The PCB (the green plate with the connectors) is carefully removed from the black bu>om plate The cable is pushed through the hole in the black bu>om plate. Connec@ng the Keypad to the PolyLock for the PolyCombo When the PolyCombo is a>ached to the door:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The PCB (the green plate with the connectors) is carefully removed from the black bu>om plate
The cable is pushed through the hole in the black bu>om plate.
Connec@ng the Keypad to the Poly-‐Lock for the Poly-‐Combo
When the Poly-‐Combo is a>ached to the door:
Connec@ng the Keypad to the Poly-‐Lock for the Poly-‐Combo
The cable is a>ached like this Slide the PCB carefully back into place, as when you received the Poly-‐Combo
Connec@ng the Keypad to the Poly-‐Lock for the Poly-‐Combo
When a>ached the red markings on the cable and the connector should be poin@ng the same direc@on Before you push the cable into place, the small brown “flaps” on the connector are Released. Now you are able to push the cable into Posi@on. Push the two brown “Flaps” back to lock the cable into place in the connector.