ATTACHMENTS - John Deere IT · 6030 series tractors-4 attachments - factory and field installed issue 03-2010 (eame) 2 hydraulics 2.1 mechanically-actuated selective control valves

6030 SeriesATTACHMENTS

Edition 03/2010 • EAME

Issue 03-2010 (EAME) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Tractors-1

ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.

Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.

1 Drive System

1.1 CREEPER KITS

Models: 6130 - 6630 and 6534

Note:This software related field installation kitmust be ordered with indication of tractorserial number!

Note:Depending on the options of the tractor,additional spare parts may be required.

Code Bundle Description

AL173288Creeper kit, PowrQuad Plus orAutoQuad Plus transmission,40 km/h (25 mph), 6 ranges

Bundle Description Remark QTY

AL201022 Creeper housingwith dowel pins 1

AL180063Field installation kitwith cab componentsfor creeper lever

1

AL172602 Suction line for 4 cyl. tractors 1AL168627 U-joint, drive shaft for 4 cyl. tractors 1

L168349 Shape hose(coolant inlet) for 4 cyl. tractors 1

L168350 Shape hose(coolant return) for 4 cyl. tractors 1

AL172604 Suction line for 6 cyl. tractors 1AL166275 U-joint, drive shaft for 6 cyl. tractors 1



6030 Series Tractors-2 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 03-2010 (EAME)

Models: 6130 - 6630 and 6534

Note: This software related field installation kitmust be ordered with indication of tractorserial number!

Note: Depending on the options of the tractor,additional spare parts may be required.

Models: cab only: 6830




AL173291Creeper kit, PowrQuad Plustransmission, 40 km/h (25 mph),4 ranges



1

AL172602 Suction line for 4 cyl. tractors 1AL168627 U-joint, drive shaft for 4 cyl. tractors 1AL155069 Oil line assembly for 4 cyl. tractors 1AL155071 Oil line assembly for 4 cyl. tractors 1



AL172604 Suction line for 6 cyl. tractors 1AL166275 U-joint, drive shaft for 6 cyl. tractors 1AL155072 Oil line assembly for 6 cyl. tractors 1AL159474 Oil line assembly for 6 cyl. tractors 1




AL173422

Creeper kit,PowrQuad Plus transmission, 40 km/h(25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)



1

RE201075 Transmission outputshaft with bushing 1

L64500 Loctite 574 1


Models: cab only: 6930



Models: 6130 - 6630 and 6534



Models: 6130 - 6630 and 6534

Note:This software related field installation kitmust be ordered with indication of tractorserial number!


Models: 6130 - 6630, 6534, cab only: 6830 and 6930


AL173423

Creeper kit,PowrQuad Plus transmission, 40 km/h(25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)



1

RE201075 Transmission outputshaft with bushing 1

L64500 Loctite 574 1


AL173292 Creeper kit, SyncroPlus transmission,4 ranges


AL180063Field installation kit withcab components forcreeper lever

1

AL164740 Suction line 1AL172598 Suction line 1AL166528 U-joint, drive shaft for 4 cyl. tractors 1AL169155 U-joint, drive shaft for 6 cyl. tractors 1AL155400 Connector 1L157513 Clamp 4AL159997 Formed hose, assy. for 4 cyl. tractors 1AL159998 Formed hose, assy. for 4 cyl. tractors 1AL158909 Formed hose, assy. for 6 cyl. tractors 1AL158910 Formed hose, assy. for 6 cyl. tractors 1


AL173294 Creeper kit, SyncroPlus transmissionwith PowrReverser, 4 ranges


AL180063Field installation kit withcab components forcreeper lever

1

AL168627 U-joint, drive shaft for 4 cyl. tractors 1AL160006 Formed hose, assy. for 4 cyl. tractors 1AL160025 Formed hose, assy. for 4 cyl. tractors 1AL166277 U-joint, drive shaft for 6 cyl. tractors 1AL159999 Formed hose, assy. for 6 cyl. tractors 1AL160019 Formed hose, assy. for 6 cyl. tractors 1


AL180063 Field installation kit with cabcomponents for creeper lever


2 HYDRAULICS

2.1 MECHANICALLY-ACTUATEDSELECTIVE CONTROL VALVES -

M-SCV

The M-SCVs provide a full range of features whichgives the flexibility to operate all hydraulic equipmenton the farm. The M-SCVs are located at the rear of thetractor. The selective control valves may be used inany of the available positions.

Three different M-SCV versions are available:100 Series, 200 Series or 300 Series. These M-SCVscan be used with PFC hydraulic system (axial pistonpump) as well as with PC hydraulic system (gearpump).

The M-SCV field kit contains as well thecorresponding quick couplers. The below listedactuating kits have to be ordered separately accordingto the mounting position of the M-SCV and this kitsinclude the new color-coded dust protection housings.

100 Series M-SCVThis mechanical valve features:

• 4 position lever control with detent setup• Removable detent collar to change from detent to

no detent• Maximum flow up to 60 litres/min


Note: This selective control valve may be operated by aseparat control lever or by a multi-functionlever.

200 Series M-SCVIn addition to the features of the 100 Series mechanicalvalve, the 200 Series valve feature:

• Max. flow infinitely adjustable from 0 to 65 litres/min (only up to 54 litres/min with small pump)

• Selectable detents allow switching between nodetent ideal for loader operation and mechanicaldetent for continuous hydraulic motor operation

• Load check valve on the lower port preventsloader and implement linkage creep

The control dial is located on the SCV and can bereached from the operator’s seat.


Note: Please order in addition:1 x L65382 Hose, 7.5 mm in dia1 x L65383 Hose, 5.0 mm in dia.



7211 AL180369 M-SCV Series 100 withstandard quick couplers


7214 AL180370 M-SCV Series 200 withDeLuxe quick couplers


350 Series M-SCVwith low leakage functionIn addition to the low leakage function the 350 SeriesSCVs offer the same hydraulic functions as the 300Series SCVs like e.g. three selectable hydraulicfunctions (no detent, continuous detent, „kickout“detent).

Benefits of low leakage function:• Provides better retaining of implements in

intended position, if selective control valve is inneutral position.

• Reduce internal oil leakage to minimum.• Ensures that the tractor’s hydraulic supply works

almost free from leakage.



Actuating kits - LeverFor M-SCV installation on Position I

For M-SCV installation on Position III

Actuating kits - Multi-function LeverFor M-SCV installation on Position III and/or IV

2.2 M-ICV

Mechanical IndependentControl Valve (M-ICV)




AL181054 M-SCV Series 350 withDeLuxe quick couplers


AL180372Control parts andcolor-coded dust protectionhousing in green for hydaulicquick couplers

controls SCVat position I 1


AL180374Control parts andcolor-coded dust protectionhousing in brown for hydaulicquick couplers

controls SCVat position III 1


AL180376

Multi-function lever with2 functions and color-codeddust protection housingin brown and black forhydaulic quick couplers

controls SCVat position IIIand IV

1

Code Bundle DescriptionAL179315 M-ICV field kit (2 functions)


AL180657 Single lever control(2 functions)

with cab:6130 - 6930, 6534 1


with open station:6130 - 6630, 6534 1


with low profileopen station:6130 - 6430, 6534

1

AL203508

ICV lines

Power Beyond Housingat position 3

for PC hydraulic system(gear-type pump)

6130 - 6630, 6534 1

AL203509

ICV lines



6130 - 6630, 6534 1

AL203510

ICV lines



with cab:6830 and 6930 1

AL203511

ICV lines





Models: cab only: 6130 - 6930 and 6534


Code Bundle DescriptionAL179316 M-ICV field kit (3 functions)


AL180658Single lever controlwith diverter switchesand HI-LO shifting(3 functions)

with cab:6130 - 6930, 6534 1

AL203508

ICV lines



with cab:6130 - 6630, 6534 1

AL203509

ICV lines



with cab:6130 - 6630, 6534 1

AL203510

ICV lines




AL203511

ICV lines





3 ENGINE

Bottom guard for fuel tanksRecommended in adverse conditions, like scrub,woodland or land reclamation.

Models: 6530, 6534 and 6630

Models: 6230 - 6430, cab only: 6130


Models: cab only: 6830 and 6930Code Bundle Description8875 AL118241 Base guard for fuel tank, 207 l


8875 AL156243 Base guard for fuel tank(160 l, 165 l, 185 l)

Code Bundle Description8875 AL159939 Base guard for fuel tank, 250 l

Code Bundle DescriptionAL163513 Base guard for fuel tank, 325 l


Fuel PreheaterParticularly important in the cold season, fuelpreheaters prevent fuel waxing and subsequent filterblockage by automatically actuating a heater elementin the filter at low temperatures.


Cold start packagesWith a cold start package your tractor is fully preparedfor cold weather conditions. All required mountingparts are included in the field installation kit.


Note: not for tractors with AutoPowr transmissionNote: if the tractor is not already equipped with a

coolant pre-heater please order in addition 1 xAL173954 coolant pre-heater, 230 V

Coolant pre-heaterA cold start - defined as a start with an enginetemperature lower than 10°C - places stress on theengine. Due to the quick and unbalanced heating of theengine, parts wear out more rapidly. With the help of acoolant heater the engine block is warmed andtherefore provides an easier start and reduces wear.Furthermore, it is important that the engine reaches it’soptimum operating temperature as fast as possible.This reduces fuel consumption and reduces exhaustemissions. Result: lower operating costs and lessenvironmental pollution.


Code Bundle DescriptionAL158520 Fuel Preheater


9020 AL173953Cold start package, 230 V(charge pump pre-heater andtransmission pre-heater)

Code Bundle Description9030 AL173954 Coolant pre-heater, 230 V


4 ELECTRICAL - ELECTRONICAL COMPONENTS

4.1 LIGHTS

Headlights H4, beltline-mountedThese adjustable head lamps are fitted left and right tothe beltline of the cab. The halogen-type H4 bulbsprovide excellent illumination to the front and arestrongly recommended if front mounted equipment isto be used, especially e.g. for highway use when aloader or front linkage mounted implements obscurethe beam of the normal head lamps.



Working Lights H3, beltline-mountedThese adjustable working lights are fitted left and rightto beltline of the cab and offer outstandingillumination to the front working area as well as formounted implements.


Working Lights H3,cab-roof mounted



Front Corner Working Lights H3Sideways integrated in the front grille next to the frontheadlights, may be switched off for road travel.Provide superior illumination of the front working areaas the corner work lights are directed downward andoutward to light up the area immediately inside andahead of the front wheels. This will help operatorsfollowing a plough furrow or drill marker furrow atnight - for better working conditions and increasedproductivity.



9070 AL179967 2 beltline-mounted headlights H4,for right hand traffic


9070 AL179969 2 beltline-mounted headlights H4,for left hand traffic


AL179975 2 Working Lights H3,beltline-mounted on cab frame


AL1799702 Working Lights H3,cab-roof mounted,FRONT


AL1799712 Working Lights H3,cab-roof mounted,REAR

Code Bundle DescriptionAL202564 Front Corner Working Lights H3


Working Light H3,fender-mounted rear


Note: can be installed RH or LH


AL179973 1 Working Lightfender-mounted rear


4.2 MISCELLANEOUS

Multiple power outlet socket



Powerstrip AdaptersPowerstrip adapters allow electrical connection formonitors and equipment not fitting the tractor’sstandard powerstrip or 3-pin outlets. Availableadapters include:

• 1 m (39.37 inch) cable for custom hard-wiring tocomponents

• Cigarette lighter-style outlet• North American-style flat 3-pin adapter• European-style round 3-pin adapter

Powerstrip adapters can also be used with the FieldOffice.





3-terminal power outlet socketThe 3-pin socket provides both 5 and 25 amp suppliesfrom the first two pins. The third pin is connected toearth.


Code Bundle DescriptionAL158785 Multiple power outlet socket

Bundle Description QTYAL117211 Bracket 1


RE67013Adapter standard connector(with 1 m / 39.37 inch cable for hard-wiring electrical components)

Code Bundle DescriptionRE67014 Adapter cigarette lighter outlet

Code Bundle DescriptionRE67015 Adapter 3-pin North American

Code Bundle DescriptionRE67016 Adapter 3-pin European

Code Bundle DescriptionAL203918 3-terminal power outlet socket


Battery cut-off switchPerformance and power are very important for yourdaily work with agricultural machinery, but sometimespower needs to be cut off. For example, when thetractor is left unattended or during welding operations,when special safety measures need to be considered,the battery should be shut down.

Therefore John Deere offers battery cut-off switchesfor field installation. These kits protect the batteryfrom damage resulting from short circuits as well asfrom discharging due to monitors or radios leftswitched on when the engine is turned off. As a visualstatus indicator a LED lamp is turned on when batteryis connected.

In addition to this, conversion kits are availableallowing to operate battery cut-off switchesconveniently from inside the cab and to react evenmore quickly in case of emergency. Please considerthat in some countries it is mandatory for insurancereasons to use this type of battery cut-off switches.

Battery cut-off switch outside cab

Models: cab only: 6130 - 6430

Note: If required, please use Vaseline G-PF1 forpositive terminal of battery.


Note: If required, please use Vaseline G-PF1 forpositive terminal of battery.

Battery cut-off switch inside the cab

Models: 6130 - 6930 and 6534

Back-up alarm

For customers who require an alarm in reverse speed.It is rear mounted.


Code Bundle Description9015 AL174696 Battery cut-off switch (4 cyl.)

Code Bundle Description9015 AL174697 Battery cut-off switch (6 cyl.)


AL180201 Conversion kit cut-off switchfrom outside to inside cab

Code Bundle DescriptionAL158728 Field installation kit for back-up alarm


5 MISCELLANEOUS

5.1 OPERATOR´S STATION

Super Air Comfort seat - MSG95Air suspended seat features:

• Air suspension• Horizontal adjustment 210 mm (8.27 inch) for

easy positioning in the cab.• 100 mm (3.94 inch) vertical suspension travel to

absorb even the hardest shocks.• Backrest angle adjustment: Individual backrest

inclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.

• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.

• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size.

• Mechanical lumbar support• Horizontal suspension (45 mm / 1.77 inch) to

damp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Foldable armrest with height and angleadjustment: Wide and ergonomically contouredarmrests can be individually adjusted. Ensureperfect posture in the seat and relaxed armposition. Important: Armrests that are positionedtoo low promote an asymmetrical posture andarmrests that are positioned too high lead toshoulder or neck pain.

• Operator’s manual holder: always on hand and in atidy appearance.

• Seat switch• Adjustable swivel +/-15° for easy access in and

out of the seat as well as easier control of rearimplements.


Note: includes:- mechanical lumbar support- standard seat cushion (76,2 mm / 3 inch)

Note: order in addition seat belt AL117366 andtelescopic backrest extension AL174234

Air Comfort seat - MSG93Air suspended seat features:

• Air suspension• Horizontal adjustment 150 mm (5.91 inch) for

easy positioning in the cab.• 80 mm (3.15 inch) vertical suspension travel to

absorb even the hardest shocks.• Backrest angle adjustment: Individual backrest


• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.

• Height adjustment (60 mm / 2.36 inch) for an idealseat position for every body size.



• Foldable armrest• Operator’s manual holder: always on hand and in a

tidy appearance.• Seat switch• Optional telescopic backrest extension


Note: includes mechanical lumbar supportNote:order in addition seat belt AL117366


AL175598Super Air Comfort seat MSG95,air suspended with operatorpresence switch


AL179256Air Comfort seat MSG93,air suspended with operatorpresence switch


Super Comfort seat - MSG85

Mechanical suspended seat features:• Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for

easy positioning of the seat within the tractor cab• 100 mm (3.94 inch) vertical suspension travel to

absorb even the hardest shocks• Backrest angle adjustment: Individual backrest


• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety

• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size



• Foldable armrest• Seat switch


Note: order in addition seat belt AL117366

Super Comfort seat - MSG85Mechanical suspended seat features:

• Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for








• Foldable armrest with height and angleadjustment: Wide and ergonomically contouredarmrests can be individually adjusted. Ensureperfect posture in the seat and relaxed armposition. Important: Armrests that are positionedtoo low promote an asymmetrical posture andarmrests that are positioned too high lead toshoulder or neck pain.

• Seat switch• Adjustable swivel +/-15° for easy access in and

out of the seat as well as easier control of rearimplements.

• Optional operator’s manual holder

Models: without cab: 6130 - 6630, 6534, 6225 - 6525

Note: order in addition seat belt AL117366Code Bundle Description

AL175599 Super Comfort seat - MSG85,mechanical suspended


AL179257 Super Comfort seat - MSG85,mechanical suspended


Comfort seat - MSG83Mechanical suspended seat features:

• Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for






• Horizontal suspension (45 mm / 1.77 inch) todamp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Foldable armrest• Operator’s manual holder: always on hand and in a

tidy appearance.• Seat switch• Optional telescopic backrest extension and

mechanical lumbar support


Note: order in addition seat belt AL117366

Comfort seat - MSG83

Mechanical suspended seat features:• Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for






• Foldable armrest• Seat switch• Optional telescopic backrest extension, Operator’s

manual holder, adjustable swivel and mechanicallumbar support

Models: without cab: 6130 - 6630, 6534, 6225 - 6525

Note:order in addition seat belt AL117366


AL179254 Comfort seat - MSG83,mechanical suspended


AL179255 Comfort seat - MSG83,mechanical suspended


Instructional seat


Suspension for Instructional seat


Safety belt for instructional seat


Leather steering wheelThe new dark-brown leather steering wheel is elegantin appearance and provides a comfortable grip evenduring long working days!

It is produced in the high-standard John Deere qualityand features the same adjustability as the standardsteering wheel.


Code Bundle Description9230 AL173569 Instructional seat (not suspended)

Code Bundle DescriptionAL173570 Suspension for Instructional seat

Code Bundle DescriptionAL117734 Safety belt for instructional seat

Code Bundle DescriptionAL173828 Dark brown leather steering wheel


Inner rear view mirror


Internal rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.


External MirrorsLarge external mirrors provide increased trafficawareness for improved road safety and aid trailerreversing.

Telescopic rear view mirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.



Code Bundle Description9205 AL175679 Inner rear view mirror


AL151224 Additional inside rear view mirror,rear installation

Code Bundle Description7706 AL80126 Left hand telescopic rear view mirror

Code Bundle Description7706 AL80127 Right hand telescopic rear view mirror


Rear windscreen wiperA large rear windscreen wiper, with intermittentswitching, maintain good vision in bad weatherconditions. Micro-switches are used to isolate wipermotor when the windscreen is open.


Field office

The field office for the 6030 Series tractors is a largeportfolio pouch where papers, operator manuals, musiccassettes, personal notes and implements information,or even a laptop computer can be stored.

The entire unit is removable to be carried like a briefcase. Its base is also pre-wired to accommodateelectronic devices like mobile telephones, or laptopcomputers. The lid provides a flat writing surface.



Sun visor

Fold down sun visor to keep that low level sun out ofthe operator’s eyes, from dawn to dusk.


Sunshade front or rearThe John Deere pull-down sunshade improveoperator’s comfort on sunny days by blocking directlight and reducing glare. In addition, they eliminateheat build-up in the cab. Due to an independentvertical adjustment the shades can be lowered andraised to any desired position - for highest operator’scomfort. This kit can be mounted to the front or rearwindow and include all needed hardware for fieldconversion - for an easy and convenient installation.


Code Bundle Description9100 AL179028 Rear windscreen wiper

Code Bundle Description9220 AL178985 Field Office without beverage holder

Bundle Description Remark QTYAL66414 Socket outlet, 3-pins 1

AL114895 Wiring harnessfor 3-pin socket 1

Code Bundle DescriptionAL157620 Sun visor installation

Code Bundle DescriptionAL174359 Sunshade front or rear


Beverage coolerSpecifically designed for the operator’s station thebeverage cooler can be securely stored and easilyremoved. Especially on hot days the operator willappreciate the insulating capacity keeping food anddrinks cool.


Note: the cool box cannot be installed on tractorsequipped with cup-holder AL163826

Bottle holder

John Deere offers a new bottle holder for convenientand safe storage of bottles in 6030 Series cabs. Ruggedplastic provides the accustomed John Deere quality.The bottle holder is installed underneath the operator’sseat in the corner between the step in the floor and theconsole.


Note: not in combination with suspendedinstructional seat

Cup-holder


Note: the cup-holder cannot be installed on tractorsequipped with cool box AL112070

AshtrayThe ashtray is offered with hinged lid and made ofnon-flammable materials. The design conforms to therequirements of the accustomed John Deere design.The installation is easy because the ashtray fits to theexisting recess.



9215 AL112070 Cool box (incl. fastening straps,bracket and hardware)

Code Bundle Description9216 AL156731 Bottle holder, left hand

Code Bundle Description9218 AL163826 Cup-holder on front right post

Code Bundle DescriptionAL164673 Ashtray


Chock Block



2-Post roll guard

Models: without cab: 6130 - 6630 and 6534

Air conditioning systemThe 6030 air conditioning system is powerful enoughto keep a comfortable in-cab temperature, whatever theoutside conditions are. The air conditioning systemuses ozone-friendly FKM10446 refrigerant.

Models: cab only: 6130 - 6430



Code Bundle DescriptionLG102426 Chock Block


AL156154 Bracket for installation onthe left hand side 1

AL167955 Bracket for installation onthe right hand side 1

Code Bundle DescriptionAL119439 2-Post roll guard

Code Bundle DescriptionAL181222 Air conditioning system, 4 cyl.


AL180674 Bundle forair conditioning system 1

AL174402 Refrigerant hose with air-brakes 1AL174403 Refrigerant hose without air-brakes 1AL163559 Receiver dryer 1

L167673 Console, airconditioning compressor without air-brakes 1

AL157596 Deflexion roll without air-brakes 1AL180760 Refrigerant hose with air-brakes 1AL176192 Refrigerant hose without air-brakes 1

L114468 Poly-v-belt,2515 mm length

6130 and 6230with air-brakes 1


6130 and 6230without air-brakes 1


6330 withair-brakes 1


6330 withoutair-brakes 1

L114292 Poly-v-belt,2500 mm length 6430 1

R128660 Pulley for fan 6130 and 6230 1R128659 Pulley for fan 6330 and 6430 1FKM10446 Refrigerant 0,09





Conversion from rear tiltableto front tiltable roof hatchEnhance visibility to the front and ease loader workwith the new conversion kit for roof hatch opening tothe front.

John Deere offers the new conversion kit to changerear opening roof hatches to front opening. Thereforethe roof hatch is turned around and installed in reversedirection.

A roof hatch opening to the front allows bettervisibility to the front which is especially importantduring front loader work. It also helps to protect yourback as you can comfortably lean back in your seatwhile observing what happens in front above you. Inaddition, you can benefit from a better air circulationin the cab with a roof hatch opening in drivingdirection.

The kit contains all needed parts as well as aninstallation instruction. Please note that the kit canonly be installed if the tractor is already equipped witha roof hatch ex factory.


Note:can only be installed if the tractor already has aroof hatch ex factory

Code Bundle DescriptionAL181223 Air conditioning system, 6 cyl.


AL180674 Bundle forair conditioning system 1

AL179099 Refrigerant hose with air-brakes 1AL179098 Refrigerant hose without air-brakes 1AL163559 Receiver dryer 1

L167673 Console, airconditioning compressor without air-brakes 1

AL157596 Deflexion roll without air-brakes 1AL180760 Refrigerant hose with air-brakes 1AL176192 Refrigerant hose without air-brakes 1


6530 and 6534with air-brakes 1


6530 and 6534without air-brakes 1













L169990 Poly-v-belt,773 mm length 6930 1

R128660 Pulley for fan 6530, 6534and 6630 1

R128659 Pulley for fan 6830 1L169970 Pulley for fan 6930 1FKM10446 Refrigerant 0,09


AL180462 Conversion kit from rear tiltableto front tiltable roof hatch


5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).

Front base weights


Note: not compatible with front PTO

Models: cab only: 6130 and 6230

Note: not compatible with front PTONote: if tractor is equipped with a 551 Series front

loader only this front weight support can beinstalled (as it is dimensionally smaller thanAL176563 front weight support, 60 kg)


Note: not compatible with front PTO

Quick-tatch weights

Models: 6130 - 6630, 6534, cab only: 6830 and 6930, 6225 - 6525

Note: includes 10 x 50 kg left (L38449)and 10 x 50 kg right (L38450)

Front weight stop kitThe attachment kit includes two special couplingweights weighing 50 kg each that can be used within afront weight package to create a trailer coupling. Thetotal kit weighs 100 kg.



8770 AL176563 Front weight support, 60 kg(for max. 14 quick-tatch weights)






AL71258 Set of 20 quick-tatch weights, 50 kgeach

Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg


Mounting kitsFor 8 - 18 quick-tatch weights




Pick up weight - 900 kgThe pick-up weight has 900 kg and fits on all baseweights. They can also be mounted on a front hitch oron the rear hitch of the tractor using the center linkbracket option code.


Note: for tractors with MFWD only, cannot beinstalled in combination with front weights.


AL119967 Mounting parts for 6, 8, 10 quick-tatchweights


AL119968 Mounting parts for 12 & 14 quick-tatchweights


AL82932 Mounting parts for 16 & 18 quick-tatchweights

Code Bundle Description9508 AL112166 Pick up weight, 900 kg


Center link bracketRequired, if pick-up weight is used on the rear or front3-point hitch. Includes two spacer bushings, if 400 kgcentre pick-up weight section only is used in the 3-point hitch.


Front shields

Models: 6130 - 6430

Models: 6530, 6534, 6630, cab only: 6830 and 6930

REAR WHEEL WEIGHTS

Rear wheel weight - 38,5 kg


Note: Includes first set of parts bolted to the rim(base mounting parts).


Note: Includes additional set of parts (if basemounting parts included in AL119955 areinstalled).


9515 AL113121 Center link bracket for pick up weight(with distance tubes)


AL157299 Front shield(for 4 cylinder tractors)


AL157298 Front shield(for 6 cylinder tractors)


9520 AL119955 Rear wheel weight set, 77 kg(2 x 38,5 kg)


9520 AR56632 Rear wheel weight set, 77 kg(2 x 38,5 kg)


Rear wheel weight - 55 kg


Note: Includes first set of parts bolted to the rim(base mounting parts).


Note: Includes additional set of parts (if basemounting parts included in AR56636 areinstalled).


Note: Please order in addition mounting partsaccording to parts catalog.


9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)


9525 AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)


AL176898 Rear wheel weight set on palette,(20 x 55 kg)


5.3 CHASSIS PARTS

Rigid front fendersFor safer high speed road transport and reduced tractorsoiling. Large, full-coverage flexible front fenderswith wide range of adjustments to adapt to thedifferent tread settings to protect the cab from mud anddebris.

Front fenders for 2WD tractors

Models: 6130 - 6530, 6534, 6225 - 6525

Front fenders for 4WD tractors






Conversion from rigid front fenders toturnable front fenders


Note: only for front fenders with single arm supportfrom tractor serial no. XXXXXX


Code Bundle Description8840 AL180215 2WD front fenders


8841 AL180095 MFWD rigid front fenders,370 mm width










AL205783 Conversion kit from rigid frontfenders to turnable front fenders


L173579 Strapfor tractors withfront fenders of370, 420 and 480mm width

2

L173580 Strapfor tractors withfront fenders of 540and 620 mm width

2

L158118 Bumper 2

37M7199 Special hex headscrew M6X25 2

AL165335 Fender stop panelfor 4 cyl. tractorswith front loaderapplication

1

AL165336 Fender stop panelfor 6 cyl. tractorswith front loaderaplication

1


Turnable front fendersA single arm fender for MFWD axles offers a greatersteering angle. It stops at the frame and turns while thetires move further until the maximum steering angle isreached. The turning circle now is the same as ontractors without fenders.


Note: for front loader application an additional fenderstop panel AL165335 (4 cyl. tractors) orAL165336 (6 cyl. tractors) has to be orderedseparately

For tire sizes:• 11.2R20• 11.2R24• 11.2R28• 12.4R24• 12.4R28• 13.6R24• 13.6R28• 280/70R16• 280/85R24• 280/85R28• 320/70R24• 320/85R24• 320/85R28• 340/85R24• 340/85R28• 360/70R24



For tire sizes:• 14.9R20• 14.9R24• 14.9R28• 16.9R24• 16.9R28• 16.9R30• 375/70R20• 380/70R24• 380/70R28• 380/85R24• 380/85R28• 380/85R30• 420/65R24• 420/70R24• 420/70R28• 420/85R24• 420/85R28• 420/85R30



For tire sizes:• 440/65R24• 480/65R24• 480/65R28• 480/70R24• 480/70R28• 480/70R30

Code Bundle Description8842 AL205773 Turnable front fender, 370 mm width






For tire sizes:• 520/60R28• 540/65R24• 540/65R28• 540/65R30• 540/75R28



For tire sizes:• 600/60R28• 600/60R30• 600/65R28

Fender side extensions

The fender extensions are a one piece design. They arecompatible for use with snow chains on the rearwheels, for example for forestry applications. Coverlarge tires and significantly reduce soiling of tractorand cab.


For tire sizes:• 18.4R38• 460/85R38


For tire sizes:• 13.6R38• 14.9R38• 16.9R34• 16.9R38• 18.4R34• 18.4R38• 420/85R38• 460/85R38• 480/70R34• 480/70R38• 520/70R38• 540/65R38


For tire sizes:• 20.R38• 520/70R38• 520/85R38• 580/70R38• 600/65R38• 650/65R38




8900 AL174767 Fender side extension, 110 x 15 mm(4.33 x 0.59 inch)







For tire sizes:• 20.R38• 520/70R34• 520/70R38• 520/85R38• 540/65R38• 600/65R38• 650/65R38

Fender extensionFor heavy duty work and bad weather conditions JohnDeer offers a mud flap kit for 6030 Series tractors. Themud flap provides an additional protection to avoiddirt on your tractor and following vehicles. It is madeof rugged and flexible rubber, that bears up againstworst application conditions. The kit fits to all 6030Series tractors with a 190 mm width fender extensions.


Note: Can only be installed if the tractor already has a190 x 65 mm side-extension on its fenders.

Mud Guards

Models: 6130 - 6430

Models: 6530, 6534, 6630, cab only: 6830 and 6930



Code Bundle DescriptionAL159975 Fender extension

Code Bundle DescriptionAL174141 Mud guard for step

Code Bundle DescriptionAL174142 Mud guard for step


5.4 AXLES

ExtensionsRear axleRear axle extensions are available to match differenttread settings.

Models: 6130 - 6430, 6225 - 6425

Note: In combination with rear wheels with bolt circlemeasuring 203 mm in dia.

Note: Increased tread setting from 1912 mm-1976 mm

Models: 6130 - 6430, 6225 - 6425

Note: In combination with rear wheels with bolt circlemeasuring 203 mm in dia.


Models: 6130 - 6430, 6225 - 6425

Note: for 6130 - 6430 order addionally:1 x L116668 reinforcement ring


Front axle

Models: 6130 - 6430, 6225 - 6425

Note: In combination with front wheels with bolt circlemeasuring 275 mm in dia.

Note: Increased tread setting from 2016 mm-2134 mmCode Bundle Description

AL156776 Distance hub, 30 mm, for rear axleextension


AL156779 Distance hub, 44 mm, for rear axleextension


AL156777 Distance hub, 111 mm, for rear axle,treadadjusting


AL156778 Distance hub, 60 mm, for centeringthe front wheels


Track extension front and rear axleThe extended track and extra-wide vehicle lighting areintended only for 6-cylinder tractors with a 335 mm(13.19 inch) hole-circle diameter on front wheels andwith a 275 mm (10.83 inch) hole-circle diameter onrear wheels.

In order to work as efficient as possible, progress inrow planting and the use of wider attachments demandflexible track widths. To meet these demands JohnDeere offers track extensions for 6-cylinder tractormodels.

With the help of the extended track, it is possible tocover more rows at once and to ride within the rowswithout affecting cultivations or banks. For sprayerapplications the new field installation kits provideanother advantage: the extended track of the tractorallows a superior support and balance adjustment ofthe sprayer.

Two different extensions are available:• Extension 2 x 94 mm provides a track extension to

2000 mm. Depending on the overall tractor width,additional lighting kits for extra-wide vehicles areavailable.

• Extension 2 x 219 mm provides a track extensionto 2250 mm. Depending on the overall tractorwidth, additional lighting kits for extra-widevehicles are available.

Models: 6630, cab only: 6830 and 6930

Note:Maximum overall width of 2550 mm (100.4 inch)Note:For maximum overall width of 2550 - 2750 mm

(100.4 - 108.3 inch) extra-wide vehicle lightingis needed, please order in addition 1 x AL169786

Note:After installing the track extension please checkposition of front fenders and adjust if needed

Note:After installing the track extension please checksteering angle and adjust if needed

Note:Must NOT be installed on tractors with dualwheels

Note: Important when extending the track of the rearaxle and rear wheels are attached by studs andwheel nuts: length of studs has to be 120 mm(4.72 inch) and wheel nuts has to be M20 x 1.5.If required, please order 16 x L150648 (stud)and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rearaxle and rear wheels are attached by wheelbolts: wheel bolts has to be M20 x 1.5 x 95 capscrews. If required, please order 16 x L152520(wheel bolt) separately.


Note:Maximum overall width of 2750 - 3000 mm(108.3 - 118.11 inch)

Note:For maximum overall width of 2750 - 3000 mm(108.3 - 118.11 inch) extra-wide vehicle lightingand warning sign is needed, please order inaddition 1 x AL164386

Note:After installing the track extension please checkposition of front fenders and adjust if needed

Note:After installing the track extension please checksteering angle and adjust if needed

Note:Must NOT be installed on tractors with dualwheels

Note: Important when extending the track of the rearaxle and rear wheels are attached by studs andwheel nuts: length of studs has to be 120 mm(4.72 inch) and wheel nuts has to be M20 x 1.5.If required, please order 16 x L150648 (stud)and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rearaxle and rear wheels are attached by wheelbolts: wheel bolts has to be M20 x 1.5 x 95 capscrews. If required, please order 16 x L152520(wheel bolt) separately.


AL162738 Track extended to 2000 mm(78.74 inch)


AL179433 Track extended to 2250 mm(88.58 inch)



Note:Maximum overall width of 2750 - 3000 mm(108.3 - 118.11 inch)


Note: Maximum overall width of 2750 mm (108.3 inch)


AL164386 Extra-wide vehicle lighting andwarning sign

Code Bundle DescriptionAL169786 Extra-wide vehicle lighting


5.5 BRAKES AND STEERING

Hydraulic trailer brakeThe hydraulic trailer brake system gives a powerful,safe braking function. The tractor brake-pedal operatedsystem gives a trailer braking function proportional tothe pressure applied to the pedal.

The field kits below permit the tractor to be retro-fittedwith an hydraulic trailer brake.

Models: 6130 - 6630 and 6534


Pneumatic trailer brakeThe pneumatic trailer brake system consists basicallyof a two line system. This is the same as used today oncommercial vehicles.

Pre-braking function:• short brake pedal travel allows braking of the

trailer without braking the tractor. This feature isrequired to control the trailer and prevent jackknifing.

• A quick release valve opens the trailer brakeimmediately after release of the brake pedal forbetter acceleration.

Single line systems for pneumatic trailer brakes areavailable as well. These kits are supplementary to thedual-line systems, they can not be used stand alone.The dual-line system has to be installed first before thesingle line system should be ordered.

The field kits below permit the tractor to be retro-fittedwith a pneumatic trailer brake system. The pneumatictrailer brake system may be installed only on tractorsequipped with a handbrake.




Note:without front axle brakeNote: Depending on the options of the tractor,

additional spare parts may be required.

Code Bundle Description9350 AL180827 Hydraulic trailer brake

Code Bundle Description9350 AL180828 Hydraulic trailer brake


AL171459 Pneumatic trailer brake,single-line system


L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1



9356 AL171451 Pneumatic trailer brake,dual-line system


AL171455 Additional partsfor air supply 1

AL171488Additional parts for enginewith air-conditioning(dual-line system)

6130 - 6430 1


6530, 6534and 6630 1

AL171490Additional parts for enginewithout air-conditioning(dual-line system)

1

AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1





Note: without front axle brakeNote: Depending on the options of the tractor,

additional spare parts may be required.




9356 AL171453 Pneumatic trailer brake,dual-line system


AL171455 Additional partsfor air supply 1


1

AL171496Additional parts for enginewithout air-conditioning(dual-line system)

1

AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1




AL180574Air pressure gauge for pneumatictrailer brake, single-line systemand dual-line system




5.6 STORAGETool boxAn external detachable and lockable tool box withconvenient carrying handle is located in front of thecab.

It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.


Note: The toolbox is secured to the left hand-gripof the cab using a strap.

This tool box is attached to left-hand side (on 4-cylinder tractors) or to right-hand side (on 6-cylindertractors) of main frame.



8850 AL175285 Sheet metal tool box, mounted at thefront of the cab on the left hand side


8850 AL156255 Sheet metal tool box, mountedto main frame


Additional storage container - 45l

With a capacity of 45 l and a 45 kg maximum payloadthis new sheet metal storage container offers additionalspace, e.g. for rubber boots, oil cans, bulky tools,grease guns etc. Equipped with 2 handles at the side itcan easily be carried. With the help of the includedquick lock pin the container can be closed rapidly. Thefastening on the back allows a quick installation to allexisting front weights: base weights, front weights andthe 900 kg pick up weight.


Note: 45 kg maximal payload; only for front installation:attachable to base weights, front weights and 900kg pick up weight.

Code Bundle DescriptionAL120005 Storage container, 45 l


5.7 HITCHES AND ASSOCIATEDEQUIPMENT

Release cablesFor upper and lower link hooks including hardware(screws, clamps, holder etc.)


Remote control switches for 3-point hitch,fender-mounted rear


Note: include 2 switches for LH and RH installationNote: This software related field installation kit

must be ordered with indication of tractorserial number!

Remote control switches for PTO,fender-mounted rear


Note: include 2 switches for LH and RH installationNote:This software related field installation kit

must be ordered with indication of tractorserial number!

Draft-Sensing Pin




AL81619 Cables for controlling the center linkand draft links


AL180493 2 remote control switchesfor 3-point hitch


AL180494 2 remote control switchesfor PTO

Code Bundle DescriptionAL116748 Draft-Sensing Pin

Bundle Description Remark QTYL170711 Panel 1L102219 Paste 1


Stabilizer bar “Economy”An adjustable stabilizer bar provides positive controlof lateral sway when using mounted equipment on6030 Series tractors. For use only with cat. II and cat.III flat bar draft links.


Note: It can be used RH or LH;not for use with high-clearance drawbar;if both, RH and LH stabilizers are desiredplease order two of these kits.


Note: It can be used RH or LH;not for use with high-clearance drawbar;if both, RH and LH stabilizers are desiredplease order two of these kits.

Automatic stabilizer barAutomatic stabilizer bars offer for the respectiveimplements the possibility to have:

• lateral sway over a self defined lower rangeand no sway above, or

• no sway over the whole range

Models: 6130 - 6630, 6534, 6225 - 6525


Code Bundle DescriptionAL117961 Stabilizer bar “Economy”

Code Bundle DescriptionAL151119 Stabilizer bar “Economy”


AL176759

Automatic stabilizer bar

(include automatic stabilizer barfor one side and shock absorberfor the other side)


AL176760

Automatic stabilizer bar

(include automatic stabilizer barfor one side and shock absorberfor the other side)


Stabilizer chains with sway control blocksFor almost universal implement control.

Models: 6130 - 6630, 6534, 6225 - 6525

Note: for tractors with telescopic lift link or flat steellift link order in addition:

Lock for draft link hooksWhen implements with asymmetrical load areattached, or when driving through high-growingbushes and trees, the draft links must be securedagainst opening accidentally.


Swinging drawbar

Drawbars are adjustable in length and the swingingfeature can also be locked out.

Models: 6130 - 6630, 6534, 6225 - 6525


Note: not used with Powrshift transmission

Code Bundle DescriptionAL80849 Stabilizer chains

Bundle Description QTYL79378 Console for cat. II or cat. III 219M7489 Screw M16x45 for cat. II 419M7409 Screw M16x50 for cat. III 4

Code Bundle DescriptionAL165485 Lock for draft link hooks

Code Bundle Description9441 AL80054 Swinging drawbar with hammer strap


9441 AL81349 Swinging drawbar with hammer strap,includes swinging drawbar L115073



Note: used with Powrshift transmission

Guide Ball HolderTo store the guide balls for hook type 3 point hitch andtop link quick couplers just where they are needed.

Models: 6130 - 6530, 6534, 6225 - 6525


Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch. John Deere now offers the solution- the hitch holder for the upper wagon hitch. Theholder is a convenient solution that can easily bemounted within minutes onto all kinds of front weightswith coupling recess. The wagon hitch can easily beaffixed and is stored in a convenient height you canreach without stooping. The holder is adjusted withtwo fixing screws that again can be adjusted in twowidths depending on the weight the holder has beenmounted onto.



9441 AL119419 Swinging drawbar,includes swinging drawbar AL151017

Code Bundle Description9463 AL179161 Guide Ball Holder Cat.II

Code Bundle Description9463 AL180047 Guide Ball Holder Cat. III

Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch


Load control shaft, support


Note: from serial no. XXXXXX

Center link




Hydraulic Center linkThe length of the hydraulic center link can be adjustedfrom the driver’s seat using the 3rd selective controlvalve. In addition, the center link can be actuated fromthe remote control switches on the fender.

Models: 6130 - 6630 and 6534


Code Bundle DescriptionAL160835 Load control shaft support


7352 AL176534Center Link with hook and ballbushing, Cat. 2(rear hitch lift capacity 20 - 27 kN)


AL176533Center Link with hook and ballbushing, Cat. 3(rear hitch lift capacity 31 - 41 kN)


AL176532Center Link with hook and ballbushing, Cat. 3(rear hitch lift capacity 43 kN)


AL174550 Hydraulic Center Link(Cat. 3/70)


AL174551 Hydraulic Center Link(Cat. 3/90)


Increased lift capacityof hydraulic lift cylinders

One of the primary advantages of fluid power is theincredible power density. If more lift capacity isrequired John Deere offers new hydraulic lift cylinderswith higher lift capacity for 6130 - 6630 models. Theselift cylinders produce a very large amount of usableforce, provide ample implement handling capabilityand are easy to install. They are made of rugged,reliable and corrosion resistant material.

The following field installation kits include all neededspare parts e.g. collar pins, split pins, bushings as wellas the installation instruction.

Models: 6130 - 6330


Models: 6430, 6530, 6534


Models: 6630


Hydraulic pick-up hitch (SCV controlled)

Models: 6130 - 6630, 6534, 6225 - 6525

Models: 6130 - 6630, 6534, 6225 - 6525

Note: Depending on the options of the tractor,additional spare parts may be required:


AL180945Field installation kit - 2 lift cylindersØ: 75 mm (2.95 inch)length: 175 mm (6.89 inch)






AL174109Field installation kit forhydraulic pick-up hitch(manually actuated)


AL174443Control components for upgradingAL174109 to electro-hydrauliccontrolled pick-up hitch


AL174516 Inlet valve forPrio 2 option 1

AL174348 3-terminal socketat C-Post 1

L167830 Spacer, 58 mm 1L167831 Spacer, 44 mm 1




Note: Depending on the options of the tractor,additional spare parts may be required:

Low position hitcheswith 3-in-1 wagon hitch




AL174110Field installation kit forhydraulic pick-up hitch(manually actuated)


AL174444Control components for upgradingAL174110 to electro-hydrauliccontrolled pick-up hitch


AL174516 Inlet valve forPrio 2 option 1

AL174348 3-terminal socketat C-Post 1

L167830 Spacer, 58 mm 1L167831 Spacer, 44 mm 1

Code Bundle Description9419 AL177172 Rail with piton fix insert slider

Code Bundle DescriptionAL177174 Piton fix insert slider




Low position wagon hitchesfor 9-position rail


Note: for 9-position rail only


Note: for 9-position rail only

Code Bundle Description9405 AL177173 Rail with ball typ insert slider

Code Bundle DescriptionAL177175 Ball typ insert slider


AL176731 Wagon hitch height-adjustable,piton fix


AL176726 Wagon hitch height-adjustable,ball


Forced steering systemfor wagon hitch height-adjustable(ball type)



Forced steering systemfor insert slider (ball type)



Yoke for draft link supportHinged to the left and right hand side rear axle, itprotects the draft sensor pins from shock loads underextreme draft work.



AL176727Forced steering system (two sides)for wagon hitch height-adjustable,ball type


AL176728Forced steering system (one side)for wagon hitch height-adjustable,ball type


AL176729 Forced steering system (two sides)for ball typ insert slider


AL176730 Forced steering system (one side)for ball typ insert slider

Code Bundle DescriptionAL78129 Yoke for draft link support


5.8 VANDALISM PROTECTION KITS

Models: 6130 - 6630, 6534, 6225 - 6525

Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit providesindividual security by individual keys for allequipment kept inside the cab. The kit comes with fourkeys, in case of damage or loss a blank key can beordered.


Note: if needed please order in addition:


AL110170 Field kit, latch for oil filler neck,transmission - vandalism protection

Code Bundle DescriptionAL71345 Security door lock kit

Bundle Description QTYAL71350 Blank key 1


Lockable fuel tank cap


Vandalism protection

Models: 6130 - 6430

Models: 6530, 6534 and 6630, cab only: 6830 and 6930

Code Bundle DescriptionAL113087 Lockable fuel tank cap Code Bundle Description

AL175117Vandalism protection(include lock for side panel and hood,latch for transmission oil filler neck andlockable fuel tank cap)


AL175118Vandalism protection(include lock for side panel and hood,latch for transmission oil filler neck andlockable fuel tank cap)


Numerical Index

Bundle No. Page Bundle No. PageAL71258 22 AL163826 19AL71345 46 AL164386 32AL78129 45 AL164673 19AL80054 39 AL165485 39AL80126 17 AL165650 40AL80127 17 AL169786 32AL80849 39 AL171451 33AL81349 39 AL171453 34AL81619 37 AL171459 33AL82932 23 AL173288 1AL110170 46 AL173291 2AL112070 19 AL173292 3AL112166 23 AL173294 3AL113087 47 AL173422 2AL113121 24 AL173423 3AL116748 37 AL173569 16AL117734 16 AL173570 16AL117961 38 AL173828 16AL118241 7 AL173953 8AL119419 40 AL173954 8AL119439 20 AL174109 42AL119955 24 AL174110 43AL119956 25 AL174141 29AL119964 22 AL174142 29AL119967 23 AL174359 18AL119968 23 AL174443 42AL120005 36 AL174444 43AL151119 38 AL174550 41AL151224 17 AL174551 41AL156243 7 AL174696 12AL156255 35 AL174697 12AL156731 19 AL174767 28AL156776 30 AL174768 28AL156777 30 AL174769 28AL156778 30 AL174770 29AL156779 30 AL175117 47AL157298 24 AL175118 47AL157299 24 AL175285 35AL157620 18 AL175598 13AL158520 8 AL175599 14AL158728 12 AL175679 17AL158785 11 AL176532 41AL159939 7 AL176533 41AL159975 29 AL176534 41AL160835 41 AL176563 22AL162738 31 AL176564 22AL163513 7 AL176565 22

Bundle No. Page Bundle No. PageAL176726 44 AL180574 34AL176727 45 AL180827 33AL176728 45 AL180828 33AL176729 45 AL180945 42AL176730 45 AL180947 42AL176731 44 AL180949 42AL176759 38 AL181054 5AL176760 38 AL181222 20AL176898 25 AL181223 21AL177172 43 AL202564 9AL177173 44 AL203918 11AL177174 43 AL205773 27AL177175 44 AL205774 27AL178985 18 AL205776 27AL179028 18 AL205779 27AL179161 40 AL205781 28AL179254 15 AL205783 26AL179255 15 AR56632 24AL179256 13 AR56636 25AL179257 14 LG102426 20AL179315 5 RE67013 11AL179316 6 RE67014 11AL179433 31 RE67015 11AL179967 9 RE67016 11AL179969 9AL179970 9AL179971 9AL179973 10AL179975 9AL180047 40AL180063 3AL180095 26AL180097 26AL180099 26AL180101 26AL180103 26AL180201 12AL180215 26AL180369 4AL180370 4AL180371 5AL180372 5AL180374 5AL180376 5AL180462 21AL180493 37AL180494 37

ATTACHMENTS - John Deere IT · 6030 series tractors-4 attachments - factory and field installed issue 03-2010 (eame) 2 hydraulics 2.1 mechanically-actuated selective control valves

Documents