coordination with Autodesk® Revit®James Stoneberger Wed. 12/2
90-Minute Class8:00 am - 9:30 am IntermediateAll in the Family: Creating Parametric Parts in Autodesk® Revit® ArchitectureMatt Dillon Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsMobilizing to Design for Carbon Neutrality: A Practical ApproachKen Hall Wed. 12/2
90-Minute Class8:00 am - 9:30 am Power UserBetter Decisions, Better Buildings, Early Energy AnalysisDavid Haynes Wed. 12/2
90-Minute Class8:00 am - 9:30 am AdvancedAdvanced Curtain Wall Design in AutoCAD® ArchitectureJames Upton Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm Power UserBuilding Solutions: The AutoCAD® Architecture Power User ChallengeJeanne Aarhus Wed. 12/2
Page 1 of 34Report Generated: 7/24/2009 4:39:54 PM
AU 2009 Classes - by Track
90-Minute Lab1:00 pm - 2:30 pm All Levels
Model to Marvelous Goes Mental: Realistic Approaches to Photo-Realistic Design Visualization with Autodesk® Revit® 2010Jeffrey McGrew Wed. 12/2
Un-Conference1:00 pm - 2:30 pm Power UserWhat Makes a Good Autodesk® Revit® Project TemplateRobert Manna Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All LevelsDetailing in Autodesk® Revit® ArchitecturePaul Aubin Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm IntermediateA Lap Around Autodesk® Quantity TakeoffMark Webb Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsCustom Stairs and Railings in Autodesk® Revit® Architecture 2010eric wing Wed. 12/2
90-Minute Lab3:00 pm - 4:30 pm All LevelsA Quick Spin on Autodesk® Revit® Architecture Curtain WallsReid Addis Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm Advanced
AutoCAD® Architecture Horizontal Sections: The Hidden Tool to Document the Curves, Slopes, Tapers, and Overlaps That You Modelauren stassi Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsAutodesk® Revit® for Conceptual Floor PlansJim Balding Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsAutodesk® Revit®: A BIM Manager's Guide to Revit-alizing your OfficeNauman Mysorewala Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm AdvancedAdvanced Documentation Techniques for the Autodesk® Revit® PlatformT.J. Meehan, AIA LEED AP Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm Power UserThe Definitive Guide to Installing AutoCAD® Architecture 2010Matthew Stachoni Wed. 12/2
Power Track5:00 pm - 6:30 pm IntermediateIntegrated Architecture and Interior Design Documentation with Autodesk RevitScott Brown Wed. 12/2
Un-Conference5:00 pm - 6:30 pm AdvancedAutodesk® Revit® Project Templates: Finding the Right Balance for What's in ThemT.J. Meehan, AIA LEED AP Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm All LevelsDoug s Quik Tips for AutoCAD® ArchitectureDouglas Bowers, AIA LEED AP Wed. 12/2
90-Minute Panel5:00 pm - 6:30 pm All LevelsBIM Convergence: BIM Collaboration on a Case Study ProjectKelly Cone Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsCory Dippold Thu. 12/3
Power Track8:00 am - 9:30 am IntermediateGreen Renovations with Autodesk® Revit® ArchitectureMarie Fisher Thu. 12/3
90-Minute Panel8:00 am - 9:30 am All LevelsChaos: Multidiscipline, Multi-Firm, Multi-Location Autodesk® Revit® ProjectsEric Mitchell Thu. 12/3
90-Minute Class8:00 am - 9:30 am IntermediateBreaking Free of the Plan: AutoCAD® Architecture Sections and ElevationsPaul Aubin Thu. 12/3
90-Minute Class8:00 am - 9:30 am All LevelsFrom Exising and Beyond with Design Options and PhasesMike Massey Thu. 12/3
90-Minute Class8:00 am - 9:30 am IntermediateThe Rise of the Phoenix: The Design and Construction of NBC Universal Studios Backlot With Autodesk® Revit®Phil Read Thu. 12/3
90-Minute Class10:00 am - 11:30 am IntermediateEasing the Transition from AutoCAD® to AutoCAD ArchitectureTom Tobin Thu. 12/3
90-Minute Panel10:00 am - 11:30 am IntermediateCustomers Are From Venus and Manufacturers Are From Mars: Connecting the Dots With ContentJames Jackson Thu. 12/3
90-Minute Class10:00 am - 11:30 am All Levels"Revit Inside": Autodesk® Revit® Architecture for the Interior DesignerPaul Aubin Thu. 12/3
90-Minute Class10:00 am - 11:30 am IntermediateRevit for Project ManagersJim Balding Thu. 12/3
90-Minute Class10:00 am - 11:30 am All LevelsMaking the Most With Autodesk® Quantity Takeoff: Connecting Take Offs to Industry Estimating SoftwareStephen Komisarek Thu. 12/3
Page 2 of 34Report Generated: 7/24/2009 4:39:59 PM
AU 2009 Classes - by Track
90-Minute Class1:00 pm - 2:30 pm AdvancedsssRobert Manna Thu. 12/3
Un-Conference1:00 pm - 2:30 pm All LevelsDigital Tools: Which, Where, and How?Jim Balding Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm IntermediateSimplify Renovations Using the Project Navigator in AutoCAD® ArchitectureJames Upton Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm IntermediatePersonalize Your Palettes in AutoCAD® ArchitectureDouglas Bowers, AIA LEED AP Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm All LevelsAutodesk® Revit® Architecture: Attention to DetailMatt Dillon Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm All LevelsAutodesk® Revit® Architecture Tips and TricksPaul Aubin Thu. 12/3
90-Minute Lab3:00 pm - 4:30 pm IntermediateFrom Fabulous to Fabrication: Real-world Digital Fabrication and BIMJeffrey McGrew Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateAn ARNG Project Autodesk® Revit® Case StudyMark Da Gama Rose Thu. 12/3
Power Track3:00 pm - 4:30 pm All levels3D Made Easy From Concept to Completion in AutoCAD®, Part 1Heidi Hewett Tue. 12/1
90-Minute Lab3:00 pm - 4:30 pm All LevelsThe Beauty of Simplicity: AutoCAD® Renderings in Seven StepsLeonardo Casado Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsBack to Flat: Producing 2D Output From 3D ModelsDavid Cohn Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All levelsGetting Up to Speed on AutoCAD® 2010Lynn Allen Tue. 12/1
Design Leadership8:00 am - 9:30 am IntermediateLooking Into the Crystal Ball: A Sneak Peek at the Future of Autodesk® Data ManagementBrian Schanen Wed. 12/2
Power Track8:00 am - 9:30 am All levels3D Made Easy From Concept to Completion in AutoCAD® (Part 2)Heidi Hewett Wed. 12/2
Un-Conference8:00 am - 9:30 am All LevelsAutoCAD®: What's Up with the CUI?R. Robert Bell Wed. 12/2
90-Minute Lab8:00 am - 9:30 am IntermediateHands on Introduction to Dynamic Blocks in AutoCAD® 2010John Beltran Wed. 12/2
90-Minute Class8:00 am - 9:30 am AdvancedOh Sheet (Set Manager)! Workflow for New ProjectsDawn Ouchi Wed. 12/2
Power Track10:00 am - 11:30 am All LevelsDesign Visualization Techniques in AutoCAD® 3DDavid Cohn Wed. 12/2
90-Minute Lab10:00 am - 11:30 am IntermediateMeshing Around with AutoCAD® 2010: Compelling Mesh Modeling TechniquesJ.C. Malitzke Wed. 12/2
90-Minute Class10:00 am - 11:30 am All LevelsBecoming an AutoCAD® Power Userdave espinosa-aguilar Wed. 12/2
90-Minute Class10:00 am - 11:30 am All LevelsWhat a Mesh! Tips and Best Practices for Working with Free-Form Design in AutoCAD®guillermo melantoni Wed. 12/2
90-Minute Class10:00 am - 11:30 am All LevelsAutoCAD® Secrets Exposed!Jeanne Aarhus Wed. 12/2
Power Track1:00 pm - 2:30 pm All LevelsPhoto-Realistic Rendering Techniques in AutoCAD® 3DDavid Cohn Wed. 12/2
Un-Conference1:00 pm - 2:30 pm All LevelsSocially Responsible Social Networking and Blogging: Best Practices, Risks and RewardsShaan Hurley Wed. 12/2
Multi Part Session1:00 pm - 2:30 pm All LevelsThe 12 Hidden Secrets of AutoCAD® Productivity Revealed!matt murphy Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All Levels2009 AutoCAD® Bloggies: Productivity Enhancing Tips From the BlogsDonnie Gladfelter Wed. 12/2
Page 5 of 34Report Generated: 7/24/2009 4:39:59 PM
AU 2009 Classes - by Track
90-Minute Class3:00 pm - 4:30 pm IntermediateThe Benefits of AutoCAD® Map 3D for General AutoCAD UsersRussell Martin Wed. 12/2
Power Track3:00 pm - 4:30 pm AdvancedParametric Drawings: Object Relationship with Geometrical and Dimensional ConstraintsJohn Beltran Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsCreating a Good ImpressionRon Palma Wed. 12/2
Multi Part Session3:00 pm - 4:30 pm All levels12matt murphy Wed. 12/2
Power Track5:00 pm - 6:30 pm All LevelsEAT TEXT: Out-of-the-Box AutoCAD®/Excel® Integrationdave espinosa-aguilar Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm IntermediateA Working Enterprise CUI in Front of Your EyesR. Robert Bell Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm All LevelsThe Best of AutoCAD®: 2007-2010David Piggott Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm IntermediateThe Dos and Don ts of Dynamic BlocksRevealed!matt murphy Wed. 12/2
Power Track8:00 am - 9:30 am AdvancedHow to Get the Most Out of the Action RecorderTom Stoeckel Thu. 12/3
90-Minute Lab8:00 am - 9:30 am IntermediateCompelling 3D Features in AutoCAD® 2010J.C. Malitzke Thu. 12/3
90-Minute Class8:00 am - 9:30 am All LevelsWhy the #!@% Did That Happen? Mysteries of AutoCAD® Revealeddeni cox Thu. 12/3
Power Track10:00 am - 11:30 am IntermediateField Density: The Functionality and Application of FIELDs in AutoCAD®dave espinosa-aguilar Thu. 12/3
90-Minute Lab10:00 am - 11:30 am IntermediateCompelling Features of 3D Part Modeling in AutoCAD® 2010J.C. Malitzke Thu. 12/3
90-Minute Class10:00 am - 11:30 am AdvancedAll Things Layers in AutoCAD®Tom Stoeckel Thu. 12/3
90-Minute Class10:00 am - 11:30 am All LevelsPublishing DWG Data to Google Earth ¢THOMAS INZINGA Thu. 12/3
Power Track1:00 pm - 2:30 pm IntermediateSoak. Wash. Rinse. Spin. Repeat 1000 Times: Passionate Scripting For Everyonedave espinosa-aguilar Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm All levels90 AutoCAD® Tips in 90 MinutesLynn Allen Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm All LevelsSize Does Matter: Annotative Scale Feature in AutoCAD®Isaac Harper Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateSignature Styles and Entourage for Autodesk® ImpressionRon Palma Thu. 12/3
Power Track3:00 pm - 4:30 pm AdvancedThe Power of Constraints Within Dynamic Blocks Revealed!John Beltran Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm All LevelsHELP! The Best Places to Look to Get SupportRob Sinclair Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateThe Productivity Power of AutoCAD® Tool Palettes Revealed!matt murphy Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm All LevelsUp And Down the Scales in AutoCAD®Bill Fane Thu. 12/3
Power Track5:00 pm - 6:30 pm Power UserManaging Your Standards and Reusable Content with AutoCAD® Tool Palettes Revealed!matt murphy Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm AdvancedOne-Pick Plotting: As Easy As It Gets!Jack Foster Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm IntermediateTwo-Handed CAD: Do Less Work to Get More FinishedBrian Benton Thu. 12/3
Page 6 of 34Report Generated: 7/24/2009 4:39:59 PM
AU 2009 Classes - by TrackBusiness Owner
Design Leadership7:00 am - 7:45 am All levelsLeading Online and Face-to-Face CommunitiesJill Keefer Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsBIM: A Business DecisionJoseph Joseph Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsCAD Management Versus CAD Leadership in Implementing Change and Boosting ProductivityAndrew Hill Tue. 12/1
Un-Conference1:00 pm - 2:30 pm IntermediateMaximize your CAD Assets With Targeted Learning and ConsultancyHans Hirschi Tue. 12/1
Power Track3:00 pm - 4:30 pm All LevelsCAD Management Trends (The Survey Says)Robert Green Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateRevit®-izing the U.S. National CAD StandardMathew Miller Tue. 12/1
Power Track8:00 am - 9:30 am IntermediateJustifying Customization in Your CAD EnvironmentRobert Green Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsGetting the Most Out of Your Computer Purchase: Hardware Myths Revealed!Jason Hickey Wed. 12/2
90-Minute Class10:00 am - 11:30 am IntermediateUtilizing Virtual Machines to Streamline Autodesk Product Installations and Increase Their PerformanceDarryl McClelland Wed. 12/2
Power Track10:00 am - 11:30 am IntermediateThe Do s and Donts of 3D ImplementationRobert Green Wed. 12/2
90-Minute Lab1:00 pm - 2:30 pm All LevelsCreating the World s Greatest AutoCAD® TemplateColleen Klein Wed. 12/2
Power Track1:00 pm - 2:30 pm IntermediateCAD Manager s Training, Standards and Productivity Guide, Part 1Robert Green Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm IntermediateThe Thankless Job of a BIM/CAD ManagerYoshi Honda Wed. 12/2
90-Minute Lab3:00 pm - 4:30 pm All LevelsIntroduction to VBScript for CAD AdministratorsDarren Young Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsA Holistic Approach to BIM Management: Merging Technology and PracticeBrian Skripac Thu. 12/3
Multi Part Session8:00 am - 9:30 am All levelsCAD Manager's Guide to Document Management with the Autodesk® Family of Products, Part 1Brian Schanen Thu. 12/3
90-Minute Class8:00 am - 9:30 am IntermediateManaging the AutoCAD® CUI, Empowering the UsersR. Robert Bell Thu. 12/3
90-Minute Class10:00 am - 11:30 am All LevelsBIM Manager: The Newest PositionMark Kiker Thu. 12/3
Multi Part Session10:00 am - 11:30 am All levelsCAD Manager's Guide to Document Management with the Autodesk® Family of Products, Part 2Brian Schanen Thu. 12/3
Un-Conference1:00 pm - 2:30 pm All LevelsHow to Maximize the Effectiveness of TrainingNigel Davies Thu. 12/3
Page 8 of 34Report Generated: 7/24/2009 4:39:59 PM
AU 2009 Classes - by Track
90-Minute Panel1:00 pm - 2:30 pm All LevelsCAD Standards Made EasyJoseph Joseph Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateEnforcing CAD Standards Using Visual LISP®R. Robert Bell Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm All LevelsHuman Management: A Non-Technical Approach to CAD ManagementDonnie Gladfelter Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm All LevelsCreating a Sense of Community Spirit: How to Build on Knowledge While Demolishing SilosAndrew Male Thu. 12/3
Page 9 of 34Report Generated: 7/24/2009 4:39:59 PM
AU 2009 Classes - by TrackCivil Engineering
90-Minute Class8:00 am - 9:30 am Power UserI Manage 2500+ AutoCAD® Civil 3D® Styles and I m Not CrazyTench Tilghman Tue. 12/1
Power Track8:00 am - 9:30 am IntermediateAggravating...Aggregating DataRick Ellis Tue. 12/1
90-Minute Lab8:00 am - 9:30 am IntermediateAnalyze This and Analyze That: A Hands-On Look at Surface Analysis Within AutoCAD® Civil 3D®JUSTIN BROOKS Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsAutoCAD® Civil 3D®: The Ten Commandments of Survey DataCreg Dieziger Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsBIM for CivilJack Strongitharm Tue. 12/1
Power Track1:00 pm - 2:30 pm IntermediateA Race from the Field to the Finish LineSCOTT MCEACHRON Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm All Levels"Breaking Up Isn't Hard to Do!" AutoCAD® Civil 3D® and MapBooksJerry Bartels Tue. 12/1
90-Minute Lab8:00 am - 9:30 am IntermediateMaking the Grade! Grading Techniques Using AutoCAD® Civil 3D®Ron Couillard Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsAutoCAD® Civil 3D®: Hot for Feature!Eddie Johnson Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsGoing Commando! Utilizing Data Shortcuts and External References to Manage AutoCAD® Civil 3D® DataJoe Hedrick Wed. 12/2
90-Minute Class8:00 am - 9:30 am Power UserThe New Design Paradigm: Intersections to Complex CorridorsTench Tilghman Wed. 12/2
Power Track1:00 pm - 2:30 pm IntermediateThe Rain on the Lanes Goes Mainly Down the DrainDana Probert Wed. 12/2
90-Minute Lab1:00 pm - 2:30 pm IntermediateDesigned for Success: Making Designs Look MagnificentAdam Peter Wed. 12/2
Virtual Session3:00 pm - 4:00 pm All LevelsUrban Transportation Design and AutoCAD® Civil 3D®: Real Projects, Real Challenges, and Real SolutionsRad Lazic Tue. 12/1
Virtual Session9:00 am - 10:00 am All LevelsThe Road to Success: Corridor ModelingSCOTT MCEACHRON Wed. 12/2
Virtual Session11:00 am - 12:00 pm AdvancedAutoCAD® Civil 3D® in a ProjectWise® WorldJames Wedding Wed. 12/2
Virtual Session1:00 pm - 3:00 pm All LevelsLeveraging AutoCAD® Civil 3D® and Autodesk® Navisworks® to Bid and Build a More Efficient ProjectSeth Cohen Wed. 12/2
Virtual Session9:00 am - 10:00 am AdvancedEngineering Geology with AutoCAD®: Go Solid!Robert Marschallinger Thu. 12/3
Virtual Session9:00 am - 10:00 am All LevelsWow! That Surface is Huge! Working with Large SurfacesKevin Faraca Thu. 12/3
Virtual Session11:00 am - 12:00 pm All LevelsThe EXPRESSway for Hydraulic AnalysisMatthew Anderson, PE Thu. 12/3
Virtual Session1:00 pm - 2:00 pm IntermediateDon t be left out in the CODEChad Studer Thu. 12/3
Page 12 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by TrackConstruction & Real Estate
90-Minute Lab8:00 am - 9:30 am Intermediate"Making Autodesk® Navisworks® Work for You: Presenter, Timeliner and Clash Detective"Zach Crumal Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsBuilding Information Model Collaboration from Concept to ConstructionBrian Skripac Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsBIM 4 Contractors: From 2D Conversions to 3D ManipulationsLaura Handler Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm IntermediateAutodesk® Navisworks: Bringing Your Construction Schedule to LifeKevin Lind Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsBIM for Construction: Connecting the Model to the Job Site and BackJoshua Kanner Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All LevelsConcrete BIM: The Use of Building Information Modeling for the Concrete ContractorDan Russell Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsAn Introduction to Autodesk® Quantity Takeoff (QTO)Kenny Deemer Wed. 12/2
90-Minute Lab5:00 pm - 6:30 pm All LevelsQuantity Takeoffs Made EasyDavid Haynes Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm All LevelsBIM 4 Contractors: Autodesk® Navisworks®, From Design To Construction To FMDavid Epps Wed. 12/2
90-Minute Class8:00 am - 9:30 am Intermediate
The Application of Autodesk® Navisworks® for Design Coordination Clash Analysis and Construction Planning on Large Building PRonan Collins Thu. 12/3
90-Minute Class10:00 am - 11:30 am All LevelsBIM Bids Only! How to Get Your Subcontractors to Bid an Autodesk® Revit® ProjectGregory Arkin Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm AdvancedAutodesk® Revit® Modeling Techniques for Construction and 4D AnalysisPatrick Villella Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm All LevelsAutodesk® Revit® Implementation: How to Use Revit During Construction to Increase Productivity and ProfitablityJosh Lowe Thu. 12/3
90-Minute Panel5:00 pm - 6:30 pm All LevelsBIM for ConstructionMarc Goldman Thu. 12/3
Virtual Session1:00 pm - 2:00 pm Intermediate
BIM Means Business! Using Autodesk® Revit® and Navisworks® in the Project Construction Management Process, Part 1james mckenzie Tue. 12/1
Virtual Session1:00 pm - 3:00 pm All LevelsIntroduction to a BIM Execution PlanMike Flieller Wed. 12/2
Page 17 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by TrackDesign Visualization
90-Minute Class8:00 am - 9:30 am AdvancedImaging Terrain in 3D with Autodesk® 3ds Max®, AutoCAD® Civil 3D®, and AutoCAD Raster DesignLuis Morillo Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm AdvancedAppropriate Daylight Metrics: Using Autodesk® 3ds Max® to Measure Real Daylight PerformanceMIchael Donn Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateVisually-Pleasing Stereoscopic Imagery for Design VisualizationJason Walter Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateOptimizing Your Autodesk® 3ds Max® Design to Newport WorkflowMark Kauffman Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm AdvancedOld McDonald Built a Render FarmJohnny Chloride Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm All Levels
How to Win More Work and Impress Existing Clients Using Autodesk® Revit® and 3ds Max® Design Together for High-End Rendering Jason Howden Tue. 12/1
90-Minute Class8:00 am - 9:30 am IntermediateAdvanced Visualization Using Autodesk® Showcase® and Maya®Chris Hall Wed. 12/2
90-Minute Class10:00 am - 11:30 am IntermediateDaylight and Lighting Analysis with Autodesk® 3ds Max® Design 2010Pierre-Felix Breton Wed. 12/2
90-Minute Class10:00 am - 11:30 am AdvancedAdvanced Entourage for High-End VisualizationJohn Shulters Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm AdvancedCapturing and Acquiring Appearances of Real World Materials for Improved Accuracy in RenderingsPierre-Felix Breton Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm IntermediateDetailing and Animation for Industrial Design Projects with Autodesk® Maya® and Mudbox ¢Marcel de Jong Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm Intermediate
Taking your Autodesk® Revit® and 3ds Max® Architectural Visualizations to a Whole New Level Using Game Engine Environmentsmarcello sgambelluri Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm AdvancedSurviving Large Scale Architectural Visualization in Autodesk® 3ds Max®Eric Mitchell Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm All LevelsRe-Inventor®-ing in Autodesk® 3ds Max® DesignStephen Gabriel Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm IntermediateThe 12 Principles of Animation Applied to VisualizationLouis Marcoux Wed. 12/2
90-Minute Class8:00 am - 9:30 am IntermediateNon-Photorealistic Rendering Techniques with Autodesk® 3ds Max®gary m davis Thu. 12/3
90-Minute Class8:00 am - 9:30 am IntermediateConverting Double-Precision Coordinate Data to Single-Precision and Back AgainMark Kauffman Thu. 12/3
90-Minute Lab10:00 am - 11:30 am IntermediateEffective Design Presentations with Autodesk® Showcase® Professional 2010Dan Dutkay Thu. 12/3
90-Minute Class10:00 am - 11:30 am All LevelsWelcome to the New Autodesk® 3ds Max® 2010 and 3ds Max Design 2010Eddie Perlberg Thu. 12/3
90-Minute Lab1:00 pm - 2:30 pm AdvancedCreating an Engaging Presentation in NewportDan Dutkay Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm All LevelsRealistic 3D Characters from Autodesk® 3ds Max® and Maya® using MotionBuilder® 2009Alfredo Villalobos Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm AdvancedBest Practices: Using Autodesk® 3ds Max® Design to Build Content for Online CommerceNOAH KENNEDY Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm All LevelsMaking Autodesk® Products Sing the Interoperability Highway SongSteve Bennett Thu. 12/3
Virtual Session11:00 am - 12:00 pm All LevelsBasic MaxScript for Architectural VisualizationNils Norgren Wed. 12/2
Virtual Session11:00 am - 12:00 pm IntermediateParametric Design Modeling with Autodesk® 3ds Max®David Fano Wed. 12/2
Page 19 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by TrackEducation & Learning
90-Minute Class8:00 am - 9:30 am All LevelsIntegrating Creativity and Technology in the ClassroomLinda Sellheim Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsUsing BIM in an Integrated Educational EnvironmentAnthony Denzer Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsDigital Prototyping and the Future of the Engineering StudentThomas Tremblay Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm All LevelsTeaching BIM: Best Practices for Integrating BIM into Architectural Curriculum?Nancy Brown Tue. 12/1
90-Minute Lab5:00 pm - 6:30 pm All LevelsHands-On Digital Prototypingmike santolupo Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsThrive with the Certification AdvantageJanice Miller Wed. 12/2
90-Minute Class10:00 am - 11:30 am All LevelsCreate the Magic like Disney Does with Tif and TiffTiffany Tucker Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All LevelsImplementing CAD Standards in Educational SettingsChris Groves Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsCAD Training That STICKS (Sustainability, Technique, Interoperability, Curricula, Kinetics, Success)Nancy Tremblay Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm All LevelsIndustrial Design and Mechanical Engineering: Bridging the Great DivideRoxie Hecker - ACTUAL SPEAKER TBD
Wed. 12/2
90-Minute Panel10:00 am - 11:30 am All LevelsCreativity in Design Education: Transitioning From Intuitive Creativity to Digital Solutionsstephen stott Thu. 12/3
90-Minute Panel3:00 pm - 4:30 pm All LevelsWhat Industry Needs From Their Newest EmployeesAlissa Perlstein Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm All Levels
Simulating the Collaborative Design Process in Higher Education Through a Case Study of Multidisciplinary Integrated Project Eric Dunn Thu. 12/3
Virtual Session3:00 pm - 4:00 pm All LevelsYour Professor Should be Able to Help You: EngineersRule.comJ.D. Mather Tue. 12/1
Virtual Session9:00 am - 10:00 am All LevelsTeaching in the Virtual Classroom: Tools, Tips and Techniques for eLearningdon schwartz Thu. 12/3
Virtual Session11:00 am - 12:00 pm All LevelsIncorporating Software Simulation Into Web-Based TrainingDan Leighton Thu. 12/3
Page 20 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by TrackFacilities Management
90-Minute Class5:00 pm - 6:30 pm IntermediateBIM and FM: Bridging the DivideJoseph Wurcher Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsReal-World Traction with Green BuildingsJoseph Wurcher Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All LevelsFrom Lonely BIM to Social BIM: Moving Beyond Design to FMSean Benson Wed. 12/2
Un-Conference3:00 pm - 4:30 pm AdvancedBIM to FM: The Emerging ArtMark Evans Wed. 12/2
90-Minute Panel8:00 am - 9:30 am All LevelsA Scanner Darkly: Making Use of Laser Scanning for Design and ConstructionBeau Turner Thu. 12/3
90-Minute Class10:00 am - 11:30 am AdvancedIntegrating Your A/E Consultant's Autodesk® Revit® Models into Facility ManagementDavid Spehar Thu. 12/3
Power Track3:00 pm - 4:30 pm AdvancedGet Your Autodesk® Revit® Model Ready for FMDavid Spehar Thu. 12/3
90-Minute Lab5:00 pm - 6:30 pm IntermediateRevit Architecture and Facilities Management: What's in Your Toolbox?Clyne Curtis Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm IntermediateUsing Autodesk® Revit® as an FM Tool: Does That Make AutoCAD® a Bit of a Dinosaur?Shaun Bryant Thu. 12/3
Virtual Session1:00 pm - 2:00 pm AdvancedDon't Get Floored In Your Facility: Autodesk® Revit® Architecture as an Effective Facilities Management ToolChristopher Fernandez Tue. 12/1
Page 21 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by TrackGeospatial
90-Minute Class8:00 am - 9:30 am IntermediateFrom CAD to Autodesk® Topobase ¢: Migration to Enterprise GISLouis Ball Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsFrom AutoCAD® Map 3D to Autodesk MapGuide® in Three Simple Steps: Connect, Stylize, PublishWarren Medernach Tue. 12/1
90-Minute Lab3:00 pm - 4:30 pm IntermediateClassy Mapping: AutoCAD® Map 3D Feature ClassificationBob Hayes Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsRaster Imagery for Mapping and Land Development ProfessionalsDavid Zavislan Tue. 12/1
Virtual Session9:00 am - 10:00 am IntermediateProduct Narratives: Telling the Complete Story of What Your Design Is All AboutMax Sims Thu. 12/3
Virtual Session1:00 pm - 2:00 pm Power UserEngineer Marketing With Autodesk® Showcase®Mike Prom Thu. 12/3
Page 24 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by TrackManufacturing
Design Leadership8:00 am - 9:30 am All LevelsIndustrial Design Methodology for the MassesKevin Richards Tue. 12/1
Power Track8:00 am - 9:30 am IntermediateCreating and Using AutoCAD® Inventor® iParts and iMatesBill Fane Tue. 12/1
90-Minute Lab8:00 am - 9:30 am All LevelsShowcase Your DesignStephen Gabriel Tue. 12/1
90-Minute Class8:00 am - 9:30 am AdvancedSetting Up Autodesk® Vault Manufacturing for AutoCAD® ElectricalRandy Brunette Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsSecrets to Passing the AutoCAD® Certification Exams Revealed!matt murphy Tue. 12/1
Power Track1:00 pm - 2:30 pm IntermediateEffective Use of Representations in Autodesk® Inventor®Paul Normand Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsReal Life Applications: Practical Engineering Purposes for AutoCAD® Electrical (It s Not Just for Drafting)Elvis Sverko Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm IntermediateAutodesk® Inventor® 2010 Certified Associate and Professional Exam Preparation ClassDan Banach Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsA Sneak Peek: The Next Release of Autodesk® Inventor®Garin Gardiner Tue. 12/1
Power Track3:00 pm - 4:30 pm All LevelsSelective Productivity, Autodesk® Inventor® Selection FiltersAllen Gager Tue. 12/1
90-Minute Lab3:00 pm - 4:30 pm IntermediateParametric and Intelligent Content Libraries with AutoCAD® MechanicalLakshmanan Lakshmanan Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsDigital Prototyping: The Rosetta StoneJay Tedeschi Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm Power UserAutoCAD® Electrical Power Tools for Power UsersRob Stein Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateStrategies in Designing Plastic Products That Are Lightweight, Strong, and Green (Sustainable)Hanno van Raalte Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm IntermediateBest Practices in Plastic Part and Mold DesignMurali Annareddy Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm All LevelsThe Convergence of BIM and Digital PrototypingRobert Cohee Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm All LevelsSustainable Product Design in Digital PrototypingRoxie Hecker - ACTUAL SPEAKER TBD
Tue. 12/1
Power Track8:00 am - 9:30 am IntermediateThe iLogical Course: They ll be Calling You a Radical!Sam Antos Wed. 12/2
90-Minute Lab8:00 am - 9:30 am All LevelsA Quick Spin on AutoCAD® Electrical 2010Randy Brunette Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsOverview of Plastics in Consumer, Auto/Transport, and Building ProductsNick Smith Wed. 12/2
90-Minute Class8:00 am - 9:30 am IntermediateAutoCAD® Electrical: Terminal VelocityNicole Morris Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsAutodesk® Inventor® Simulation R2011 Sneak PeekPeter Maxfield Wed. 12/2
90-Minute Class8:00 am - 9:30 am All levelsCAD Manager's Guide to Document Management with the Autodesk® Family of Products, Part 1Pascal Le Guellec Wed. 12/2
Page 25 of 34Report Generated: 7/24/2009 4:40:00 PM
AU 2009 Classes - by Track
90-Minute Class10:00 am - 11:30 am IntermediateUsing Dynamic Simulator to Prove Your DesignRollin Godette Wed. 12/2
Power Track10:00 am - 11:30 am All LevelsSurface Modeling from A to Z with Autodesk® Inventor® 2010Jay Tedeschi Wed. 12/2
90-Minute Lab10:00 am - 11:30 am IntermediatePlastic Part and Mold Design Validation Using Autodesk® Moldflow® SoftwareBrian Sather Wed. 12/2
90-Minute Class10:00 am - 11:30 am IntermediateRevealed: The Secrets of AutoCAD® Inventor® Derived PartsBill Fane Wed. 12/2
90-Minute Class10:00 am - 11:30 am All LevelsUsing Autodesk® Vault for Collaboration Between Purchaser and SuppliersDriss Yammouri Wed. 12/2
90-Minute Class10:00 am - 11:30 am All levelsCAD Manager's Guide to Document Management with the Autodesk® Family of Products, Part 2Pascal Le Guellec Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsDigital Manufacturing: Know It's Right Before It Leaves the BuildingChris Hall Wed. 12/2
Power Track3:00 pm - 4:30 pm All LevelsHoly Sheet Metal! Making the Most of Autodesk® Inventor® 2010 Sheet Metal FeaturesThomas Tremblay Wed. 12/2
90-Minute Lab3:00 pm - 4:30 pm All LevelsMechanical Simulation with Autodesk® Inventor® ProfessionalShakeel MIRZA Wed. 12/2
Power Track1:00 pm - 2:30 pm IntermediateIt s Not Sign Language: Designing Custom Sketched Symbols in Drawings Using Autodesk® Inventor®.Mark Flayler Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm All LevelsBuilding Fabrication: A Peek Behind the Curtain...WallRobert Cohee Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateBecome the Master: New Multibody Modeling Technique in Autodesk® Inventor® 2010ralph hartmann Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm All LevelsIntegrating Autodesk® Vault Manufacturing with Enterprise ApplicationsJim Dodds Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm IntermediateTaking the Dysfunction Out of Your Autodesk® Revit® Families: Best Practices for Manufacturer BIM ContentShawn Zirbes Thu. 12/3
Page 28 of 34Report Generated: 7/24/2009 4:40:01 PM
AU 2009 Classes - by TrackMEP Design & Engineering
90-Minute Class8:00 am - 9:30 am IntermediateThe Key Is in the Content: Plumbing FamiliesJarrod Baumann Tue. 12/1
90-Minute Class8:00 am - 9:30 am IntermediateNew Tips and Tricks for Piping in AutoCAD® MEPGregg Stanley Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsAn In-Depth Look at Autodesk® Revit® MEP/FP Content From an Engineer's PerspectiveChristopher Di Iorio Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm IntermediateThe Key is in the Content: Electrical FamiliesJoel Londenberg Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm Power UserAll About the Basics: Piping and Plumbing for AutoCAD® MEP 2010Phil Nower Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsMaking the Leap From AutoCAD® MEP to Revit® MEPChris Chase Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateWorking in a Dual CAD Program EnvironmentDavid Butts Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm IntermediateIt Finally Flows Downhill: Sloped Piping in AutoCAD® MEP 2010Gregg Stanley Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm IntermediateReal Life Plumbing Design in Autodesk® Revit® MEPAmelia McCracken Wed. 12/2
90-Minute Panel5:00 pm - 6:30 pm All LevelsMastering AutoCAD® MEP: Ask the ExpertsPaul Aubin Wed. 12/2
90-Minute Lab8:00 am - 9:30 am All LevelsAutoCAD MEP: Setting Up for Mechanical DesignsBeth Powell Thu. 12/3
90-Minute Class8:00 am - 9:30 am AdvancedHow to Use BIM Tools for Aiding the Development of Energy Audits for Performance ContractingMitch Dec Thu. 12/3
90-Minute Class8:00 am - 9:30 am IntermediateParametric Fitting and Equipment Content Creation for AutoCAD® MEPDarryl McClelland Thu. 12/3
90-Minute Class10:00 am - 11:30 am IntermediateHow to Plan for Success in Your BIM ProjectsAndrew Bagnall Thu. 12/3
Page 29 of 34Report Generated: 7/24/2009 4:40:01 PM
AU 2009 Classes - by Track
90-Minute Class10:00 am - 11:30 am IntermediateAutoCAD® MEP Tips and Tricks for Ductwork and PipingDarryl McClelland Thu. 12/3
90-Minute Class10:00 am - 11:30 am Advanced
Heating and Cooling Load Calculations and Energy Model Development from an Autodesk® Revit® MEP Model Utilizing gbXMLPhillip Cunningham Thu. 12/3
Power Track1:00 pm - 2:30 pm All LevelsIntegrated Project Delivery and Energy Efficient DesignAryn Bergman Thu. 12/3
90-Minute Lab1:00 pm - 2:30 pm IntermediateThe Key is in the Content: HVAC FamiliesJoel Londenberg Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm All LevelsAutodesk® Revit® MEP 2010: Powerful Tips and TricksDavid Butts Thu. 12/3
90-Minute Class1:00 pm - 2:30 pm IntermediateThe Real Engineers Workflow: MEP Massing for Pre-Design AnalysisSimon Whitbread Thu. 12/3
90-Minute Lab3:00 pm - 4:30 pm All LevelsDuct, Duct, Route! Getting Your Ducts in a Row! HVAC System Designs in Autodesk® Revit® MEPMichael Schinn Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateDisplay System for AutoCAD® MEP: A Detailed Dive into Display ManagerGregg Stanley Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm All LevelsImplementing 3D Design on Water and Wastewater ProjectsJohn Morgan Thu. 12/3
Page 31 of 34Report Generated: 7/24/2009 4:40:01 PM
AU 2009 Classes - by TrackStructural Design & Engineering
90-Minute Class8:00 am - 9:30 am AdvancedEssential Autodesk® Revit® Structure Project Template TechniquesChristopher Fernandez Tue. 12/1
90-Minute Class8:00 am - 9:30 am IntermediateMaximize the Use of Autodesk® Revit® Structure ExtensionsGeorge Ikonomakis Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsAltiscad Optimizer®: Visual Exploration of Optimization in Autodesk® Robot ¢ Structural AnalysisGheorghe Ionica Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm IntermediateUtilizing Autodesk® Revit® Structure to Model and Document Concrete ReinforcingMichael W. Sullivan Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm Advanced
The power of API: Advanced Plastic Investigation of Reinforced Concrete Elements Using Autodesk® Robot ¢ and Revit® StructuraGheorghe Ionica Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsLeveraging Autodesk® Revit® Structure as an EngineerDezi Ratley Wed. 12/2
90-Minute Class8:00 am - 9:30 am IntermediateConcrete Reinforcement with Autodesk® Revit® Structure and Robot ¢ Structural AnalysisBrian Johnson Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All LevelsAutodesk® Revit® Structure: A New Approach to Structural Design IntegrationKevin Lea Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm AdvancedEvaluating, Designing, and Creating Design Applications for AutoCAD® Revit® Structure: You Can Do This!Mike King Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm All LevelsStructure or Standards? Do Both!David Harrington Wed. 12/2
90-Minute Class3:00 pm - 4:30 pm AdvancedAdvanced Structural Assemblies and Data Delivery with Autodesk® Revit® StructureAnthony Buccellato Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm IntermediateNot All Trusses Require the Autodesk® Revit® Structure Truss ToolNick Hugley Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm IntermediateReading Between the Reference LinesBrian Mackey Wed. 12/2
90-Minute Class8:00 am - 9:30 am IntermediateIntegrated Modeling for Successful Project Delivery Using Autodesk® Revit®David Odeh Thu. 12/3
90-Minute Lab8:00 am - 9:30 am IntermediateYes! You Can Document Your Autodesk® Revit® Structure ModelJonathan Brazier Thu. 12/3
90-Minute Class8:00 am - 9:30 am All LevelsUsing Autodesk® Revit® Structure to Reduce Labor and Maximize BenefitsJoy Beers SE LEED AP Thu. 12/3
Power Track10:00 am - 11:30 am IntermediateStreamlined Structural Analysis Using Autodesk® Revit® Structure and RISA ¢Deborah Brisbin Thu. 12/3
90-Minute Lab10:00 am - 11:30 am AdvancedAdvanced Autodesk® Revit® Families for Structural Engineering and Design: The Lab!Steve Mintz Thu. 12/3
90-Minute Class3:00 pm - 4:30 pm IntermediateStructural Detail Components: What They Didn't Tell YouAdam Sheather Thu. 12/3
Page 32 of 34Report Generated: 7/24/2009 4:40:01 PM
AU 2009 Classes - by Track
90-Minute Class3:00 pm - 4:30 pm Advanced
Manage Details, Sheet Templates, and Their Interoperability with Autodesk® Revit® Architecture and Revit Structuredarick brokaw Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm All LevelsBridge Engineering and Its 3D Design ChallengesMarie-Pierre Lebel Thu. 12/3
90-Minute Class5:00 pm - 6:30 pm Power UserPushing Autodesk® Revit® to Its Limits: Creating Non-building Revit Familiesmarcello sgambelluri Thu. 12/3
Virtual Session1:00 pm - 2:00 pm IntermediateModeling Complex Surfaces and Structures Using the New Modeling Tools for Autodesk® Revit® 2010marcello sgambelluri Tue. 12/1
Virtual Session9:00 am - 10:00 am Intermediate
An Overview of the Composite Design Capabilities of Autodesk® Revit® Structure and Robot® Structural Analysis 2010 ProductsDavid Odeh Wed. 12/2
Virtual Session11:00 am - 12:00 pm All LevelsA Bridge to Anywhere: How to use the Autodesk® Revit® Structure Bridge ToolkitPatrick Villella Wed. 12/2
Virtual Session1:00 pm - 3:00 pm All LevelsAutoCAD® Structural Detailing Standards and Template DevelopmentAdam Sheather Wed. 12/2
Virtual Session11:00 am - 12:00 pm Power UserCustomize the Autodesk® Revit® Graphical Column Schedule for Large and Complex ProjectsFares Ghannam Thu. 12/3
Virtual Session1:00 pm - 2:00 pm IntermediateStructural Design Using Autodesk® Robot® Structural AnalysisBrian Johnson Thu. 12/3
Page 33 of 34Report Generated: 7/24/2009 4:40:01 PM
AU 2009 Classes - by TrackUtility & Telecommunication
90-Minute Class8:00 am - 9:30 am All LevelsBringing Mobile Field Updates into AutoCAD® Map 3D EffortlesslyGlenn Vlass Tue. 12/1
90-Minute Class1:00 pm - 2:30 pm All LevelsUsing AutoCAD® Map 3D as an S.U.V. (Software Utility Vehicle): Utility Design in Map 3D 2010Ron Couillard Tue. 12/1
90-Minute Class3:00 pm - 4:30 pm All LevelsGIS for the Utility or Municipality with AutoCAD® Map 3DRick Chappell Tue. 12/1
90-Minute Class5:00 pm - 6:30 pm Power UserCAD, GIS, ERP and Web Integration at Ergon Energymark volz Tue. 12/1
90-Minute Class8:00 am - 9:30 am All LevelsUsing AutoCAD® Inventor® to Electrify the GridAndy Warren Wed. 12/2
90-Minute Class1:00 pm - 2:30 pm All LevelsSpatial Analysis in a CAD-Driven GISTim Jones Wed. 12/2
90-Minute Class5:00 pm - 6:30 pm All LevelsAutodesk Utility Design at APS, Phase 2 : What the Heck Did We Do in 2009?Richard Hammitt Wed. 12/2
90-Minute Class8:00 am - 9:30 am All LevelsIntegrate Autodesk® Topobase ¢ with other systems and get more value out of your dataSebastian Baumhekel Thu. 12/3
90-Minute Class10:00 am - 11:30 am Intermediate
Water and Wastewater Network Management Using Autodesk Topobase ¢, AutoCAD® Map 3D and MapGuide® EnterprisePat Byrne Thu. 12/3
90-Minute Panel1:00 pm - 2:30 pm All LevelsManage Electric Utility Assets and Designs with Autodesk® Topobase ¢ and AutoCAD® Map 3D: A Case StudyPeter Krotky Thu. 12/3
Virtual Session1:00 pm - 3:00 pm All LevelsMapping Water Quality with RESTful Web Services for MapGuide®Haris Kurtagic Wed. 12/2
Page 34 of 34Report Generated: 7/24/2009 4:40:01 PM